Benutzeranleitung / Produktwartung NX9110 des Produzenten HP (Hewlett-Packard)
Zur Seite of 166
Har d w ar e Gu ide HP Notebook Ser ies Doc ument P art Number : 3 5 5 38 6 -001 No ve mber 200 3 This guide explains ho w to identify and use notebook hardware features, including connectors for external de vices. It also includes po wer and en vironmental specifications, which might be helpful when trav eling with the notebook.
Thank you for purchasing this Factory Service Manual CD/DVD from servicemanuals4u.com. Please check out our eBay auctions for more great deals on Factory Service Manuals: servicemanuals4u.
© 2003 Hewlett-P ackard Development Compan y , L.P . Microsoft ® and W indows ® are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor . Bluetooth ® is a trademark owned b y its proprietor and used by Hewlett-P ackard Company under license.
Har dw ar e Guide iii Cont ent s 1 Hardware Components Identifying Parts of the Notebook . . . . . . . . . . . . . . . . . . 1–1 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 TouchPad . . . . . . . . . .
iv H a rdwa re G u id e Cont en ts Hotkey Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8 Hotkey Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8 Using Quick Launch Buttons . . . . . . . . . . . . . . . . . . .
Cont en ts Har dw are Gui de v Using Drive Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4 Avoiding Standby and Hibernation . . . . . . . . . . . . . . 4–4 Displaying Media Contents . . . . . . . . . . . . . . . . . . . . 4–5 Adding a Drive to the System .
vi H a rdwa re G u id e Cont en ts 6 External Device Connections Connecting a Standard Device . . . . . . . . . . . . . . . . . . . . . 6–1 Connecting a USB Device . . . . . . . . . . . . . . . . . . . . . . . . 6–2 Using a USB Device . . . . . . .
Cont en ts Har dw ar e Guide v ii Using Digital Media Cards (Select Models) . . . . . . . . . . 8–6 Inserting an Optional Digital Media Card . . . . . . . . . 8–7 Removing an Optional Digital Media Card . . . . . . . . 8–9 Disabling an Optional Digital Media Card .
Hard war e Guide 1–1 1 Har d w a r e Comp one nt s Id entifying P ar ts of t he Notebook Components included with the notebook v ary by geographical region and b y model. This guide includes illustrations for the dif ferent models and features. In each section, refer to the illustrations that closely match your notebook.
1–2 Hardw are Guide Har dw are Co mpo nen ts Component Description Displa y release latch Opens the notebook..
H a rdwa re Co m p o ne n t s Hard war e Guide 1–3 To u c h Pa d Component Description 1 T ouchP ad* Mov es the pointer and selects or activa tes items on the screen. 2 Left and right T ouchP ad but to n s Function like the left and right buttons of an e xternal mouse.
1–4 Hardw are Guide Har dw are Co mpo nen ts Component Description 1 T ouchP ad* Mov es the pointer and selects or activa tes items on the screen. 2 Left and right T ouchP ad but to n s Function like the left and right buttons on an e xter nal mouse.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–5 To p C o m p o n e n t s Pow e r L i g h t s Component Description 1 P ower b utton light On: Notebook is turned on. Blinking: Notebook is in Standby . Off: Notebook is off or in Hibernation. 2 P ower/Standb y light On: Notebook is turned on.
1–6 Hardw are Guide Har dw are Co mpo nen ts Component Description 1 P ower b utton light On: Notebook is turned on. Blinking: Notebook is in Standby . Off: Notebook is off or in Hibernation. 2 P ower/Standb y light On: Notebook is turned on. Blinking: Notebook is in Standby .
H a rdwa re Co m p o ne n t s Hard war e Guide 1–7 K eyboard an d Dr ive Li g ht s Component Description 1 Caps lock light On: Caps lock is on. 2 Num lock light On: Num lock or the internal ke ypad is on.
1–8 Hardw are Guide Har dw are Co mpo nen ts Component Description 1 Caps lock light On: Caps lock is on. 2 Num lock light On: Num lock or the internal ke ypad is on.* 3 IDE (Integrated Driv e Electronics) light; also refe rred to as hard drive/optical drive activity light On: The internal hard dr ive or the optical drive ba y is being accessed.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–9 P o wer and V olume C ontrols Component Description 1 P ower b utton* When the notebook is: ■ Off , press the button to turn on the notebook. ■ On, briefly press the button to initiate Hibernation.
1– 1 0 H a rdwa re G u id e Har dw are Co mpo nen ts Component Description 1 P ower b utton* When the notebook is: ■ Off , press the button to turn on the notebook. ■ On, briefly press the button to initiate Hibernation. ■ In Standby , briefly press the button to resume from Standby .
H a rdwa re Co m p o ne n t s Hard war e Guide 1–11 Qui c k Launc h B ut tons an d K e yboard K e y s Component Description 1 Quick Launch b uttons: Picture, Media, and Internet F rom left to r ight: 3 programmab le buttons enab le you to access the My Pictures f older , a multimedia application, and the Internet with one ke ystroke.
1– 1 2 H a rdwa re G u id e Har dw are Co mpo nen ts 2 Wireless On/Off button Enables wi reless functionality , b ut does not create a wireless connection. ✎ To set up and complete a wireless connection, additional hardware and software might be required.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–13 Wireless On/O ff B ut ton and Applic atio n K e y s Component Description 1 Wireless On/Off button Enables wireless functionality , b ut does not create a wireless connection. ✎ To set up and complete a wireless connection, additional hardware and software might be required.
1– 1 4 H a rdwa re G u id e Har dw are Co mpo nen ts Fun c t i on an d K eypa d Ke ys Component Description 1 Fn ke y Combines with the function ke ys to perf orm additional system and application tasks. F or example, pressing Fn+F8 increases screen brightness.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–15 Component Description 1 Fn ke y Combines with the function ke ys to perf orm additional system and application tasks. F or example, pressing Fn+F8 increases screen brightness. 2 Function ke ys (11)* P erf or m s ystem and application tasks.
1– 1 6 H a rdwa re G u id e Har dw are Co mpo nen ts Fr ont C omponen ts Component Description 1 Displa y release latch Opens the notebook. 2 P ower/Standb y light On: Notebook is turned on. Blinking: Notebook is in Standby . Off: Notebook is off or in Hibernation.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–17 4 Battery light On: Batter y pack is charging. Blinking: Batter y pack has reached a low-battery condition. Off: A C power is applied, with battery pack either fully charged or not installed, or no A C power is applied.
1– 1 8 H a rdwa re G u id e Har dw are Co mpo nen ts Component Description 1 Stereo speakers (2) Produce stereo sound. 2 P ower/Standb y light On: Notebook is turned on. Blinking: Notebook is in Standby . Off: Notebook is off or in Hibernation. 3 Displa y release latch Opens the notebook.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–19 5 Battery light On: Batter y pack is charging. Blinking: Batter y pack has reached a low-battery condition. Off: A C power is applied, with battery pack either fully charged or not installed, or no A C power is applied.
1– 2 0 H a rdwa re G u id e Har dw are Co mpo nen ts Rea r C o m po n en ts Component Description 1 P ower connector Connects an A C adapter . 2 Exhaust vent Allows airf lo w to cool internal components. Additional v ents are on the bottom of the notebook.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–21 Component Description 1 P ower connector Connects an A C adapter . 2 Exhaust vent Allows airf lo w to cool internal components. Additional v ents are on the bottom of the notebook. Ä T o pre vent ov erheating, do not obstruct the vent.
1– 22 H a rdwa re G u id e Har dw are Co mpo nen ts Left -Si de C omponen ts 1 Component Description 1 Security cable slot Attaches an optional security cable to the notebook. ✎ The purpose of security solutions is to act as a deterrent. These solutions do not prevent the product from being mishandled or stolen.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–2 3 5 USB connectors (2) Connect optional USB de vice, such as printers. 6 Three drive configurations: optional Digital Ba y , optional diskette drive , no dr ive Digital Ba y: Suppor ts optional pock et-sized HP USB Digital Drive.
1– 24 H a rdwa re G u id e Har dw are Co mpo nen ts Component Description 1 Security cable slo t Attaches an optional security cable to the notebook. ✎ The purpose of security solutions is to act as a deterrent. These solutions do not prevent the product from being mishandled or stolen.
H a rdwa re Co m p o ne n t s Hard ware Gui de 1–2 5 4 USB connectors (2) Connect op tional USB de vices, such as printers. 5 Three drive configurations: optional Digital Ba y , optional diskette drive , no dr ive Digital Ba y: Suppor ts optional pock et-sized HP USB Digital Drive.
1– 26 H a rdwa re G u id e Har dw are Co mpo nen ts Right -Sid e Com ponen ts Component Description 1 A udio-out headphone jack Connec ts an optional headphone, a headset, or pow ered stereo speakers . Also connects the au dio function of an audio/video de vice, such as a tele vision or VCR.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–2 7 5 Infrared por t (select models) Provides wireless communication between the notebook and an optional IrD A-compliant device. 6 Expansion por t Connects an optional HP Notebook Expansion Base. 7 RJ-45 network jack Connects an optional network cable.
1– 28 H a rdwa re G u id e Har dw are Co mpo nen ts Component Description 1 Wireless on/off light On: Wireless functionality is enabled, b ut wireless connection might not be configured.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–2 9 4 A udio-in microphone jack Conne cts an optional e xter nal microphone. 5 USB connector Connects an optional USB device , such as a printer . 6 1394 connector (select models) Connects an optional IEEE 1394 de vice, such as a camcorder .
1– 3 0 H a rdwa re G u id e Har dw are Co mpo nen ts Bot tom C ompon ents Component Description 1 Batter y release latch Releases the battery pack from the batter y ba y . 2 Batter y ba y Holds the battery pack. 3 Exhaust vents Allow airflo w to cool internal components.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–31 Component Description 1 Batter y release latch Releases the batter y pack from the batter y ba y . 2 Batter y bay Holds the batter y pack. (Battery shipment and type vary by model.) 3 Exhaust ve nts Allow airflow to cool internal components.
1– 32 H a rdwa re G u id e Har dw are Co mpo nen ts Labels The labels af fix ed to the bottom of the notebook and to the inside of the battery compartment provide information you might need when troubleshooting system problems or trav eling abroad with the notebook.
H a rdwa re Co m p o ne n t s Hard war e Guide 1–3 3 Additional Stan dard C omponen ts The components included with the notebook v ary by geographic region and b y model. The follo wing illustrations and tables identify the standard external components included with most notebook models.
1– 3 4 H a rdwa re G u id e Har dw are Co mpo nen ts Cor ds , Cable s a nd A dapte rs Component Description 1 P ower cord* Connects the A C adapter to an A C electrical outlet. 2 A C adapter** Con ver ts A C power to DC po wer . 3 Modem cables (select models)* Connects the modem to an RJ-11 telephone jack or to a countr y-specific modem adapter .
Hard war e Guide 2–1 2 T ouc hP ad an d K e yboard Using t he T ouc hP ad The T ouchPad duplicates the functions of an optional external mouse..
2–2 Hardw are Guide T ouchP ad and Ke yboar d ■ T o move the pointer , slide your f inger across the T ouchPad surface 1 in the direction you wa nt to mov e the cursor . ✎ If the cursor continues to move after you take your finger off the TouchPad, wait a few se conds for the cursor to stop moving.
T ouchP ad and Ke yboar d Hard war e Guide 2–3 ■ T o move the pointer , slide your f inger across the T ouchPad surface 1 in the direction you wa nt to mov e the cursor . ✎ If the cursor continues to move after you take your finger off the TouchPad, wait a few se conds for the cursor to stop moving.
2–4 Hardw are Guide T ouchP ad and Ke yboar d Set ting T ouc hP a d Prefer en ces The T ouchPad is supported by the mouse softw are in the operating system. T o access the Mouse Properties window , select Start > Control Panel > Printers and Other Hardwa re > Mouse.
T ouchP ad and Ke yboar d Hard war e Guide 2–5 Using t he Hotk e y s ✎ In this guide, the function ke ys are capitalized ( Fn, F5 ). The function ke ys on your keyboard might be lo wercase ( fn, f5 ). Hotke ys are preset combinations of the Fn key 1 and one of the function ke ys 2 .
2–6 Hardw are Guide T ouchP ad and Ke yboar d Identif ying hotk ey s.
T ouchP ad and Ke yboar d Hard war e Guide 2–7 Hotk e y Quick Re f er ence The follo wing table identifies the hotk ey functions set at the fact or y . Default Function Hotkey Open Help and Suppor t Center . Fn+F1 Not used. Fn+F2 Open Microsoft Internet Explorer.
2–8 Hardw are Guide T ouchP ad and Ke yboar d Hotk e y Pr ocedu re s T o use a hotkey command on the notebook k eyboard: ■ Briefly press the Fn ke y , and then briefly press the second ke y of the command. -or- ■ Press and hold do wn the Fn key , briefly press the second key , and then release both ke ys simultaneously .
T ouchP ad and Ke yboar d Hard war e Guide 2–9 Initia te Standb y (Fn+F5) The Fn+F5 hotkey is set b y default to initiate Standby . ■ When the notebook is on, press the Fn+F5 hotke y to initiate Standby . When Standby is initiated, your work is sa ved in random access memory (RAM), the screen is cleared, and po wer is conserved.
2– 1 0 H a rdwa re G u id e T ouchP ad and Ke yboar d Dec rease Screen Brigh tness (Fn+F7) Press the Fn+F7 hotke y to decrease the brightness of the notebook screen. Decreasing brightness conserves po wer . Increase Screen B rightne ss (Fn+F8) Press the Fn+F8 hotke y to increase the brightness of the notebook screen.
T ouchP ad and Ke yboar d Hard war e Guide 2–11 Using Q uic k Launc h B ut tons The 3 Quick Launch buttons enable you to use a single k eystrok e to access default software applications or the Internet.
2– 1 2 H a rdwa re G u id e T ouchP ad and Ke yboar d Reprogr amming t he Q uic k Laun c h But tons Y our notebook Quick Launch bu ttons can be assigned to an Internet location, a network destination, a software application, or a data file.
T ouchP ad and Ke yboar d Hard war e Guide 2–13 Key p a d The notebook has an internal numeric ke ypad and supports an optional external numeric k eypad or an optional e xternal ke yboard that includes a numeric ke ypad. Using t he K e ypad The ke ypad consists of 15 ke ys that can be used like the ke ys on an external k eypad.
2– 1 4 H a rdwa re G u id e T ouchP ad and Ke yboar d Identify ing the ke ypad k ey s.
T ouchP ad and Ke yboar d Hard war e Guide 2–15 T urning t he K ey pa d On an d Of f When the ke ypad is off, press Fn+num lk 1 on the notebook to turn the ke ypad on. When the ke ypad is on, press Fn+num lk on the notebook (or the num lock key on an e xternal keypad) to turn the ke ypad of f.
2– 1 6 H a rdwa re G u id e T ouchP ad and Ke yboar d Identify ing the Fn and num lock k e y s and the num lock li ght.
T ouchP ad and Ke yboar d Hard war e Guide 2–17 S witching K e y Func tions on t he K ey pa d Y ou can temporarily switch the functions of keys on the ke ypad between the standard function a nd the keypad function b y using the Fn key or the Fn+shift k ey combination.
Hard war e Guide 3–1 3 Batte ry P ack s Running th e Notebook on B a t ter y Po w e r The notebook switches between A C power and battery po wer according to the av ailability of an external A C power source, always preferring A C po wer .
3–2 Hardw are Guide Battery P acks Inser ting or Remo ving th e Batte ry P ack Ä CAUT ION: When r emo v ing a battery pack that is the only po wer sour ce, initiate H ibernati on or turn o ff the notebook to pr eve nt loss of work.
Battery P acks Hard war e Guide 3–3 Inserting or r emov ing the bat tery pack.
3–4 Hardw are Guide Battery P acks C hargin g a B a t ter y P ac k The battery pack automatically charges when the notebook is connected to external po wer through an A C adapter . The battery pack charges whether the notebook is po wered off or in use, but it char ges faster when the notebook is powered of f.
Battery P acks Hard war e Guide 3–5 Obtainin g Accura te C harge Information Charging the battery pack prolongs battery life and increases the accuracy of the battery gauge. When char ging the battery: ■ Allo w the battery pack to fully dischar ge before char ging it.
3–6 Hardw are Guide Battery P acks P l a c ing t h e P o w er Meter I con on t h e Ta s k b a r T o place the Power Meter icon on the taskbar , access the Po wer Options windo w . » Select the Adv anced tab, and then select the Always sho w icon on the taskbar check box.
Battery P acks Hard war e Guide 3–7 The battery light continues to blink and: ■ If Hibernation is enabled (the default setting) and the notebook is on or in Standby , the system initiates Hibernation and sav es system memory to the hard drive. Unsa ved work might be lost.
3–8 Hardw are Guide Battery P acks Calib ratin g a B at ter y P ac k When to C alibra te Even if a battery pack is hea vily used, it should not be necessary to calibrate it more than once a month. It is not necessary to calibrate a ne w battery pack before first use.
Battery P acks Hard war e Guide 3–9 Disc harging t he B at ter y P ac k Disab ling H ibernation T o fully discharge the battery pack, disable Hibernation temporarily . T o disable Hibernation: » Select the Po wer Meter icon on the taskbar or access Po wer Options > Hibernate, and clear the Enable Hibernate support check box.
3– 1 0 H a rdwa re G u id e Battery P acks Recharging t he B at ter y P ac k 1. Connect the notebook to external po wer and keep the notebook connected until the battery pack is fully recharged and the battery light turns of f.
Battery P acks Hard war e Guide 3–11 ■ Unplug external de vices not connected to external po wer when you are not using them. ■ Stop or remov e a PC Card or a digital media card that you are not using. ■ Decreasing screen brightness by pressing Fn+F7 sav e s po wer .
3– 1 2 H a rdwa re G u id e Battery P acks Disposin g of a Used B at ter y P ac k Å W ARN ING: Ther e is a risk of f i re and chemi cal burn if a battery pack is handled impr operly . Do not disasse mble , cr ush, or punc ture a battery pack o r short the contacts on it .
Hard war e Guide 4–1 4 Dri v es About Driv e T erms Hard drives are for permanent storage of data f iles and software, such as system files, applications, and dri vers. A hard dri ve is sometimes called a har d disk drive. Optional disk drives (select models) include disk ette dri ves.
4–2 Hardw are Guide Dri ves Depending on your model, the not ebook can read or write to optical dri ves as described in the follo wing table. Optional HP USB Digital Drives (select models) are pocket-sized, SD (Secure Digital) Memory Card dri ves for storing and transferring files such as digital pictures, music, video, or large data f iles.
Dri ves Hard war e Guide 4–3 Carin g for Dri ve s and Driv e Media Dri ves and dri ve media are fragile notebook components that must be handled with care. The follo wing cautions apply to all dri ves. Cautions that concern specif ic procedures are included with the procedures.
4–4 Hardw are Guide Dri ves Carin g for Dri v e M edia Ä CAUT ION: T o pre vent damage to dr iv e media: ■ Do not open the metal shutte r of a disk et te or touch the disk w ithin the disk ette case .
Dri ves Hard war e Guide 4–5 Disp laying Media C onten ts AutoPlay , sometimes called A utorun, is a feature of the operating system. AutoPlay displays the contents of your media on the screen when you insert a CD or D VD into an optical driv e and close the tray .
4–6 Hardw are Guide Dri ves Adding a Driv e to t he Sy stem The internal hard dri ve and optical dri ve are standard features of the notebook. The type of optical driv e varies by notebook model. Hard dri ve capacity can also be added with a microdri ve PC Card or an external hard dri ve.
Dri ves Hard war e Guide 4–7 Using t he I D E Driv e Ligh t The IDE (Integrated Dri ve Electronics) light turns on when the internal hard dri ve or an optical dri ve is being accessed. The light is also referred to as the hard dri ve/optical dri ve acti vity light.
4–8 Hardw are Guide Dri ves Inser ting and Remo ving Driv e Media Ä CAUT ION: T o avo id play back dist ortion or damage to optical medi a, stop the CD or D VD and ex it media so ftwar e befo re ins erting or r emo ving an opti cal driv e. Inser ting a CD or D VD 1.
Dri ves Hard war e Guide 4–9 Inserting a CD or D VD into an optic al dri ve.
4– 1 0 H a rdwa re G u id e Dri ves Rem o vin g a CD or D VD ( Wit h P ow e r) 1. T urn on the notebook. 2. Press the release button 1 on the dri ve bezel to release the media tray , and then pull the tray out until it is fully extended 2 .
Dri ves Hard war e Guide 4–11 Re mov ing a CD or DVD f rom an opti cal dri ve w hen pow er is av ailable.
4– 1 2 H a rdwa re G u id e Dri ves Remo ving a CD or D VD ( Withou t P o wer) If the notebook is turned of f or if no po wer is av ailable, the release button on the dri ve will not work. T o remov e a disc from an optical dri ve without using the release b utton: 1.
Dri ves Hard war e Guide 4–13 Re mov ing a CD or DVD f rom an opti cal dri ve w hen pow er is not a vailable.
4– 1 4 H a rdwa re G u id e Dri ves Insertin g a Disk et te (Selec t Models) To insert a diskette into a diskette dri ve, gently slide the diskette, label side up, into the dri ve until it clicks into place. The media eject button e xtends wh en the diskette is correctly inserted.
Dri ves Hard war e Guide 4–15 Identify ing the media ejec t button on a disk et te dr iv e Remo ving a Disk et te (Selec t Models) T o remove a disk ette from a diskette dri ve: 1. Press the media eject button on the dri ve to eject the diskette. 2.
4– 1 6 H a rdwa re G u id e Dri ves Installin g an Option al HP USB Di gital Driv e (Selec t Mod els) Optional HP USB Digital Dri ves are pocke t-sized, SD (Secure Digital) Memory Card dri ves for storing and transferring f iles such as digital pictures, music, vi deo, or data f iles.
Dri ves Hard war e Guide 4–17 Installin g an Option al SD Memor y Card T o install an SD Memory Card into the Digital Driv e: 1. Remov e the cap of the Digital Drive.
4– 1 8 H a rdwa re G u id e Dri ves Conn ectin g an O ptional Digital Driv e to th e USB P ort The optional Digital Dri ve can be connected to the USB port with the USB cable either retracted or extended. T o connect the Digital Driv e with the USB cable retracted: 1.
Dri ves Hard war e Guide 4–19 Connec ting the Digital Dri ve to the U SB port.
4– 2 0 H a rdwa re G u id e Dri ves T o connect the optional Digital Driv e with the USB cable ext en d ed : 1. Rotate the USB cable until it is fully extended.
Dri ves Hard war e Guide 4–21 2. Insert the connector on the USB cable into the USB port on your notebook. Connec ting the extended U SB cable to the U SB P or t Connec ting the extended U SB cable .
4– 22 H a rdwa re G u id e Dri ves Inser ting an O ptional Digital Driv e into an Option al Digital B ay T o insert an optional Digital Driv e into the optional Digital Bay: 1. Ensure that you hav e installed an SD Memory Card into the Digital Dri ve.
Dri ves Hard war e Guide 4–2 3 I Insert ing th e Digital Dri ve into the D igital Bay.
4– 24 H a rdwa re G u id e Dri ves Remo ving an Option al Digital Driv e from an Option al Digital B ay T o remove the optional Digital Dri ve from the optional Digital Bay: 1. Press the Digital Dri ve release b utton 1 to eject the Digital Dri ve. 2.
Dri ves Hard ware Gui de 4–2 5 Re mo v ing the Digital Dr iv e fr om the Digit al Ba y Finding Option al Driv e Sof t war e Information Software you need to play CDs and D VDs is av ailable on the notebook. For more information, refer to the “Multimedia” chapter in the Softwar e Guide on this CD.
Hard war e Guide 5–1 5 Audio an d Video Adjustin g V olume V olume can be adjusted by using the v olume buttons on the notebook or by accessing the v olume control software.
5–2 Hardw are Guide Audi o and Vi deo ■ T o decrease volume, press the left v olume button 1 . ■ T o increase volume, press the middle v olume button 1 .
Audi o and Vi deo Hard war e Guide 5–3 Using t he Intern al Speak ers The internal speakers play stereo sound from applications, the operating system, games, dri ve media, the Internet, and other sources.
5–4 Hardw are Guide Audi o and Vi deo Conne c ting an A udio De vice Iden tifying Audio J ac ks The notebook has 2 audio jacks: ■ The audio-out jack 1 , sometimes called the line-out jack, connects a headset, headphones, or external stereo speak ers.
Audi o and Vi deo Hard war e Guide 5–5 Identify ing audio jac ks Using the Mic rophone Jack Y our notebook is equipped with a stereo microphone jack. Using sound recording application soft ware and an external, stereo microphone allo ws for stereo (dual channel) recordings and stereo playbacks.
5–6 Hardw are Guide Audi o and Vi deo Using t he Au dio - Ou t Jac k Å W ARN ING: T o reduce the r isk of personal inj ur y , adjus t the vo lume bef or e putting on headphones or a headset . Ä CAUT ION: T o pre vent pos sible damage to an e xternal dev ice , do not plug a monaur al plug into the audi o -out jac k.
Audi o and Vi deo Hard war e Guide 5–7 Conne c ting a n S - V ideo De v ice Con necti ng the Aud io The S-V ideo-out jack supports video signals only .
5–8 Hardw are Guide Audi o and Vi deo Identify ing the S - Video-out jack Identify ing the S - Video-out jack.
Audi o and Vi deo Hard war e Guide 5–9 T urning a Video De vice O n and O ff When an S-V ideo de vice is turned on, an image is displayed. When the de vice is off, an image is not displayed. T o turn on a video device, use one of the follo wing methods: ■ Start or restart the notebook.
5– 1 0 H a rdwa re G u id e Audi o and Vi deo T o change the color television format: 1. Select Start > Control Panel > Appearance and Themes > Display > Settings. Select the Adv anced button and then the A TI Displays tab . 2. Select the TV button, and then select the F ormat tab.
Hard war e Guide 6–1 6 Exter nal D e vice Connec tions Connec tin g a Stan dard De vice The jacks, connectors, and ports described in this guide support standard external de vices. ■ For information about which jack , connector , or port to use, refer to the documentation included with the de vice.
6–2 Hardw are Guide External De vice C onnections Conne cting a USB De v ice USB (Uni versal Serial Bus) is a hardw are interface that can be used to connect external de vices such as a USB keyboard, mouse, dri ve, printer , scanner , or hub to the notebook.
External De vice C onnections Hard war e Guide 6–3 Identify ing the 2 USB connecto rs on the left side and one U SB connector on the r ight side Using a USB De vice USB de vices function in the syst.
6–4 Hardw are Guide External De vice C onnections Linking to an Infrared De vice (Selec t Models) Some notebook models are IrD A-compliant and can communicate with another infrared-equipped de vice that is also IrD A-compliant. The IrD A connection speed standard is 4 megabits per second (Mbps).
External De vice C onnections Hard war e Guide 6–5 L inking to an infr ared de vi ce Set ting Up an Infrared T ransmission For information about using in frared softw are, refer to the operating system Help files. T o set up infrared devices for optimal transmission: ■ Prepare the infrared ports on both de vices for transmission.
6–6 Hardw are Guide External De vice C onnections ■ Shield the ports from direct sunlight, flashing incandescent light, and fluorescent light. ■ Be sure that signals from a remote control or other wireless de vice (such as a cell phone, headphones, or audio de vice) do not aim at either port.
External De vice C onnections Hard war e Guide 6–7 Connec tin g an O ptional C ab le Loc k ✎ The purpose of security solutions is to act as a deterrent. These solutions do not pre vent the product from being mishandled or stolen. T o install a security cable lock: 1.
6–8 Hardw are Guide External De vice C onnections Connec ting a secur it y lock For more information about other security features of your notebook, refer to the “Security” chapter in the Softwar e Guide on this CD.
Hard war e Guide 7–1 7 Modem and N et w ork Con necti on s Using t he Mod em (Selec t Models) Some notebook models include an RJ-11 telephone jack, modem cable, and a preinstalled V .92 modem. Y ou can connect your modem to a telephone line and communicate throughout the world.
7–2 Hardw are Guide Modem and Networ k Connec tions Å W ARN ING: T o re d u c e t h e ri s k of e l e ct r ic s h o ck, fi re, o r d am a g e t o t h e equipment , do not plug a telephone cable into the RJ- 4 5 networ k jac k. Å W ARN ING: Connecting the notebook t o a digital line can permanen tly damage the modem .
Modem and Network C onnections Hard war e Guide 7–3 Conn ectin g t he Modem to an RJ- 1 1 Jack Refer to one of the follo wing illustrations to connect an RJ-11 modem cable.
7–4 Hardw are Guide Modem and Networ k Connec tions Connec ting the RJ-11 modem cable.
Modem and Network C onnections Hard war e Guide 7–5 Con nect ing the Mo dem with an A dapt er T elephone jacks vary by country . T o use the modem and the RJ-11 cable outside the country in which you purchased the notebook, you must obtain a country-specific modem adapter .
7–6 Hardw are Guide Modem and Networ k Connec tions Connec ting a modem cable using a modem adapter Spec ial Restric tions in Cer tain C ountries ■ Many countries impose a black out period after a modem repeatedly fails to connect to a service pro vider .
Modem and Network C onnections Hard war e Guide 7–7 T o change your modem settings: ■ Control P anel. Open Phone and Modem Options in Control Panel to change modem settings b y selecting Start > Control Panel > Netw ork and Internet Connections.
7–8 Hardw are Guide Modem and Networ k Connec tions T o connect to a LAN: 1. Check that the existing LAN supports Ethernet 10B ASE-T/100BASE-TX connections. 2. Plug the purchased network cable into the notebook RJ-45 jack 1 . 3. Plug the other end into the LAN network jack 2 .
Modem and Network C onnections Hard war e Guide 7–9 Connec ting an RJ- 4 5 networ k cable See W indows Help for information about setting up and using LAN connections. Select Start > Help and Support. Contact your network administrator for network information.
7– 1 0 H a rdwa re G u id e Modem and Networ k Connec tions Makin g Wireless Net w ork Connec tions (S elec t Models) Some notebook models are equipped with a wireless network de vice that can connect by radio signals to an 802.11a, 802.11b, or 802.
Modem and Network C onnections Hard war e Guide 7–11 Identify ing the wir eless ante nna Å W ARN IN G: Exposure to Radio Frequency Radia tion The r adiated output po we r of this de vi ce is below the FCC r adio fr equency exposur e limits.
7– 1 2 H a rdwa re G u id e Modem and Networ k Connec tions Tu r n i n g W i r e l e s s C o m m u n i c a t i o n On an d Off W ireless networks and cellular modems are examples of de vices that use wireless communication. The use of some de vices might be restricted in certain situations or en vironments, such as when trav eling in an airplane.
Modem and Network C onnections Hard war e Guide 7–13 Putting the notebook in Standby or Hibernation, or shutting it do wn, also turns of f the wireless function.
7– 1 4 H a rdwa re G u id e Modem and Networ k Connec tions Conn ectin g to a Wireless Net wor k Y ou can connect to an access point that giv es you access to a local area network, or you can connect directly to other computers in an “ad hoc” network.
Modem and Network C onnections Hard war e Guide 7–15 Makin g Bluetooth Wireless Connec tions (S elec t Models) If your notebook includes Bluetooth wireless capabilities, you can use it to make short.
Hard war e Guide 8–1 8 Har d w ar e Up gr ades Obtainin g U pgrades T o order notebook hardware or to learn more about upgrades and accessories, visit the HP W eb site at http://www.
8–2 Hardw are Guide Hard war e Upgr ades Using PC Cards An optional PC Card is a credit card–sized accessory designed to conform to the standard specific ations of the Personal Computer Memory Card International Association (PCMCIA). The notebook supports both 32-bit (CardBus) and 16-bit PC Cards, which will v ary by notebook model.
Hard war e Upgrades Hard war e Guide 8–3 Inser ting a PC Card Ä CAUT ION: T o pre vent damage to the PC C a r d connectors , use minimal for ce when inserting a P C Car d into a P C Car d slot. 1. Hold the PC Card label-side up with the connectors facing the notebook.
8–4 Hardw are Guide Hard war e Upgr ades Inserting a P C Car d.
Hard war e Upgrades Hard war e Guide 8–5 Stoppin g and Remo ving a PC Card Ä CAUT ION: T o prev ent loss of work or an u nresponsiv e sy stem, stop the PC Ca rd b e fo re re m ovi n g i t. ✎ Stopping a PC Card, e ven if it is not in use, conserv e s po wer .
8–6 Hardw are Guide Hard war e Upgr ades Rem ovi n g a PC Ca rd Using Di gital Media C ards (Selec t Models) Optional digital media cards are remov able storage devices that provide a con venient method of storing data and sharing it with other de vices such as PD As, cameras, and other memory card-equipped PCs.
Hard war e Upgrades Hard war e Guide 8–7 Inser ting an O ptional Digital M edia C ard Ä CAUT ION: T o pre vent damage to the digital medi a card connectors , use minimal pr essur e whe n inserting a digital media car d into a Digital Media slot. T o insert a digital media card: 1.
8–8 Hardw are Guide Hard war e Upgr ades Inserting a digital medi a card.
Hard war e Upgrades Hard war e Guide 8–9 Remo ving an Option al Digital M edia C ard Ä CAUT ION: T o pre vent los s of w ork or sy stem lock up , stop the digit al media car d befor e remo vi ng it. T o remove an optional digital media card: 1. Stop the card by closing all f iles and applications that are using it.
8– 1 0 H a rdwa re G u id e Hard war e Upgr ades Re mo v ing a digital medi a car d Disa bling an O ption al Digital Medi a C ard A digital media card inserted into the Digital Media slot uses po wer ev en when the card is not in use. Disabling the card conserves po wer .
Hard war e Upgrades Hard war e Guide 8–11 Inc reasing M emor y Y ou can increase the amount of RAM (random access memory) in the notebook with an optional memory module approv ed by H P . The notebook contains 2 memory slots, one of which is accessible for an optional 128-MB, 256-MB, 512-MB, or 1024-MB memory module upgrade.
8– 1 2 H a rdwa re G u id e Hard war e Upgr ades Re mo ving o r Inse rting a Memory Mo dule Å W ARN ING: T o pr ev ent expo sure t o electr ical shock , access only the memory compartment during this pr ocedure . The hard dr ive ba y and the memory compartment ar e the only u ser -accessible internal compartments on the notebook .
Hard war e Upgrades Hard war e Guide 8–13 5. T urn the notebook upside down. 6. Loosen the scre w that secures the memory compartment cove r 1 , and then tilt and remov e the cov er 2 .
8– 1 4 H a rdwa re G u id e Hard war e Upgr ades Opening the memory compartment.
Hard war e Upgrades Hard war e Guide 8–15 7. Remov e or insert the memory module. T o remove a memory module: a. Pull aw ay the retention clips on each side of the module 1 . (The module tilts up.) b . Grasp the edges of the memory module and gently pull it out of the memory slot 2 .
8– 1 6 H a rdwa re G u id e Hard war e Upgr ades Re mo v ing a memory module.
Hard war e Upgrades Hard war e Guide 8–17 T o insert a memory module: a. Align the ke yed (notched) edge of the module with the ke yed area in the expansion slot 1 . b . From a 45-degree angle, press the module into the slot until it is seated 2 . c.
8– 1 8 H a rdwa re G u id e Hard war e Upgr ades Inserting a memory module.
Hard war e Upgrades Hard war e Guide 8–19 8. Align the tabs on the memory compartment cov er with the cov er slots on the notebook. 9. T ilt the cover do wn until it is seated 1 . 10. Reinsert and tighten the scre w that secures the cov er to the notebook 2 .
8– 2 0 H a rdwa re G u id e Hard war e Upgr ades Closing the me mory compartment.
Hard war e Upgrades Hard war e Guide 8–21 Repla c ing t h e Hard Driv e Remov e the hard drive only for replacement. T o replace the primary hard dri ve: 1. Sav e your work and shut down the notebook. If you are not sure whether the notebook is of f or in Hibernation, briefly press the po wer button.
8– 22 H a rdwa re G u id e Hard war e Upgr ades L oosening the har d dri ve as sembly r etaining sc r e ws.
Hard war e Upgrades Hard war e Guide 8–2 3 7. Remov e the hard drive assembly from the bay . 8. Remov e the 4 hard drive brack et screws 1 . 9. Remov e the hard drive from the brack et 2 .
8– 24 H a rdwa re G u id e Hard war e Upgr ades Re mo v ing the har d dr iv e fr om the hard dr iv e brac k et.
Hard war e Upgrades Hard ware Gui de 8–2 5 10. Insert the ne w hard dri ve into the hard dri ve bracket 1 . 11. Replace the 4 hard dri ve brack et screws 2 .
8– 26 H a rdwa re G u id e Hard war e Upgr ades Inserting the har d dri ve int o the har d dr i ve ba y.
Hard war e Upgrades Hard war e Guide 8–2 7 12. Reinsert the hard dri ve assembly into the hard dri ve bay until it is seated 1 . 13. T ighten the 2 hard drive assembly retaining scre ws 2 .
8– 28 H a rdwa re G u id e Hard war e Upgr ades Finding More Upgra de Informa tion For additional information about installing, remo ving, or operating an optional de vice, refer to the documentation included with the de vice.
Hard war e Guide 9–1 9 Spec ifica tions Opera ting Env ironment Fac t o r Me t r ic U. S. T emperature Operating 0° to 35°C (non writing optical) 5° to 35°C (writing 41° to 95°F optical) 32° .
9–2 Hardw are Guide Spe cificat ion s Rated Inp ut P o w er Input P ower Rating Operating v oltage 100–240 V A C RMS Operating frequency range 50 to 60 Hz A C When powe red by a DC source 18.5 Vdc 6.5 A ✎ This product is designed for IT power systems in Norway with phase-to-phase voltag e not exceeding 240 Vrms.
Hard war e Guide Index–1 Ind e x A AC adapter disconnecting 3–1 identifying 1–34 adapter, modem 7–5 airport security devices 4–3 altitude specifications 9–1 AT commands 7–7 audio devices.
Index–2 Hard war e Guide Index Certificate of Authenticity label 1–32 connectors 1394 1–26 , 1–29 expansion 1–27 drive 4–3 external monitor 1–20 , 1–21 modem 7–2 parallel 1–20 , 1.
Index Hard war e Guide Index–3 H hard drive defined 4–1 replacing 8–21 hard drive bay 1–30 , 1–31 hard drive, internal displaying amount of free space on 8–11 space required for Hibernatio.
Index–4 Hard war e Guide Index K keyboard light 1–7 , 1–8 keyboard, external (optional) numeric keypad 2–13 USB connection 6–3 keypad keys 1–14 , 1–15 keypad, numeric 2–13 keys Fn 2–.
Index Hard war e Guide Index–5 country-specific adapter 1–34 , 7–5 settings 7–6 Modem approval label 1–32 modem cable 1–34 monitor, external (optional) connector 1–20 , 1–21 switching .
Index–6 Hard war e Guide Index Q Quick Launch buttons assigning 2–12 function 1–11 R RAM (Random Access Memory) 8–11 regulatory information Modem approval label 1–32 System label 1–32 wire.
Index Hard war e Guide Index–7 U USB connectors 1–23 , 1–26 , 1–29 USB devices (optional) connecting 6–2 enabling 6–3 V VCR (optional), audio-out jack function 5–4 vents 1–20 , 1–21 .
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) NX9110 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) NX9110 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) NX9110 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) NX9110 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) NX9110 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) NX9110 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) NX9110 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) NX9110. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) NX9110 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
