Benutzeranleitung / Produktwartung Bt500 des Produzenten HP
Zur Seite of 66
HP bt500 Bluetooth USB 2.0 Wireless Printer Adapter User Guide.
© Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained her ein is subject to change without notice. Reproduction, ad aptation or translation without prior written permission is prohibited, except as allowe d under the copyright laws.
Contents 1 Use your HP Bl uetooth Adapter for printing Bluetooth basics.................... ...................................................................................... ...............7 Installation and se tup........... ................ ...
Access the Bluetooth configuration panel ..................... ................. ................ ................. ...22 Bluetooth Servi ces versus Bluetooth Applica tions ............ ......... ......... ............ ......... ....22 Bluetooth exchange folder.
Authentication....................... ....................... ..................... ....................... ...................... . ... .47 Authorization........ ................ ................ ................ ............ ................ .......
6 HP bt500 Bluetooth USB 2.0 Wireless Printer Adapter.
1 Use your HP Bluetooth Adapter for printing The HP Bluetoot h Adapter wi reless printer adap ter uses Blue tooth wirele ss technology to allow you to print with out using a cable. In genera l, Bluetooth w ireless techn ology is a short-range wireless techno logy that allo ws connecti on between de vices without requiring a cabl e.
2. Remove the cap from t he HP Bluetooth Ada pter and insert it in to the port. LED beha vior The LED on the HP Bluetooth Adap ter tells you what is going on. • On steady—This is t he default state an d means the d evice is installed an d has power.
HP Blueto oth Adapterd evice addre ss Bluetooth de vices have a unique d evice addre ss that cannot be changed. The follow ing are gene ral instructions for finding your pr inter or all-in -one's Bluetooth device address. Consult the documentation fo r your printer or all-in-one for specific instructions.
Follow these i nstructions to print f rom the imag ing or camera so ftware. 1. From the i maging ap plication , sele ct Send vi a Bluetooth . 2. The phone sear ches for Bluetooth devi ces. Select the printer yo u want to use. 3. If you are pro mpted for a Pa sskey, enter i t.
NOTE: If your compute r does not support either of these methods, co nsult your computer documenta tion for help pri nting with Bluetoo th. This procedure is for t he HP or Widcomm sta ck. 1. Click the My Blue tooth Place s icon on your desktop o r in the Task Bar.
Chapter 1 12 HP bt500 Bluetooth USB 2.0 Wireless Printer Adapter.
2 Use your HP Bluetooth Adapter with your computer The Bluetoo th® wireless techn ology provides sh ort-range wire less commun ications tha t replace the physical cable co nnections that traditionally li nk electronic devices. • Network access points • Computers (deskt op, notebook, PDA, etc.
Install the softw are 1. Insert the CD. The Configura tion Wizard should start automat ically. If it d oes not, brow se to your CD and double-click setup.exe . 2. Follow the i nstructions o n the screen. 3. Plug in the HP Bluetooth Adapter wh en requested.
• Access My Blu etooth Places : D ouble-click the Bl uetooth icon , or right-cli ck the Bluetooth ico n and then select Explore My Bl uetooth Places .
Device Ico ns Devices are physical things, su ch as computers, cameras, headsets, etc. Devices can be represented by icons in My Bluet ooth Places. Each type of device is represented by a different icon. The device icons have three states as described bel ow: Normal : Devices that are present in the vicinity are represented by a plain icon.
NOTE: A service may be unavailable because it (or the required hardware) is in use, or because th e requir ed hardware is not installed. Exam ple: i f the f ax mode m is bus y, or not installed, then the fax service will be unavailable, even though Bluetooth supports that service.
Basic operations This section pro vides inform ation on u sing the basi c Bluetooth f unctions. Start or stop Bluetooth To start B luetooth : In the notification area, at the far right of the taskbar, right-click the Bluetooth icon and select Start th e Bluetooth Device .
Create a connectio n from My Blu etooth Places 1. From Windows Explore r, in the Folders pa ne, select My Bluetooth Places , and then select View devi ces in range . 2. In the right pane of My Bluetooth Pl aces, right-cli ck a device name, and then select Connect .
using a fax modem th at is physic ally attached t o this computer, t hen this computer is providing t he Bluetooth fax service. Some services are hardware dependant; f or example, thi s computer canno t provide the fax service unless it has a physical fax modem.
▲ To access the Connecti on Status dialog box, i n My Bluetooth Places , select a device, and then, in the right pane of M y Bluetooth Places, right-click a service name and select Status from the shortcut menu. The Inform ation provided is as follow s: • Status : Connect ed or Not C onnected.
To use Send to Blue tooth (except Inter net Explorer) 1. Select the item to transfer as liste d below: • Windows Explore r: Select one or more files to be transferred. Folders cannot be transf erred. • Microsoft Office: Only the document in the active w indow can be tra nsferred.
How this comput er uses a service that is pr ovided by a remote device is co nfigured on the Client Appl ications tab of the Bluetooth confi guration pa nel. Blueto oth exchan ge folder This is the highest -level directory on this com puter to which a remote Blueto oth device has access.
1. Open the conf iguration pa nel using one of these methods. • In the Not ification area, at the far right o f the taskbar, right-click t he Bluetooth i con and select Advanced Configuration from the shortcut menu or • From Windows Co ntrol Panel, sel ect Bluetoot h Configur ation .
To configure Bluetooth imaging ▲ On the Client Applications tab , select Bluetooth Im aging and click the Proper ties button. The Properties di alog allows you to co nfigure the follow ing: • The applicat ion name: T o change it, hi ghlight th e existing name and ent er the new name.
▲ Open a connect ion to a Bluetooth Human Interface D evice using one of these techniques: • From My Bluetoo th Places • Using the Bluetooth Setup Wizard • Once a HID con nection is establishe d, that connection will persi st.
To config ure a pr inter ▲ On the Client Applications tab , select Printer and click the Proper ties button. The Properties di alog allows you to co nfigure the follow ing: • The applicat ion name: T o change it, hi ghlight th e existing name and ent er the new name.
NOTE: Most Bluetoo th headsets ring when a co nnection is at tempted; a nswer the ring to complete the connection and begin using t he headset as the audi o input/outp ut device for this computer.
The data item typ es that can be synchronized are: Business cards • Calendar i tems • E-mail (with or without atta chments-see below ) • Notes Possible synchronizat ion options f or each of these data item types include: • Do Not Synchronize : This item type will not be synchronized.
To configure faxing ▲ On the Client Applicatio ns tab, select Fax and click the Properties button. The Properties d ialog allows you to configure th e following: • The applica tion name: To chan ge it, highli ght the exist ing name and enter the ne w name.
To configure fi le transfer ▲ On the Client Ap plication s tab, select File Transfer and click the Properties button. The Properties di alog allows you to co nfigure the follow ing: • The applicat ion name: T o change it, hi ghlight th e existing name and ent er the new name.
• How your b usiness card is handle d when it is requested by a remote device: The Send My Busi ness Card options are: • Choose a business card as ne eded: Each time a remote device req uests your business card you must sele ct a card fr om your PIM.
Configure Dial-up Netwo rking ▲ On the Client Applications tab , select Dial-up Networking and click the P roperties button. The Properties di alog allows you to co nfigure the follow ing: • The applicat ion name: T o change it, hi ghlight th e existing name and ent er the new name.
Create a B luetooth Ser ial Port Connec tion Establish a connect ion using on e of these techniques: • Notifica tion ar ea, at the far right of the taskb ar, Bluet ooth icon • From My Bluet ooth P.
• Service Name: The de fault name of each service can be chang ed. • Secure Connecti on: Requires t hat remote device s provide proof of identit y and that all data be encrypted. • Startup Automat ically: Start s the service automa tically whe n Bluetooth is started.
A different no tification so und can be associate d with ea ch local Bluetoo th service. Associate a Soun d with Service A ccess From the Blue tooth Config uration Pane l, Local Servic es tab: 1. Double-click a service name a nd th en select the No tif ications tab .
Bluetoot h Serial Port The Bluetooth Seri al Port service enables a re mote Bluetoo th device to establish a wireless serial connection with this computer. The wi reless serial connection may b e used by applicatio ns as though a physical serial cable connected th e devices.
• Select the physical modem t o be used from the Mod ems - shortcut menu. • Set the common co nfiguration properti es of the service, an d then click OK. Fax Service The Fax service allows a rem ote Blueto oth device to se nd a Fax via a modem th at is physically attached to this computer .
• Send To • 3 ½ floppy (A) - sends the selected file to the 3 ½ inch floppy drive on this compu ter • Public Folder on My Device : Sends the selected file to the Public Fol der on this computer. • Rename: Applies only t o empty folders; fil e names and the names o f folders that contain object s cannot be changed using thi s technique.
The Head set Service now monitors th e phone and di splays a notif ication b alloon over the Bluetoot h icon in the No tification a rea, at the far right of t he taskbar when a n incoming call is detected .
1. Configure Bluet ooth: Right-cl ick the Bluetoot h icon in t he notifica tion area, sele ct Advanced Config uration, and t hen a . From the Lo cal Services tab, select Ne twork Access, and then click Properties.
NOTE: PIMs that are no t installed on this computer wi ll not appea r in the shortcut menus. When the PIM that is associ ated with an individual d ata type is changed on the PIM Item Transfer page, that data type is also changed fo r the PIM Synchroni zation service.
Change the Selected PI M On the PIM It em Transfer propert ies page, Received it ems section, there is a Business Cards shortcut me nu. When a PIM wa s selected durin g initial setup the selected item in this menu was set to the same PIM. To change th e PIM used for the de fault business card, open this shortcut menu and se lect a new PIM.
Hardware settings The Hardware tab of the Blu etooth C onfigurati on Panel provides basic informa tion about the Bluetoot h hardware i nstalled on th is computer and a ccess to the Ad vanced Settings dialog box, i f required: • Devices: • Name: The nam e of the device, e.
Click Apply to implement the cha nges. A dialog box i s displayed w ith notif ication t hat the Bluetooth device a ttached to this compu ter must be reset bef ore the change(s) wil l take effect . Click Yes t o reset the Bluetoot h device now. All open Blue tooth connect ions will be closed.
To delete a device f rom the list: ▲ In the list of devices allowed t o access this computer, select the device to be removed from the l ist, and th en click De lete.
Temporari ly Override the Discovery o f Specific D evices In the Bluet ooth Conf iguration Pan el, from t he Discovery tab, select Report a ll Bluetoot h devices. The specifica lly selected devices will be discovered al ong with all o ther devices. To re-enable specific device discovery, re-select Repo rt Only Selected Bluetooth Devices.
NOTE: The devices must be paired. 1. From My Bluetooth Places, right-c lick a paired de vice, select Properti es, and then the Authorizatio n tab. 2. Select the services i n the list box for whic h Authorization will NOT be required, and then click OK.
If there are no d uplicate files, t he Authorizat ion balloon is displayed on t he server immediately. To Pair with Another Device 1. If Secure Connecti on is enabled, the first time two devices attem pt to connect, a prompt to pai r the devices is displa yed.
Chapter 2 50 HP bt500 Bluetooth USB 2.0 Wireless Printer Adapter.
3 Troubleshooting TIP: Many issues you do n ot find mentioned h ere may be resol ved by unplug ging the adapter, turning the printe r or computer off, t hen on, and p lugging the a dapter back in.
Table 3-3 Print qua lity is poor Photo was taken in low reso lution. Change the setting in your camera to take pictures with the highest quality. NOTE: VGA resolution (640 by 480) cameras may not produce a high-quality photo even at their highest resolution .
• Click the OK button. • Click the OK button to close the Bluetooth Configuration Panel. Table 3-8 How do I Determine the Bluetooth device address (BDA) of my hardware device In the Bluetooth Configuration Panel, on the Hardware tab, in the Devices section, select the device you want to determine the address of.
Table 3-9 Inter net connection s haring does no t work This occurs because Internet Connection Sharing was enabled when Bluetooth was installed (this is a Microsoft Windows behavior and is considered proper operation).
4 Technical information Technical specifications General • Bluetooth Specification 2.0 compliant • Power Requirement: Provided by the host • Power Consumption a t 5V • 1mA at standby • 7mA at idle • 65mA (typical) at point-point o peration • 75mA (max) at operation Radio • Frequency Range: 2.
Limited warranty statement Customer care For assistance, call 1-800-HP-INVENT (North Amer ica only) or go to the Customer Car e website at www.hp.com/support . Environmental product stewardship prog ram Hewlett-Packard is committed to pr oviding qualit y products in an en vironmentally sound manner.
to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been designed to separate easily. Fasteners and other connections are easy to locate, access, and remove using common tools. High priority parts hav e been designed to access quickly for efficient disassembly and repair.
Disposal of waste equipment by users in private hou seholds in the Eur opean Unio n Disposal of W aste Equipment by Users in P rivate Households in the European Union This symbol on the product or on its pack aging indicates that this product must not be disposed of with your other household waste.
• Noise emission statement for Germany Regulatory model identification number For regulatory identificatio n purposes, your product is assigned a R egulatory Model Number. The Regulatory Model Number for your product is SD C AB-0705. This regulatory number should not be confused with the marketing name (HP bt500 Bluetoot h USB 2.
VCCI (Cl ass B) compli ance statement fo r users in Japa n Noise emis sion statemen t for Germany Geräusc hemission LpA < 7 0 dB am Arbeits platz im Normalbetr ieb nach DIN 4 56 3 5 T .
Notice to users in B razil A viso aos usuários no Brasil Es te equipamento oper a em caráter sec undári o, isto é, não te m dir eito à pr oteção contr a interf erênc ia pr ejudi c ial , mesmo de estações do mesmo tipo , e não pode causar interferênc ia a sistema s oper ando em caráter primár io .
Notice to users i n Pakistan Taiwan DG T warning statement Notice to user s in Taiwan Chapter 4 62 HP bt500 Bluetooth USB 2.0 Wireless Printer Adapter.
Notice to use rs in Russia Notice to users in South Africa T A-2007/172 APPROVED Regulatory wireless statements 63.
Declaration of conformity (European Economic Area) DECLARATION OF CONFORMITY according to ISO/IEC 17050-1 and EN 17050-1 Manufacturer's Name: Hewlett-Packard Company DoC#: SDCAB-0705-rel.3.0 Manufacturer's Address: 8000 Foothills Blvd. Roseville CA.
Index A access modes printing 8 audio 27 B Bluetooth Windows information 14 Bluetooth application audio 27 dial-up networking 32 fax 29 file transfer 30 headset 27 HID 25 PIM item transfer 31 PIM sync.
printing 7 software installing 13 start or stop Bluetooth 18 66 HP bt500 Bluetooth USB 2.0 Wireless Printer Adapter.
Ein wichtiger Punkt beim Kauf des Geräts HP Bt500 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP Bt500 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP Bt500 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP Bt500 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP Bt500 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP Bt500 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP Bt500 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP Bt500. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP Bt500 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
