Benutzeranleitung / Produktwartung XE3 des Produzenten HP (Hewlett-Packard)
Zur Seite of 116
.
ii HP OmniBook XE3 Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. This manual and any examples contained herein are provided “as is” and are subject to change without notice.
HP OmniBook XE3 iii Contents 1. Product Information ................................................................................................. 1-1 Technology Codes ................................................................................
iv HP OmniBook XE3 3. Troubleshooting and Diagnostics ............................................................................. 3-1 Troubleshooting ...................................................................................................
HP OmniBook XE3 v Figures Figure 1-1. Top/Right View ................................................................................................................. 1-3 Figure 1-2. Front View .........................................................
vi HP OmniBook XE3 Tables Table 1-1. OmniBook XE3 Series Models .......................................................................................... 1-1 Table 1-2. Activating Power Modes ..........................................................
HP OmniBook XE3 vii Introduction This manual provides reference information for servicing the HP OmniBook XE3 notebook PC. It is for use by HP-authorized service personnel while installing, servicing, and repairing these products. The manual is designed as a self-paced guide that will train you to install, configure, and repair XE3 notebooks.
.
HP OmniBook XE3 Product Information 1-1 The OmniBook XE3 series is HP’s value all-in-one business notebook computer, targeted at small- to medium-sized businesses. It combines affordability, value, ease-of-use, and quality in a convenient package that integrates easily into any SMB environment at a wide range of prices.
1-2 Product Information HP OmniBook XE3 Technology Codes HP does not change the name of a product every time the product’s technology changes. While this helps ensure continuing market momentum for HP products, it complicates technology deployment and support processes.
HP OmniBook XE3 Product Information 1-3 Features The following illustrations show the notebook’s main external features. For an exploded view of the notebook, see page 4-2.
1-4 Product Information HP OmniBook XE3 Figure 1-2. Front View 14. Headphone jack. 15. Status panel mode select button. 16. Status panel. 17. Multimedia buttons. 18. Latch (to open display). Figure 1-3. Rear/Left View 19. AC adapter jack. 20. PS/2 port (external mouse or keyboard).
HP OmniBook XE3 Product Information 1-5 Figure 1-4. Bottom View 33. Battery. 34. Battery latch. 35. SDRAM cover. 36. Port replicator (docking) connector.
1-6 Product Information HP OmniBook XE3 Operation This section gives an overview of the notebook’s operation. Turning the Notebook On and Off You can start and stop the notebook using its power button or blue standby button.
HP OmniBook XE3 Product Information 1-7 Checking the N otebook’s Status The notebook’s status lights—located above the keyboard—report power and battery status, keyboard status, and drive activity. Figure 1-5. Status Lights 1. Power status. 2.
1-8 Product Information HP OmniBook XE3 Table 1-1. Status Lights Indicator Meaning LED next to power button Power status Green: notebook is on. Amber: notebook is in Standby mode. No light: notebook is off or in Hibernate mode. Battery status Green: The AC adapter is connected and the battery is fully charged.
HP OmniBook XE3 Product Information 1-9 Using Fn Hot Keys The combination of the Fn key plus another key creates a hot key —a shortcut key sequence—for various system controls. To use a hot key, press and hold Fn, press the appropriate second key, then release both keys.
1-10 Product Information HP OmniBook XE3 Resetting the Notebook Occasionally, Windows or the notebook may stop responding, so that you cannot turn the notebook off. If this happens, try the following in the order listed: • If possible, shut down Windows: press CTRL+ALT+DEL, then click Shut Down.
HP OmniBook XE3 Product Information 1-11 Using the CD-ROM or DVD Player The multimedia buttons on the front of the notebook control the CD-ROM/DVD player, and work in much the same way as do the controls of a standalone CD-ROM or DVD player. The CD-ROM/DVD player operates whether the notebook is on, off, or in standby or hibernate mode.
1-12 Product Information HP OmniBook XE3 Specifications The following tables list the specifications for the notebook and its accessories. These are subject to change: for the latest versions, see the HP Notebook web site, www.hp.com/notebooks (in Europe: www.
HP OmniBook XE3 Product Information 1-13 Keyboard and Pointing Device Keyboard: – 87-/88-/90-key touch-type QWERTY keyboard with 101/102 key emulation. – Embedded numeric keypad, 12 function (Fn) keys. – Spill-resistant. – NS 87570 keyboard controller.
1-14 Product Information HP OmniBook XE3 Mechanical Features Kensington MicroSaver lock slot. Continuously variable-speed fan. Standards PC99, ACPI. Environmental Limits Operating temperature: 0 to 40 ° C (32 to 104 ° F). Operating humidity: 10 to 90 percent RH without condensation.
HP OmniBook XE3 Product Information 1-15 System Resources The following tables list the default values for the notebook’s system resources. Use the BIOS Setup utility (see page 3-29) to view all available port and audio device configurations in the System Devices menu.
1-16 Product Information HP OmniBook XE3 Table 1-3. System Input/Output Addresses (100-3FF) 170–177 Internal CD-ROM drive (secondary IDE controller) 1F0–1F7 Internal hard disk drive (primary IDE c.
HP OmniBook XE3 Product Information 1-17 Table 1-5. XE3 Series Accessories Accessory Description Memory F1456B 32-MB SDRAM PC-100 expansion module F1457B 64-MB SDRAM PC-100 expansion module F1622B 128.
1-18 Product Information HP OmniBook XE3 Internal Design The motherboard P CA is the central component of the notebook’s design, and plays a role in virtually all system functions. The CPU module and most other subsystems connect to the motherboard.
HP OmniBook XE3 Product Information 1-19 Table 1-1. Functional Structure Function Components Used Component Roles Bootup CPU module Motherboard Floppy disk module Hard disk drive Main processor. Primary system circuitry. First source of disk-based startup code.
.
HP OmniBook XE3 Removal and Replacement 2-1 This chapter tells you how to remove and replace the notebook’s removable components and assemblies. The items marked by • in the following table are user-replaceable. Table 2-1. Removal Cross-Reference • Battery (page 2-3).
2-2 Removal and Replacement HP OmniBook XE3 Disassembly Flowchart The following diagram shows the general “path” you will use in disassembling the notebook to access any particular component.
HP OmniBook XE3 Removal and Replacement 2-3 Table 2-1. Required Equipment • Small Phillips screwdriver, preferably magnetized. • Small flat-blade screwdriver. • 5mm hexagonal socket screwdriver. Table 2-2. Recommended Screw Torques Screw Thread Size Torque (cm-kgf) Torque (in-lbf) M2.
2-4 Removal and Replacement HP OmniBook XE3 Removing the Battery (User-Replaceable) Required Equipment • None. Removal Procedure • Slide the battery’s release latch, then lift the battery out of its compartment.
HP OmniBook XE3 Removal and Replacement 2-5 Removing an SDRAM Module (User-Replaceable) The notebook has no SDRAM on its motherboard, but has slots for two SDRAM modules. One slot contains an SDRAM module installed at the factory. See Table 4-2 on page 4-5 for a listing of replacement SDRAM modules and part numbers.
2-6 Removal and Replacement HP OmniBook XE3 3. Press outward to release the latches at the sides of the SDRAM module, so the free edge of the module pops up.
HP OmniBook XE3 Removal and Replacement 2-7 Removing the Mini-PCI PCA (User-Replaceable) Certain notebook models include a mini-PCI PCA that contains either a modem or modem/LAN. See Table 4-2 on page 4-5 for a listing of replacement PCAs and part numbers.
2-8 Removal and Replacement HP OmniBook XE3 Figure 2-5. Removing the Mini-PCI Card Reassembly Notes • Reattach the cable (modem models only) or cables (modem/LAN models only) to the PCA, and tuck them into the compartment. • Gently press the mini-PCI card into the connector at an angle o f about 30°, until it is fully inserted.
HP OmniBook XE3 Removal and Replacement 2-9 Removing the Keyboard Cover (with Hinge Covers) (User-Replaceable) Required Equipment • Small Phillips screwdriver. • Small flat-blade screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery.
2-10 Removal and Replacement HP OmniBook XE3 Figure 2-7. Removing the Keyboard Cover Reassembly Notes • Tuck the display cables into the notch just to the right of the left display hinge.
HP OmniBook XE3 Removal and Replacement 2-11 Removing the Keyboard (User-Replaceable) Required Equipment • Small Phillips screwdriver. • Small flat-head screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2.
2-12 Removal and Replacement HP OmniBook XE3 Figure 2-9. Disconnecting the Keyboard Cable Reassembly Notes • Lay the keyboard face down on the top case forward of its normal position, then reconnect the ribbon cable. • Slip the metal tabs on the bottom of the keyboard into their slots in the top case, then lower the keyboard into place.
HP OmniBook XE3 Removal and Replacement 2-13 Removing the Hard Disk Drive Assembly (User-Replaceable) See Table 4-2 on page 4-5 for a listing of replacement hard disk drives and part numbers. Required Equipment • Small Phillips screwdriver. Removal Procedure 1.
2-14 Removal and Replacement HP OmniBook XE3 5. Remove all four screws from the underside of the hard drive carrier, then slide the drive back and up out of the case.
HP OmniBook XE3 Removal and Replacement 2-15 Recovering and Reinstalling Software You can use the Recovery CD to recover an original build or reinstall the HP custom software. To recover a specific application , see “To recover an application” in the Reference Guide .
2-16 Removal and Replacement HP OmniBook XE3 Replacing Small Parts (User-Replaceable) The user can replace the following small parts. Table 2-1. Replacing Small Parts (User-Replaceable) Part Replacement Procedure Cover, mini-PCI On the bottom of the notebook, loosen the screw in the mini-PCI cover (the cover retains the screw) and remove the cover.
HP OmniBook XE3 Removal and Replacement 2-17 Removing the Display Assembly (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove these additional assemblies: • Keyboard cover (page 2-9).
2-18 Removal and Replacement HP OmniBook XE3 Figure 2-12. Removing the Display Reassembly Notes • While installing the hinge screws, support the display so that it remains approximately flat. • Before installing the switchboard PCA, make sure the large display cable lies within the notch in the hinge saddle.
HP OmniBook XE3 Removal and Replacement 2-19 Installing a New Display Assembly When installing a new display, you must make sure to set the DIP switches on the video PCA to match the particular display assembly. Do this as follows. Caution Setting the DIP switches improperly could damage the display assembly.
2-20 Removal and Replacement HP OmniBook XE3 Removing the Top Case (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove these additional assemblies: • Keyboard cover (page 2-9).
HP OmniBook XE3 Removal and Replacement 2-21 8. Release the CD player PCA cable from the motherboard. Figure 2-15. Removing the Top Case Reassembly Notes • Make sure the touch pad cable and speaker cable connectors are fully inserted squarely in their sockets.
2-22 Removal and Replacement HP OmniBook XE3 Removing the CD Player PCA (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove these additional assemblies: • Keyboard cover (page 2-9).
HP OmniBook XE3 Removal and Replacement 2-23 Removing the Hinge Saddle Set (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove these additional assemblies: • Keyboard cover (page 2-9).
2-24 Removal and Replacement HP OmniBook XE3 4. Remove the retaining screws from the back of the notebook, just below the display hinges. 5. Remove both retaining screws from the hinge saddle set.
HP OmniBook XE3 Removal and Replacement 2-25 Removing the Video PCA (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove these additional assemblies: • Keyboard cover (page 2-9).
2-26 Removal and Replacement HP OmniBook XE3 4. Remove all three retaining screws from the PCA, and carefully lift it off of the connectors underneath it. Figure 2-19. Removing the Video PCA Reassembly Notes • Set the DIP switches on the new PCA to match the settings from the PCA you are replacing and the notebook’s display type.
HP OmniBook XE3 Removal and Replacement 2-27 Removing the Heatsink Assembly (with Fan) (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery.
2-28 Removal and Replacement HP OmniBook XE3 Figure 2-20. Removing the Heatsink Assembly Reassembly Notes • Make sure the fan cable is not pinned under the assembly. • Make sure the thermal pad on the heatsink is not damaged, and replace if necessary.
HP OmniBook XE3 Removal and Replacement 2-29 Removing the CPU Module (HP Authorized Service Providers Only) See Table 4-1 on page 4-3 for a listing of replacement hard disk drives and part numbers. Required Equipment • Small Phillips screwdriver. • Small flat-blade screwdriver.
2-30 Removal and Replacement HP OmniBook XE3 Figure 2-21. Removing the CPU Module Reassembly Notes • Make sure the module is fully seated on its socket, and that none of its pins are bent or otherwise damaged.
HP OmniBook XE3 Removal and Replacement 2-31 Removing the Floppy Disk Drive (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. • Keyboard cover (page 2-9).
2-32 Removal and Replacement HP OmniBook XE3 Figure 2-22. Removing the Floppy Disk Drive Reassembly Notes • Make sure the headphone PCA cable lies under the FDD bracket.
HP OmniBook XE3 Removal and Replacement 2-33 Removing the CD-ROM/DVD Drive (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. • Keyboard cover (page 2-9).
2-34 Removal and Replacement HP OmniBook XE3 Removing the Motherboard or Bottom Case (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver.
HP OmniBook XE3 Removal and Replacement 2-35 Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove these additional assemblies: • Battery (page 2-3). • SDRAM modules (page 2-5). • Mini-PCI card (page 2-7). • Keyboard cover (page 2-9).
2-36 Removal and Replacement HP OmniBook XE3 Figure 2-24. Removing the Motherboard Reassembly Procedure • When reinstalling the motherboard, see “Reinstalling the Motherboard” on page 2-37. • When reinstalling the bottom case, see “Replacing the Bottom Case” on page 2-38.
HP OmniBook XE3 Removal and Replacement 2-37 Reinstalling the Motherboard Reassembly Procedure 1. Install the CPU support plate. 2. Insert the I/O connectors through their openings in the bottom case, then lower the motherboard into place.
2-38 Removal and Replacement HP OmniBook XE3 Replacing the Bottom Case Installation Procedure 1. Install a new Microsoft Product ID label. 2. Transfer the old serial number label and install a new overlay, or create a new serial number label using the steps below.
HP OmniBook XE3 Removal and Replacement 2-39 Figure 2-26. Installing the PCMCIA Doors Installing a New Serial Number Label Download the latest version of the serial number label template (Microsoft Word format) from the Partnership Web site (see page vii) under Support/Service in Technical Support Information, or from http://www.
2-40 Removal and Replacement HP OmniBook XE3 Removing Notebook Components (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. • Small flat-blade screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery.
HP OmniBook XE3 Removal and Replacement 2-41 Component Removal Procedure Additional Steps Doors, PCMCIA Mini-PCI card (page 2-7). Keyboard cover (page 2-9). Keyboard (page 2-11). Hard disk drive assembly (page 2-13). Display assembly (page 2-17). Top case assembly (page 2-19).
2-42 Removal and Replacement HP OmniBook XE3 Component Removal Procedure Additional Steps Plate, CPU support Mini-PCI card (page 2-7). Keyboard cover (page 2-9). Keyboard (page 2-11). Hard disk drive assembly (page 2-13). Display assembly (page 2-17).
HP OmniBook XE3 Troubleshooting and Diagnostics 3-1 This chapter includes troubleshooting and diagnostic information for testing the functionality of the notebook, and for identifying faulty modules: • Troubleshooting information Troubleshooting the problem (page 3-3).
3-2 Troubleshooting and Diagnostics HP OmniBook XE3 Troubleshooting The suggestions in this section can help isolate and repair the cause of a problem. To ensure quality repair, HP recommends that you follow the basic troubleshooting steps shown in the illustration below.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-3 Troubleshooting the Problem Record pertinent information about the notebook: • Model and serial number. • Operating system and version. • BIOS version. • Accessories and peripherals used. Analyze the problem: • Observe Symptoms.
3-4 Troubleshooting and Diagnostics HP OmniBook XE3 Suggestions for Troubleshooting Table 3-1. Scope of Diagnostic Tools Function DiagTools Power-On Self-Test Sycard PCCtest 450 DMI/TopTools (if insta.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-5 If you cannot isolate the cause of a problem using the above diagnostic tools, use the suggestions in the following table to help find the problem.
3-6 Troubleshooting and Diagnostics HP OmniBook XE3 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Does not boot from CD-ROM or DVD in CD-ROM/DVD drive. Make sure CD-ROM or DVD is bootable. Use BIOS Setup to check boot order and make sure CD-ROM/DVD Drive is enabled as first boot device.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-7 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Battery has short operating time. Turn down display brightness. Check Intel SpeedStep Technology settings in BIOS Setup Power menu.
3-8 Troubleshooting and Diagnostics HP OmniBook XE3 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments White display. Adjust display brightness. Display assembly. Switchboard PCA. Erratic display. Display cable connection.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-9 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Floppy drive General problems. Make sure floppy drive is installed correctly. Check settings in BIOS Setup. Floppy drive module or contacts.
3-10 Troubleshooting and Diagnostics HP OmniBook XE3 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Touch pad General problems. Slide and hold power button four seconds to reset notebook. Avoid touching touch pad while booting or resuming.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-11 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Serial/Parallel/USB General problems. Check connections. Restart notebook. Check settings in BIOS Setup. Check settings in Control Panel.
3-12 Troubleshooting and Diagnostics HP OmniBook XE3 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Modem will not connect at any speed. Make sure notebook’s modem is properly connected to wall telephone jack. Make sure telephone line is not already in use.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-13 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Printing Serial or parallel printer doesn’t print Make sure printer is on. Make sure printer cable is securely attached at both ends.
3-14 Troubleshooting and Diagnostics HP OmniBook XE3 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments PC card Miscellaneous problems. Remove and reinsert PC card. Restart notebook. Try card in other slot or in another computer.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-15 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Notebook pauses or runs sluggishly. May be normal Windows behavior (background processing can affect response time).
3-16 Troubleshooting and Diagnostics HP OmniBook XE3 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Port replicator Docking product I/O problems. Make sure AC power is connected to port replicator. Make sure notebook is fully inserted in port replicator.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-17 Diagnostic Tools This section describes the following diagnostic tools you can use for troubleshooting and repairing the notebook: • DiagTools diagnostic program (below). • Power-on self-test (page 3-24).
3-18 Troubleshooting and Diagnostics HP OmniBook XE3 Running DiagTools 1. Restart the notebook. 2. When the HP logo appears, press F10 to start the diagnostic test. 3. When the initial diagnostics screen appears, press F2 twice to continue. 4. When the hardware detection finishes, check the list of detected hardware.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-19 9. When you are finished, press ESC to exit the advanced tests. 10. Press F4 twice (from the advanced test screen) or three times (from the basic test screen) to save system and test information in the Support Ticket log file.
3-20 Troubleshooting and Diagnostics HP OmniBook XE3 Interpreting the Results • The following table lists test groups, error codes, and suggestions for follow-up actions. Consider these suggestions in combination with other troubleshooting information.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-21 Code Suggestions 0265h Check hard disk connection. Replace the hard disk. Replace the motherboard. 0275h Replace the hard disk. 0280h Check hard disk connection. Replace the hard disk. Replace the motherboard.
3-22 Troubleshooting and Diagnostics HP OmniBook XE3 Code Suggestions 2100h – 2102h Replace the display assembly. Replace the video PCA. Replace the motherboard. If error also occurs with external monitor, replace the motherboard. 2110h – 2120h Replace the video PCA.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-23 Code Suggestions 9605h Run full HDD test, For a notebook that does not give an F10 prompt at boot (no Hibernate partition) or that has a non-Windows operating system, this error may not indicate a failure.
3-24 Troubleshooting and Diagnostics HP OmniBook XE3 Power-On Self-Test Note If Quiet Boot is enabled in BIOS Setup (the default setting), press ESC during boot to see POST messages. The POST (Power-On Self-Test) is a series of initialization routines and diagnostic tests that the system BIOS runs when the notebook boots.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-25 The following table lists POST messages and explanations for reported problems. If the system fails after you make changes in BIOS Setup, reset the notebook, enter BIOS Setup, and install the defaults or correct the error.
3-26 Troubleshooting and Diagnostics HP OmniBook XE3 Message Description 02F5: DMA Test Failed BIOS test error: Cannot write to extended DMA (Direct Memory Access) registers. 02F6: Software NMI Failed BIOS test error: Cannot generate software NMI (Non-Maskable Interrupt).
HP OmniBook XE3 Troubleshooting and Diagnostics 3-27 Sycard PCCtest 450 CardBus Card (Optional) The PCCtest 450 CardBus Card (version 1.05) available from Sycard Technology is the only recommended diagnostic tool that tests the functionality of the PCMCIA slots using a PCMCIA card.
3-28 Troubleshooting and Diagnostics HP OmniBook XE3 Desktop Management Interface (DMI) The Desktop Management Interface (DMI) is basically a set of rules for accessing information about a personal computer.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-29 Using the DMI Interface For a complete explanation of how to take full advantage of DMI, see the following documentation (provided with your notebook): • A README.TXT file. • A Windows online help file describin g Hewlett-Packard’s implementation of DMI (group and attribute definitions).
3-30 Troubleshooting and Diagnostics HP OmniBook XE3 BIOS Setup Utility The BIOS Setup utility provides access to basic configuration settings. It is independent of the operating system. Running the BIOS Setup Utility 1. Close all applications, then click Start, Shut Down, Reboot.
HP OmniBook XE3 Troubleshooting and Diagnostics 3-31 System Devices Menu Description Default PS/2 Pointing Devices Enables (Both) or disables (Auto) the internal pointing devices when an external PS/2 mouse is connected. Auto External Fn Key Sets whether left CTRL+left ALT on an external keyboard is interpreted as the Fn key.
3-32 Troubleshooting and Diagnostics HP OmniBook XE3 Power Menu Description Default Intel SpeedStep Technology Sets CPU high-/low-speed mode: – Auto: boot at high speed on AC, low speed on battery. – Reversed: boot at low speed on AC, high speed on battery.
HP OmniBook XE3 Replaceable Parts 4-1 This chapter contains an exploded view of the XE3 and the following lists of parts: • Replaceable parts (page 4-3).
4-2 Replaceable Parts HP OmniBook XE3 Figure 4-1. Exploded View.
HP OmniBook XE3 Replaceable Parts 4-3 Table 4-1. Replaceable Parts Description Part Number Exchange User- Part Number Repl. 1 Battery, LiIon (9 cell) F2111-60901 Yes 2 Case, bottom (modem & modem/LAN) F2111-60964 No 2 Case, bottom (no modem or LAN) F2111-60974 No 3 Case, top F2111-60947 No 4 Cover, keyboard F2111-60939 Yes 5 Display, 12.
4-4 Replaceable Parts HP OmniBook XE3 Description Part Number Exchange User- Part Number Repl. Kit, covers F2111-60943 No 12 Cover, SDRAM (see above kit) No 13 Cover, mini-PCI (see above kit) No 14 Do.
HP OmniBook XE3 Replaceable Parts 4-5 Table 4-2. Accessory Replaceable Parts Description Part Number Exchange User Part Number Repl. AC adapter (60-watt) (F1454A) 0950-3634 Yes Adapter, PS/2 “Y” (.
4-6 Replaceable Parts HP OmniBook XE3 Table 4-3. Part Number Reference Part Exchange Description User Number Part Number Repl. 0950-3634 Adapter, AC (60 watt) Yes 0950-3765 Adapter, AC, Ultra Slimline (60 watt) Yes 0950-3825 F2072-69103 Drive, hard disk (5 GB, 9.
HP OmniBook XE3 Replaceable Parts 4-7 Part Exchange Description User Number Part Number Repl. F2111-60928 Keyboard, Czech No F2111-60929 Keyboard, Greek No F2111-60930 Keyboard, Belgian No F2111-60931.
4-8 Replaceable Parts HP OmniBook XE3 Part Exchange Description User Number Part Number Repl. F2113-60906 Recovery CD, International English W98 No F2113-60907 Recovery CD, Swedish/English W98 No F211.
HP OmniBook XE3 Reference Information 5-1 This chapter includes the following reference information: • Password removal policy. • Display quality statement. Password Removal Policy If the user forgets the system password, the user calls Technical Support to determine the proper removal procedure.
5-2 Reference Information HP OmniBook XE3 Hewlett-Packard Display Quality Statement TFT display manufacturing is a highly precise but imperfect technology, and manufacturers cannot produce large displays that are cosmetically perfect. Most, if not all, TFT displays exhibit some level of cosmetic imperfection.
HP OmniBook XE3 Reference Information 5-3 Table 5-1. XE3 TFT LCD Guidelines (12.1-in SVGA, 13.3/14.1/15.0-in XGA) Type of Imperfection Imperfections Not Allowed Electrical Imperfections: Bright dots (a) Dark dots (a) • 7 or more single bright dots. • 7 or more single dark dots.
5-4 Reference Information HP OmniBook XE3 Service Notes Service notes containing important repair information for the notebook will be issued periodically as needed.
.
1. Product Information 2. Removal and Replacement 3. Troubleshooting and Diagnostics 4. Replaceable Parts 5. Reference Information (QJOLVK 3ULQWHGLQ7DLZDQ 3DUW1XPEHU3).
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) XE3 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) XE3 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) XE3 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) XE3 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) XE3 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) XE3 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) XE3 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) XE3. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) XE3 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
