Benutzeranleitung / Produktwartung PCLA8205B des Produzenten HP (Hewlett-Packard)
Zur Seite of 49
EtherExpress TM Pro/10+ ISA PCLA8205B Installation Guide.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress Pro 10+ ISA 10MBS Ethernet adapter card and drivers disk.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 listed above under the heading “Device Configuration.” 6 If changes are required, save those changes and exit. 7 Remove the Intel drivers diskette, insert Netware client for DOS and MS-Windows disk 1.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 ❒ C:NOVELLCLIENT32 ❒ C:WINDOWS ❒ 16-bit LAN drivers ❒ Intel EtherExpress ™ PRO/10 15 Press “F10” to save and continue. 16 When prompted, insert the corresponding disks to complete file transfer and driver installation.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • Intel EtherExpress Pro 10+ ISA Ethernet card and drivers disk. • Driver Name for Vectra VL8 and VE7/VE8: NETPRO.INF Size: 12KB Date: 4/25/97.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 8 Power on the machine and allow it to boot to Windows 95 SR2. If you are using a Vectra VL8 or VL7, go directly to step 9. If you are using a Vectra VE7/VE8, follow the instructions below and then go to step 16.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 15 Click on “Close” button, and files will copy. 16 When prompted for the file “NETAPI.DLL”, set the path to your Windows 95 files and click “OK.” (For HP preloaded HDD’s, set the path to C:WIN95.
1 Connecting to a Netware 3.12 Server Windows 95 SR2.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress Pro 10+ ISA 10MBS Ethernet adapter card and drivers disk.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 listed above under the heading “Device Configuration.” 6 If changes are required, save those changes and exit. 7 Remove the Intel drivers diskette, insert Netware client for DOS and MS- Windows disk 1.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 ❒ C:NOVELLCLIENT32 ❒ C:WINDOWS ❒ 16-bit LAN drivers ❒ Intel EtherExpress ™ PRO/10 15 Press “F10” to save and continue. 16 When prompted, insert the corresponding disks to complete file transfer and driver installation.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • Intel EtherExpress Pro 10+ ISA Ethernet card and drivers disk Ver. 3.5. • Vectra VL8 and VE7/VE8 Driver Name: NETPRO.INF Size: 12KB Date: 4/25/97 • Vectra VL7 Driver Name: EPRO.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 8 Power on the machine and allow it to boot to Windows 95 SR2. If you are using a Vectra VE7/VE8, follow the instructions below to complete the procedure. If you are using a VL8 or VL7, go directly to step 9.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 13 Click “OK” to the “Network” dialog box to provide computer / work group names. 14 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator.
2 Connecting to a Netware 4.11 Server Windows 95 SR2.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress Pro 10+ ISA Ethernet adapter card and drivers disk Ver.
Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine. 8 After Windows loads, open the “NETWORK” program group, and double- click the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 20 When prompted for the file “EPRO.DOS”, insert the Intel EtherExpress drivers disk Ver.
Windows for Workgroups Version 3.11.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 • Intel EtherExpress PRO 10+ ISA Ethernet card and drivers disk. • Driver Name: PROW95.VXD Size: 6K Date: 8/7/96 • Microsoft Windows NT Server 3.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 If you are using a Vectra VE7/VE8, follow the instructions below to complete the procedure. If you are using a VL8 or VL7, go directly to step 9. a Click on "Start" then "Settings" and open the "Control Panel.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 names. 14 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator.) 15 Click on “Close” button, and files will copy.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress Pro 10+ ISA Ethernet card and drivers disk.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 on “Control Panel.” 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstation CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Setup” dialog box..
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • Intel EtherExpress PRO/10+ ISA Ethernet card and drivers disk.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 7 Remove the Intel drivers diskette and reboot the machine. 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 25 When “Windows NT is now ready to start the network…” click on “Next.” 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress Pro 10+ ISA Ethernet adapter card and drivers disk Ver.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 7 Remove the Intel drivers diskette and reboot the machine. 8 After Windows loads, open the “NETWORK” program group, and double- click the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 20 When prompted for the file “EPRO.DOS”, insert the Intel EtherExpress drivers disk Ver. 3.5”, and set the path to “A:NDIS.” (If you have an HP-preloaded HDD, set path to “C:MastersLanDrvPro10NDIS”.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO 10+ ISA Ethernet card and drivers disk. • Driver Name: PROW95.VXD Size: 6K Date: 8/7/96 • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation. If not, go directly to step 9. a Click on "Start" then "Settings" and open the "Control Panel.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 14 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator.) 15 Click on “Close” button, and files will copy.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress Pro 10+ ISA Ethernet card and drivers disk Ver.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 on “Control Panel.” 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstation CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 23 To complete the installation, remove the floppy disk, and click on “Restart Computer” button in the “Windows NT Workstation Networking Setup” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • Intel EtherExpress PRO/10+ ISA Ethernet card and drivers disk ver. 3.5. • Driver Name: EPRO.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 7 Remove the Intel drivers diskette and reboot the machine. 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 24 At the “Show Bindings for:” prompt, accept default settings and click on “Next.” 25 When “Windows NT is now ready to start the network…” click on “Next.” 26 Specify your Computer Name, Workgroup or Domain and click on “Next.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0.
.
V ersion Number Intel Pro10+ Rev .1.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) PCLA8205B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) PCLA8205B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) PCLA8205B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) PCLA8205B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) PCLA8205B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) PCLA8205B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) PCLA8205B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) PCLA8205B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) PCLA8205B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
