Benutzeranleitung / Produktwartung ZE4 Series des Produzenten HP (Hewlett-Packard)
Zur Seite of 122
HP Notebook PC Reference Guide.
Thank you for purchasing this Factory Service Manual CD/DVD from servicemanuals4u.com. Please check out our eBay auctions for more great deals on Factory Service Manuals: servicemanuals4u.
ii Reference Guide Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Reference Guide iii Important Safety Information CAUTION To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord to connect a modem to the telephone wall jack. In Australia, the computer must be connected to the Telecommunication Network through a line cord that meets the requirements of ACA Technical Standard TS008.
iv Reference Guide HP Software Product License Agreement Your HP product contains software programs. CAREFULLY READ THIS LICENSE AGREEMENT BEFORE PROCEEDING TO OPERATE THIS EQUIPMENT. RIGHTS IN THE SOFTWARE ARE OFFERED ONLY ON THE CONDITION THAT THE CUSTOMER AGREES TO ALL TERMS AND CONDITIONS OF THE LICENSE AGREEMENT.
Reference Guide v OWNERSHIP. Customer agrees that he/she does not have any title or ownership of the software, other than ownership of the physical media. Customer acknowledges and agrees that the software is copyrighted and protected under the copyright laws.
vi Reference Guide U.S. GOVERNMENT RESTRICTED RIGHTS. Use, duplication, or disclosure is subject to HP standard commercial license terms and for non-DOD Departments and Agencies of the U.S. Government, the restrictions set forth in FAR 52.227-19(c)(1-2) (June 1987) Hewlett-Packard Company, 3000 Hanover Street, Palo Alto, CA 94304 U.
Reference Guide vii Contents Getting Started with Your Notebook ....................................................................... 1 Identifying Parts of the Notebook .......................................................................... 2 Front panel and right panel components.
viii Reference Guide Taking Care of Your Notebook ............................................................................ 27 To protect your hard drive ..............................................................................27 To maintain your notebook.
Reference Guide ix Replacing the Hard Drive ..................................................................................... 62 To replace the hard drive ................................................................................62 To replace the hard drive holder .
x Reference Guide Regulatory Information ...................................................................................... 101 U.S.A. ........................................................................................................... 101 Canada .
Reference Guide 1 Getting Started with Your Notebook.
Getting Started with Your Notebook Identifying Parts of the Notebook 2 Reference Guide Identifying Parts of the Notebook Components included with the notebook vary by geographical region and features selected. The following illustrations identify the standard external components included with most notebook models.
Getting Started with Your Notebook Identifying Parts of the Notebook Reference Guide 3 1 Notebook open/close latch 2 One-Touch buttons 3 Keyboard status lights 4 Power button: turns the notebook on an.
Getting Started with Your Notebook Identifying Parts of the Notebook 4 Reference Guide Left panel and back panel components 1 AC adapter jack 2 Universal serial bus ports (USB) 3 RJ-45 jack: connects .
Getting Started with Your Notebook Identifying Parts of the Notebook Reference Guide 5 1 AC adapter jack 2 Two USB ports 3 RJ-45 network jack: connects a network cable 4 PS/2 port 5 Parallel port (LPT.
Getting Started with Your Notebook Identifying Parts of the Notebook 6 Reference Guide Bottom panel components 1 Hard drive 2 Battery latch 3 RAM (memory) cover 4 Reset button 5 Docking port (select m.
Getting Started with Your Notebook Identifying Parts of the Notebook Reference Guide 7 1 Hard drive 2 Battery latch 3 Mini PCI cover (no user parts inside) 4 RAM (memory) cover 5 Docking port (select .
Getting Started with Your Notebook Identifying Parts of the Notebook 8 Reference Guide Status lights The notebook includes a number of status lights that report power and battery status, drive activity, and keyboard functions such as Caps Lock and Num Lock.
Getting Started with Your Notebook Identifying Parts of the Notebook Reference Guide 9 The keyboard status lights, located above the keyboard, indicate the states of the keyboard locks. 1 Caps Lock On. Caps Lock is active. 2N u m L o c k O n . Num Lock is active.
Getting Started with Your Notebook Setting Up Your Notebook 10 Reference Guide Setting Up Your Notebook WARNING Improper use of keyboards and other input devices has been associated with ergonomic injury.
Getting Started with Your Notebook Setting Up Your Notebook Reference Guide 11 Step 2: Connect AC power CAUTION Use only the AC adapter included with your notebook (or other approved adapter that meets the power requirements of the notebook).
Getting Started with Your Notebook Setting Up Your Notebook 12 Reference Guide Step 3: Connect a phone line 1. Make sure the telephone line is an analog line, sometimes called a data line. (Do not use a digital line.) 2. Connect the telephone cord (RJ-11) into a telephone jack.
Getting Started with Your Notebook Setting Up Your Notebook Reference Guide 13 Step 4: Turn on the notebook Press the power button above the left side of the keyboard. The notebook boots up and Windows starts automatically. Hint If your notebook does not turn on when operating on battery power, the battery may be out of power.
Reference Guide 15 Basic Operation.
Basic Operation Operating Your Notebook 16 Reference Guide Operating Your Notebook You can start and stop your notebook using its power button. However, at certain times you may want to use other methods to start or stop the notebook—depending on power considerations, types of active connections, and startup time.
Basic Operation Operating Your Notebook Reference Guide 17 To reset the notebook Occasionally, you may find that Windows or the notebook has stopped responding and will not let you turn the notebook off. If this happens, try the following procedures in this order: • If possible, shut down Windows.
Basic Operation Operating Your Notebook 18 Reference Guide To use the TouchPad The TouchPad includes an on-off button so you can turn off the TouchPad to avoid moving the pointer accidentally, such as by touching the pad while typing. The indicator light turns off when you turn off the TouchPad.
Basic Operation Operating Your Notebook Reference Guide 19 To use the function hot keys The combination of the Fn key plus another key creates a hot key —a shortcut key sequence—for various system controls. To use a hot key, press and hold Fn, press the appropriate second key, then release both keys.
Basic Operation Operating Your Notebook 20 Reference Guide To use the One-Touch buttons Your notebook includes five One-Touch buttons that can start any application or open a document or Web site with a single press. Press a One-Touch button to open the corresponding application, document, or Web site.
Basic Operation Operating Your Notebook Reference Guide 21 To use the Windows and Applications keys The Windows key brings up the Windows Start menu. This is the same as selecting the Start button on the taskbar. The Applications key brings up the shortcut menu for the selected item.
Basic Operation Using CDs or DVDs 22 Reference Guide Using CDs or DVDs To insert or remove a CD or DVD CAUTION Do not remove a CD or DVD while the notebook is reading it. Otherwise, the notebook could stop responding and you could lose data. Press the CD or DVD gently, but firmly, onto the spindle to avoid damage to t h ed i s ko rd r i v e .
Basic Operation Using CDs or DVDs Reference Guide 23 To play DVD movies If your notebook is equipped with a DVD or other DVD readable drive, it also includes a DVD player software that lets you play DVD movies. Select Start > All Programs > Multimedia > DVD Player > InterVideo WinDVD.
Basic Operation Securing Your Notebook 24 Reference Guide Securing Your Notebook To set up password protection You can protect your notebook from access by another user when you set up password protection, which is available through Windows and through the BIOS Setup utility.
Basic Operation Securing Your Notebook Reference Guide 25 To attach a security cable Your notebook includes a built-in connector to secure the notebook with a cable and a lock (such as the Kensington MicroSaver lock system, available at many computer stores).
Basic Operation Securing Your Notebook 26 Reference Guide To lock the hard drive The notebook enables you to lock its internal hard drive to help keep your information secure. Hard drive lock does not protect a second hard drive installed in the module bay.
Basic Operation Taking Care of Your Notebook Reference Guide 27 Taking Care of Your Notebook Use the following recommendations to maintain your notebook during everyday use and prevent potential physical damage or data loss.
Basic Operation Taking Care of Your Notebook 28 Reference Guide To safeguard your data • Do not use a pointing device or activate any other device that interrupts operation while the system is starting or stopping. • Back up your work regularly. Copy files to diskettes, CDs, DVDs, and other media or network drives.
Reference Guide 29 Batteries and Power Management.
Batteries and Power Management Managing Power Consumption 30 Reference Guide Managing Power Consumption When you are running your notebook on battery power, you can maximize operating time without compromising performance. Your notebook is designed to help you reduce power consumption and extend battery life.
Batteries and Power Management Managing Power Consumption Reference Guide 31 The notebook can also enter Hibernation if battery power reaches a critically low level. If this happens, you will find on resuming that all your data has been saved, but some functions may be disabled.
Batteries and Power Management Using Battery Power 32 Reference Guide Using Battery Power To check battery status From the battery status light Check your notebook battery status light. From the Windows taskbar The Windows taskbar can display a power icon that provides detailed battery status information (see Windows Help for details).
Batteries and Power Management Using Battery Power Reference Guide 33 To respond to a low-battery warning The notebook automatically alerts you when the battery power drops to a critically low level. The notebook first emits a high-pitched beep or displays a warning message.
Batteries and Power Management Using Battery Power 34 Reference Guide To get the most from your batteries Follow these suggestions to make your battery power last as long as possible: • Plug in the AC adapter, especially when using a CD-ROM or DVD drive, or any external connections such as a PC Card or a modem.
Reference Guide 35 Modem and Network Connections.
Modem and Network Connections Using the Modem 36 Reference Guide Using the Modem You can connect your modem to a telephone line and communicate with other computers throughout the world. You can explore the Internet, send and receive e-mail messages, and use your notebook to send and receive faxes.
Modem and Network Connections Using the Modem Reference Guide 37 To connect the modem CAUTION Your built-in modem may not work with multiple phone lines or a private branch exchange (PBX), cannot be connected to a coin-operated telephone, and does not work with party lines.
Modem and Network Connections Using the Modem 38 Reference Guide To change your modem settings The modem is already set up to be compatible with telephone systems and modems in most areas. However, in some situations, you may have to change modem settings to match local conditions.
Modem and Network Connections Connecting to a Local Area Network (LAN) Reference Guide 39 Connecting to a Local Area Network (LAN) LANs give you access to network resources, such as printers and file servers on your corporate network, and possibly to the Internet.
Modem and Network Connections Making Wireless Network Connections (select models only) 40 Reference Guide Making Wireless Network Connections (select models only) If your notebook includes a wireless on-off button, you can connect by radio to an 802.11 wireless local area network (LAN) and access computers and other resources on the network.
Modem and Network Connections Making Wireless Network Connections (select models only) Reference Guide 41 2. A list of available networks appears. Select the network you want, enter the encryption key if required, then select Connect.
Modem and Network Connections Making Wireless Network Connections (select models only) 42 Reference Guide 5. If you want to use encrypted communication, uncheck the automatic key option, then select t.
Modem and Network Connections Making Wireless Network Connections (select models only) Reference Guide 43 Turning off communication and ending a connection 1. Important: close any files that reside on other network computers. 2. To turn off the wireless 802.
Modem and Network Connections Making Wireless Bluetooth Connections (select models only) 44 Reference Guide Making Wireless Bluetooth Connections (select models only) If your notebook includes Bluetoo.
Modem and Network Connections Making Wireless Bluetooth Connections (select models only) Reference Guide 45 Turning off Bluetooth communication Turning off communication ends any connection you have open. 1. Important: close any files that reside on other network computers.
Modem and Network Connections Making Wireless Bluetooth Connections (select models only) 46 Reference Guide To create your business card, you can open Microsoft Outlook, then open the address book and create a new contact. After entering your personal information, select File, Export To vCard File and store the file in your business card directory.
Reference Guide 47 Add-On Devices.
Add-On Devices Connecting PC Cards 48 Reference Guide Connecting PC Cards The notebook PC Card slot is available for storing data and expanding the communication capabilities of the notebook. The notebook supports standard Type II and III PC Cards (PCMCIA and CardBus).
Add-On Devices Connecting PC Cards Reference Guide 49 Removing a PC Card CAUTION Before removing a PC Card, you must use the Eject Hardware or Safely Remove Hardware icon in the taskbar, or shut down the notebook.
Add-On Devices Connecting External Devices 50 Reference Guide Connecting External Devices To connect an audio device You can plug in an external microphone, external speakers, or headphones.
Add-On Devices Connecting External Devices Reference Guide 51 1 Audio out (headphones) connector (green) 2 External microphone connector (pink) Note When you plug a device into the headphone port, the built-in speakers automatically turn off.
Add-On Devices Connecting External Devices 52 Reference Guide To use an external monitor Connecting an external monitor 1. Plug a standard 4-pin S-Video cable to the S-Video out jack on your notebook (yellow connector on the back panel) to the S-Video in jack on your television.
Add-On Devices Connecting External Devices Reference Guide 53 Adjusting monitor resolution and other settings 1. Select Start > Control Panel > Appearance and Themes > Display. 2. On the Settings tab, adjust the Screen area. Other settings are also available.
Add-On Devices Connecting External Devices 54 Reference Guide The IEEE 1394 port is a 4-wire port. If you want to connect a device that has a 6-wire plug, you can purchase a simple adapter if the device is unpowered, or a hub if the device requires power.
Add-On Devices Connecting External Devices Reference Guide 55 To use a port replicator (select models only) A port replicator provides your notebook with external connections that you can leave in place whenever you remove the notebook from your desk.
Add-On Devices Connecting External Devices 56 Reference Guide To dock to the port replicator 1. Plug in the AC adapter, then connect it to the back of the port replicator. You can also operate the port replicator using power from the notebook battery.
Add-On Devices Connecting External Devices Reference Guide 57 To undock from the port replicator 1. Press down the undock button on the right side of the port replicator.
Add-On Devices Installing Additional RAM (Memory) 58 Reference Guide Installing Additional RAM (Memory) The notebook has two slots that hold two RAM modules. At least one slot contains a RAM module installed at the factory. You can use both slots to expand your RAM.
Add-On Devices Installing Additional RAM (Memory) Reference Guide 59 4. Insert the RAM board into the connector at about a 30 degree angle until it is fully inserted. Then press down at both sides until both latches snap closed. Match your notebook to one of the following illustrations.
Add-On Devices Installing Additional RAM (Memory) 60 Reference Guide To remove a RAM expansion module You may want to remove a RAM module so you can install a larger one.
Add-On Devices Installing Additional RAM (Memory) Reference Guide 61 4. Release the two latches at the sides of the RAM board, so the free edge of the board pops up. Match your notebook to one of the following illustrations. 5. Pull the board out of the connector.
Add-On Devices Replacing the Hard Drive 62 Reference Guide Replacing the Hard Drive To replace the hard drive You will need a small Phillips screwdriver for this procedure. 1. Unplug the AC adapter, if connected. 2. Remove the battery. 3. Turn the unit bottom side up.
Add-On Devices Replacing the Hard Drive Reference Guide 63 To replace the hard drive holder If you are installing a new hard drive that does not have a holder, you can remove the holder parts from the old hard drive. You will need a small Phillips screwdriver for this procedure.
Add-On Devices Replacing the Hard Drive 64 Reference Guide To prepare a new hard drive When you install a new hard drive, you also need to prepare it to be able to work with your notebook.
Reference Guide 65 Troubleshooting and Maintenance.
Troubleshooting and Maintenance Troubleshooting Your Notebook 66 Reference Guide Troubleshooting Your Notebook This chapter contains solutions to many types of problems you might have with your notebook. Try the solutions one at a time, in the order in which they are presented.
Troubleshooting and Maintenance Troubleshooting Your Notebook Reference Guide 67 If you hear loud, high-pitched feedback from the speakers • In the Volume Control, try reducing the Master volume by selecting the speaker icon in the taskbar.
Troubleshooting and Maintenance Troubleshooting Your Notebook 68 Reference Guide • Restart the system. Remove the disc from the drive, then select Start > Turn Off Computer > Restart. • If you created the CD on a CD/DVD RW combo drive, try using a different media brand.
Troubleshooting and Maintenance Troubleshooting Your Notebook Reference Guide 69 If an external display does not work • Check the connections. • The external monitor may not be detected. In the BIOS Setup utility, try setting Video Display Device to Both in the System Devices menu.
Troubleshooting and Maintenance Troubleshooting Your Notebook 70 Reference Guide Heat problems Your notebook normally gets warm during routine operation. If the notebook gets abnormally hot • Always set the notebook on a flat surface, so that air can flow freely around and underneath it.
Troubleshooting and Maintenance Troubleshooting Your Notebook Reference Guide 71 Keyboard and pointing device problems Use these suggestions for built-in or external devices. If the pointer is difficult to control Adjust the pointer controls. Select Start > Control Panel > Printers and Other Hardware > Mouse.
Troubleshooting and Maintenance Troubleshooting Your Notebook 72 Reference Guide Local area network (LAN) problems If the built-in network adapter doesn’t connect to the LAN • Check all cables and connections. Try connecting at a different network station, if available.
Troubleshooting and Maintenance Troubleshooting Your Notebook Reference Guide 73 Memory problems If a message says you are out of memory • Make sure drive C is not running low on free space.
Troubleshooting and Maintenance Troubleshooting Your Notebook 74 Reference Guide If the modem doesn’t dial or no dial tone is detected • Check all cables and connections. • Connect a standard telephone to the phone line and make sure the line is working.
Troubleshooting and Maintenance Troubleshooting Your Notebook Reference Guide 75 • Open the hardware Device Manager: select Start > Control Panel > Performance and Maintenance > System. If the modem is disabled, try to enable it. If it has a conflict, try disabling another device.
Troubleshooting and Maintenance Troubleshooting Your Notebook 76 Reference Guide PC Card problems If the notebook doesn’t recognize a PC Card • Remove and reinsert the PC Card. • Restart the notebook: select Start > Turn Off Computer > Restart.
Troubleshooting and Maintenance Troubleshooting Your Notebook Reference Guide 77 • Press CTRL+ALT+DEL and use Task Manager to see if an application is not responding.
Troubleshooting and Maintenance Troubleshooting Your Notebook 78 Reference Guide If the battery doesn’t charge • Make sure the AC adapter is fully plugged into the power source and the notebook, and that the light on the Adapter is on.
Troubleshooting and Maintenance Troubleshooting Your Notebook Reference Guide 79 If the notebook doesn’t enter Standby as expected • If you have a connection to another computer, the notebook won ’ t enter Standby if the connection is active.
Troubleshooting and Maintenance Troubleshooting Your Notebook 80 Reference Guide Serial, parallel, and USB problems If a serial mouse doesn’t work • Make sure you followed the manufacturer ’ s installation instructions completely and have installed the mouse properly.
Troubleshooting and Maintenance Troubleshooting Your Notebook Reference Guide 81 If the USB port is not working • Contact the vendor of the peripheral device for the latest USB drivers. • Check the port settings in Control Panel. Open the hardware Device Manager, then select Universal Serial Bus Controller.
Troubleshooting and Maintenance Troubleshooting Your Notebook 82 Reference Guide If the notebook takes a long time to resume after entering Standby The notebook can routinely take a minute or more to resume if it has a network card installed.
Troubleshooting and Maintenance Troubleshooting Your Notebook Reference Guide 83 If you can connect, but the network is slow • Check whether you might be in an area served by more than one wireless LAN. If so, the LANs could be interfering with each other.
Troubleshooting and Maintenance Configuring Your Notebook 84 Reference Guide Configuring Your Notebook The BIOS Setup utility helps you configure your notebook operation.
Troubleshooting and Maintenance Configuring Your Notebook Reference Guide 85 Main Menu Setting Description Default BIOS Revision Shows the current BIOS version. Detected automatically System Time Sets the time using 24-hour format. Values set take effect immediately.
Troubleshooting and Maintenance Configuring Your Notebook 86 Reference Guide System Devices Menu Settin g Description Default Video Display Device Sets whether the built-in display automatically switches to an external display, if one is detected.
Troubleshooting and Maintenance Configuring Your Notebook Reference Guide 87 Boot Menu Setting Description Default Hard Drive +Removable Devices CD-ROM Drive Built-in LAN Shows the order of boot devices. Move the entries to change the order. If the notebook has more than one device in a + category, you can select the one scanned.
Troubleshooting and Maintenance Reinstalling and Updating Software 88 Reference Guide Reinstalling and Updating Software Your notebook includes two features that allow you to install individual softwa.
Reference Guide 89 Reference Information.
Reference Information Modem Reference Information 90 Reference Guide Modem Reference Information You can customize the operation of the modem using AT commands and S-registers. You can do this from Phone and Modem Options in Control Panel, from most communications software, or by using terminal mode in your software.
Reference Information Modem Reference Information Reference Guide 91 Conexant AT Commands (Advanced Users Only) Command Function (Conexant) N0 or N1 Included for compatibility only; returns result code. O n 0=go on-line, 1=go on-line and initiate retrain sequence.
Reference Information Modem Reference Information 92 Reference Guide Conexant AT Commands (Advanced Users Only) Command Function (Conexant) +ESA= a , b , c , d , e , f , g , h Controls operation of synchronous access mode: a =0 specifies in transparent sub-mode, modem transmits 8-bit SYN sequence on idle.
Reference Information Modem Reference Information Reference Guide 93 Conexant AT Commands (Advanced Users Only) Command Function (Conexant) +VRID= n Report caller ID: 0=use formatted presentation, 1=use unformatted presentation. -QCPC Use full startup procedures on next connection, then select startup procedure defined by +PQC.
Reference Information Modem Reference Information 94 Reference Guide Conexant AT Commands (Advanced Users Only) Command Function (Conexant) +MS= a , b , c , d , e , f Select modulation ( b , c , d , e , and f are optional).
Reference Information Modem Reference Information Reference Guide 95 Conexant AT Commands (Advanced Users Only) Command Function (Conexant) +FLO= a Set flow control type: 0=XON/XOFF and RTS/CTS flow control turned off; 1=XON/XOFF flow control in either direction; 2=RTS for flow control of modem by DTE, and CTS for flow control of DTE by modem.
Reference Information Modem Reference Information 96 Reference Guide S-Registers (Conexant) Register Function (Conexant) Range/units Default S0 Number of rings to auto-answer. 0–255/rings 0 S1 Ring counter. 0–255/rings 0 S2 Escape character. 0–255/ASCII 43 S3 Line termination character.
Reference Information Safety Information Reference Guide 97 Safety Information Power cords The power cord supplied with the notebook AC adapter should match the plug and voltage requirements for your local area. Regulatory approval for the AC adapter has been obtained using the power cord for the local area.
Reference Information Safety Information 98 Reference Guide Battery safety • To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object to touch the battery contacts. • Do not disassemble the battery. There are no serviceable parts inside.
Reference Information Safety Information Reference Guide 99 • If the unit requires service, contact an authorized service center. • Do not attempt to make any adjustment of the unit. • Avoid direct exposure to the laser beam — do not open the unit.
Reference Information Safety Information 100 Reference Guide Exposure to radio frequency radiation The radiated output power of the IEEE 802.11 and Bluetooth internal wireless radio is far below the FCC radio frequency exposure limits.
Reference Information Regulatory Information Reference Guide 101 Regulatory Information This section presents information that shows how your computer complies with regulations in certain regions. Any modifications to your computer not expressly approved by the manufacturer could void the authority to operate the computer in these regions.
Reference Information Regulatory Information 102 Reference Guide Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.
Reference Information Regulatory Information Reference Guide 103 The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including .
Reference Information Regulatory Information 104 Reference Guide The internal wireless radio complies with RSS 210 of Industry Canada. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding.
Reference Information Regulatory Information Reference Guide 105 Germany: License required for outdoor installations. Check with reseller for procedure to follow. Netherlands: License required for outdoor installations. Check with reseller for procedure to follow.
Reference Information Regulatory Information 106 Reference Guide In caso di problemi, per prima cosa rivolgersi al fornitore dell ’ apparecchiatura. Questa apparecchiatura è stata progettata per funzionare in tutti i paesi dell ’ Area Economica Europea (reti telefoniche pubbliche commutate).
Reference Information Regulatory Information Reference Guide 107 New Zealand Conexant AMC20493 Data Fax Modem PTC 211/02/071 PTC200 General Warning The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network.
Reference Information Regulatory Information 108 Reference Guide Russia International Products sold internationally by the manufacturer and its authorized dealers meet the specifications listed on the following page. Note For regulatory identification purposes, your product is assigned a Regulatory Model Number.
Reference Information Regulatory Information Reference Guide 109 Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) Manufacturer’s Name: Manufacturer’s Address: Hewlett-Packard Company, Personal Systems Group 19310 Pruneridge Ave.
Reference Guide 111 Index A AC adapter compatibility, 11, 55 connecting, 11 AC adapter jack, location, 5 AdHoc wireless network setup, 41 adjusting brightness, 19 volume, 19 airplanes, wireless commun.
112 Reference Guide Hibernation mode definition, 16 Hibernation partition, 62, 87 hot keys, 19 hot notebook, 70 I IEEE 1394 port connecting devices, 53 location, 5 infrared communication troubleshooti.
Reference Guide 113 rebooting boot device, 87 temporary boot device, 17 region code, 23 regulatory information, 101 removing CD, 20, 22 DVD, 20, 22 hard drive, 62 hard drive holder, 63 PC card, 49 res.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) ZE4 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) ZE4 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) ZE4 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) ZE4 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) ZE4 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) ZE4 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) ZE4 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) ZE4 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) ZE4 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
