Benutzeranleitung / Produktwartung 2209T des Produzenten HP
Zur Seite of 25
USER'S MANUAL L2105tm / 2209t LCD Touch Monitors Agency no.: HSTND-2791-Q.
Copyright © 2009 - 201 1 Hewlett-Packard Development Company, L.P. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, tr.
Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing EquipmentRegulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérielbrouilleur du Canada.
Product Environmental Notices Materials Disposal This HP product contains mercury in the fluorescent lamp in the display LCD that mig ht require special handling at end-of-life. Disposal of this material can be regulated because of environmental considerations.
1 Table of Contents Safety Inst ructions ............................................................................................................ ... 2 Recycling In formation ........................................................................
2 Safety Instructions Please keep the display away from any heat sources such as electric radi ators or direct sunlight. Place the display in a stable and well-ventilated place. The holes or openings on the display are designed for ventilation.
3 Recycling Information HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, go to http://www.
4 System components and accessories Use the provided stylus as a touch pointing device. However, the stylus is not required for optical touch applications; for example, finger and other pointing instruments may be used. If any component is missing, please contact your local dealer for technical support or customer service.
5 Connection instructions Installing the display Install: Remove: Place the display on the table (Figure 1) Packaging procedures If you need to package the display again, please keep the original carton and packing materials. The procedures for re-packaging the display are as follows: 1.
6 Connection instructions CAUTION: Before installation, please make sure to power off the display and the computer. (Figure 3) ○ 1 Power cord Connect one end of the power cord into the AC power connector on the rear of the display, and the other end to an electrica l wall outlet.
7 Using the display Turning on the display Turn on the display before turning on the computer. When the power is on, the LED on the power button lights blue and the screen image will appear after about 10 seco nds. If the LED doesn't light blue or no image appears, please verify if the display is properly connected.
8 Operating the Touch Screen Touch Software Installation for Microsoft Window s 7 and Window s Vista (Plug and Play) Windows touch and multi-touch gestures are supported in Microsoft Windows 7 Home Premium, Professional, Enterprise, and Ultimate Operating System Editions only.
9 Installing the Touch Driver from the CD (for Windows XP only) Insert the CD-ROM into the computer CD-ROM drive. The CD menu is displayed (or open Windows Explorer and run the Touch_Driver_Setup.exe from the CD). 1. Click “ Install Touch Driver for Microsoft Windows XP ” from the CD menu.
10 3. Click “Finish” The driver setup installation is complete. 4. Click “Yes” After clicking Finish, the setup wizard will prompt you to reboot the computer. Once the system is restarted, the installation is complete . Installing the Touch Driver from the Internet (for Windows XP only) To install the touch driver from the Internet: 1.
11 Control of the Touch Function NOTE: 1. Before using the touch function, make sure the USB cable is connected, the touch applications from the CD are installed (if you are running Windows XP) and the Window's operating system is started.
12 Using the Extended Display Setup Microsoft Windows 7 Operating Systems (Home Premium, Professional, Enterprise and Ultimate Editions) support extended display touch screen functions for two monitors connecte d to one system. 1. Make sure a USB cable is connected from the computer to each monitor.
13 5. Click on the Calibrate… button. Perform a calibration on each monitor separately. NOTE: If you have two monitors that are the same model, be sure to note which model is calibrated first, as both will appear with identical names. Microsoft Windows XP and Windows Vista do not support extended display touch functionality.
14 OSD selection Press the Menu button to activate the OSD function menu and continue pressing the Menu button to select an option from the 7 functions in the menu. Select the function you want to adjust on the OSD function menu and then press MENU to make adjustment.
15 OSD CONTROL H.OSD POSITION: Controls the OSD menu’s horizontal position. V.OSD POSITION: Controls the OSD menu’s vertical position. OSD TIMEOUT: Determines how long (in seconds) the OSD menu waits before closing automat ically after no action has been performed.
16 Troubleshooting Problems Possible solutions Power LED doesn't light up. Check if the power switch is in the ON position Make sure the power cord is properly connected No screen image .
17 Touch Screen Troubleshooting Tips Problems Possible Solutions Computer does not recover from sleep mode when the touch screen is touched Sleep mode recovery is not supported by the touch screen. Use the keyboard or mouse to recover from the computer ‘s sleep mode.
18 Production Specifications LCD panel size 54.61 cm(21.5in) DCR 3000:1 (typical) Viewing angle Horizontal 170°, vertical 160° (typical) Response time 5 ms (typical) Brightness 265 cd/m 2 (typical) Input signal Analog signal (D-sub); digital signal ( DVI) Display color 16.
19 Preset Modes Preset Pixel Horz Freq (kHz) Horz Polarity Vert Freq (Hz) Vert Polarity Pixel Clk (MHz) Source 1 640 x 480 31.469 - 59.940 - 25.175 VGA 2 720 x 400 31.469 - 70.087 + 28.322 VGA 3 800 x 600 37.879 + 60.317 + 40.000 VESA 4 1024 x 768 48.
20 Appendix Connector pin assignment 15 pin color display signal cable: PIN No. Description PIN No. Description 1. Red 9. +5V 2. Green 10. Logic ground 3. Blue 11. Monitor ground 4. Monitor ground 12. DDC-serial data 5. DDC-return 13. H-sync 6. R-ground 14.
Ein wichtiger Punkt beim Kauf des Geräts HP 2209T (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP 2209T noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP 2209T - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP 2209T reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP 2209T erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP 2209T besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP 2209T verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP 2209T. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP 2209T gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
