Benutzeranleitung / Produktwartung LaserJet 2200 des Produzenten HP
Zur Seite of 178
6-1/2” x 9" FRONT COVER 6-1/2" x 9" BACK COVER copyright © 2001 Hewlett-Packard Company www .hp.com/support/lj2200 english hp LaserJet 2200 hp color LaserJet xxxx 3/8” x 9" SP.
.
hp LaserJet 2200 ser ies pr inters User Guide.
Hewlett-P ackard Compan y 11311 Chinden Boule v ard Boise, Idaho 83714 U .S.A. Copyright and License Cop yright Hewlett-P ackard Company 2001 All Rights Reser v ed. Except as allow ed by cop yright laws or herein, reproduction, adaptation, or translation without prior wr itten per mission is prohibited.
EN iii HP Customer Care (Service and Suppor t) HP Customer Care (Service and Suppor t) Online Services: for 24-hour access to inf or mation o ver your modem, we suggest these ser vices: W orld Wide W .
iv EN HP direct or dering f or accessories or supplies: Call 1-800-538-8787 (U .S .) or 1-800-387-3154 (Canada). HP Suppor t Assistant compact disc: This suppor t tool off ers a comprehensiv e online inf or mation system designed to provide technical and product inf or mation on HP products.
EN v In - country suppor t number s: If y ou require suppor t after your w arranty has e xpired, additional product repair ser vices, or if y our country is not listed below , see Worldwide Sales and Ser vice Offices.
vi EN.
EN vii Contents HP Customer Care (Service and Support) . . . . . . . . . . . . . . . . . . . . iii 1 Printer Basics Getting to Know the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Printer Configurations . . . . . . . . . .
viii EN Software Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Features in the Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Features in the HP LaserJet Device Configuration and HP LaserJet Utility .
EN ix 5 Service and Support Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 HP Express Exchange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Guidelines for Repacking the Printer.
x EN Appendix C Printer Memory and Expansion Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Printer Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 Installing Memory .
EN Chapter 1 Printer Basics 1 1 Pr inter Basics Getting to Kno w the Printer This chapter provides inf or mation in the f ollo wing areas: ! Printer Configurations ! Printer Features ! Printer Softwar.
2 Chapter 1 Printer Basics EN Printer Configurations Congr atulations on y our purchase of the HP LaserJet 2200 series pr inter! This pr inter is av ailab le in f our configur ations , as descr ibed below . Note T o find out which HP LaserJet 2200 configuration y ou ha v e , look at the label on the front of the printer .
EN Chapter 1 Printer Basics 3 Printer Features F ast Pr int Speed ! Prints letter-size paper 19 pages-per-minute (ppm) or A4-siz e paper 18 ppm (with Motorola RISC-based f orm atter). Built-in Duple xing ! Printing on both sides of paper (two-sided printing) is a standard f eature of the printer , with the duple xer integ rated into the paper path.
4 Chapter 1 Printer Basics EN PS Language and Fo n t s ! P ostScr ipt Le v el 2 emulation with 35 b uilt-in PS language f onts included. A utomatic Language Switching ! When optional printer languages.
EN Chapter 1 Printer Basics 5 Printer Software The printer comes with helpful software including printer dr iv ers and optional software . For easy printer setup and access to the full range of printer features, it is strongly advised that you install the software provided.
6 Chapter 1 Printer Basics EN The f ollo wing tab le lists the a v ailable softw are f or your printing system. Note Software f or DOS is not included with this pr inter . *A vailab le only on the World Wide W eb . Windows 3.x Windows 9x/Millen Windows NT 4.
EN Chapter 1 Printer Basics 7 Windo ws Installation There are diff erent Windo ws installation methods, depending on the type of cab le y ou connected: ! If y ou connected a parallel cab le , see the section below . ! If y ou connected a USB cab le , see If Y ou Connected a USB Cab le.
8 Chapter 1 Printer Basics EN Windows 95 a. The “ Update De vice Driv er Wizard ” window should appear on the computer displa y . b . Place the HP LaserJet 2200 CD in the CD-R OM drive . c. Depending on the v ersion of Windo ws 95: • Click Ne xt> (if av ailable) and then skip to step 3 belo w .
EN Chapter 1 Printer Basics 9 3. F ollo w the instructions on the screen to install the software. Note Bef ore installation is complete , make sure that there is a check mark ne xt to “ Print a test page ” (when the prompt appears).
10 Chapter 1 Printer Basics EN If Y ou Connected a USB Cable Note Windows 3.1x, 95, and NT 4.0 do not suppor t USB cab le connections. The f ollo wing instructions are f or computers running Windows 98, 2000, or Millennium. If y ou want to connect a USB cab le to y our Macintosh, see Macintosh Installation.
EN Chapter 1 Printer Basics 11 3. F ollo w the instructions on the screen to install the software. Note Bef ore installation is complete , make sure that there is a check mark ne xt to “ Print a test page ” (when the prompt appears).
12 Chapter 1 Printer Basics EN Software f or Windo ws Printer Drivers Printer dr iv ers access the printer ’ s features and allo w the computer to communicate with the printer . Choose a pr inter driver based on the wa y you use the printer . ! Use the PCL 6 driver to tak e full adv antage of the printer ’ s f eatures .
EN Chapter 1 Printer Basics 13 C o nt ro l Pan e l S i mul a t o r The control panel simulator is a tool to help understand the control panel lights. When the lights on y o ur control panel are lit up.
14 Chapter 1 Printer Basics EN HP JetSend (W eb - Windows 9x/NT 4.0/ Millennium onl y) What is JetSend? JetSend is a communications protocol de veloped b y He wlett-P ackard that allows de vices to e xchange inf orm ation directly without driv ers or cab les.
EN Chapter 1 Printer Basics 15 Macintosh Installation Note The Apple LaserWriter 8 dr iv er must be installed to use the PPD . Use the Apple LaserWriter 8 dr iv er that came with y our Macintosh. Bef ore beginning installation, turn off vir us protection.
16 Chapter 1 Printer Basics EN Software For Macintosh Computer s P ostScript Printer Description Files (PPDs) PPDs, in combination with the LaserWriter driver , access the pr inter f eatures and allo w the computer to communicate with the printer . An installation progr am f or the PPDs is pro vided on the HP LaserJet 2200 CD .
EN Chapter 1 Printer Basics 17 Network Installation The software on the HP LaserJet 2200 CD supports network installation with Novell NetW are 3.2, 4.x, and 5.x or a Microsoft network (except Windows 3.1x). For network installation on other operating systems, go to http://www .
18 Chapter 1 Printer Basics EN T o Install the Printer Software Note The f ollo wing instructions are f or Windows computers only . If you connected a network cable to y our Macintosh, see Macintosh Installation. 1. Place the HP LaserJet 2200 CD in the CD-R OM drive .
EN Chapter 1 Printer Basics 19 Software f or Netw orked Computers HP W eb JetAdmin HP W eb JetAdmin is intended f or pr inter management in commercial and enter prise networks. This browser-based softw are can be installed on a suppor ted ser ver platf or m.
20 Chapter 1 Printer Basics EN How to Access HP W eb JetAdmin Once the HP W eb JetAdmin softw are has been installed on the suppor ted ser ver platf or m, you can access HP W eb JetAdmin in a suppor ted web browser from a client w orkstation by entering one of the f ollo wing URLs: ! http://ser v er .
EN Chapter 1 Printer Basics 21 Software Installation Tips If y ou hav e inter net access, y ou can do wnload drivers from the W orld Wide W eb or HP ’ s FTP ser v ers.
22 Chapter 1 Printer Basics EN What other software is av ailable to me? See Printer Software f or descriptions of the optional printing system software a vailab le f or installation. Note Chec k the ReadMe file provided on the HP LaserJet 2200 CD f or additional software included and suppor ted languages .
EN Chapter 1 Printer Basics 23 Contr o l P anel Buttons Button Usage The printer has two buttons: J OB C ANCEL and G O . Job Cancel Press J OB C ANCEL to cancel a job the printer is currently pr inting.
24 Chapter 1 Printer Basics EN Printing with the F ast Infrared P or t (Wireless Printing) The f ast infr ared (FIR) por t is located on the lower right cor ner of the printer . This por t is compliant with the specifications deter mined by the Infrared Data Association (IrD A).
EN Chapter 1 Printer Basics 25 Wireless Printing Instructions 1. Mak e sure the printer is in ready state (Ready light on). 2. Align an IrD A-compliant computer within 1 meter (3 f eet) of the FIR por t. Ensure that the por ts are f acing each other with no more than a 15 ° angle to either the left and right or abov e and below .
26 Chapter 1 Printer Basics EN Interface P or ts The HP LaserJet 2200 printer includes two interf ace por ts: an IEEE-1284B parallel por t and a USB por t. The HP LaserJet 2200dn and 2200dtn printers also include an HP JetDirect EIO print ser ver card (J4169A) that includes a 10/100 Base-TX por t.
EN Chapter 1 Printer Basics 27 Accessories and Or dering Information The f ollo wing list of accessories was current at the time of printing. Ordering information and av ailability of the accessor ies ma y change during the life of the printer. F or the most current order ing inf or mation, go to http://www .
28 Chapter 1 Printer Basics EN Cable and Interf ace Accessor ies Enhanced I/O cards HP JetDirect print ser ver m ulti-protocol EIO network cards: ! HP Jet Direct 600N Ether net (10Base-T RJ-45 only) !.
EN Chapter 1 Printer Basics 29 Media HP Multi-pur pose P aper HP brand paper f or a v ariety of uses (1 bo x of 10 reams, 500 sheets each). T o order a sample, in the U .S. call 1-800-471-4701. HPM1120 HP LaserJet P aper Premium HP brand paper f or use with HP LaserJet printers (1 box of 10 reams, 500 sheets each).
30 Chapter 1 Printer Basics EN Supplementar y Documentation (continued) hp LaserJet 2200 series printers User Guide A printed copy of this user guide .
EN Chapter 2 Printing Tasks 31 2 Pr inting T asks Overview This chapter e xplains y our printing options and giv es common printing tasks: ! Purchasing P aper and Other Media ! Media Input Options ! L.
32 Chapter 2 Printing Tasks EN Pur c hasing P aper and Other Media HP LaserJet printers produce excellent print quality documents . Y ou can print on a variety of pr int media, such as paper (including up to 100% recycled fiber content paper), en v elopes , labels , o v erhead transparencies , and custom-siz ed media.
EN Chapter 2 Printing Tasks 33 Media Input Options The printer comes with two paper tra ys. By def ault, the printer dra ws first from T ra y 1. If T ra y 1 is empty , the pr inter dra ws from T ra y 2 (or optional T ra y 3 if it is installed). Tr a y 1 M e d i a S i z e s T ra y 1 adjusts f or sizes from 76 b y 127 mm (3 by 5 in.
34 Chapter 2 Printing Tasks EN T ra y 2 and Optional 250-sheet T ra y 3 Pa p e r S i z e s T ra y 2 and optional 250-sheet T ra y 3 ha v e settings for the f ollowing paper sizes: ! A4 ! A5 ! B5 (ISO and JIS) ! Letter ! Legal ! Ex ecutiv e ! 8.5 b y 13 in.
EN Chapter 2 Printing Tasks 35 Optional 500-sheet T ra y 3 P aper Siz es The optional 500-sheet T ra y 3 has settings f or the f ollowing paper sizes: ! A4 ! Letter See Loading Media into Optional 500-sheet T ra y 3 to change the paper size . See Suppor ted Sizes of P aper f or specific dimensions .
36 Chapter 2 Printing Tasks EN Loading Media into T ra y 1 T ra y 1 (multi-pur pose) holds up to 100 sheets of paper or up to 10 en v elopes. 1 Open T ra y 1 by pulling the front cov er down. 2 Slide out the plastic tra y e xtender . If the media being loaded is longer than 229 mm (9 in.
EN Chapter 2 Printing Tasks 37 Loading Media into T ra y 2 or Optional 250-sheet Tr a y 3 1 Pull the desired tra y out of the printer and remov e any paper . 2 Mov e the side width guides outw ard to match the desired paper size . 3 On the rear paper length guide, press on the b lue tab and adjust it so the pointer matches the desired paper size .
38 Chapter 2 Printing Tasks EN 4 Add the media and mak e sure it is flat in the tra y at all f our cor ners. K eep the media below the height tabs on the paper length guide in the rear of the tra y . 5 Push down on the metal paper lift plate to loc k it in place.
EN Chapter 2 Printing Tasks 39 Loading Media into Optional 500-sheet T ra y 3 Note The Optional 500-sheet T ra y 3 suppor ts only A4 and letter-size paper . 1 Pull the tra y out of the pr inter and remov e any paper . 2 T o adjust f or letter-siz e paper , pull up on the rear stop , or to adjust for A4-size paper , push the rear paper stop down.
40 Chapter 2 Printing Tasks EN Media Output Options The printer comes with two output bins. The top output bin is used when the rear output bin is closed. The rear output bin is used when the rear output bin is open. Note When T ra y 1 and the rear output bin are used together , they pro vide a straight-through paper path f or your print job .
EN Chapter 2 Printing Tasks 41 Printing T asks Note Printing speeds may be automatically reduced when printing special-sized media. Printing on En velopes CA UTION Bef ore y ou load en v elopes in T ra y 1, mak e sure they are undamaged and are not stuc k together .
42 Chapter 2 Printing Tasks EN 4 Place the en v elopes into the tra y shor t-edge in, pr int-side up . The stamp end must enter the printer first. 5 Slide the width guides inward until the y lightly touch the en v elope stac k without bending it.
EN Chapter 2 Printing Tasks 43 Printing on Labels Note Only use labels recommended f or laser printers. See Media Specifications f or more details . ! Print labels from T ra y 1.
44 Chapter 2 Printing Tasks EN Printing on T ransparencies Only use transparencies recommended f or use in HP LaserJet printers, such as HP transparency film. F or order ing inf ormation, see HP LaserJet T ransparency. F or transparency specifications, see T ransparencies.
EN Chapter 2 Printing Tasks 45 Printing on Custom-Sized Media or Car dstoc k P ostcards, 3 b y 5 in. (inde x) cards, and other custom-siz ed media can be printed from T ra y 1. The minimum media size is 76 b y 127 mm (3 b y 5 in.) and the maximum media siz e is 216 b y 356 mm (8.
46 Chapter 2 Printing Tasks EN Printing on Both Sides of P aper (Duplexing) The printer can automatically pr int on both sides of paper . This is called duple xing or two-sided printing. The duple x er suppor ts letter , A4, 8.5 x 13, and legal paper sizes .
EN Chapter 2 Printing Tasks 47 P aper Orientation for Printing Both Sides of P aper (Duple xing) The duple x er pr ints the second side of paper first. P aper needs to be oriented as shown in the illustration belo w . ! F or T ra y 1, load the first side f acing do wn with the bottom, shor t edge tow ard the pr inter .
48 Chapter 2 Printing Tasks EN La y out Options for Printing Both Sides of P aper The f our print or ientation options are sho wn below . These options are a v ailab le when Print on Both Sides is selected from the Finishing tab in the printer dr iv er .
EN Chapter 2 Printing Tasks 49 Printing on Letterhead or Preprinted Forms Note This section describes letterhead or prepr inted f orms or ientation f o r single-sided printing. For duple x (two-sided printing) or ientation, see paper orientation fo r Pr inting on Both Sides of P aper (Duple xing).
50 Chapter 2 Printing Tasks EN Note Do not use letterhead paper that is printed with low-temperature inks, such as those used in some types of ther mograph y . Do not use raised or embossed letterhead. The printer uses heat and pressure to fuse toner to the paper .
EN Chapter 2 Printing Tasks 51 Canceling a Print Job A print job can be stopped from a software application, a print queue, or the J OB C ANCEL b utton. ! If the printer has not star ted pr inting, first tr y to cancel the job within the software application that sent the print job .
52 Chapter 2 Printing Tasks EN Software Features This section lists the common printing features that are controlled through the printer software. Note F or non-Windo ws operating systems , some of these f eatures are a v ailab le through HP W eb JetAdmin (see HP W eb JetAdmin).
EN Chapter 2 Printing Tasks 53 Using the Printer Driver Help (Windo ws Only) Each printer dr iv er has help screens that can be activ ated from the Help b utton in the printer dr iv er . These help screens giv e detailed inf or mation about the specific driv er being used.
54 Chapter 2 Printing Tasks EN Creating and Using W atermarks The W ater mar k options allo w you to specify that te xt be placed “ under neath ” (in the bac kground) of an e xisting document.
EN Chapter 2 Printing Tasks 55 Setting a Custom P aper Siz e Use the Custom P aper f eature to pr int on paper siz es other than standard sizes . Access the Custom P aper f eature from the P aper tab in y our pr inter driv er .
56 Chapter 2 Printing Tasks EN Choosing Print Quality Settings If y ou need adv anced print quality , you can choose custom settings . Access the print quality settings from the Finishing tab in your printer driver . Resolution Options: ! Best Quality - ProRes 1200 f or the best print quality .
EN Chapter 2 Printing Tasks 57 Printing on Different P aper f or the Fir st P a ge Printing on different paper f or the first page of a print job is av ailab le only with the HP PCL 6 printer dr iv er and the Macintosh LaserWriter driver . Access this f eature from the P aper tab in your printer dr iv er .
58 Chapter 2 Printing Tasks EN Features in the HP LaserJet De vice Configuration and HP LaserJet Utility The HP LaserJet De vice Configur ation and the HP LaserJet Utility giv e y ou access to a v ariety of f eatures. Note Settings in the printer dr iv er and software application o v erride printer settings made in the configuration utility .
EN Chapter 2 Printing Tasks 59 Language Clic k the do wn arro w , then select the language (f or e xample; English, F rench, Ger man) that y ou want used in de vice generated repor ts, such as the configuration repor t and the demo page.
60 Chapter 2 Printing Tasks EN Printing b y Size of P aper Note F or printing by type of paper , see T ra y Lock. Y ou can configure the pr inter to select paper b y siz e (such as letter or A4), as opposed to source (a paper tra y).
EN Chapter 3 Printer Tips and Maintenance 61 3 Pr inter Tips and Maintenance Overview This chapter provides suggestions f or high-quality and economical printing.
62 Chapter 3 Printer Tips and Maintenance EN Managing the UltraPrecise T oner Car tridge HP P olicy on Non-HP T oner Car tridg es He wlett-P ackard Company cannot recommend use of non-HP toner car tr idges , either new , refilled, or remanuf actured. Because they are not HP products, HP cannot influence their design or control their quality .
EN Chapter 3 Printer Tips and Maintenance 63 Redistrib uting the T oner When toner is low , f aded or light areas ma y appear on a printed page. Y ou ma y be ab le to temporarily improv e print quality b y redistributing the toner . The f ollo wing procedure ma y allo w y ou to finish the current print job before replacing the toner car tr idge .
64 Chapter 3 Printer Tips and Maintenance EN 4 Reinser t the toner car tr idge into the printer and close the top cov er . If the print remains light, install a new toner car tr idge . (F ollo w the instructions provided with the ne w toner car tr idge .
EN Chapter 3 Printer Tips and Maintenance 65 Cleaning the Printer T o maintain print quality , follo w the cleaning procedure on the f ollo wing pages e v er y time the toner car tr idge is changed or whene v er print quality prob lems occur . As much as possib le , k eep the printer free from dust and debr is.
66 Chapter 3 Printer Tips and Maintenance EN Note F or best results , use a transparency during this process. If a transparency is not a v ailable, use copier g rade paper and not bond or rough paper . Note During the engine cleaning process, the printer pulls the transparency into the printer and then stops.
EN Chapter 3 Printer Tips and Maintenance 67 Internal Cleaning Pr ocedure Ov er time, par ticles of toner and paper will begin to accumulate inside the printer . This ma y cause pr int quality prob lems during pr inting. Cleaning the printer will eliminate or reduce these prob lems.
68 Chapter 3 Printer Tips and Maintenance EN.
EN Chapter 4 Problem Solving 69 4 Prob lem Solving Overview This chapter helps y ou troubleshoot printer prob lems in the f ollo wing areas: ! T roub leshooting Chec klist ! T roub leshooting General .
70 Chapter 4 Problem Solving EN T r oub leshooting Chec klist If the printer is not responding proper ly , complete the follo wing chec klist in order . If the pr inter does not pass a step , f ollow the corresponding troub leshooting suggestions . T roub leshooting Chec klist Make sure the printer Ready light is on.
EN Chapter 4 Problem Solving 71 Print a shor t document from a software application to v erify the computer and printer are connected and are communicating correctly . If the page does not print, check the cab le connection between the printer and computer .
72 Chapter 4 Problem Solving EN T r oub leshooting General Printing Pr ob lems T roubleshooting General Printing Pr oblems Symptom P ossible Cause Solution Printer selects media from the wrong tra y . The tra y selection in the software application ma y be incorrect.
EN Chapter 4 Problem Solving 73 Print job is extremely slo w . The job may be v er y complex. The maximum speed of 19 pages-per-minute (letter-siz e paper , or 18 ppm with A4-size paper) cannot be e xceeded e v en when more memor y is added. Printing speeds may be automatically reduced when printing special-sized media.
74 Chapter 4 Problem Solving EN The printer pr ints, b ut the text is wrong, garbled, or incomplete. The printer cable is loose or def ectiv e . Disconnect the printer cable and reconnect it. T r y a pr int job y ou know w orks. If possib le, attach the cabl e and printer to another computer and tr y a print job that you kno w works.
EN Chapter 4 Problem Solving 75 The printer does not respond when “ print ” is selected in the software (contin ued). The cab le between the computer and the printer is not connected properly . Disconnect and reconnect the cable . The printer cable is def ectiv e .
76 Chapter 4 Problem Solving EN The printer does not respond when “ print ” is selected in the software (contin ued). The printer is malfunctioning. Check the lights on the printer to deter mine if the printer is indicating an error . See T roubleshooting Control P anel Messages or use the control panel simulator .
EN Chapter 4 Problem Solving 77 Printing Special P ages There are special pages within the memor y of the pr inter that will help y ou to diagnose and lear n about prob lems with y our printer .
78 Chapter 4 Problem Solving EN Clearing P aper Jams Occasionally , paper can become jammed during a pr int job . Some of the causes include: ! P aper tra ys loaded improperly or ov erfilled. ! T ra y 2 or optional T ra y 3 is remo v ed during a pr int job .
EN Chapter 4 Problem Solving 79 T oner Car tridg e Area 1 Open the top cov er . CA UTION P aper jams in this area ma y result in loose toner on the page. If y ou get an y toner on y our clothes or hands, w ash them in cold water . (Hot water will set the toner into the f abric.
80 Chapter 4 Problem Solving EN Note If the paper is too difficult to remov e or has already entered the output area, remov e the jam as descr ibed in Output Areas. 4 When the jammed paper has been remov ed, gently flip down the registration plate . Replace the toner car tr idge and shut the top cov er .
EN Chapter 4 Problem Solving 81 T ra y 2 or Optional T ra y 3 P aper Feed Area Note If paper has entered the toner car tr idge area, f ollo w the instructions in T oner Car tr idge Area. It is easier to remo v e paper from the toner car tr idge area than the paper f eed area.
82 Chapter 4 Problem Solving EN Output Areas CA UTION P aper jams in this area ma y result in loose toner on the page. If y ou get an y toner on y our clothes or hands, w ash them in cold water . (Hot water will set the toner into the f abric.) 1 Open the top cov er and remov e the toner car tr idge .
EN Chapter 4 Problem Solving 83 Duple xer Area 1 Slide out T ra y 2 from the pr inter . 2 Pull the green le ver on the left front of the printer to open the bottom of the duple x er . 3 Reach in and pull out the jammed paper . 4 Push the bottom of the duple x er bac k up until it clic ks into place.
84 Chapter 4 Problem Solving EN Solving Print Quality Pr oblems Print Quality Chec klist General print quality prob lems can be solv ed b y f ollo wing the chec klist below . ! Chec k the pr inter driv er to mak e sure y ou are using the best a v ailab le print quality option (see Choosing Pr int Quality Settings).
EN Chapter 4 Problem Solving 85 Image Defect Examples The e xamples belo w depict letter-siz e paper that has passed through the printer shor t-edge first.
86 Chapter 4 Problem Solving EN Light Print or F ade If a v er tical white streak or f aded area appears on the page: ! The toner supply is low . Y ou ma y be ab le to temporarily e xtend the toner car tr idge lif e . See Redistributing the T oner. If this does not improv e the pr int quality , install a new HP toner car tr idge .
EN Chapter 4 Problem Solving 87 V er tical Lines If b lac k or white v er tical streaks appear on the page: ! The photosensitiv e drum inside the toner car tr idge has probab ly been scratched or is w or n out.
88 Chapter 4 Problem Solving EN V er tical Repetitive Defects If marks repeatedly appear on the pr inted side of the page at e v en inter v als: ! The toner car tr idge ma y be damaged. The circumference of the toner car tr idge drum is 94 mm (3.7 in.
EN Chapter 4 Problem Solving 89 Curl or W ave ! Chec k the paper type and quality . Both high temperature and humidity will cause paper curl. See Media Specifications. ! T ur n o v er the stac k of paper in the tra y . Also tr y rotating the paper 180 ° in the input tra y .
90 Chapter 4 Problem Solving EN Wireless Printing Pr ob lems Wireless Printing Pr oblems Symptom P ossible Cause Solution The connection cannot be estab lished or the transmission seems to be taking longer than usual. Computer is not IrD A- compliant.
EN Chapter 4 Problem Solving 91 The connection cannot be estab lished or the transmission seems to be taking longer than usual (continued). Bright lights are interfering with the signal. Mak e sure that no bright light is shining directly into either IR por t.
92 Chapter 4 Problem Solving EN T r oubleshooting Contr ol P anel Messages Printer status is indicated by light patter ns on the control panel. The lights can be in any one of the f ollowing states: See the f ollo wing inf ormation to inter pret control panel lights, or use the control panel simulator (see Control P anel Simulator).
EN Chapter 4 Problem Solving 93 Pr ocessing The printer is receiving or processing data when the Ready (green) light is b linking. Pressing J OB C ANCEL cancels the current job . One or two pages ma y print as the pr inter clears the print job . The printer will retur n to the ready state (Ready light on) after the job has been canceled.
94 Chapter 4 Problem Solving EN Attention with the Ability to Continue The Attention (red) light is b linking and the G O (g reen) light is on. An error has occurred that has caused the printer to halt the current pr int job .
EN Chapter 4 Problem Solving 95 Accessory Error All of the lights are b linking in unison. An error has occurred with either the EIO por t or the DIMM slots, that has caused the printer to halt the current print job . Pressing G O or J OB C ANCEL has no eff ect.
96 Chapter 4 Problem Solving EN Secondary Light P atterns Note Y ou can also use the control panel simulator to understand printer messages. Continuab le Attention Error s T ype of Error Light P attern Recommended Action Memor y Ov erflo w The printer memor y is full.
EN Chapter 4 Problem Solving 97 Bad Connection The cable betw een the printer and computer has a bad connection or the cable is of poor quality . Check the cab le connections to see if they are secure . Make sure y ou are using a high-quality cabl e. Memor y Configuration Error ! Reprint the job.
98 Chapter 4 Problem Solving EN P ersonality/Job Related Error ! T ur n the printer off . Press and hold the GO button. T ur n the printer on and continue to hold the GO b utton f or appro ximately fiv e seconds, b ut no longer than fifteen seconds. The Attention light will come on during this process.
EN Chapter 4 Problem Solving 99 NVRAM Error The nonv olatile memor y (NVRAM) is temporarily full. Press G O to clear the message. Chec k the printer settings to ensure they are correct. If the problem persists , contact your dealer or HP service representative.
100 Chapter 4 Problem Solving EN Accessory Error s T ype of Error Light P attern Recommended Action EIO P or t Error Remov e the accessory from the EIO P or t or DIMM Slot indicated by the error to continue printing. DIMM Slot 1 Error Remov e the accessory from the EIO P or t or DIMM Slot indicated by the error to continue printing.
EN Chapter 4 Problem Solving 101 Netw ork Printing Pr oblems Note It is recommended that y ou use the HP LaserJet 2200 CD to install and setup the printer on a networ k.
102 Chapter 4 Problem Solving EN Common Windo ws Pr oblems Common Windows Pr ob lems Symptom P ossible Cause Solution Error Message: “ Error Writing to LPTx ” in Windows 9x. Make sure that there is paper in the tra y . Make sure the cables are connected correctly , the pr inter is on, and the Ready light is on.
EN Chapter 4 Problem Solving 103 Error Message: “ General Protection F ault ” “ Exception OE ” “ Spool32 ” “ Illegal Operation ” (Continued) Delete all temp files from the T emp sub-director y . Y ou can deter mine the name of the director y b y editing the A UT OEXEC .
104 Chapter 4 Problem Solving EN Common Macintosh Pr ob lems Macintosh Pr oblems Symptom P ossible Cause Solution Pr oblems in the Chooser Printer dr iv er icon does not appear in the Chooser . Software not installed correctly . The LaserWr iter driver should be present as a par t of the Mac OS.
EN Chapter 4 Problem Solving 105 Mak e sure the printer has been chosen in the Chooser by printing a self-test. (Simultaneously press G O and J OB C ANCEL .) Chec k the AppleT alk name of the pr inter displa y ed on the self-test page. Mak e sure AppleT alk is on.
106 Chapter 4 Problem Solving EN An encapsulated P ostScr ipt (EPS) file does not print with the correct fo n t s. This prob lem occurs with some software applications. T r y downloading the f onts contained in the EPS file to the printer before printing.
EN Chapter 4 Problem Solving 107 The HP LaserJet USB printer does not appear in the Macintosh Chooser after the driver is selected. This problem is caused b y either a software or hardware component. Software tr oubleshooting ! Chec k that y our Macintosh suppor ts USB.
108 Chapter 4 Problem Solving EN Selecting an Alternate P ostScript Printer Description (PPD) 1. Open the Chooser from the Apple menu. 2. Clic k the LaserWr iter icon. 3. If y ou are on a network with multiple z ones, select the z one in the AppleT alk Zones bo x where the printer is located.
EN Chapter 4 Problem Solving 109 T r oub leshooting P ostScript (PS) Erro r s The f ollo wing situations are PS language specific and ma y occur when se v er al printer languages are being used.
110 Chapter 4 Problem Solving EN Specific Err ors Limit Check Error Pr int job too comple x. Y o u ma y need to pr int y our job at 600 dots per inch, reduce the comple xity of the page , or install more memor y . VM Error F ont Error Select unlimited do wnloadab le f onts from printer driver .
EN Chapter 5 Service and Support 111 5 Ser vice and Suppor t A v ailability HP provides a v ar iety of ser vice and suppor t options around the world. A vailability of these progr ams will v ar y depending upon y our location. HP Express Exch ang e 1.
112 Chapter 5 Service and Support EN Guidelines f o r Repacking the Printer ! Remov e and retain any DIMMs (dual in-line memor y modules) installed in the printer . ! Remov e and retain any cab les and optional accessories installed in the printer . CA UTION Static electricity can damage DIMMs.
EN Chapter 5 Service and Support 113 Service Info rmation Form WHO IS RETURNING THE EQUIPMENT? Date: P erson to contact: Phone: ( ) Alter nate contact: Phone: ( ) Retur n shipping address: Special shipping instructions: WHA T IS BEING SENT? Model name: Model number: Serial number : Please attach any rele v ant printouts when returning equipment.
114 Chapter 5 Service and Support EN HP Maintenance Agreements HP has se v eral types of maintenance agreements that meet a wide range of suppor t needs. Maintenance ag reements are not par t of the standard warr anty . Suppor t ser vices v ar y b y area.
EN Chapter 5 Service and Support 115 He wlett-P ac kar d Limited W arranty Statement 1. HP warr ants to y ou, the end-user customer , that HP hardware , accessories, and supplies, will be free from def ects in mater ials and workmanship after the date of purchase, f or the period specified abov e.
116 Chapter 5 Service and Support EN 7. T O THE EXTENT ALLOWED BY LOCAL LA W , THE REMEDIES IN THIS W ARRANTY ST A TEMENT ARE Y OUR SOLE AND EXCLUSIVE REMEDIES.
EN Chapter 5 Service and Support 117 Limited W arranty f or T oner Car tridg e Life Note The warr anty below applies to the toner car tr idge that came with this printer .
118 Chapter 5 Service and Support EN W orld wide Sales and Service Offices Note Bef ore calling an HP Sales and Ser vice office , be sure to contact the appropriate HP Customer Care (Ser vice and Suppor t) Center. Products should not be retur ned to these offices.
EN Chapter 5 Service and Support 119 Colombia Hewlett-P ackard Colombia Calle 100 No . 8A -55 T orre C Oficina 309 Bogot á , Colombia Cr oatia Hewlett-P ackard T rading S.A. Cibona Business T ow er TRG Draz ena P etrovica 3/13 10000 Zagreb Phone: (385) (1) 488-1000 F ax: (385) (1) 488801010 Czech Repub lic Hewlett-P ackard s .
120 Chapter 5 Service and Support EN Israel Hewlett-P ackard Isr ael 11Hashlosha St. T el-A viv 67060 Phone: 972 3 5380300 F ax: 972 3 5380351 Ital y Hewlett-P ackard Italiana SpA Via Giuseppe di Vittorio , 9 I-20063 Cer nusco Sul Na viglio (Milano) Phone:(39) (2) 921-21 F ax:(39) (2) 921-04473 Japan Hewlett-P ackard J apan, Ltd.
EN Chapter 5 Service and Support 121 Ne w Zealand Hewlett-P ackard (NZ) Limited P or ts of Auc kland Building Princes Wharf, Qua y Street P .O . Bo x 3860 Au ck l a n d Phone:(64) (9) 356-6640 F ax:(6.
122 Chapter 5 Service and Support EN Switzerland Hewlett-P ackard (Schweiz) A G In der Luberzen 29 CH-8902 Urdorf/Z ü ric h Phone:(41) (0848) 88 44 66 F ax:(41) (1) 735-77 0 W arranty Support: (41) (0848) 80 11 11 Ta i w a n Hewlett-P ackard T aiwan Ltd.
EN Appendix A Specifications 123 A Specifications Printer Specifications HP LaserJet 2200 HP LaserJet 2200 with Optional T ray 3 (250-sheet) HP LaserJet 2200 with Optional T ray 3 (500-sheet) Height 255 mm (10.0 in.) 334 mm (13.2 in.) 395mm (15.6 in.) Width 405 mm (16.
124 Appendix A Specifications EN WA R N I N G ! P o wer requirements are based on the region where the pr inter is sold. Do not con v er t operating v oltages . This ma y damage the printer and v oid the product wa rranty . En vironmental Specifications Operating Printing Storage/Standb y T emperature (printer and toner car tridge) 15 ° to 32.
EN Appendix A Specifications 125 FCC Regulations This equipment has been tested and f ound to comply with the limits f or a Class B digital de vice, pursuant to P ar t 15 of the FCC r ules . These limits are designed to provide reasonab le protection against har mful interf erence in a residential installation.
126 Appendix A Specifications EN En vir onmental Pr oduct Ste war dship Pr ogram Pr otecting the En vir onment He wlett-P ac kard Compan y is committed to pro viding quality products in an en vironmentally sound manner . This product has been designed with se v er al attributes to minimiz e impacts on our environment.
EN Appendix A Specifications 127 Plastics Plastic par ts ov er 25 g rams are marked according to international standards that enhance the ability to identify plastics f or recycling pur poses at the end of the product ’ s lif e .
128 Appendix A Specifications EN U. S . R e t u r n s F or a more en vironmentally responsib le retur n of used car tr idges and consumab les, HP encour ages the use of b ulk retur ns. Simply b undle two or more car tridges together and use the single, pre-paid, pre- addressed UPS label that is supplied in the pac kage.
EN Appendix A Specifications 129 Regulatory Statements Dec laration of Conf ormity according to ISO/IEC Guide 22 and EN 45014 Manufacturer's Name: Hewlett-P ackard Compan y Manufacturer's Ad.
130 Appendix A Specifications EN Laser Safety Statement The Center f or De vices and Radiological Health (CDRH) of the U .S . F ood and Drug Administration has implemented regulations f or laser products manuf actured since August 1, 1976. Compliance is mandator y f or products marketed in the United States .
EN Appendix A Specifications 131 VCCI Statement (Japan) K orean EMI Statement.
132 Appendix A Specifications EN Laser Statement f or Finland LASER TUR V ALLISUUS LUOKAN 1 LASERLAITE KLASS 1 LASER APP ARA T HP LaserJet 2200 -laserkirjoitin on k ä ytt ä j ä n kannalta tur vallinen luokan 1 laserlaite. Nor maalissa k ä yt ö ss ä kirjoittimen suojakotelointi est ää lasers ä teen p ää syn laitteen ulk opuolelle .
EN Appendix B Media Specifications 133 B Media Specifications Overview This printer accepts a variety of media, such as cut-sheet paper (including up to 100% recycled fiber content paper), en v elopes , labels, tr ansparencies , and custom-size paper .
134 Appendix B Media Specifications EN Suppor ted Siz es of P aper Note Y ou ma y e xper ience some paper jams when using any media with a length less than 178 mm (7 in.). This ma y be caused by paper that has been aff ected b y en vironmental conditions .
EN Appendix B Media Specifications 135 Tr a y 2 o r Tr a y 3 (250-sheet tra y) Dimensions a We i g h t Capacity b Letter 216 b y 279 mm (8.5 b y 11 in.) 60 to 105 g/m 2 (16 to 28 lb) 250 sheets of 80 g/m 2 (20 lb) paper A4 210 by 297 mm (8.3 b y 11.7 in.
136 Appendix B Media Specifications EN A utomatic Duple xer Dimensions a We i g h t Letter 216 b y 279 mm (8.5 by 11 in.) 60 to 105 g/m 2 (16 to 28 lb Bond) A4 210 b y 297 mm (8.3 by 11.7 in.) Legal 216 b y 356 mm (8.5 by 14 in.) 8.5 x 13 in. 216 b y 330 mm (8.
EN Appendix B Media Specifications 137 Guidelines f o r Using P aper F or best results , mak e sure the paper is of good quality , and free of cuts, nic ks , tears , spots, loose par ticles, dust, wrinkles, v oids, and curled or bent edges.
138 Appendix B Media Specifications EN Note Do not use letterhead paper that is printed with low-temperature inks , such as those used in some types of ther mogr aph y . Do not use raised or embossed letterhead. The printer uses heat and pressure to fuse toner to the paper .
EN Appendix B Media Specifications 139 Printing and P aper Storage En vir onment Ideally , the printing and paper storage en vironment should be at or near room temperature , and not too dr y or too humid. Remember paper is h yg roscopic; it absorbs and loses moisture rapidly .
140 Appendix B Media Specifications EN En velopes En v elope construction is cr itical. En v elope f old lines can v ar y considerab ly , not only between manuf acturers, but also within a bo x from the same manuf acturer . Successful pr inting on en v elopes depends upon the quality of the en v elopes .
EN Appendix B Media Specifications 141 En velopes with Double Side Seams Doub le side-seam constr uction has v er tical seams at both ends of the en velope r ather than diagonal seams. This style ma y be more likely to wrinkle. Be sure the seam e xtends all the w a y to the cor ner of the en v elope as illustrated belo w .
142 Appendix B Media Specifications EN En velope Margins The f ollo wing giv es typical address margins f or a commercial #10 or DL en v elope . Note F or the best print quality , position margins no closer than 15 mm (0.6 in.) from the edges of the en v elope.
EN Appendix B Media Specifications 143 Labels CA UTION T o a void damaging the printer , use only labels recommended f or laser printers T o pre v ent serious jams, alw a ys use T ra y 1 to print labels and alwa ys use the rear output bin. Ne v er print on the same sheet of labels more than once or pr int on a par tial sheet of labels.
144 Appendix B Media Specifications EN T ransparencies T ransparencies used in the printer must be ab le to withstand 200 ° C (392 ° F), the pr inter ’ s fusing temperature. CA UTION T o a v oid damaging the printer , use only transparencies recommended f or use in HP LaserJet printers, such as HP-br and transparencies .
EN Appendix C Printer Memory and Expansion 145 C Pr inter Memor y and Expansion Overview ! Printer Memor y ! Installing Memor y ! Chec king Memor y Installation ! Installing an HP JetDirect EIO Card.
146 Appendix C Printer Memory and Expansion EN Printer Memory The printer has two dual in-line memor y module (DIMM) slots f or upgr ading with: ! More printer memor y . DIMMs are a v ailab le in 4, 8, 16, and 32 MB f or a maxim um of 72 MB. ! DIMM-based accessor y f onts , macros, and patterns.
EN Appendix C Printer Memory and Expansion 147 Installing Memory CA UTION Static electricity can damage dual in-line memor y modules (DIMMs). When handling DIMMs, either w ear an antistatic wrist strap or frequently touch the surf ace of the DIMMs ’ antistatic pac kage, then touch bare metal on the printer .
148 Appendix C Printer Memory and Expansion EN 6 Remov e the DIMM from the antistatic pac kage. 7 Holding the DIMM b y the edges (as shown in the illustr ation), align the notches on the DIMM with the DIMM slot. (Chec k that the loc ks on each side of the DIMM slot are open.
EN Appendix C Printer Memory and Expansion 149 Chec king Memor y Installation T o v erify that DIMMs are installed correctly: 1. T ur n the printer on. Check that the printer control panel displa ys the Ready light after the printer has gone through the star tup sequence.
150 Appendix C Printer Memory and Expansion EN Installing an HP JetDirect EIO Card 1 T ur n the printer off , and disconnect the pow er cord. 2 Open the interf ace cab le door b y pressing on the release tabs and s winging the door outw ard. Disconnect all interf ace cab les .
EN Appendix D Printer Commands 151 D Pr inter Commands Overview Most software applications do not require y ou to enter pr inter commands. See y our computer and software documentation to find the method f or entering pr inter commands, if needed. PCL PCL printer commands tell the pr inter which tasks to perf or m or which f onts to use .
152 Appendix D Printer Commands EN PJL HP's Printer Job Language (PJL) provides control abo v e PCL and other printer languages. The f our major functions pro vided b y PJL are: ! printer languag.
EN Appendix D Printer Commands 153 Under standing PCL Printer Command Syntax Bef ore using printer commands, compare these characters: Many printer commands use the low ercase letter l ( l ) and the number one (1), or the uppercase letter O ( O ) and the number z ero ( 0 ).
154 Appendix D Printer Commands EN Combining Escape Sequences Escape sequences ma y be combined into one escape sequence string. There are three impor tant r ules to f ollow when combining code: 1. F or each escape sequence , the first two char acters after the ? character m ust be the same.
EN Appendix D Printer Commands 155 Selecting PCL Fonts PCL printer commands for selecting f onts can be f ound on the PCL F ont List which can be printed from the HP LaserJet De vice Configuration (Windo ws) or the HP LaserJet utility (Macintosh). A sample section is shown belo w .
156 Appendix D Printer Commands EN P age Control Commands P aper Source ? & l #H 0 = prints or ejects current page 1 = T ra y 2 2 = manual f e ed, paper 3 = manual f e ed, en v elope 4 = T ra y 1 5 = T ra y 3 7 = auto select P aper Siz e ? & l #A 1 = Executiv e 2 = Letter 3 = Legal 4 = A5 5 = A4 6 = B5-JIS 8 = 8.
EN Appendix D Printer Commands 157 V er tical Motion Index ? & l #C 1/48-inch increments (compresses print v er tically) Line Spacing ? & l #D # = lines per inch (1, 2, 3, 4, 5, 6, 12, 16, 24,.
158 Appendix D Printer Commands EN Language Selection Enter PCL Mode ? %#A 0 = Use previous PCL cursor position 1 = Use current HP-GL/2 pen position Enter HP-GL/2 Mode ? %#B 0 = Use pre vious HP-GL/2 .
EN Appendix D Printer Commands 159 Primar y Stroke Wt. ? (s#B 0 = medium (book or text) 1 = semi bold 3 = bold 4 = e xtra bold Ty p e f a c e a ? (s#T Print a PCL font list to vie w the command f or each inter nal f ont. a. The preferred method is to use the primary pitch command.
160 Appendix D Printer Commands EN.
EN Index 161 Inde x Numerics 2-sided printing (duplexing) 46 3x5 cards printing 45 A accessing the printer driver 52 accessories 27 ordering 27 – 29 acoustic emissions 124 additional drivers, obtain.
162 Index EN L label orientation 43 labels specifications 143 language switching 4 languages switching 12 Laser Writer driver 16 LaserJet Utility 16 latest drivers, obtaining 5 letterhead printing on .
EN Index 163 R redistributing toner 63 renaming the printer 108 repacking the printer 112 S sales and service offices 118 selecting alternate PPD 108 self-test page, see configuration page 77 service .
.
.
6-1/2” x 9" FRONT COVER 6-1/2" x 9" BACK COVER copyright © 2001 Hewlett-Packard Company www .hp.com/support/lj2200 english hp LaserJet 2200 hp color LaserJet xxxx 3/8” x 9" SP.
Ein wichtiger Punkt beim Kauf des Geräts HP LaserJet 2200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP LaserJet 2200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP LaserJet 2200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP LaserJet 2200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP LaserJet 2200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP LaserJet 2200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP LaserJet 2200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP LaserJet 2200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP LaserJet 2200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
