Benutzeranleitung / Produktwartung CM4730 des Produzenten HP
Zur Seite of 116
HP C olor L a se rJet CM4 7 30 MFP Embedded W eb Se r v er U ser Gui de.
.
HP Embedded Web Server User Guide.
Copyright and Warra nty © 2007 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation or translation without prior written per mission is prohibited, except as allowed under the copyright laws. The information contained her ein is subject to change without notice.
Table of contents 1 Overview What is an embedded Web server? . .............. .............. .............. ................. .............. .............. ...... .... .. 1 Features .................. ....................... ...................... ...
Kerberos Authentication Tasks ............ .................. .................. ................. ................. ........ 47 Initializ ing Kerbero s authentic ation ................................................................... 48 Con figu re th e Au then tica tion M ana ger f or Ke rber os Au then tica tion .
Overvie w ............... .................. ................ .................. ................... ................... ............. ............. ......... 98 6 Using th e Other Links as a reso urce hp instant support ............ .................
List of tables Table 1-1 HP Embedd ed Web Server ................. .................... ..................... .................... ................ ............... ... 5 Table 2-1 Device Status ........ .................. .................. ..........
List of figures Figure 1 -1 Enter Networ k Passwor d dialog box . ............. .............. .............. ................. .............. ......... ....... ........ 4 Figure 1-2 Sample HP EWS screen ............ ..................... ............
Figure 4-5 E-mail Addre ss Book screen .......................... .......................... ......................... ............ .................. 76 Figure 4-6 Fax S ettings scr een ...... ............... ............... ................ ........
1O v e r v i e w What is an embedded Web server? A Web server provides an en vironment in which Web programs can ru n, in much the same way that an operating system, such as Microsoft® Win dows®, pr ovides an environment in which programs can run on your computer.
● Receive alerts about product even ts, such as when the product is low on supplies, thro ugh e-mail. Set up four different destinati on lists for each user (administrators and service), with up to 20 recipients on each of th e four lists. ● Select the languag e in which to display the HP EWS screens.
NOTE You cannot view the HP EWS scre ens from outside of a firewall. 1. Open a suppor ted Web browser. 2. In the Address or Go to field, type the IPv4 or IPv6 TCP /IP address, the host name, or the configured host n ame that is assigned to the product.
Login and logoff The HP EWS has scree ns that can be used to view product information and change configur ation options. The screen s that appear, and the settings on th em, vary according to how you gain access to the HP EWS: as a general user, an information tec hnolo gy (IT) administrator, or a service provider.
CAUTION If you do not clos e the browser, the connection to the pro duct HP EWS continues to run and could pose security risks. Navigating through the HP Embedded Web Server To navigate through the HP.
Callou t HP EWS screen feature Description More information 2 Tabs Information tab View information about the product. You cannot configure the product using the screens on this tab. See Viewing product status from the HP EWS Information screens . Settings tab Use the features on this tab to configure the product.
2 Viewing product status from the HP EWS Information screens The screens availab le from the Information tab are for informational purposes o nly; you cannot configure the product from these screens. To co nfigure the product through the HP EWS, see Configuring the product fro m the Settings screens .
Device Status Use the Device Status screen to view the current status of the product. The following illustration and table describe how to use this screen.
Callout Area on the scre en Information or capability that the area provides 6 Media Shows the status and configuration informat ion for the input trays and output bins. The media status is OK until the tray is completely empty. When the tray is empty, the status is Out .
Configuration Page Use the Configuratio n Page screen to view current product setting s, help troubleshoot problems, and verify the installatio n of optional accessories such as dual inline memo ry modules (DIMMs). The following illustration and table de scribe how to use this screen.
Figure 2 -3 Configuration Page screen – 2 of 2 Table 2-2 Conf iguration Page Callout Area on the screen Information or capability that the area provides 1 HP EWS tabs and menus For more information, see Navig ating through the HP Embedded Web Server .
Callou t Area on th e screen Information or capability that the area provides 4 Memory Lists the memory information, PCL Driver Work Space (D WS), and resource saving informatio n. 5 Securit y Lists the status of the control-panel lock, disk write-protect options, and direct-connect (USB or parallel) po rts.
Supplies Status The Supplie s Status screen shows more detailed supplies information and provides part numbers for genuine HP supp lies. (It is helpful to have the pa rt numbers available when ordering supplies.) Th e following illustration and table de scribe how to use this screen.
Table 2- 3 Supplies Status Callou t Area on th e screen Information or capability that the area provides 1 HP EWS tabs and menus For more information, see Navigating through the H P Embedded Web Server . 2 Shop for Supplies link Use this feature to connect to a Web page that facilitates online orderin g of supplies from a reseller of your choice.
Event Log The Event Log screen shows the most recent produ ct events , including jams, service errors, and other printer errors. The following illustration an d table describe how to use this screen.
Usage Page The Usage Page screen gives a page count for each size of me dia that has passed through the produ ct, as well as the number of duplexed p ages. The total is calculated by multiplying the sum of th e print count values by the Units value. The information on this screen can be used to determine how much toner or paper to keep on hand.
Figure 2 -7 Usage Pag e screen – 2 of 2 Table 2-5 Usage Pag e Callout Area on the screen Information or capability that the area provides 1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web Server .
Diagnostics Page The Diagnostics Page screen provid es information ab out calibration, colo r density, and parameters. Figure 2-8 Diagnostics Page scr een Table 2- 6 Diag nostics Page Callou t Area on.
Callout Area on the screen Information or capability that the area provides Color plane registration occurs when new print cartridges are installed to compensate for any slight variations that might occur in cartridge circumference.
Device Information The Device Information screen shows the following info rmation: ● Device name ● Device location ● Asset number ● Company name ● Contact person ● Product name ● Device model ● Device serial number The product name, device m odel, and device seri al number are ge nerated automatically.
Control Panel Snapshot The Control Pane l Snapshot screen shows the product control-panel display as if you were standing at the product. Because thi s view shows the produc t status, it can help y ou troubleshoot pr oblems with the product. NOTE The appearance of the screen might vary, depending on your produ ct.
Color Usage Job Log Use the Color Usage Jo b Log to vi ew usage details for the printer. The following illustration and table describe how to us e the Color Usage Job Log screen.
Print NOTE The Print screen (and the Print menu on the left) is available only if it has been configured to appear on th e Secur ity screen under th e Settings tab. Use the Security screen to disable the Print screen if you do not want it to appear for security reasons.
Callou t Area on screen Information or capability that the area provides 2 Device Status Shows the device status (the same information that appears on the Device Status screen and the control-panel display). 3 Choose File Prints a print-ready file, such as a .
3 Configuring the product from the Settings screens Use the screens on the Settings tab to configure the prod uct from your com puter. Configure Device You can use the Configure Device screen to print device informa ti on pages and configure the device remotely.
Table 3- 1 Configure Device Callou t Area on th e screen Information or capability that the area provides 1 HP EWS tabs and menus For more information, see Naviga t ing through the HP Embedded Web Server . 2 Select A Menu Information menu Print device information pages, which provide details about the device and its configuration.
Tray Sizes/Types Use the Tray Sizes/Types screen to assign paper sizes and paper types for each tray on the product. The following ill ustration and table describe how to use this screen.
E-mail Server Use the E-mail Server screen to configure e-mail settings for outgoing e-mail. Use the settin gs on this screen to send and re ceive e-mail messages, including product alerts. The fo llowing illustration, table, and procedures describe how to use this screen.
Configuring outgoing e-mail You must configure ou tgoing e-mail if you intend to use the Alerts or AutoSend features. 1. Gather the following information. (Yo ur organiza tion's network or e-mail administrator typically provides the information th at is re quired to configure outg oing mail.
Alerts From the Alert s screen, IT administrators can set up the pr o duct to send problem and status alerts to anyone through e- mail messages. When this function is configured, alerts are automatical ly triggered about supplies, pap er-path status, and other service an d advisory information.
Table 3-4 Alerts Callout Area on the screen Information or capability t hat the area provides 1 HP EWS tabs and menus For more informa t ion , see Navigating through the HP Embedded Web Ser ver . 2 Destination lis t summary Lists the curren t selecti ons for each destination.
Using the Alerts screen with a product You can set up four different lists, with up to 20 recipients on each list. The Alerts - setup screen that appears when you cli ck either Edit or New Destination List looks similar to the following illustration.
Figure 3 -5 Alerts - setup screen ENWW Alerts 33 Settings.
To configur e alerts 1. Do one of the fo llowing: ● To create a new d estination list, click New Destination List . -Or- ● To modify an exi sting destination list, click Edit next to the list that you want to modify. The Alerts - setup screen appears.
one for the Event Lo g in HTML, and a third consisting o f instant support information i n a text file attachment that ha s an .XML extension. 8. Click Apply to save the information. 9. Repeat st eps 1 through 7 for each add i t ional list or destination.
3. The return address is the product's e-m ail address . Type your e-mail address in the Return Address box if you would like to receive messages ab out any errors that are ge nerated from the test alert (for example, to be notifi ed of an incorrect destination address).
Table 3-5 AutoSend Callout Area on the screen Information or capability that the area provides 1 HP EWS tabs and menus For more information, see Navigating through the HP Embedd ed Web Server . 2 Enable AutoSend Select this check box to turn on the AutoSend feature.
Security The following i llustration and table describe how to use the Security screen. Figure 3-8 Security screen Table 3- 6 Security Callou t Area on the screen Information or capability that the area provides 1 HP EWS tabs and menus For more information, see Navigating thr ough the HP Embedded Web Server .
Callout Area on the screen Information or capability that the area provides NOTE The Cancel Job button does not cancel the print job when the device is printing internal pages. 5 Direct Ports Select Disable Direct Ports to block walk-up printing and system access.
Authentication Manager Use the Authentication Manager screen to set the Device Function s that require users to successfully log in before use. The following illustrati on and table describe how to use this screen.
Callout Area on the screen Information or capability that the area provides ● Digital Sending Service (DSS) Se condary E-mail ● Digital Sending Service (DSS) Workflow 4 Future Installations Specify a log-in method for users gaining access to any new features to be installed in the future.
LDAP Authentication Use the LDAP Authentication pa ge to configure a Lightweight Di rectory Access Protocol (LDAP) server to authenticate d evice users.
Callout Area on the screen Information or capability that the area provides 2 LDAP Server Bind Method The LDAP Server Bind Method setting determines how the device will access the LDAP server. Contact your LDAP server administrator to determine which method will wo rk best for y ou.
Callou t Area on the s creen Information or capability that the area provides 8 Match the name entered with the LDAP attribute of When searching for the device user's informa tion in the LDAP database, the contents of the attribute specified in this field ar e compared to the username that was typed during authentication.
Kerberos Authentication Use the Kerberos Authentication page to configure the devi ce (multi-function peri pheral or d igital sender) to authenticate users to a Kerberos Real m.
Table 3- 9 Kerberos Au thentication Callou t Area on the s creen Information or capability that the area provides 1 HP EWS tabs and menus For more information, see Naviga t ing through the HP Embedded Web Server . 2 Kerberos Default Realm The Kerberos D efault Realm is the fully qualif ied domain name of the Kerberos realm (domain).
Callout Area on the screen Information or capability that the area provides 6 Credentials The Credentials configuration section is used to determine which credentials will be used to bind (authenticate) to the LDAP server.
Before following th e steps outlined here, you must have comple ted the following steps: 1. Install the Microsoft LD P tool. 2. Discover the LDAP serve r. 3. Set up LDP. After you have performe d these steps, perf orm the steps in the following section, Initializing Kerberos authentication .
c. Find the device user e- mail address in the LDP trace. Copy the at tribute defining the e-mail address, and paste it into the Retrieve the de vice user’s e-mail address using attribute of field. Some Kerberos environ ments require very specif ic attributes.
3. Under the Acces sing to LDAP Server section, perform the f ollowing steps: a. Select Kerberos fr om the LDAP Server Bind Method drop-down menu. NOTE The LDAP Ser ver Bind Methods on the Addressing Settings an d Kerberos Authentication screen s must match for Kerberos au thentication to work properly.
Device PIN Authentication If PIN Authentication is selected for one or more Device Functions on the Authentication Manager page, the user will be prompted fo r a PIN before th ey can access those Device Functions. If the PIN is entered incorrectly the user will be returned to the previous screen.
User PIN Authentication The User PIN Authentication page enables you to add user PIN records into th e device one at a time, and to edit or delete user PIN records that have already be en saved in the device. You can also use the device Import/Export feature to load a large list of users all at once, rather than adding them one at a time.
Figure 3 -13 User PIN Authentication screen Add New Users You can add a new user and PIN by clicking Add Ne w User.... This takes you to the Add User page, which has instructi ons for completing the task. Adding a ne w user To add a new user and PIN, do the following: 1.
4. Type the user PIN into the User Access PIN fi eld. It must be between 4 a nd 8 digits long. 5. If you want to add the new user's e-mail addre ss to the device address book, select the Add user to e-mail address bo ok automatically check box. 6.
Edit Other Links Use the Edit Other Links screen to add or customize up to five links to the Web sites of your choice (see the following no te). These links ap pea r throughout the HP EWS screens in the Other Links box beneath the left n avigational bar.
Callou t Area on the s creen Information or capability that the area provides 4 Other Links hp instant support Connect to Web resources that help you to solve specific problems and determine what additional services are available for your product.
Device Information Use the Device Inform ation screen to provid e a name of your choice for th e device, assign an asset number, and con figure the company name, the perso n to contact about the device, a nd the physical location of the device. Th e device name, device model , and serial number are also availa ble on this screen.
Language Use the Language screen to select the language in wh ich the HP EWS screens appear. The following illustration and table describe how to use this screen. Figure 3-16 Languag e screen CAUTION Selecting View Pages in Device Language or Select A La nguage changes the language for everyon e who uses the HP EWS.
NOTE The default langua ge is the language that th e Web browser is currently using. If your browser and control panel both use a language that is not available for the HP EWS, English is selected as the defa ult. If you make any changes on the La nguage screen, click Apply to save your changes.
Date & Time Use the Date & Time screen to update the prod uct time. The following illust ration and table describe how to use this screen. Figure 3-17 Date & Time screen Table 3- 12 Date &.
Date/Time Format Use the Date/Time Format screen to select the formats you prefer for displaying the date (under Date Format ) and time (under Time Format ).
Figure 3-19 Date & Time - clock drift correction screen To configure a net work time server to correct t he product clock drift, us e the following pr ocedure. NOTE This process keeps th e cloc k from drifting (losing or gaining time), but do es not synchronize the clo ck with th e network time server clock.
Wake Time An IT administrator can use the Wake Time screen to schedule product wakeups on a daily basis. For example, the pro duct can be set to wake up at 07:30, so the product has finished initializin g and calibrating and is ready t o use by 08:00.
Restrict Color Use the Restrict Color screen to restrict color printing. You can restrict color printing for all users or for specific users or specif ic applications.
Table 3-14 Restrict Color Callout Area on the screen Information or capab ility that the area provides 1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web Server . 2 Color Copying Access Select this option to cause the Restrict Color menu to become acce ssible from the product control panel.
Figure 3-22 Restrict Color screen - COLOR IF ALLOWED option Table 3- 15 Restrict Color – COLOR IF ALLOWE D Callou t Area on the s creen Information or capability that the area provides 1 COLOR IF ALLOWED Select this option to enable the User Permission and Ap plication Permission features.
Callout Area on the screen Information or capability that the area provides 5 User Permission List Select names from this list, then use the command buttons to Add, Edit, Delete, Save, or Cancel permissions for e ach user. 6 Color Usage Job Log Click this link for a list of System User Names that ha ve printed to the product.
4 Setting the digital sending options Administrators can use the screens avail able from the Digital Se nding tab to control the digital-sending features that some pro ducts offer. NOTE Some products do no t supp ort all of these screens. General Settings Use the General Settings screen to set digital-sen ding administrator information.
Callout Area on the screen Information or capability that the area provides 4 Phone Number (optional) Type the administrator's phone number (op t ional) . 5 Location (optional) Type the administrator's location (optional). 6 Help Click to o pen a help file that contai ns information about the screens on the Digital Sending tab.
Send to Folder Use the Send to Folder screen to send scanned docu ments to shared folders or FTP sites. NOTE The shared folders or F TP sites must be operational before using this tool to add them as destinations. The following i llustration and table describe how to use the Send to Folder screen.
Callout Area on the scre en Information or capability that the area provides 8 Test Folder Ac cess C lick Test Folder Access to test that a predefined folder is accessible by the device. 9 WINS Server Use the WINS Server setting to specify either the ho st name or IP address of the WINS server.
Removing a predefined folder Follow these steps to remove a predefined folde r from the device: 1. Select a folder from the Prede fine d Folders list by clicking on it. 2. Click Remove... and click OK to confirm. The sele cted folde r destination will be removed from the device.
E-mail Settings The product requires a Simple Ma il Transfer Protocol (SMTP) ga teway server to forward e-mail messages to a destination. If the SMTP gateway is not resp onding or has not been configured , the following messag e appears on the screen: 0.
Callou t Area on th e screen Information or capability that the area provides IP address or the host name of the SMTP Gateway, click the Find G ateways button to search the network for a suitable SMTP Gateway server. NOTE Some devices recognize only TCP/IP addresses.
Advanced E-mail Settings The following ill ustration and table describe how to use the Advance d E-Mail Settings screen. Figure 4 -4 Advanc ed E-mail Settings screen Table 4-4 Advanced E-mail Settings.
E-mail Address Book An e-mail address book is a list of e-mail addresse s that are stored on the device. The address bo ok can store frequently-u sed e-mail addresses so that you can qui ckly choo se the right e-mail address when sending a d ocument from the front panel of the device.
Adding an e-ma il address To add a new e-mai l address, do the following: 1. Click Add E-mail Address.... The Add E-mail Address page appears. 2. Type the person's na me in the Name field. The name i s what appears in the list o n the device control panel when a use r is searching for an e-mail address.
Fax Settings The product can send scan ned documents to a fax nu mber to simulate the se nding capabilities of a fax machine. If the produ ct is equipped with a fa x modem, it can also be set up to process incoming faxes.
Callout Area on the screen Information or capability that the area provides 3 Send Faxes directly from the device's internal modem Send faxes directly from the device.
Advanced Fax Settings The following i llustration and table describe how to use the Advance d Fax Settings screen. Figure 4-7 Advanced Fa x Settings screen Table 4- 6 Advanced Fax Settings Callou t Ar.
Callout Area on the screen In formation or capability that the area provide s 2 Help Click to open a help file that contains information about the screens on the Digit al Sending tab. 3 General Select the general settings, such as modem and ringer volume and whether to turn JBIG compression and Error Correction on or off.
In the Print T30 Reports field , you can set the frequency with wh ich T30 reports are p rinted. T30 reports are detailed reports ab out the fax communication that occurs du ring the most recent fax transaction.
Fax Address Book A fax address book is a list of fax n umbers that are stored on the device . Th e address book can store frequently-used fax numbers so th at you can quick ly choose the right destination when faxin g a document from the front panel of the MFP de vice.
Adding a fax number To add a new fax number, do the following: 1. Click Add Fax Number.... The Ad d Fax Number page appears. 2. Type the pe rson's name in the Name field. The name is what appe ars in the list on the d evice control panel when a user is searching for a fax num ber.
Import/Export Use this page to impor t and export address book an d user information to and from the device. When you import data to the device, you add new e- mail addresses, fax numbers, or user records, so that they can be acce ssed on this device.
programs or de vices. This file ca n be created using ei ther a spreadsheet prog ram such as Microsoft Excel, or a text program such as Microsoft Notepad.
When the import pro cess is complete, a message appears i ndicating how many records were successfully importe d and whether there were any import errors.
6. Click Finish to finish the wizard and export the file. 7. To import the .CSV file into the device, follow Steps 4 an d 5 of the Import an addr ess book instructions. Export an address book You can also export the address book or user inform atio n that has been saved in the device.
Addressing Settings NOTE The LDAP protoco l is typically only used in corporate e- mail environments. If you a re using an ISP for e-mail services , HP recommends that you use the E-mail Address Book function. In order for the product to send scanned documents , you must provid e one or more destination address.
Callou t Area on the screen Information or capability that the area provides 2 Help Click to open a help file that contains information about the scr eens on the Digital Sending tab. 3 Allow Device to directly access an LDAP Address Book Select this check box to provide the device direct access to an LDAP Address Book.
Callout Area on the scre en Information or capability that the area provides o=hp.com ou=engineering,cn=users,dc=hp,dc=com NOTE For some LDAP servers, the search root can be left blank (in which case its root node will be assumed). 12 Device user information retrieval method Exchange 5.
Advanced Addressing Settings The following i llustration and table describe how to use the Advance d Addressing Settings screen. Figure 4-13 Advan ced Addressing Settings screen Table 4- 8 Advanced Ad.
Log Use the Log screen to view digital se nding job information, including any errors that o ccur. The following illustration and table describe how to use this screen. NOTE If the HP DSS has be en installed, digital-sending activitie s are logged in the HP DSS instead of in t he HP EWS.
Callou t Area on the sc reen Information or capability that the area provides 10 Refresh Click this button to update the view to in clude the latest log information. 11 Clear Click this button to clear the information from the log . NOTE Clicking the Clear button merely clears the log that appears onscreen.
Figure 4 -16 Troubl eshoot screen Preferences Use the Preferences Settings screen to configure general settings for the digital-sen ding features. The following illustration and table de scribe how to use this screen.
Table 4- 10 Preferences Settings Callou t Area on scree n Information or capability that the area provid es 1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web Server . 2 Help Click to open a help file that contains information about the screens on the Digital Sendin g tab.
Using the HP DSS software The HP Color LaserJ et CM4730 MFP includes the Digit al Sending Software (HP DSS) which can be used to carry out its digital-sending tasks. If the HP DSS has been installed, all HP EWS Di gital Sending screens are available for read-only access.
5 Managing network operation from the Networking screens Overview Use the Networking screens to configu re and manage your produ ct on your network. The appearance and features of the scre ens available from the Netw orking tab differ, depending on the model and version of your HP Jetdirec t print server.
Callout Area on screen Information or capability that the area provides 2 Select Language Select the language for the Networking tab. The list of languages that are available in the Networki ng tab is not identical to the list of languages that are available in the Settings tab.
6 Using the Other Links as a resource The Other Links box contain s three permanent links that provide quick access to product-specific information, such as interactive troublesho otin g and ordering informa tion for genuine HP supplies.
hp instant support Hewlett-Packard Company offe rs hp instant support, an Internet-ba sed support system that collects diagnostic information from your product a nd matches it with t he HP information database . At hp instant support, you can find inte lligent solutions that help you resolve problems quickly and eas ily.
Product Support The Product Su pport link connects you to a Web page that brings together a comprehensive menu of support reso urces that business people need.
Index A accessing the HP Embedded Web Server 2 accessories, verifying installed 10 activity logs digital sending 93 fax 81 addressing Kerberos Authentication 49 settings 89 administrators alerts, sett.
error messages digital sending logs 93 Event Log 15 Event Log 15 Explorer, versions supported 2 F FAQs 56, 102 fax settings 78, 80 features 1 Firefox, versions supported 2 firewalls 2 firmware, updati.
remote configur ation 25 remote firmware updates 23 return e-mail address 2 9 S Safari, versions supported 2 security addressing 90 Authentication Manage r 40 fax modem 81 Kerberos Authentication 45 L.
© 200 7 H e wlett-P ack ard De velopment C ompany , L .P . www .hp.com.
Ein wichtiger Punkt beim Kauf des Geräts HP CM4730 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP CM4730 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP CM4730 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP CM4730 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP CM4730 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP CM4730 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP CM4730 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP CM4730. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP CM4730 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
