Benutzeranleitung / Produktwartung AA-RWF3A-TE des Produzenten HP
Zur Seite of 159
HP S tor age W or ks S AN S w itc h ins tallati on gui de P art number: AA-RWF3A-TE Fi fth edition: M ay 200 7.
Legal and notice information © Copy righ t 2004-200 7 Hew lett-P ackar d Deve lopment Compan y , L.P . © Copy r ight 2004-200 7 Br ocade Communications S yste ms, Incorpor ated Hewl ett-P ackar d Co.
Co nt e n t s A b o u t t h i s g u i d e .................... 1 1 I n t e n d e d a u d i e n c e .......... ............... ..... 1 1 R e l a t e d d o c u m e n t a t i o n ................. ........... 1 1 D o c u m e n t c o n v e n t i o n s a n d s y m b o l s .
S A N S w i t c h I S L T r u n k i n g g r o u p s ..................... ... 3 1 O p t i o n a l S A N S w i t c h f e a t u r e s.... ............... ...... 3 2 S A N S w i t c h o p t i o n a l p o r t l i c e n s e s a n d h a r d w a r e ........
4 / 3 2 S A N S w i t c h n o n p o r t s i d e L E D s .. ............... ..... 7 8 4 / 6 4 S A N S w i t c h p o r t s i d e L E D s ................... ..... 7 9 4 / 6 4 S A N S w i t c h n o n p o r t s i d e L E D s ........... ........... 8 2 4 / 3 2 B S A N S w i t c h L E D s .
B S M I n o t i c e ................ .............. 1 1 6 J a p a n e s e n o t i c e .............. .............. 1 1 7 K o r e a n n o t i c e s .................... ........ 1 1 7 S a f e t y .................... .............. 1 1 8 B a t t e r y r e p l a c e m e n t n o t i c e .
S u p p o r t e d H B A s ........ ............... ........ 1 4 5 G l o s s a r y ........ ................ 1 4 7 I n d e x ............ ............. 1 5 7 S A N S witc h installation guide 7.
Fi g u r e s 1 4 / 8 a n d 4 / 1 6 S A N S w i t c h p o r t s i d e ............ ...... 1 7 2 4 / 3 2 S A N S w i t c h p o r t s i d e .......... ............ 2 1 3 4 / 3 2 S A N S w i t c h n o n p o r t s i d e ..................... 2 2 4 4 / 6 4 S A N S w i t c h p o r t s i d e .
Ta b l e s 1 D o c u m e n t c o n v e n t i o n s .................... ..... 1 2 2 O p t i o n a l p o r t l i c e n s e s a n d h a r d w a r e k i t s ................. 3 3 3 S A N S w i t c h s h i p p i n g c a r t o n c h e c k l i s t .........
10.
About t his gui de This inst allation guide pr ov ides inf ormation to help y ou set up and configur e the f ollo w ing HP sw itches: • HP Stor age W orks 4/8 SAN S wit ch • HP St or age W or ks 4.
Doc ument con v enti ons a nd s y mbols This document follo ws the conv entions in Ta b l e 1 . T able 1 Document c on v ention s Conv ention Element Medium blue te xt: Fig u re 1 C ros s -re fe re nce links and e-m ail address es Medium blue under lined text ( h ttp :// www .
R ack st ability Rac k stabilit y pr otects personnel and equipment. WA R N I N G ! T o r educe the risk of per sonal injury or damage to the equipment , be sure t hat: • T h el e v e l i n gj a c k sa r ee x t e n d e dt ot h ef l o o r . • The fu ll weigh t o f t he ra c k res t s o n t h e l eve l i n g j a ck s .
HP author i z ed r eseller F or the name of y our n eare st HP-authori z e d r eseller: • In th e Uni ted States, c all 1 -800-345-1518 . • Else wher e , vi sit the HP w eb site: h ttp:/ /www .hp.com .T h e n c l i c k C o n t a c t H P t o fi nd locations and telephone number s.
1O v e r v i e w Thi s chapter desc ri bes the f ollo w ing topi cs: • 4/8 and 4/16 SAN S w itch models ,p a g e1 5 • Enabling E_P orts on the 4/8 S AN S wit ch ,p a g e1 8 • 4/3 2 S AN Sw itc h.
4/8 and 4/16 S AN S wit c h featur es The 4/8 and 4/16 S AN S w itc hes support link speeds o f 1, 2 , and 4 Gb/s. The s w itc h ope r ates in a fa bri c that contains multiple s witc hes or as the only s wit ch in a f abr ic . The 4/8 and 4/16 S AN S witc hes pro vi de the follo wing f eatur es: • Air-cool ed 1U chassis .
4/8 and 4/16 S AN S w itch c hassis Thi s secti on desc ribe s the chas sis fr ont (port side) and r ear (nonport side). 4/8 and 4/16 S AN S w itch port side All LEDs resi de on the port side of the s wit ch (se e Fi g u r e 1 ) .
3. Contact y ou r HP r epresentati ve to pur chase the HP Stor age W orks 4-P ort Up gr ade Lic e n se , par t number T4 2 60A. 4. Upon r eceipt of the HP Stor ag e W orks 4-P or t Upgr ade Li cense , install the license: a. Lo g in t o t he 4 / 16 Swit ch a s admin .
SA N Sw i t c h l i c e nsing SA N Swi t c h e s o per ate differ ently in the netw ork , depending on whic h HP Stor age W orks domain lice ns es are install ed. The 4/ 8 Base SAN S witch has no E _P o rt, unless you pur chas e and install the HP S tor age W orks 4/8 F ull Fa bri c Upgrade L icense .
4/3 2 S AN S w itc h m odels T h eH PS t o r a g e W o r k s4 / 3 2S A NS w i t c hm o d e l si n c l u d e : • HP Stor age W orks 4/3 2 SAN S wit ch Base ship s w ith 16 ports activ ated and include s Z oning and Adv anced W eb T o ols as standar d softwar e components .
4/3 2 SA N S w i tc h por t side Fi g u re 2 show s the por t side of the 4/3 2 SAN S witc h and identifi es the components. scale: 5/16" = 1" scale: 1/8" = 1" ! IO IO I LNK SP D 0 4 3 7 1 5 2 6 8 12 11 15 9 13 10 14 16 20 19 23 17 21 18 22 24 28 27 31 25 29 26 30 ! IOIOI LNK SPD 1 MRO25009a 4 5 6 7 3 2 1.
4/3 2 SAN S w itch non port side Fig u re 3 show s the nonport si de of the 4/3 2 SAN S witc h, w hic h contains the po wer supplie s (including the A C pow er inlet and A C pow er sw itc h) and fans . Sc a le: 1/8" = 1" MRO25010a 3 4 5 2 1 1.
NO TE: Check the p ort status to determine whether the licen se is pr einstalle d . Use the portshow command f or ports 16 t hr oug h 31. If the por t stat us o utpu t indi cates Started and Licensed , all 32 ports ar e acti va ted.
4/64 S A N S w itc h models T h eH PS t o r a g e W o r k s4 / 6 4S A NS w i t c hm o d e l si n c l u d e : • HP Stor age W orks 4/64 S AN S wit ch Base ships w ith 3 2 ports a cti vated and include s Z oning and Adv anced W eb T o ols as standar d softwar e components .
4/64 S AN S w itc h c hassis This sec tion pr ov ides an illustr ation of the f r ont (port side) an d r ea r (nonport side) of the S AN S witc h c hassis . 4/64 S A N S w itch port side Fi g u re 4 sho ws the port side and ident ifi es the components .
S cale: 1/ 8 " = 1" A T T E N T IO N : M a x i m u m s c r e w l e n g t h fo r r a c k m o u n t in g t o b e 5 m m o r 1 3 / 6 4 i n . 3 2 3 5 3 3 3 4 3 6 3 9 3 73 8 4 0 4 3 4 1 4 2 4 4 4 .
4/64 S AN S w itc h por t number ing Fi g u re 5 identif ies port numbering for the 4/64 S A N S witch . S cale: 5/16" = 1" 32 36 33 37 34 38 35 39 0 4 1 5 2 6 3 7 40 44 41 45 42 46 43 47 8 .
S cale: 1/ 8 " = 1" A T T E N T IO N : M a x i m u m s c r e w l e n g t h f o r r a c k m o u n t in g t o b e 5 m m o r 1 3 / 6 4 i n . S cale: 5/16" = 1" 251 8 2a 5 6 1 2 3 4 1. Nonport side of s w itch 2. Pow e r s upply 2 3 . F a na s s e m b l y3 4 .
4/3 2B S AN S w itc h mod els Th e HP S to rag e W o r ks 4/3 2B S AN S wit c h models include : • HP Stor age W orks 4/3 2B SAN S wit ch ship s with 16 ports acti vated , and includes a F ull Fabr ic licens e , Z oning and Adv anced W eb T ools as standar d soft w ar e components.
4/3 2 B S AN S witc h por t side Fig u re 7 sho ws the port side of the 4/3 2B SAN S wit ch and identif ies components . 1 2 3 4 25271a 5 1. Serial por t 4. P ow e r cor d retainer 2. E t h e r n e t o r c onsole port 5 . Sw i tc h ID pul lo u tt a b 3 .
Loc a ti n g 4 /3 2B SAN Switch F C p or t s FC ports are n umbered f rom left t o ri ght , in eight-port gr oups, and ar e also number ed on the faceplate , see Fi g u re 8 .
NO TE: The maximum num ber of ports p er trunk for the 4/8 a nd 4/16 S AN Sw itches i s f our . The FC ports are number ed fr om left to r ight in gr oups of fo ur . Thi s arr angement indicate s the gr oups of ports that can be us ed in the same I SL trunking gr oup .
SA N Swi t c h o p t i o n a l p o r t l i c e n s e s a n d h a rd wa re Ta b l e 2 lists the optional port licenses and har dwar e kits avai lable for S AN S wit ches .
NO TE: T o obtain the latest inf ormati on on hardw are and softwar e c om- pon ents, go to the B- Series section of the following web pag e: h ttp:// ww w .
2 Ins talling an d confi guring SA N Sw i t c h e s Thi s chapter desc ri bes the f ollo w ing topi cs: • Shipping carton c ontents , page 3 5 • Installati on and safety consider ations , page 3 8.
Ta b l e 3 identif ies the c arton contents inc luded w ith your SAN S witc h. T able 3 S AN S witch s hipping c art on checkli st Number Description 1 One S AN S wit c h Acc es sori es Box containing: • One 3 .
Number Descri ption • One HP S tor age W or k s4 / 1 6S A NS w i t c h • One HP S tor age W or ks 4/3 2 S AN S wi tch • One HP S tor age W o rks 4/ 3 2B SAN Switch • One HP S tor age W o rks 4.
Installati on and saf et y consi der ations Install t he sw itch u sing one of the f ollo wi ng methods: • As a stand-alone unit on a flat surf ace. See Installing the sw itch as a stand-alone de vi ce on pag e4 0 .
IMPOR T ANT : T h e4 0º Cv a l u ea p p l i e st ot h ea m b i e n ta i rt e m p e r a t u r ea tt h ea i ri n t a k ev e n t so nt h e nonpo rt side o f the s wit ch . The t emper atur e inside t he sw itch can be up t o 80 ºC (17 6 ºF) dur ing swit ch oper ation .
• Ensur e that the ambient air temper ature does not e xceed 40 ºC (104 ºF ) while the sw itch is operating . NO TE: Do not bloc k air ven ts. The s witc h uses ambi ent air for cooling . Installing the s w itc h as a s tand-alone de v ice T o install the s w itc h as a stand- alone unit: 1.
Installing the s w itc h using the S AN S w itch R ac k Mount K it This sec tion pr ov ides instr ucti ons for ins talling the S A N S witc h in the follo w ing HP cus t om ra c ks : • HP S yst em/e.
T able 4 SAN S witch R ack Mount Kit har dw are Item Description Tw o r e a r m o u n t i n g brac ket s A ri ght inner rail and a right out er rail A left inner rail and a left outer rail 14 #8-3 2 x 3/16 -inch Phillip s pan-head scr ew s with thr ead lock for use w ith the S AN S witc h 2/3 2 only .
CA UTION: F o rp r o p e ra i r f l o w ,t h eS F Pm e d i as i d eo ft h eS A NS w i t c hm u s tf a c et h er e a ro ft h er a c k . T o instal l the sw itch in a rac k: 1. V er ify that the req uir ed parts and hard war e are a vailable . See Ta b l e 3 on page 3 6.
4. Assemble the outer r ails by completing option a or option b : a. Attach the left outer r ail and the ri ght outer r ail to the rear mounting br ack ets using two 1/4-20 he x nuts with capti ve st ar lock-w ashers att ached loosel y , as show n in Fi g u re 1 2 .
b. Depending on the rac k yo u are u sing, complete one of the f ollow ing tasks: • Fo r HP 10000 ser ies r acks, inst all tw o #10-3 2 x 1/2-inch Phillips pan-head sc r ew s with capti ve st ar lock-w ashers and tw o #10 adapter washer s in the upper and lo wer hole locati ons of the r ight r ail.
Figure 1 4 A ssemb ling t he ou ter rails (HP Sy stem /e Rac k) 5. Depending on the dev ice model, the S AN Sw itch R ack Mount K it r e quir es differ ent sc r ew ty pes fo r secur ing the inner rails . Use Ta b l e 5 to determine the number and scr ew type for your spe c ific s witch.
6. Identify the sc r ew hol es to be used on the i nner r ails designed f or the sw itch: • T o attac h the inner r ails to the S AN S wi tch 2/3 2 use the sc re w holes mark ed 32 .
8. If y ou ar e instal ling the 4/8, 4/16 or 4/3 2B S AN Sw itc h, v erify that a plenu m (an air duct that attac hes to the s witc h rails, ena bling the sw itch to dr aw cooler air int o the s w itch f r om outside the r ack , rather than dr aw ing in heated air fr om within the r ack .
Installing the P lenum (if r equir ed) If inst alling one of the f ollo w ing S AN sw itches onl y , you mus t install the plenum that ships in the accesso r y kit w ith the rac k mount hard war e: • 4/8 S A N S witc h • 4/16 S AN S witc h • 4/3 2B SAN S witc h To i n s t a l l t h ep l e n u m : 1.
NO TE: Fig u re 1 7 il lustrates h ow to attac h the ple num to th e 4/8 o r 4/1 6 SAN Switch spec if icall y . If inst alling the plen um on the 4/3 2 B S AN S wit ch , the pr ocedure and fi gu r e also applies. I O I O I ! 25052a 1 2 A T T E N T I O N : M a x im u m s cr e w le ng th fo r r a c k m o u nt in g t o be 5 m m o r 1 3 / 6 4 in .
Figure 1 8 Securing the switc h (in HP 9 000 Series or HP 1 0000 Series Rac ks) Figure 1 9 Sec urin g th e switch (in an H P S ystem/e ra ck) 3. Ti ghten the he x nuts installed earli er .
C abling and conf igur ing the S AN S w itc h The S AN Sw itch must be conf igur ed to ensure cor r ect operati on wi th a net w ork and fabr ic. F or instruct ions on conf iguri ng the sw itch t o operat e in a fabr ic containing s wit ches f rom other v endors, see the F abri c OS administr ator’s guide .
C onnecting the S AN S w itc h to the fa br ic Connect ing the S AN S w itch to the f abri c inv olv es the fol low ing steps: 1. Obta in r equir ed items on page 5 3 2. Mak e a seri a l connec tion on page 5 3 3. Apply po wer to the s w itch and log in on page 56 4.
NO TE: I ft h es e r i a lp o r to nt h e w o r k s t a t i o nu s e sa nR J - 4 5c o n n e c t o ri n s t e a do f an RS-2 3 2 connector , r emov e the adapte r on the end o f the ser ial cable and insert the e x posed RJ-4 5 connector into t he RJ-45 ser ial port on the wor k station .
NO TE: Fi g u re 2 0 show s the 4/16 SAN S wit ch; ho we ver , this pr ocedu r e is similar for a l l SA N Swi tch e s. 3. Clos e any s er ial communi cation pr ograms r unning on the w orkst ation .
Apply pow er to t h e s w itch and log in Once a ser ial connec tion is established , apply p o wer to the sw itch: 1. Connect the po wer cor d to a pow er inlet on the sw itch and a po wer sour ce, as sho wn in Fig u r e2 1 . NO TE: The 4 /32 , 4/ 32 B and 4/64 SAN S wi tc h models u se two po wer co r ds .
4. When the terminal emulator a pplication , whic h uses a seri a l connecti on, stops r eporting i nf ormation , press Enter t o display the login pr ompt. 5. Log in u sing the administr ativ e account; the logon is admin and the default pass wor d is password .
Cr eate an Ether net connecti on T o cr eate a n Ethernet connecti on: 1. Connec t an Ethernet cable t o the Ethernet port and to t he wor kstati on, or to an Ethernet netw ork containing the wor kstatio n, as sho wn in Fig u re 22 on p age 5 8.
3. At the F abr ic P arameters pr ompt, enter y and pr ess Enter : Fabric Parameters (yes, y, no, n): (no) y 4. Ente r a uniq ue domain ID , suc h as the domai n ID used b y the pr ev io us s wit ch , if it is still a vaila ble: Domain: (1..239) [1] 3 5.
C onnect the cab les CA UTION: The minimum bend r adius fo r a 50-micr on cable is 2 inches under full t ensile load and 1.2 inches with no tensile l oad. B ecau se the y are easil y o verti ghtened, HP does not r ecommend tie wra ps for opti cal cables.
Set the sw itch d ate and time The date and time s wit ch settings ar e used f or logging ev ents. S w itch oper ation does not depend on the date and tim e; a sw itch w ith an incorr ect date and time value still fun ct ion s pro perly .
Ex ample 3: switch:admin> tsclockserver LOCL switch:admin> tsclockserver 132.163.135.131 switch:admin> Set t he ti me z on e T o set the time z one : 1. Log i n a s admin . 2. Issue the f ollo wi ng tstimezone command: tstimezone [ hour offs et ][ minut eoff set ] • F or P acifi c Stan dard Time , enter tstimezone –8,0 .
T able 6 Ti me zone c ommand v alue s Local tim e tstimezone parameter Atlan tic S tandar d –4, 0 Atla ntic Daylight –3, 0 Ea st e rn S t a n da r d –5, 0 Ea st e rn D a yl i g ht –4, 0 Centr .
64 Installing and conf igur ing S AN S wit ches.
3M a n a g i n gS A NS w i t c h e s Thi s chapter desc ri bes the f ollo w ing topi cs: • Po w e r i n g o n a n d o f f , page 66 • S AN S w itch management featur es , page 6 7 • Managing S A.
Po w e r i n g o n a n d o f f The f ollow ing secti ons pr o vi de informati on on p o wer ing spec ifi c S AN Sw itch models on and off . 4/8 and 4/16 S AN S w itc h models To p o w e r o n : 1. Connect one end of the po wer cor d to the A C inlet on the s wit ch; connect the other end to a po wer s our ce.
S AN S w itc h managem ent f eatur es SA N Swi t ch e s u s e b uilt-in management tools to help y ou monitor fabr ic topolog y , chec k port status , a nd debug the s wit ch . Ta b l e 7 lists the management t ools av ailable. When running IP o ver FC , these management tools must be supported b y both HBA and HB A dri vers .
T able 8 Ex ample of a set of gate wa y addre sses Connection type Management stati on 1st switch 2nd switch 3rd switch Ethernet 19 2 .168.1. 099 19 2 .168.1.10 204.1.1.11 204.1.1.12 FCIP 19 2 .168.6 5 .0 9 19 2 .168.6 5 .10 19 2 .168.6 5.11 19 2 .168.
Inter pr eting LED acti v it y S yst em acti vity and status can be deter m ined thr ough the LEDs on the sw itch . Ther e are thr ee possibl e LED s tates that displa y either gr een or amber : • As t e a d yl i g h t • Af l a s h i n gl i g h t • No lig ht LEDs display e ither green or amber colors .
4/8 and 4/16 S AN S w itc h LED patterns Ta b l e 9 and T able 10 on page 71 summari z e LED locations , color s, and r ecommended act io ns . P o wer Stat us LE D pa t tern s The s yst em and pow er LED patterns ar e desc ribed in Ta b l e 9 .
4/ 8 an d 4/ 16 S A N S witch s ystem Stat us LE D pa t terns The s ys tem status LED patter ns ar e desc ribed in Ta b l e 1 0 . T a ble 1 0 Sy stem s tatus LED pat terns during norm al operation LED name LED color Hard ware status Recommended ac tion No light Swi t ch i s o ff, bo ot is not complete, or boot failed .
4/8 and 4/16 S AN S witc h por t LED patterns E ach port include s two LEDs: a P ort Speed indicator and a P or t St atus indicator . Ta b l e 11 desc ribe s the LED locations , c olor s, and r ecommended actions.
LED name LED color Har dwar e status Recommend ed actio n Ste ady g reen, amber off P or t is tr ansm itting or re ce ivi n g a t 2 G b/ s . No action r equired . Gr een off , amber off P or t is transmitt ing or re ce ivi n g a t 1 G b/ s . No action r e quir e d.
4/8 and 4/16 S AN S wit ch Ether net LED patterns E ach Ether net port has two LEDs desc ribed in Ta b l e 1 2 . T ab le 1 2 Ethernet LED patterns LED name LED color Hardw are stat us Rec om men de d a cti on No light P or t speed is 10 Mb/s . No action r equired .
scale: 5/16" = 1" 0 4 3 7 1 5 2 6 8 12 11 15 9 13 10 14 16 20 19 23 17 21 18 22 24 28 27 31 25 29 26 30 ! IOIOI LNK SPD 0 4 3 7 1 5 2 6 ! IOIOI LNK SPD MRO25012a 1 2 4 5 3 6 7 8 1. Sy stem Status LED 2. L i n k L E D 3. Top p o r t L E D s ( 0 t h ro u g h 3 ) 4.
Ta b l e 1 3 descr ibes the 4/3 2 SAN S wit ch port side LEDs. T able 1 3 4/ 3 2 S AN S wi tch port s ide LED patte rns LED name LED color Har dwar e status Recommend ed action No light S witc h is off or there is an internal po w er suppl y failur e.
LED name LED colo r Hardwar e status Recommended ac tion No ligh t No sign al or light carrier (me dia or cable) de tect ed. Chec k the trans cei ver and ca ble . Slo w-flashing gr een (flashing in two-second intervals) P or t is online but segmented because of a loop back cable or incompatib le s w itch connecti on.
4/3 2 S AN S w itc h nonport side LEDs The 4/3 2 SAN S wi tch has the f ollo wing nonport side LEDs: • T wo P o wer Suppl y LEDs • Three Fan Sta tus LEDs Fig u re 25 s h o w st h el o c a t i o n so ft h en o n p o r ts i d eL E D s . MRO25013a 1 2 3 4 5 1.
Ta b l e 1 4 desc ribe s the 4/3 2 S AN S witc h nonport side LEDs . T a b l e1 44 / 3 2S A NS w i t c hn o n p o r ts i d eL E Dp a t t e r n s LED name LED color Hard ware stat us Recom mended action No light P ow er supply is not r eceiv ing p o w e ro rp o w e ri so f f .
S cale: 1/4" = 1" 32 36 33 37 34 38 35 39 0 4 1 5 2 6 3 7 40 44 41 45 42 46 43 47 8 12 9 13 10 14 11 15 48 52 49 53 50 54 51 55 16 20 17 21 18 22 19 23 56 60 57 61 58 62 59 63 24 28 25 29 26 30 27 31 ! IOIOI 32 36 33 37 34 38 35 39 0 4 1 5 2 6 3 7 ! IOIOI 251 8 3a 7 8 9 1 4 5 6 10 11 12 2 3 1.
T a ble 1 5 4/64 SAN S witch port si de LED pa tte rns LED name LED color H ardw a r e status Recommend ed action No light Sw itch is off or there is an internal po wer sup ply f ailur e. V erify that the s yst em is on (both po we r sw itches s et to “1”), the po w er cables ar e attac hed, and the pow er sour ce is liv e.
LED name LE D co lo r H ardwa re s tat us Re com m en ded a c ti on No light No signal or li ght carr ier (media or cable) detected . Check the tr anscei ve r and cable . Slo w-flashing gr een (flashing in two-second intervals) Po r t i s o n l i n e b u t s e g m e n t e d because of a loop back cable or incompatible s witc h co nn e ct ion.
S cale: 5/16" = 1" 251 8 4a 5 6 7 1 2 3 4 8 9 10 1. P ow er Supply 2 S tatu s LED 2 . P ow er suppl y 2 3 . F an assembly 3 4. F an assembly 2 5. Fa n a s se m b l y1 6. P ower S up p l y1S t a t u sL E D 7 . P o wer sup ply 1 8. F an Assembl y 3 Statu s LED 9 .
T a ble 1 6 4/64 SAN S witc h non port side LED p at terns during norm al operat ion LED name LE D co lor Ha rdware s tat us Re co mm en de d ac ti on No light P ow er supply is not rece iv ing p o w e ro rp o w e ri so f f .
4/3 2B S AN S w itc h LEDs The 4/3 2B SAN S wit ch model integrate s the follo wing LEDs: • Sys t e m S t a t u s L E D • Po w e r S t a t u s LED • P or t St atus LEDs (3 2 ), one for each FC p.
LED name LE D co lor Ha rdware s tat us Re co mm en de d ac ti on No li ght S ystem is off , boot is not complete, or boot failed. V erify that the sy stem is on and booting is complete . Stead y gr een S ys tem is on and po we r su pp l ie s ar e functi oning p ro p er ly .
LED name LED color Hardwar e status Recommend ed action No l ight No sig nal or l ight carrier (me dia or cable) detected . Check th e transceiv er an d cable. Slo w flashing gr een (flashing in tw o-se cond intervals) Po r t i s o n l i n e b u t s e g m e n t e d becau se of a loop back cable or incompatible s wit ch c onn e ct ion.
P OS T and boot spec if icati ons When the s wit ch is po we red on or r ebooted, the sw itch perfor m s P OS T . T otal boot time with P OS T is at least thr ee minutes.
Inter pr eting P O S T r esults T o d ete rmine whe ther PO ST c ompleted succes sfull y and whether any er r ors w ere detect ed: 1. Ve r i f y t h a t t he s w itch LEDs i ndicate that all components ar e healthy .
90 Managing S AN S wi tches.
4 Ins talling fi eld -r ep l acea b le units The 4 /8 and 4/16 S AN S wi tche s do not r equire r egular maintenance and do not contain an y FRUs; thes e sw itche s are thems elv es FRUs. The 4/3 2 SAN S witc h and 4/64 S AN S w itches contain t w o FRUs: the pow er supply and the f an assembly .
Sc a le: 1/8" = 1" MRO25014a 4 2 1 3 1. P ow er Supply 2 S tatu s LED 2 . P ow er suppl y 2 3. Power S upply 1 S tatu s LED 4. P o we r s upply 1 F i g u r e2 94 / 3 2S A NS w i t c hp o w e.
T a b l e1 84 / 3 2S A N S w i t c hP o w e rS u p p l yS t a t u sL E D s LED color Meaning Correctiv e ac tion No ligh t The po wer suppl y i sn o tr e c e i v i n g po wer or is off . V erify that the po wer suppl y is on and seated and that the po wer cor d is connected to a fun ctio nin g power so urce.
Pr ocedur e T o r e place a po wer suppl y in the 4/3 2 S AN S w itch , see Fi g u r e 30 on page 9 4: 1. If the s w itch w ill re main pow ered on , ver if y that the f uncti oning pow er supply (the one not being r eplaced) has been po wer ed on for at least four seconds and displa ys a gr een LED.
CA UTION: Do not for c e the installat ion . If the power supply does not slide in easily , make sur e that it is or iented cor rectl y bef or e continuing . 8. Sec ure the pow er suppl y to the c hassis b y tightening the capti ve sc re w . 9. P lug the pow er cord into the po wer suppl y a nd then pr ess the A C pow er sw itch to turn it on.
R eplac ing the 4/3 2 S AN S w itc h f an as sembl y The 4/3 2 S AN Sw itch con tains thr ee fan a ssembli es, a s sho wn in Fig u re 3 1 .F a b r i c O S identif ies the fans f r om left to r ight as F an 3, Fan 2 , and F an 1. Sc a le: 1/8" = 1" MRO25016a 1 2 3 1.
T a b l e1 94 / 3 2S A NS w i t c hF a nS t a t u sL E Db e h a v i o r LED color Mean ing Co r r ect i v e act ion No light F an assembly is no tr e c e i v i n gp o w e r . V erify that the fan assembl y is seated in the swit ch. Stead y green Fan as sembly is oper ating normally .
Sc a le: 1/4" = 1" MRO25017a 2 1 1. F an ass embl y 2 . Captiv e scr ew Fig ure 32 I nstallin g the fan a ssemb ly in a 4 /3 2 SAN S witc h CA UTION: Do not f or c e the installation. If the fan assembl y does not slide in easily , mak e sur e tha t it is o r ie nt ed cor rec tl y bef or e conti nuin g.
R eplac ing the 4/64 S AN S w itc h po w er suppl y The 4/64 S AN S w itch u ses two po wer su pplies, as sho wn in Fi g u re 33 . The F abr ic O S identif ies the pow er supplies f r om ri ght to left on the nonpor t si de as Power Supply #1 (on the ri ght) and Power Supply #2 (on the left) .
Items requir ed Replac ing a 4/64 S AN S wi tch po wer su pply shoul d tak e less than tw o minute s and r equires the f ollow ing items: • Ne w pow er suppl y • Phillips #1 scr ew dri ver 100 Ins.
Pr ocedur e T o replace a po wer suppl y in the 4/64 S AN S wit ch: 1. If the s w itch w ill remain po w er ed on, v erify that the f unctioning po wer suppl y (the one not being r eplaced) has been po wer ed on for at leas t fo ur seconds and displa ys a gr een LED.
scale: 1/4" = 1" S cale: 3/ 8 " = 1" scale: 1/4" = 1" 251 88 a 2 1 4 3 7 5 8 9 6 1. A C pow er receptac le 2 . Status LED 3 . Handle (inset) 4. Captiv es c r e w( i n s e t ) 5 . A C pow er sw itch 6. P ow er supply 7. P o w e r s u p p l y 8.
10 . V erify that the LED on the new po wer suppl y display s a steady gr een light w hile the s wi tch is oper ating (see Ta b l e 1 8 on p age 9 3) .
Ta b l e 2 0 d e s c r i b e st h eF a nS t a t u sL E D sa n dp r o v i d e sc o r r e c t i v ea c t i o n s . T able 20 Fa n Stat us LED s LED color Mea ni ng Co rr ect iv e act ion No light F an assembl y is no t r ecei ving po wer . V erify that th e fan assembl y is seated in th e swit ch.
scale: 1/4" = 1" S cale: 3/ 8 " = 1" 251 8 6a 1 4 2 3 5 6 1. F an assem bly unit 2 . Capti ve sc re w 3. Fa n S ta t u s L E D 4. Handle 5 . Fan ass embly unit 6. C ap tive s crew Figure 3 6 Inser ting the fan ass embly in a 4/64 S AN Switch CA UTION: Do not for c e the instal lation .
R eplac ing the 4/3 2B S AN S w itc h P o w er Suppl y/F an Assembl y Unit Read this sect ion f or P ow er Suppl y/F an Assembl y Unit replacemen t procedur es.
CA UTION: Disassemblin g an y part of the fan assembly vo ids the part warr a nty and regulatory certifi c atio ns. Ther e are no u ser-serviceable ports insi de the P ow er Supply/F an Assembly Unit.
LED name LED color and beha vi or Descripti on Action requir ed failur e, a fan f ailur e , or one or m ore e nvi ro n me n ta l ra n g es h a s e xceeded .
Items r equir ed R eplac ing a 4/3 2B SAN S wit ch P ow er Suppl y/F an Assembly Uni t tak es appr ox imately two min utes , and requir es the follo w ing items: • 4/3 2B S AN Sw i tch • Ne w P ow.
7. Insta ll the new P ow e r Supply/Fan Asse mbly Unit in th e chassis : a. O rie n t th e P owe r Su p p ly / Fan A s se m b ly U ni t a s s hown i n Fi g u re 38 ,w i t ht h e c a p t i v es c r e w o nt h er i g h t . 25276a Fig ure 38 In serti ng the P ow er Suppl y/F an Assembl y Unit i n the 4/3 2B SAN S witc h b.
CA UTION: If the SFP y ou does not ha v e a bale , use a small impl emen t , such as a s cre wd ri ve r , to p re s s a n d re l e a s e t h e t rig g e r b e n e a t h t h e p o r t. N o n - b a l e d SFP s can b e damaged by t he remo val pr ocess a nd ar e not recommended.
IOIOI ! scale: 1/2" = 1" IOIOI ! A B 1 2 MRO25020a 1. Bale 2. S F P Figu re 3 9 Ins talling t he S FP 112 Inst alling f ield-r eplaceable unit s.
A Regula tor y com p lian ce an d saf ety R egulator y compli ance F ederal C ommun i cations Commission noti ce for Class A equipment This equipment has been tes ted and found to compl y w ith the limits for a C lass A digital dev ice , pursuant to P ar t 15 of the FC C Rules .
Modif icati ons The F CC requ ires the user to be notif ied that an y changes or modifi cations made to this dev ice that ar e not expr essly appr ov ed by He wlett-P ack ar d Compan y m y vo id the user ’s authority to operate the equipment .
Cer ti ficat ion an d cl as si fic at io n in fo rm at io n Thi s product cont ains a laser internal to the f iber optic (F O) transce i ver f or connecti on to the F ibre Channel communi cations port .
Eu ro p e a n U n i o n n o t i c e Pr oducts bear ing t he CE M ar king comply w ith both the EMC Dir ecti ve (8 9/3 36/EE C) and the L ow V olta ge D i r e c t i v e( 7 3 / 2 3 / E E C )i s s u e db.
Japanes e notice Ko r e a n n o t i c e s S A N S witc h installation guide 11 7.
Safet y Batter y r ep lacement notice Y our s w itch is eq uipped with a lithium manganese di ox ide, a v anadium pento x ide , or an alkali ne internal battery or battery pack. Ther e is a danger of explosi on and risk of personal inj ur y if the battery is inc or r ectly r eplaced or m istr eated.
T ai wan batte r y r ecy cling noti ce The T ai wan EP A req uir es dry ba ttery manufac tur ing or importing firms in accor dance w ith Artic le 15 of the W aste Disposal A ct to indi cate the r e co very m ar ks on the batteri es used in s ales, gi vaw ay , or promoti on.
Wa s t e E l e c t r i c a l a n d El ect r o nic E qui pm ent d ir ect i v e English notice Disposal of w aste equipment b y users in pri vate households in the Eur opean Union This s ymbol on the pr oduct or on its pac k aging indicate s that this pr oduct must not be disposed o f with y our other household w ast e.
Cz echo slo vaki an noti ce Likvidace z a ř í z e n ís o u k r o m ý m id o m á c í m iu ž i v a t e l ivE v r o p s k éu n i i T ento s ymbol na pr odu ktu nebo balení ozna č uje výr obek, kte rý nesmí být v yhoz en spolu s os tatním domácím odpadem.
Fi n n i s h n o t i c e Laitteiden hävittäminen kotitalouksissa Eur oopan unionin alueella Jos tuottee ssa tai s en pakk auksessa on tämä mer kki, tuotetta e i saa häv ittää k otitalousjättei den muk ana. Tällöin hä v itet tävä laite on toimitetta va sähkölaittei den ja elektr onist en lait teiden kierrä tyspisteese en.
Ger man noti ce Entsor gung von Altgeräten aus pri vaten Haushalten in der EU Das S ym bol auf dem Pr odukt oder seiner V erpac kung w eist dar auf hin, dass das Pr odukt ni c ht über den normalen Hausmüll entsor gt wer den dar f .
Hu n ga rian n ot ice Készülék ek magánháztar tásban történ ő selejtezése az Európai Unió területén A kés züléke n, illetv e a kés zülék csomagolásán látható a z onos s zimbólum annak jelzésér e s z olgál, hog y a kés zülék a selej tezés során a z egyéb háztartási hulladéktól eltér ő módon ke zel e n d ő .
La t vian n o tic e Nolietotu iek ā rtu i zn ī cin ā šanas noteikumi lietot ā jiem Eiropas Savien ī bas pr iv ā taj ā s m ā jsaimniec ī b ā s Š ā ds simbols u z i zstr ā d ā ju m a vai u z t ā ie sai ņ oju ma n or ā da , ka šo i zstr ā d ā ju mu nedr ī k s ti z m e s tk o p ā ar c itiem sadz ī ve s atkritumiem .
Po l i s h n o t i c e Po z b y w a n i e s i ę zu ż ytego spr z ę tu przez u ż ytk owników w pr ywatn ych gospodarst wach domo wych w Unii Eu rop ejskiej T en s ymbol na pr oduk c ie lub j ego opak ow aniu oznacz a, ż ep r o d u k t un i ew o l n o wy rzuc a ć do z wyk ł ych p oj em n i kó w n a ś miec i .
S l ova ki a n no t i ce Likvidácia vyradených zariadení v domácnostiac h v Európskej únii S ymbol na výrobk u alebo jeho balení ozna č uje , že daný výr obok sa nesmie likvidova ť s domo vým odpadom.
Sp an is h n ot ice Eliminación d e residuos de equipos eléc tricos y electró nicos por parte de us uarios partic ulares en la Unión Europea E ste símbolo en el pr oducto o en su en vase indi ca que no debe eliminarse junt o con los desper dic ios gener ales de la c as a.
B E lect r ost ati c di sc ha rge Thi s appendix pr ov ides the f ollo wing inf ormati on: • Ho w to pr ev ent electr ostati c dischar ge • Gr ounding methods Ho w to pr e v ent electr ost atic dis c har ge T o pre vent damage to the sy stem, y ou must follo w cer tain pr ecautions when setting up the s ys tem or handling par ts .
If y ou do not hav e any o f the suggested equipment f or proper gr ounding, ha ve an HP author i z ed rese ller install the part. NO TE: F or mor e i nf ormati on on static electr icity , or f or assistance with pr oduct installation , cont act y our HP aut hor i z ed r esell er .
C S AN S witc h tec hnical spe c i f icat io ns Thi s appendix pr ov ides the f ollo wing inf ormati on: • Gener al spec ifi c ati ons • W ei ght and phy sical dimensi ons •F a c i l i t y r e q.
Gener al spec if icati ons Ta b l e 2 2 lists gener al specif ications for the S AN Sw itches . T a ble 2 2 General spec ifications Specification Description Conf igura ble por t types F _ Po r t , F .
Specificatio n Descripti on S ystem pr ocessor for the 4/3 2B SAN S w itch Po w e r P C 4 4 0 G P , 3 3 3 M H z C P U ANS I prot ocol FC-PH (FC Ph y sical and Si gnalling Interf ace standar d) Modes o.
W e igh t and ph y sical dimensi ons Ta b l e 23 l i s t sp h y s i c a lp r o p e r t i e sf o rt h eS A N S w i t c h e s . T able 23 S AN S wi tch ph y sic al di mens ions 4/8 and 4/16 SAN Swi tc h es 4/3 2 SAN S witch 4/64 SAN Switch 4/3 2B SAN S witc h Hei ght 4.
Ty p e Requirements 4/64 S AN S w itc h: Cabine t space of 2 U in a EIA 1 9 in cabin et. All equipment in the cabinet gr ounded through a r eliable branc h c irc uit connection. Additional w eight o f the sw i tc h must not e xceed the cabinet’s w eight limit.
E n vi ro n m e n t a l re q u i re m e n t s T o ensur e proper oper a tio n, the s wi tch mus t not be subjected to en v ir onmental conditions be yo nd tho se f or whic h it wa s tested . T he ranges s pec if ied in Ta b l e 2 5 list the acceptable env ironment f or both operati ng and non-operating conditi ons.
Data tr ansmissi on r anges See T able 2 6 and Ta b l e 27 for S AN Sw itch dat a transmis si on range s for the diff erent cable types and port speeds.
T able 2 7 Laser data t ran smi ssio n ra nges f or the 4/3 2 SAN S wit ch P ort speed Cable siz e (microns) Short wa velength Long wav elength Extended long wa ve length 50 500 m (1,640 ft) 10 km (6 .2 miles) N/A 62. 5 30 0 m (984 ft ) 10 km (6 .2 miles) N/A 1G b / s 9 N/A 10 km (6.
T able 28 L aser data t ra nsmi ssi on ra nges f or the 4/ 6 4 SA N S wi tch P ort speed Cable size (microns) S hor t wavel eng th Lon g wavel en gt h Extended long wa ve length 50 50 0 m (1 ,6 40 f t ) 10 km (6.2 miles) N/A 62. 5 30 0 m (984 ft ) 10 km (6.
T able 2 9 Laser data t rans miss ion r anges f or the 4/3 2B S AN S wit ch P ort speed Cable siz e (microns) Sh or t wavel engt h Lon g wavel en gt h Extended long wa ve length 50 50 0 m ( 1,6 40 f t ) N / A N / A 62. 5 30 0 m (984 ft ) N /A N/ A 1G b / s 9 N/A 10 km (6.
Additi onally , the por ts autonegoti ate at 1, 2 , or 4 G b/s and meet all r equir ed safety standar ds. F or mor e infor mation about these s tandar ds, see R egulatory compliance notices . 4/3 2B S AN S wit ch FC port spec if icati ons The FC ports ar e compatible w ith S WL, L WL, and EL W L SFP tr anscei v ers.
T able 30 Cabling pi nouts Pi n Signal Descr iption 1 Not supported Not supported 2 RxData Rec eive d at a 3 TxData T r ansmit data 4 Not supported Not supported 5 GND Log ic g rou n d 6 Not supported Not supported 7 Not supported Not supported 8 Not supported Not supported 9 Not supported Not supported A 3 .
P o w er suppl y spec ifi cations The po wer supplies ar e univ ersal and capable of functi oning wor ldw ide w ithout using v oltage jumpers or s wit ches . The y me et IE C 6 1000-4-5 surge v oltage requir ements and ar e autor anging in terms of accommodating in put volt ages and line fr equenc ies .
Memor y Ta b l e 32 specif ies 4/8 and 4/16 S AN Sw itch memory . T a ble 32 4/8 and 4 /1 6 SAN S witc h mem ory s pec ificatio ns Mem ory ty pe Install memor y Main Memory (S DR AM) 12 8 M B Compact Flash 256 M B Ta b l e 3 3 specif ies 4/ 3 2 and 4 /64 SAN S witch memo ry .
Supported HB As Fo r a l i s t o f H BA s t h at hav e been tested and ar e know n to wor k w ith the S AN sw itches , ref er to th e latest version of th e HP Sto r ag e W orks SAN de sign reference g uide : h ttp:/ /ww w . hp .com/ go/sand esignguide .
14 6 S AN S witc h techni cal spe c ifi cations.
Gl o ssa ry This glos sar y def ines terms us ed in this g uide or r ela ted to this pr od uct . It is not a compr ehensiv e glossar y of computer t erms. alias ser ver A fabri c softwar e fac ility that suppor ts multi cast gr oup managemen t . API Appli cation pr ogramming inte rface .
CRC C y cli c r edundancy chec k. A chec k f or tr ansmissi on err ors that is inc luded in ev ery data fr ame . defined zone con - figuration The s et of all z one objec ts def ined in the fabr ic. May i n c l u d em u l t i p l ez o n ec o n f i g u r a t i o n s .
fabric An FC networ k containing t w o or more s witc hes in addition to hosts and de vice s. Ma y also be called a swi t ch ed f ab ric . fabric name The unique i dentif ier assi gned to a fa bri c and communicated dur ing login and port discov er y .
FSP F F abr ic shortest path fir st . HP routing pr otocol for FC s witc hes. Fx_P ort Af a b r i cp o r tt h a tc a no p e r a t ea sa nF _ P o r to rF L _ P o r t .
LIP Loop initiali z ation pri mitiv e. The si gnal that begins initiali z ation in a loop. It indicate s either loop failur e or the res etting of an o d e . LM_T OV L oop maste r time-out v alue . The minimum time that the loop master w aits for a loop initiali z ation sequence to r eturn .
non-participating mode A mode in whic h an L_P ort in a loop is inacti ve and cannot arb itr ate or send f r ames, but can r etransmit an y rece i ved tr ansmissions . This mode is entered if the re ar e more than 12 7 dev ices in a loop and an AL_P A cannot be acquired .
public loop An arbitr ated loop that includes a partic ipating FL_P or t and may cont ain both publi c and pri vate NL_P orts. See also arb itrat ed loop . public NL_P ort A n NL_P or t that log s in to the fa bri c , can functi on w ithin a public or pr iv ate loop, and can communi cate with pr i vat e or public NL_P or ts.
them as r equired to other de vi c es in the f abri c. May also be r efer red to as a dir ectory servi ce . swit ch H a rdw a re th a t ro u t es f ra m es a c c o rd i n g to F C p ro t o c ol a n d i s contr olled by softwar e. swit ch p or t A por t on a s w itch .
z o n e ,b u ta r en o tv i s i b l et oa n yo u t s i d et h ez o n e . See a lso def ined z one c onf igur a tion , enabled z one conf igurati on . zone configuration A spec if ied set o f z ones. Enabling a conf igur ation enable s all z ones in t hat conf igu r ati on.
15 6 Glossary.
In de x A acti vating 4/16 por ts ,1 7 acti vating 4/3 2 ports ,2 2 acti vating 4/3 2B por ts ,3 1 audience ,1 1 author i z ed rese ller ,1 4 B boot spec ifi cations ,8 8 C cable management ,5 2 cable.
doc ument conv entions ,1 2 r elated doc umentatio n ,1 1 E electr ical consider ations ,3 8 env ironment al consider ations ,3 8 env ironmental r equirements ,1 3 6 err sho w c ommand ,8 9 Ethernet c.
portstart command , 18, 2 3 POST res u lt s, i n te rpre t in g ,8 8 POST spe cific at ion s ,8 8 po we r supply s pec ifi cations ,1 4 3 po we r supply , replac ing , 9 3, 10 0 po we ri ng on and off.
Ein wichtiger Punkt beim Kauf des Geräts HP AA-RWF3A-TE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP AA-RWF3A-TE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP AA-RWF3A-TE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP AA-RWF3A-TE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP AA-RWF3A-TE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP AA-RWF3A-TE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP AA-RWF3A-TE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP AA-RWF3A-TE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP AA-RWF3A-TE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
