Benutzeranleitung / Produktwartung LQH-HW 3ULQWHUV des Produzenten HP (Hewlett-Packard)
Zur Seite of 304
/LQH-HW3ULQWHUV User’s M a n u a l.
.
/LQH-HW3ULQWHUV User’s M a n u a l.
READ THIS SOFTW ARE LI CENSE AGREEMENT BEFORE US IN G T H IS P R I N T E R Software License Agree ment CAREFULLY READ THE FOLLOWING TERMS A ND CONDITIONS BEFORE U SING THIS PRINTER. USING THIS PRINTER INDICATES YOUR ACCEP T ANCE OF THESE TERMS AND CONDITIONS.
Limited Software Produc t W arranty Hewlett-P ackard warrants that for ni nety (90) days af ter delivery, the Sof tware will per form in acco rdance with specifica tions publi shed by H ewlett-Packar d. Hewlett-P ackard does not warrant that the Software is free from all b ugs, errors a nd omissio ns.
U.S. Governm ent Restricted Rights Use, dupl ication or dis closure by the Government i s subject to res trictions as set forth in the Rights in Technical D ata and Comp uter Software cla use at FAR 242.227 -7013, subdi vision (b) (3) (ii) or subpa ragraph (c) ( 1) (ii), as appropria te.
4. HP produ cts may contai n manufactured parts equi valent to new i n performanc e or may have been subjec t to incide ntal use. 5. The warra nty period beg ins on the dat e of delivery or on the date of install ation if instal led by HP.
T rademark Acknowledgment s Hewlett-Packa rd, HP, HP-UX, Bi -Tronics, HP in a c ircle, Hewlett Packa rd, PCL and HP rounded recta ngle are regi stered tradem arks, and L ineJet is a trademark of Hewlett-Pa ckard Company .
Novell a nd NetWare are registered trad emarks of N ovell, Inc. PostSc ript is a reg istered trademar k of Adobe Sy stems Inc. Solari s is a regist ered trademark of Sun Micros ystems, Inc. Ultrix is a registered trademark of Digital Equipme nt Corporation.
.
Table of Contents 1 Introduction ....... . ....... ....... .. ....... ...... ....... ....... .. .... 19 About This Manua l .............. ...... ...... ....... ...... .................... ...... ....... ...... . 19 Warnin gs, Cautions, An d Notes ....
Table of Contents Changing P arameters .. .......................... .......................... .................... 48 Exampl e ... .......................... .......................... .......................... ....... 48 Saving Your New Configurat ion .
Table of Contents 5 A pproaches To Network Printing ..... ............ ..... 129 Overview ... .......................... ................... .......................... .................. 129 Peer To Peer Ne tworks ............ ........................
Table of Contents Windows Tr oubles hooting Tips .................... .......................... ............ 163 LineJet Print Server Ca rd Cannot Be Found O n The Network ... 163 HTML Configu ration Forms Will Not Display ...... ....................
Table of Contents Novell Trouble shooting Tips .................. .......................... .................. 19 3 NetWare 3.x - No PSERVER Conn ection .......... ......................... 19 3 NetWare 4.x - No PSERVER Conn ection ......... ........
Table of Contents 13 Extra Fea tures . .......... ......... .......... .......... ........ 235 LineJet Pr int Server Securit y .... ................... .......................... ............ 235 Users And Passwords .. ...... ....... .................
Table of Contents B Paper Specification s And Forms Design .......... 275 Introductio n ..... .......................... .......................... .......................... ..... 275 General P aper Specifica tions ... .......................... ....
Table of Contents.
19 1 Intr oduction About This Manual This manual explains how to confi gure and perform routine service on the HP LineJet printer for ma ximum efficie ncy.
20 Chapter 1 About This Manual • Command s yntax and exam ples are fo rmatted as foll ows: • The Courie r font in boldface i ndicates com mands that yo u type: Example: $ ping ftp.HP.com • Regula r Courier fon t indicates displayed results: Example: ftp.
The LineJet Printer Family 21 Printer O verview The Lin eJet Prin ter Family The LineJet series of lin e matrix printer s consists of 500, 1000, and 15 00 lines per minu te (lpm) models packaged i n various co nfigurati ons. All of the models offer so ftware versatili ty and the lates t refinements i n line matrix prin ting technolo gy.
22 Chapter 1 Print er Overview Figure 1. The LineJe t Printers 55flcab2 April 3, 2000 C3202D C3204D C3205D C5640D C3201D.
Taking Care Of Y our Prin ter 23 T aking Care Of Y our Printer Your prin ter will prod uce high qual ity print job s if it is well taken care of. Period ic cleanin g, handling th e printer p roperly, and using the co rrect print er supplie s, such as paper and r ibbons, wil l ensure op timum perfor mance.
24 Chapter 1 Print er Overview Output Control Depending on the activ e emulation, the p rinters hav e the followin g output control features: • Four mode s for printing text: 1. Correspon dence (H igh Density) 2. Data Proc essing (DP) ( Standard Dens ity) 3.
Graphics Options 25 Graphics Options The PGL an d QMS emulatio ns allow you to create and sto re forms; ge nerate logos, b ar codes, and e xpanded cha racters; and cr eate other grap hics. Alphanum erics and bar code data a r e added as the form is print ed.
26 Chapter 1 Print er Overview Line Matrix Printing Your prin ter is an impa ct printer ; it creates c haracters by pri nting ink do ts on paper. The dots are prin ted on an inv isible matrix m apped in printe r memory (see Figure 2). Dot i mpressions are m ade by an ar ray of steel ha mmers mounted on a rapidly os cillating shu ttle.
Printi ng Sp eed 27 After a lin e of characters is pri nted, the paper ad vances to the fi rst dot row of the next p rint line. This creates a num ber of blank rows between line s of charac ters, depend ing on the pr int mode and l ine spacing y ou sele cted.
28 Chapter 1 LineJet Pr int Server LineJet Print Server The LineJet Prin t Server allows yo u to attach printe rs on a local area network (LAN) rat her than attac hing them dire ctly to a host s ystem.
Print S erver Interfac e 29 Print Serve r Interface The LineJ et Print Server interface ca rd at the rear of the printer h as two indicat or lights and t wo dipswitch es, as shown in Figure 4. Figure 4. Status Indic ator Lights an d Dipswitches Run and Auto Reset Modes Run Mode i s the normal op erating sta te of the LineJ et Print Server .
30 Chapter 1 LineJet Pr int Server Network Indicator The NET LED d isplays the stat us of the network li nk. When the NE T LED is on, link inte grity is confi rmed. The NET LED fl ashes off for 1/3 s econd when a data pack et is being trans ferred. When the N ET LED is off, the n etwork conne ction has be en severe d.
31 2 Downloading Function Code In LineJet Printers Introduction Downloadi ng the functio n code is eq uivalent to updating firmwar e in the printer. Thi s chapter explains how to load functio n code into L ineJet printers .
32 Chapter 2 Introduction Prep ara tion For Downloading There are s everal functi on code file s available f or the LineJet printers. Th e file you use depends on the model n umber of the printer and the printer e mulation in use. The latest version of fun ction code includes softw are trouble r eport fixes an d may con tain addition al features.
Preparation For Dow nloading 33 Copying Functi on Code T o Y our Computer In order to download fun ction code to a printer if using a serial or par allel port, the fun ction code file must resi de in .
34 Chapter 2 Loading Function Code To Flash Memory In The Print er Loading Functi on Code T o Flash Memory In The Printer This sec tion contai ns two loadin g techniq ues: • How to load function co de through the par allel or serial port of th e printer.
Loading Code Through The Parallel Or Serial Port 35 RS232-38 .4K (RS-232 s erial, 38400 b aud) RS232-11 5K (RS-232 s erial, 115000 b aud) RS422-96 00 (RS-422 se rial, 9600 baud ) RS422-19 .2 (RS-422 se rial, 19200 bau d) RS422-38 .4K (RS-422 s erial, 38400 b aud) RS422-11 5K (RS-422 s erial, 115000 b aud) 12.
36 Chapter 2 Loading Function Code To Flash Memory In The Print er 15. If you had to install a data cable to the computer a nd printer in ste p 5, discon nect it from the computer and printer. 16. Using the configurat ion printout(s ) you made in step 1, rec onfigure the printer.
Loading Code Through The Ethernet Port Using ftp 37 8. Log in to t he printer and at the user p rompt type: root <Return> Default is no password. If the ftp progra m prompts you f or a passwo r d, contact the system admi nistrator. 9. When you are logged in, type the fo llowing sequen ce at the DOS prompt to do wnload filename .
38 Chapter 2 Loading Function Code To Flash Memory In The Print er.
39 3 Configuring The Printer Overview This chapt er is a tutorial tha t explains how to con figure the LineJet printer and LineJet Print Ser ver. Configuring Th e Printer In order to print data, th e printer mus t respond corre ctly to signa ls and commands received from the host com puter.
40 Chapter 3 Configuring The Printer Figure 5. The Control Panels 55ops pnl April 3, 2000 DOWN PREV UP SET TOF ENTER FF VIEW CLEAR ON LI N E NEXT SHIFT LF Messa ge Display S tatus Indicato r Secondary Keys (Raise the printer cov er to ac cess the se keys.
41 Figure 6. Configuration Menu Overview OFFLINE CONFIG. CONTROL page 71 ACTIVE EMULATION 1 page 73 EMULATION page 74 MAINT/ MISC page 109 HOST INTERFACE page 110 Load Config. Save Config. Print Config. Delete Config. Power-Up Config. Protect Configs.
42 Chapter 3 Configuring The Printer Operating Mode s The printe r has two oper ating modes: online and off line. When th e printer is online, i t is controll ed by the host c omputer and pr ints data se nt by the hos t computer.
Changing And Saving Parameter Settings 43 Chang ing And S aving Paramet er Sett ings You can change a p arameter setti ng, such as line spacing or forms l ength, by pressi ng keys on the control panel or by s ending emula tion cont rol codes in the host d ata stream.
44 Chapter 3 Configuring The Printer Factory Defa ult Configuration V alues The fact ory default values ar e permanently stored in m emory as a configur ation and c annot be modifi ed or erased. The configurati on values f or the Bi- T ronics paralle l interface and Print Serv er (Ethernet) i nterface are display ed on the followi ng pag es.
Factory Default Configuration Values 45 Font Attributes Typeface Data Processing Prop. Spacing Disable Bold Print Disable Italic Print Disable Slashed Zero Disable Page Format Form Length Abs. Length IN 11.0 inches Abs. Length MM 279.4 mm Funct. of lines 66 lines Form Width Abs.
46 Chapter 3 Configuring The Printer Print Server (Ethernet) Interface ACTIVE EMULATION PCL-II PCL-II Primar y Char. set ID 0 Symbol Set Roman-8 [8U] Pitch 10.00 Density Data Processing Second Char. set ID 0 Symbol Set Roman-8 [8U] Pitch 10.00 Density Data Processing Page Length Rep.
Factory Default Configuration Values 47 Page Format Form Length Abs. Length IN 11.0 inches Abs. Length MM 279.4 mm Funct. of lines 66 lines Form Width Abs.
48 Chapter 3 Changing Parameters Changing Parameters A config uration con sists of sev eral parameters . The factory c onfiguration i s PCL-II em ulation usi ng the Bi-Troni cs interface.
Example 49 3. Allows yo u to make configuration changes . 4. 5. 6. 7. Cycle t hrough the c hoices. 8. An asterisk (*) indicates this choice is active . TO SA VE YOUR CHANGES AS A CONFIGURA TION THA T IS STORED IN ME MOR Y : 1. 2. 3. Go to th e CONFIG .
50 Chapter 3 Changing Parameters Saving Y our New Configuration A config uration mus t be saved in o rder to load i t later. You can save up to eight con figurations to meet differe nt print job requi rements.
Saving Your New Configuration 51 T able 6. Savi ng Configurations Step Key Result Notes 1. Make s ure the printe r is on. Raise the printer cov er (on cabine t models). 2. 3. Allows yo u to make configuration changes . 4. 5. 6. 7. Press until the de sired numbe r (1-8) displ ays.
52 Chapter 3 Changing Parameters Printing Th e Cur rent Configurat ion The configura tion printout li sts the stored par ameters. You can prin t any or all of the con figurations s hown above. Co nfigurations 1- 8 are the cus tomized configur ations. To print a configuration , follow the pr ocedure in Tab le 7.
Printing The Current Configuration 53 T able 7. Printing Configurat ions Step Key Result Notes 1. Make s ure the printe r is on. Raise the printer cov er (on cabine t models). 2. 3. Allows yo u to make configuration changes . 4. 5. 6. 7. Press until the de sired optio n disp lays.
54 Chapter 3 Changing Parameters Loading Co nfiguration V alues You ca n load a ny of the eight cust omized co nfiguration s or the factory defau lt configur ation, Config uration 0. Its l ist of paramete rs begins on p age 44. The loaded configuration remains acti ve as long a s the printer is on.
Loading Configuration Values 55 T able 8. Loading Configurations Step Key Result Notes 1. Make s ure the printe r is on. Raise the printer cov er (on cabine t models). 2. 3. Allows yo u to make configuration changes . 4. 5. 6. Press until the de sired numbe r (1-8) displ ays.
56 Chapter 3 Changing Parameters The Power -Up Configuration When you powe r on the printer for the first tim e, it loads config uration 0 which is the fac tory default c onfiguration.
The Power-Up Configuration 57 T able 9. Setting The Power-Up Configuration Step Key Result Notes 1. Make s ure the printe r is on. Raise the printer cov er (on cabine t models). 2. 3. Allows yo u to make configuration changes . 4. 5. 6. 7. Press until the de sired numbe r (1-8) displ ays.
58 Chapter 3 Changing Parameters Deleting Configuratio ns You can d elete any o f your cust omized confi gurations . You cannot, ho wever, delete the configurat ion 0, which i s the factory pr eset configur ation. The Protect Co nfigs. param eter must be set to disable befo re you may delet e a configu ration (see p age 60).
Deleting Configurations 59 T able 10. Deleting Configurations Step Key Result Notes 1. Make s ure the printe r is on. Raise the printer cov er (on cabine t models). 2. 3. Allows yo u to make configuration changes . 4. 5. 6. 7. Press until the de sired numbe r (1-8) displ ays.
60 Chapter 3 Changing Parameters Protecting Y our Configurations In order to save or del ete a config uration you mus t set the Prote ct Configs. opti on to disa ble. CONFIG. CONTROL Load Config. Save Config. Print Config. Delete Config. Power-Up Config.
Connecting To The Network 61 Configuring The Prin t Server Connecting T o The Network To attach th e LineJet Pr int Server ca rd to a network , plug the netwo rk cable into the Li neJet Pri nt Server conne ctor (see Figu re 7). Watch the LEDs in the rear of the printe r as they cy cle through the power on self-te st.
62 Chapter 3 Configuring The Print Server 2. Configuring a host wit h a new printer so it knows how to send data to the LineJet P rint Server. J ust being able to see the pr inter on the net work does not m ean you can automatical ly print to it. A host has t o be told where to sen d the data.
Configuration Using The Printer Control Panel 63 8. Press the LEFT or RIGHT ar row key to se lect the portio n of the IP Addres s to be chang ed. 9. P r ess the DOW N ar r ow key. 10. Press the LEFT or RIGHT ar row key to se lect the desir ed value. 11.
64 Chapter 3 Configuring The Print Server Config uratio n Alter nativ es Besides the HTML form s and software p rovided, the Li neJet Print S erver internal command shel l, npsh, can al so be reach ed using the following method s.
Configuration Alternatives 65 2. Make sure your ne twork statio n can succ essfully ping the LineJ et Print Ser ver ov er the ne twor k. 3. Direct you r Web browser to the Uniform Resource Loca tor (URL) http:// IPaddress (e.
66 Chapter 3 Configuring The Print Server.
67 4 The Configuration Menus Overview Once you h ave famili arized yoursel f with the config uration proce ss using the tutorial info rmation in Chapter 3, you are ready to c omplete your con figuration of the pri nter. This chapter provides de scriptions for each param eter provide d by the configur ation menus .
68 Chapter 4 Configuration Main Menu Configuration Main Menu Figure 9. Configuration Main Menu OFFLINE CONFIG. CONTROL (see page 71) ACTIVE EMULATION 1 (see page 73) EMULATION (see page 74) MAINT/ MISC (see page 109) Load Config. 0* - 8 Save Config. 1* - 8 Print Config.
69 Figure 9. Configuration Main Menu (continued) HOST INTERFACE (see page 110) ETHERNET PARAMS (see page 120) Bi-T ronics * Pr i me Si gnal Disable* Enable TOF Action Reset* Do Nothing Buffer Size in K 1* (1-16) Centronics Data Bit 8 Enable* Disable PI Ignored Enable* Disable Data Polarity Standard* Inve rted Resp.
70 Chapter 4 Configuration Main Menu The first-l evel configur ation menu o ptions are briefl y described be low: • CONFIG. CONTROL . Allows y ou to save, print, loa d, and delete e ntire sets of c onfiguration p arameters. Thes e options are described brie fly in this ch apter and co vered in detai l in Chapter 3.
71 Config. Control Menu The CONFI G. CONTROL menu manages con figurations, wh ich are groupin gs of parameter values that c an be stored in printer me mory. Brief descripti ons follow f or each option. Load Config. The printe r can store u p to eight uni que configurati ons in memory .
72 Chapter 4 Config. Control Menu Save Config. This opti on allows you to save up to eigh t unique con figurations to meet differen t print job req uirements, whi ch eliminat es the need to ch ange the paramete r settings for each new job. The config urations are stored in memo ry.
73 Act ive Emula tion Menu The ACTIVE E MULATION menu de termines what e mulations are av ailable. • PCL- II . The default. The PCL-II emu lation is acti ve.
74 Chapter 4 Emulation Menu Emulation Menu The EMULATIO N menu is th e gateway to c onfigure the em ulations av ailable with the Li neJet prin ter. The control codes for eac h of these emu lations are described i n their respective Technica l Reference Manuals .
PCL-II Emulation 75 PCL-II Emulation EMULATI ON (from page 74) Primary Char. Set Secondary Char. Set Graphics Density Display Functns LPI Adjust Page L. / Lines Page L. / Inches Config. Print ID 0* - 109, xx Symbol Set (see next page) Pitc h 10*, 12, 13.
76 Chapter 4 Emulation Menu Pri mar y Char. set (from previous page) Symbol Set Roman-8[8U]* Turkish-8[8T] Arab-8[8V] Cyrillic[8R] PC858 MtLi[13U] MC Te xt[12 J] Roman-9[4U] Latin-9[9N] Win3.0Lat-1[9U] Japan Postnet Katakana Post ASCII[0U] Math Sym[0A/0M] LineDraw[0B/0L] IS0 Den/Nor[0D] Roma n Ex t.
PCL-II Emulation 77 Primary Char . set You can select o ne of 92 pre-de fined chara cter sets by ID (althou gh character sets ra nge from 0 - 10 9, not all se ts are availa ble on the Lin eJet printer), o r you ca n select pitch , symbo l set, and typefac e individua lly.
78 Chapter 4 Emulation Menu Display Functns • Disable . The de fault. Control c haracters are not p rinted. • Enabl e . Control charac ters are printed b efore they get exec uted. This is a useful de bugging tool . Line T erm inator You can specify wha t will be use d to indicate th e end of a l ine.
PCL-II Emulation 79 Page L. /Inches This parame ter allows you to set phy sical page leng th from 2 to 16 inches, in increm ents of half a n inch. The def ault is 11 inc hes. Config. Print This opti on prints the em ulation’ s para meters and the c urrently selec ted valu es.
80 Chapter 4 Emulation Menu LP Plus Emul ation EMULATION (from page 74) Printer Protocol Print Char. Set Font Attributes Page Form at Typeface Data Processing* NLQ OCR-A OCR-B High Speed NLQ Sans Serif Prop.
LP Plus Emulation 81 Printer Protocol Select t he LinePrinter + protocol you wish to use. Refer to the PCL-II/ LinePr inter Plus T echn ical Reference Ma nual for more informati on . Print Char . Set When this selection i s displayed a nd the ENTER ke y is press ed, the current charac ter set is prin ted.
82 Chapter 4 Emulation Menu Bold Print • Disable . T ext is print ed normally . • Enabl e . T ext is p rinted with a he avy line th ickness. Italic Print • Disable . T ext is print ed normally . • Forward Slant . T ext is printed with a fo rward slant.
LP Plus Emulation 83 Reset Cmd CFG Ld When the p rinter rece ives a host da ta stream reset c ommand in add ition to resetting p rinter vari ables, the sel ected config uration will be loaded. • Disable . The printer igno res the reset comm and when it is received and c ontinues to use the currently loaded con figuration.
84 Chapter 4 Emulation Menu P-Seri es Emulation Printer Protocol (from page 80) Control Code 06 Control Code 08 Define CR Code Auto LF Overstrike Define LF Code Select SFCC E VFU Sel ect A lt. S et 80-9 F Character Set SFCC d Command 8.0 LPI* 10.3 LPI 6.
P-Series E mulation 85 Control Code 06 Control C ode 06 defines the function of ASCII code he x 06 (ACK). Y ou ca n select an alternate line spacing of 6, 8, or 10.3 LPI . Control Code 08 Control C ode 08 defines the function of ASCII code he x 08 (BS).
86 Chapter 4 Emulation Menu • ETX (hex 03 ) • CIRCUMFLEX (hex 5E)—also call ed caret (^) • TILDE (hex 7E )—(~) EVFU Select Controls how the printer handles ver tical formatti ng. • Enabl e . Enable s the VFU and s elects P-Seri es compatible E lectronic V ertical Format Unit (EVFU).
Proprinter XL Emulation 87 Proprin ter XL Emulation Define CR Code This opti on controls th e action of the pr inter when it r eceives a Carr iage Return co de (hex 0D) fr om the host co mputer .
88 Chapter 4 Emulation Menu Auto LF This opti on defines the pr inter actions when print data is received past th e forms width se tting. • Enabl e . Perform s an automati c carriage return and line feed whe n data is received p ast the fo rms width.
Epson FX Emulation 89 Ep son FX Emulation Printer Prot ocol (from page 80) Define CR Code Auto LF Define LF Code Printer Select Character Set 20 CPI Condensed A lt.
90 Chapter 4 Emulation Menu Define CR Code The Define CR Code optio n controls th e action of the printe r when it receives a Carriage Return code (hex 0D) from the host c omputer . If this f eature is enabled, e ach time the printer receiv es a Carriage Ret urn, it ins ert s an additiona l Line Feed c ode (hex 0A) int o the data stream .
Epson FX Emulation 91 20 CPI C o ndensed Condensed print char acters are narrow er than the nor mal characte r set. This is helpf ul for app lications f or which yo u need to prin t the maximum amount of informa tion on a page.
92 Chapter 4 Emulation Menu Serial Matrix Emulat ion Control Code 06 Control C ode 06 defines the function of ASCII code he x 06 (ACK). Y ou ca n select an alternate line spacing of 6, 8, or 10.3 LPI . Define CR Code This opti on controls th e action of the printer when i t receives a Car riage Return co de (hex 0D) fr om the host com puter .
Serial Ma trix Emulation 93 Overstrike This opti on enables you to print bold characters. • Enabl e . T urns on bold print . When ena bled, overstrik e printing sl ows down th e printer . • Disable . Turns off bold print. Define LF Code • LF = LF .
94 Chapter 4 Emulation Menu Serial Matrix Character Set Menu * = Factory Default IBM PC* Multinational ECMA Latin 1 DE C Mult. Primary S ubset ASCII ( USA)* French German English Danish Swedish Italia.
P-Ser ies XQ Emulat ion 95 P-Series XQ Emulation Control Code 06 Control C ode 06 defines the function of ASCII code he x 06 (ACK). Y ou ca n select an alternate line spacing of 6, 8, or 10.3 LPI . Define CR Code This opti on controls th e action of the pr inter when it r eceives a Carr iage Return co de (hex 0D) fr om the host co mputer .
96 Chapter 4 Emulation Menu • LF = LF . Does not perform an automatic c arriage return when a line feed command is received . The next print p osition will b e the current p rint positio n of the next l ine. Compressed Print Controls which host command sets c ompresse d printing.
IGP/PGL Emulation 97 IGP/PGL Emulation The IGP/P GL emulatio n can be config ured either thr ough the printe r’s front panel or from the host computer wi th control co des. For a de tailed descript ion of config uration with control codes , see the PGL Pr ogrammer’s Reference Manual.
98 Chapter 4 Emulation Menu Define LF Code (Line Feed) This param eter forces the printe r to insert an automatic Carriage Return code into the da ta stream wh enever a Line Fe ed code occur s. This can be u sed in most inst allations, but it is requ ired if the hos t computer do es not send Carriage Re turns to the print er.
IGP/PGL Emulation 99 Select Font This parameter allows you to s elect a font for the IGP/PG L feature. The default i s 0, which is U. S. ASCII. The fol lowing val ues are valid choi ces: 0 U.
100 Chapter 4 Emulation Menu Ext Execute Copy • Disable . Dyna mic data, overlay data, etc. are n ot allowed if the optional Form Count parameter (nu mber of forms t o print) is specified as p art of the Exec ute command. (This setting is IGP-100 c ompatible.
IGP/PGL Emulation 101 IGP100 Comp atbl. This opti on instructs the IGP/PGL to behave simila rly to the IGP -100 with respect to certain co mmands. All ne w users with ne w applicatio ns should select the Disable o ption. Selectin g this mode i nsures the pri nter will behav e as desc ribed in this manual.
102 Chapter 4 Emulation Menu IGP/VGL (Code V) Emulation The IGP/V GL (Code V) e mulation ca n be configured either through the printer’s front panel or from the host c omputer with co ntrol code s. For a detailed de scriptio n of configurati on with control codes , see the QMS Cod e V Technica l Reference Man ual.
IGP/VGL (Code V) Emulation 103 SFCC & Pwrup This opti on has severa l suboption s which define t he SFCC and power -up configur ation used with Code V . SFCC This option s elects the Special Func tion Control Cod e. The default value i s the care t ^ (decimal 94 ).
104 Chapter 4 Emulation Menu Free Format • Disable . The de fault. • Enabl e . Selects free for mat mode as the power-up de fault, and selec t s the graph ics mode ^P Y as the power-up default. Free format causes the Code V to i gnore carriag e returns, lin e feeds, and a ll characters below hex 20 sent from the host.
IGP/VGL (Code V) Emulation 105 T runcate Alpha When enab led, this param eter prevents the printing of Er ror 48 (Ele ment Off Page Er ror) if alphanu meric data, inclu ding spaces, extends beyond the r ight side of t he form. Tr u e Ve r t 1 / 1 0 • Disable .
106 Chapter 4 Emulation Menu Midline PY (includes ^PN) • Disable . The G raphics mode Enable com mand, ^PY , must be the first three ch aracters of a li ne. • Enabl e . T he ^PY or ^PN can o ccur anyw here in a lin e. Convert to U/C • Disable . Lowe rcas e charact ers are pr int e d normal ly .
IGP/VGL (Code V) Emulation 107 Offp age Errors • Disable . Does not report error s for elements that st art or end beyond the right ed ge of the page. • Enabl e . Reports errors f or elements that start or end beyo nd the right edge of the p age. Barcode Errors • Enabl e .
108 Chapter 4 Emulation Menu ISO Char Set This paramet er allows you to select a font for the IGP/VG L (Code V) fea ture. The default is 0, which is U.
Maint/Misc Menu 109 Maint/Misc Menu Maint/Misc Me nu Hex Dump Mode A hex code pr intout (or hex du mp) translates al l incoming data to hexadecim al equival ents. A hex dump lists each ASCII da ta characte r received f rom the host com puter togethe r with its corr esponding two - digit hexadeci mal code.
110 Chapter 4 Host Interface M enu Host Interface Menu The Host Inte rface Menu Diagram enab les you to selec t and configu re an interfac e between the p rinter and yo ur host compute r: • Bi-Troni.
Bi-Tronics Submenu 111 Bi-T ronics Submen u Prime S ignal • Disable . The pa rallel port d oes not perfor m a warm start (r eboot) if the host asser ts the prime s ignal. • Enabl e . The parall el port performs a warm start ( reboot) if the host assert s the pri me signal.
112 Chapter 4 Host Interface M enu Centronics ( Para llel) Submenu The Centron ics submenu p rovides the o ptions and setti ngs availa ble to configur e the interfac e as required for your applic ation. These o ptions and availab le settings ar e outlined i n the followin g paragraphs.
Centronics (Parallel) Submenu 113 Dat a Polarity The Data Polarity parame ter must be set to match t he data polarity of your host com puter. • Standard . Does not expect the ho st computer to invert the d ata. • Inverted . E xpects the d ata received on the data li nes from the hos t compu ter to be inver ted.
114 Chapter 4 Host Interface M enu Serial Submenu The serial submenu a llows you to choos e the config uration of th e Serial host interfac e type, as shown above .
Serial Submenu 115 Dat a Protoc ol You can se lect one of the foll owing serial int erface protocols to meet the hos t interfac e require ments. • XON / XOFF . The defau lt. The printer controls the flow of communic ation from the hos t by turning the transmission on a nd off.
116 Chapter 4 Host Interface M enu S top Bit s Sets the num ber of stop bits in the serial data wor d. Either one or two stop bits can be sele cted. The setting must matc h the correspondin g stop bit setting in the host c omputer. The d efault is 1 bit.
Ethernet Submenu 117 Ethernet Submen u The Ether net interface al lows you to locate the prin ter on a LAN rather than attach the hos t directly i nto the printer . Buffer Size in K This opti on configures the amount of m emory alloca ted for the Et hernet buffer .
118 Chapter 4 Host Interface M enu Auto Swit ching Submenu Auto Switching Gives the printe r the ability to handle multiple data streams se quentially . With Auto Sw itching, the printer c an service h osts attached to the serial and parallel por t s as if th ey were the onl y interface c onnected.
Auto Switching Submenu 119 T ric kle T ime When the p rinter is printing d ata from a host an d a seco nd job is rec eived by the prin ter from a different host, T ri ckle T ime prevents the second host from timing ou t while it is waiting for its data to be p rinted.
120 Chapter 4 Ether net Params Menu Ethernet Params Menu The ETHERNET P AR AMS menu hel p s your printer communicate o n a network. For informa tion on assi gning the IP Address, Gat eway Address, S ubnet Mask, an d MAC Addre ss, refer to “ Methods Of Adjusti ng Paper Po sition” on page 145.
Printe r Control 121 Printer Control Menu The Prin ter Control Men u allows yo u to choose th e printer’s behavior. O ptions on this m enu, as shown be low, are des cribed in the f ollowing pag es. Printer Co ntrol Un idire ctio nal The Unid irectional fe ature affects bo th print qualit y and printing speed.
122 Chapter 4 Printe r Control Men u • Enabl e . The printer wi ll print all d ata in only one direction of the shuttle sweep (unidirecti onal printi ng). This choi ce produce s higher pri nt quality. PMD (Paper M otion Detection) Fault • Enabl e .
Diagnostics 123 Diagnostics Menu The diagno stics menu al lows you to cho ose the diagn ostics tests to be run and prov ides you with im portant system information. Options on this menu, as shown bel ow, are desc ribed in the fo llowing pages. Diagnostics Printer T ests The printe r tests are u sed to check th e print quality and printer operation.
124 Chapter 4 Diagnostics Menu • All E’ s . A patter n of all upp ercase E’s that i dentifies mi ssing cha racters, misplac ed dots, sm eared charac ters, impr oper phasing problems , or light/ dark char acter variatio ns.
Diagnostics 125 T est Wid th This parame ter permits y ou to run the self-tests at full width or 80 columns. Paper Out Dot s It is reco mmended th at only a Hewlett- Packard Cus tomer Servic e Engineer set th is parameter.
126 Chapter 4 RibbonMinder RibbonMinder RibbonMi nder is a user- definable s oftware feature wh ich notifie s the user when a r ibbon sho uld be chang ed. It doe s this by monitoring i nk consumpti on and aler t s you when the print q uality falls below a l evel you designate.
RibbonMinder Menu 127 RibbonMind er Menu Ribbon Size The standa rd ribbon size is 60 yard s. You can use the Ribbon Si ze option to specify the ribbon le ngth in one-y ard increments , with a maxi mum of 255 yar ds. Ribbon Adjust Adjusts the number of pages printed before the dis play reaches 0%.
128 Chapter 4 RibbonMinder.
129 5 Appr oaches T o Network Printing Overview Configur ing your net work printing is based on the networ k protocols and h ost environme nts you alread y use or plan to use. It is common to fin d multiple network protocols co -existing in the sa me network.
130 Chapter 5 Overview Print Job Serve rs In most l arger networks, print jobs us ually are man aged by desi gnating one protoco l and method fo r print ing and then de signating spe cific compute rs as print job se rvers, rather than by direct ing any host running any protocol to the networke d printer resou rce.
131 6 TCP/IP Configuration TCP/IP LineJet Print Server Configuration This conf iguration pro cedure assumes you have an existing networ k and TCP/IP attac hed to a Windows 95/98/NT, Unix, or ot her machine.
132 Chapter 6 TCP/IP LineJet P rint Server Configuration Creating Alia ses All TCP/IP systems ar e designed t o make mul tiple operatio ns easy by usi ng an alias , which is a lo gical name to IP/MAC addres s associati on.
Methods For Setting TCP/IP Values 133 Methods For Set ting TCP/IP V alues Methods a vailable to set TCP/IP value s vary base d the operati ng environme nt (see Table 11). • arp . Easy to us e but ca nnot be routed, so printer and ho st computer mus t be on sam e network segm ent.
134 Chapter 6 TCP/IP LineJet P rint Server Configuration Assign TCP/IP V alues Method 1: Using the Prin ter Control Panel All of the basi c TCP/IP value s can easily be set and s tored in the LineJe t Print Server via the printer front panel under the ETHERNET PARAMS menu.
Assign TCP/IP Values 135 For Window s 95/98/NT or OS/2, ope n a DOS window. For AS/40 0, start from a comman d prompt. For Unix, start from a terminal ses sion prompt: telne t xxx.
136 Chapter 6 TCP/IP LineJet P rint Server Configuration Now power t he printer up, and wait a min ute or more for the LineJet Pr int Server to obtain the add ress above.
Using BOOTP 137 Web Browser Initiate t he Web brows er and enter th e IP Address or host s table nam e in the URL line. Click on “Con figuration.” Log in as root , no passw ord. Enter th e values you n eed for subn et mask and gate way and clic k “Submit.
138 Chapter 6 TCP/IP LineJet P rint Server Configuration 2. Turn the Li neJet Print S erver on so that it immediate ly sends out a BOOTP request. Wa it one minute to allow the IP address assig nment process to complete.
139 7 HP e3000/LineJet Print Server Configuration Overview This chapter details the HP e3000 Host Con figuration set up and the HP e3000 L ineJet Print S erver Config uration setup.
140 Chapter 7 HP e3000 / MPE-XL / MPE / iX: Host Configuration g. at the SYSGEN prompt , enter the co mmands: SYSGE N> keep SYSGE N> exit h. to have th e new configu ration take effe ct, reboot the system wit h the comm and, start norecovery . It is also possibl e to configure the device onl ine by usi ng the command, ioconfig .
141 c. set d est d1prn b ackchann el prn save list des t (this wi ll allow yo u to see your c hange) exit 5. The npconf ig file is rea d each time t he printer co mmands spool er nn ;start or start spool nn are used , meaning if cor rections are needed to t he file it is not necess ary to restart the HP e3000, on ly the spooler .
142 Chapter 7 LineJet Print Server Configuration Verification LineJet Print Server Configuration V erifi cation 1. Print th e Current Config uration in the p rinter and ve rify the insta lled Function C ode (minimu m version 356 351, Version 2.07P or later ).
143 c. Place th e printer onl ine and wait for t he front panel to display “E- Net Ready.” T his will write the Gateway add ress to the network I/F NvRam. d. Take the pr inter offline and enter the desired Gatew ay address. e. Place th e printer onl ine and wait for t he front panel to display “E- Net Ready.
144 Chapter 7 LineJet Print Server Configuration Verification The line setup_file = filename is th e file that c ontains cust omized setu p strings to specify the p rinter ope rating mode f or this logical device. This file must be an unnumbered fi le.
Method 1 145 Methods Of Adjusting Paper Position When the HP e3000 s pooler is ac tive and th e paper need s to be ad justed (the print is too far up or too far down on the page) or repl aced, use o ne of the methods b elow to set the paper posi tion.
146 Chapter 7 Using Page Level Recovery On LineJet Pri n ters Using Page Level Recovery On LineJet Printers The native mode spo oler on MPE /iX 5.5 (and later) suppo rts Page Le vel Recovery (PLR). PLR prov ides the abi lity to restart p rinting at any page of a document due to device p roblems or a suspended s pooler.
Method 2 147 Becaus e LineJet prin ters are typi cally connec ted to the netwo rk with a Print Server i nternal netwo r k card o r JetDirect E X interface, m any of the sp ooler commands (e.g., those de scribed a bove) should be avoided for mid-file suspens ion.
148 Chapter 7 HP e3000 / MPE-XL / MPE / iX: DTC Configuration HP e3000 / MPE-XL / MP E / iX: DTC Configuration MPE-XL / MPE / iX T ypical Configuration Within NM MGR follow t he menu: Open Conf ig DTS.
149 8 W indows Configuration Overview This chapter details a co mplete Windo ws configurati on setup inc luding: 1. Identifyi ng the LineJ et Print Server on the networ k using TCP/IP a s the underly ing protoc ol 2. Configur ing the LineJ et Print Server with its manda tory TCP/IP setti ngs (IP addr ess and subn et mask) 3.
150 Chapter 8 Windows LineJet Print Server Configuration Figure 10. Windows Integration Windows LineJet Print Server Configuration The IP addr ess and subne t mask are mandatory TCP/IP settings and ar e needed bef ore the print s erver can be detected on t he network.
Communicating Across Routers 151 Communicating Across Ro uters Since W indows en vironments rely on TCP/ IP to commun icate with th e LineJe t Prin t Server, c rossing ro uters beco mes an issu e.
152 Chapter 8 Windows LineJet Print Server Configuration Changin g Destination Names When d efining some printers with in Windows e nvironments , the LineJet Print Server r equires that y ou specify a pre-defined de stination r ather than any name you would like.
Windows NT 3.51 Host Setup 153 Windows Host Configuration This section c overs Windows NT and Windows 95 , Windows 3.1 and Prin t ronix Pri n t ing Sy stem (PPS ) new pr inter se tups. Wi ndows NT 3.51 Host Setup To configu re a new printer on a Windows NT 3.
154 Chapter 8 Windows Host Configuration 8. Type in th e name of a pr e-defined desti nation/queue on the Line Jet Print Server i n the second fie ld. 9.
Windows NT 4.0 Host Setup 155 4. At the nex t window, click o n “Add Port ...” 5. Double c lick on LPR Port. If LP R Port is not listed, it me ans that Mi crosoft TCP/IP Pr inting service is not install ed.
156 Chapter 8 Windows Host Configuration 6. In the “Na me or address of server pro viding lpd:” b ox, enter the IP address of the LineJet P rint Server a dapter. In the “Name of printe r or print qu eue on that ser ver:” box, enter d1prn . 7. Select t he “Gener ic/Text only” printer driv er or instal l the LineJe t printer driver.
Windows NT 4.0 Host Setup 157 8. In the “Co py manufactu rer’s files fr om” box, enter the path to the LineJet Utility CD printer drive r folder contain ing the NT driver . Click on “OK .” 9. Click o n the “HP Lin eJet” in the “Pr inters” box, th en click “Ne xt.
158 Chapter 8 Windows Host Configuration 10. In the “P rinter name” box , enter a nam e for this printe r. Click “Next.” 11. Determine i f the printer is sha red with other netwo r k users. If it is sh ared, the shar e name and the operating sys tem must be s elected.
Windows NT 4.0 Host Setup 159 12. Print a Windows test pa ge. 13. If there are any prob lems during or after inst allation, s ee “Windows N T 4.0 Host Setu p Problems” on page 167.
160 Chapter 8 Windows Host Configuration Wi ndows 95/98 Host Setup To co nfig ure a new prin ter on a Wi ndow s 95 stati on: 1. Select “S ettings:Printers” from the Start menu. 2. Double click on the “Add Prin ter” icon. 3. Select “ Network Pri nter” from the se cond window of the Add Pri nter wizard that loaded.
Windows 3.1 Host Setup 161 5. Once your computer is rebooted, open the Setti ngs:Printer s folder to v iew your ex isting printe rs. 6. Select the printer th at you wa nt to use with P PS and cl ick the right mouse button to br ing up a su b-menu. 7. Select “ Properties ” from this m enu to displa y the curr ent settings for this printer .
162 Chapter 8 Windows Host Configuration The most c ommon print method offered wi th Windows TCP stacks is LPR / LPD, a multi- platform remote printi ng protocol used on ever ything from PCs to mainfram es. The LPR pr int setup is very simp listic, in volving on ly two paramete rs: 1.
LineJet Print Server Card Cannot Be Found On The 163 Windows T roubleshooting Tip s This sec tion provides informati on on possi ble solutio ns to some s tandard configur ation erro rs. If you requ ire technic al support, pl ease have as much of the follo wing infor mation as y ou can availa ble when y ou call: 1.
164 Chapter 8 Windows Troubleshooting Tips Errors Occur When Def ining An LPR Printer • Can you ping the LineJ et Print Server from your W indows NT station? If not, refer to the “LineJet Pr int Server Ca rd Cannot Be Found On The Network” sect ion.
TCP/IP Acc ess Problem 165 TCP/IP Access Problem If you ca n ping the prin ter from a works tation, but yo u cannot Web browse, Telnet, or print t o the printer throug h the LineJet Print Serv er, there may be an inco rrect entry in the TCP a ccess list.
166 Chapter 8 Windows Troubleshooting Tips 9. At the sy stem promp t, enter: store tcpip from default confi g http on save reset 10. Power the printer off an d then back o n. 11. Set the IP address, sub net mask, and default gatewa y parameters to the desired v alues.
Windows NT 4.0 Host Setup Problems 167 Wi ndows NT 4.0 Host Setup Problems The instal lation proced ure covered earlier in this chapter assu mes that the LineJet Prin t Server adapter is confi gured w.
168 Chapter 8 Windows Troubleshooting Tips.
169 9 Unix Configuration Overview This chapter details a co mplete Unix setu p includin g: 1. Configur ing the LineJ et Print Server with its manda tory TCP/IP setti ngs (i.e., IP add ress and s ubnet mask). 2. Configur ing the Unix host station with a new printer.
170 Chapter 9 Unix Environment Description Unix Environment Descrip tion The LineJ et Print Server supports netwo rk printing und er various TCP /IP environme nts including all variations of Uni x. Printing can come from multipl e hosts dir ectly or thro ugh central s pooling machin es.
Mandatory 171 Unix LineJet Print Server Configuratio n There are mand atory settin gs needed before th e print server c an be detected on the netwo rk, as well as some addit ional optional settings.
172 Chapter 9 Unix Host Configuration 3. At the Netwo rk Configurati on HTML form th at displays, cl ick in the f irst field bel ow the “Gatew ay” heading an d type in the IP address of the default r outer/gateway fo r the LineJe t Print Server subnet.
Printing Setup On HP- UX 173 Method 2, Command Line The followi ng procedure requires root p rivilege. 1. Assume a print queue ( aka Unix printer ). Quality is desi red. 2. DNS/IP Ad dress name of L ineJet Print Server is MyLi neJet . 3. The dest d4 prn is to be us ed on the Line Jet Print Ser ver.
174 Chapter 9 Unix Host Configuration HP-UX Configuration Guidelines Within S AM follow the menu: Printers and Plotters Printers/Plott ers Printer/P lotter Manag er menu .
Printing Setup On Sys V 175 Printing Setup On Sys V This setup involves any Unix operatin g system using Sys tem V print spooli ng (e.g., SCO, Solaris , DG/UX , Sun 2.
176 Chapter 9 Unix Host Configuration Example 2: Using the dest d1prn (Sun 2.6, 2.7 and Similar) lpshu t lpadm n -p lobby -v/dev/n ull (gives fi le lockin g) lpadmin -p lobby -i/us r/lib/lp/model/netstandard -o protocol=bsd lpadmin -p lobby -sLJ_ PS1!d1prn lpsched enable lobby accept lobby Example 3: Using the raw tcp socket 9100 (Sun 2.
LPR/LPD Printing Se t up On BSD Systems (Sun 4.x, 177 LPR/LPD Printing Setup On BSD Systems (Sun 4.x, DEC ‚ Ultrix ‚ , Free BSD , etc. ) The LineJet Pri nt Server also suppo rts Unix operatin g systems which fol low a BSD print s ystem (e.g., S unOS 4.
178 Chapter 9 Unix Host Configuration 5. Start the printer daemo n for this n ew printer. Exampl e: lpc s tart LPQ100 0 You now ha ve a new prin ter which relies on LPR/LPD to p rint to a Line Jet Print Ser ver printer.
FTP Printing 179 FTP Printing The LineJ et Print Server contains four logical pri nters (destinati ons) labeled as d1prn through d4prn . For FTP printin g, establish an FTP ses sion, followed by a put to th e dest .
180 Chapter 9 Unix Troubleshooting Tips Unix T roubleshooting T ip s This sec tion provides informati on on possi ble solution s to some s tandard configur ation errors. If you require technical su pport, please h ave the following informa tion (or as m uch as poss ible) when you call: 1.
Stair-stepped Output 181 S t air-s tepped Ou tput Stair-st epped output is print whic h starts at the top left of the page but ever y line ther eafter starts a l ittle furthe r over to the ri ght. It also refer s to Unix jobs that prin t one line of text at the top o f a page follow ed by a serie s of blank pages.
182 Chapter 9 Unix Troubleshooting Tips.
183 10 Novell Configuration Overview This chapter details a co mplete Novel l setup, includin g: 1. Identifying the LineJet P rint Server card on the network. 2. Configur ing the LineJ et Print Server with its manda tory print se tup settings . 3. Configur ing a new print q ueue on the file server.
184 Chapter 10 Novel l Environment Description Novell Environment Description The LineJ et Print Server card supports network printi ng under Novel l environme nts by usin g IPX. It suppor ts all 3.1X ve rsions of NetW are. Figure 15 provi des a Novell setup overvie w.
Using HTML Forms 185 Optional Addition al settings are available to fine-tune th e LineJet Prin t Server’s Novell function ality. These opti ons include: • NDS Context .
186 Chapter 10 Novel l Host Configuration To use the HTML forms to d efine a print qu eue, do the fol lowing: 1. Load a Web bro wser on a network station tha t can communic ate with the print s erver over TCP/I P.
NetWar e Version 3.x PSERVE R S e tup 187 7. Select “Pri nt Serv er Informat ion ” and pres s ENTE R. 8. Press INSERT when the list of exi sting print se rvers disp lays. 9. Type the na me of the LineJ et Print Ser ver when prom pted for a print server n ame and press ENTER when done .
188 Chapter 10 Novel l Host Configuration NetW are V ersion 3.x RPR INTER Set up These ste ps are for Nov ell environm ents with Netware 3.x (or earlier) file serv ers. To configu re a new RPRINTER on a NetWare 3.x n etwork: 1. Log in to t he LineJet P rint Server c ommand shell , npsh, as roo t.
NetWar e Version 4.x PSERVE R S e tup 189 14. Select “ Printer Conf iguration” from the next menu to display a list of configur ed printers . 15. Select an item from the list ( e.g., either an exis ting printer name or a “Not Installe d” one) to dis play the print er configurat ion window.
190 Chapter 10 Novel l Host Configuration 5. Press INS ERT to add a que ue. 6. Type in a new queue name and press ENTER. 7. Press ESCAPE. 8. Select “Pr i nt Servers.” 9. Press INS ERT to add the new pr int server. 10. Type the na me of the LineJ et Print Ser ver.
NetWare V ersion 4.x RPRINTER Setup 191 To commun icate with the unit using npsh.exe : a. From a DOS p rompt on a Nov ell workstat ion, begin an npsh session with the un it. npsh unitname Starts a Telnet-like s ession with th e named prin t server with gue st access only.
192 Chapter 10 Novel l Host Configuration c. create a pr inter object to us e with the print serv er object you ch ose or created , and attach i t to the chosen qu eue; Exampl e: NDS queue name: Financ e NDS prin t server name: Fin_Q NDS prin ter name: Fin_Prt_ 1 NDS prin ter name: Accoun ting_Prt_1 3.
NetWare 3.x - No PSERVE R Connection 193 Novell T roubl eshooting T ip s This sec tion provides informati on on possi ble solutio ns to some s tandard configur ation erro rs. If you requ ire technic al support, pl ease have as much of the f ollowin g inform ation availab le wh en you call : 1.
194 Chapter 10 Novel l Troubleshooting Tips NetW ar e 4.x - No PSERVER Connecti on • Has the Li neJet Print S erver been po wer cycled once the PCONSO LE steps we re comple ted? This will make the pr int server b oot up and r ealize which prin t queue and file server it needs to serv ice.
195 11 Novell Configuration For 10/100Base-T Interfaces Overview This chapter provides addi tional informati on for Novell env ironments u sing the 10/100 Base-T interfa ce, incl uding: 1.
196 Chapter 1 1 Novel l LineJet Print Server Configuration (10/100Base -T) Novell LineJet Print Server Configuration (10/100Base -T) There are no man datory Novel l settings neede d before the print s erver can be detected o n the network .
Preferred File Server (NDS & Bindery) 197 Preferred Fi le Se rver ( ND S & B indery) In a binde ry setup, the pr eferred file server speci fies the fil e server that the print s erver object was created on. In an NDS setup, i t specifies a file server that the pr int server object resides on.
198 Chapter 1 1 Novel l LineJet Print Server Configuration (10/100Base -T) 3. At the prompt, enter : store pserver no vell fse rver add fserv ername wher e fser vername is the name o f the Novel l file server y ou want to a dd as a preferr ed file server.
Setting Password Security (NDS & Bindery) 199 Setting Password Secur ity (NDS & Bindery) In additi on to the gener al security me asures, a No vell setup provides fur ther password s ecurity.
200 Chapter 1 1 Novel l LineJet Print Server Configuration (10/100Base -T) 3. Look unde r the “Nove ll” section and add the new password to the “Pserver Password” field. 4. Click o n the SUBMIT bu tton when done a nd physicall y re-power the printer to make the new s ettings tak e effect.
Changing The Pr int Server Name (NDS & Binder y) 201 4. Change the “Service In terval” to the des ired number (in seconds). 5. Re-power the LineJet Pr int Server by turning the p r inter off and o n to make the ch ange s take ef fect . Net ware 3.
202 Chapter 1 1 Novel l LineJet Print Server Configuration (10/100Base -T) HTML Method 1. Load a Web bro wser on a network station tha t can communic ate with the print s erver over TCP/I P. 2. Direct you r Web browser to URL: http:// LineJetIPaddress /adminConf.
Changing The Print Server Mode (NDS & Bindery) 203 2. Direct you r Web browser t o URL: http:// LineJetIPaddress /networkConf.html (e.g., http://192.75.11.9/networkConf.html ) 3. Look un der the “Novell” sec tion and go to the “F rame Type” field to se lect the appro priate frame t ype.
204 Chapter 1 1 Novel l LineJet Print Server Configuration (10/100Base -T) 2. Direct you r Web browser to URL: http:// LineJetIPaddress /networkConf.html (e.g., http://192.75.11.9/networkConf.html ) 3. Look unde r the “Nove ll” section and go to the “Se rvice Type” field to sele ct the approp r iate mo de.
Setting The Print Serve r Prefer re d NDS Tree (N DS) 205 3. Look under the “Novell ” secti on and enter the new contex t in the “NDS Context” fie ld. 4. Click o n the SUBMIT bu tton when done a nd physicall y re-power the printer to make the new s ettings tak e effect.
206 Chapter 1 1 Novel l LineJet Print Server Configuration (10/100Base -T) Manual (T elnet) Method 1. Telnet to th e print serve r. This will bring u p a login sc reen: telne t ipad dress 2. You shou ld now se e a prompt di splayed tha t has the Line Jet Print Server’ s IP address fol lowed by a c olon then root .
NDS PSER VER Setup (Netware 4.x) 207 Novell Host Configuration (10/100Base-T) This section c overs PSERVE R and RPRINTER/NPR INTER setups on th e LineJet Print Server.
208 Chapter 1 1 Novel l Host Configuration (10/100Base- T ) 10. Type in th e name for the printer in the “Printer name” field. In NDS, a printer obje ct can only be attached t o one print ser ver object at a given tim e, as Novell is usi ng the printer obj ect to represent a phy sical printer.
Bindery PSERVER Setup (Netware 3.x and 4 .x) 209 of the pri nt server’s E thernet addres s found on the bottom of th e device (e.g., M_091C1A ). 20. Select t he “Define ad ditional pr operties” and c lick on the “C reate” button. 21. Click o n “Assignments ” in the dia logue that pops u p, and then on th e “Add.
210 Chapter 1 1 Novel l Host Configuration (10/100Base- T ) RPRINTER/NPRINTER Setup (Ne tware 3.x an d 4.x) This pro cedure associa tes an existi ng PSERVER with a remote Lin eJet Print Server a cting as a RPRINTER/NP RINTER in a NetW are 3.x or Netwa r e 4.
RPRINTER/NPRINTE R Setup (Netware 3.x and 4.x) 211 5. Click o n “Enabled” a nd enter the name used with the PSERVER.NLM star ted in step 1 in to the “Prin t Server Name” field.
212 Chapter 1 1 Troubleshooting (10/ 100Base-T) 5. Physic ally re-pow er the printer to make the new s ettings tak e effect. Wait two m inutes and th en check your P SERVER to s ee if the appropr iate printer is being s erviced. Th e printer sho uld displa y a message such as “Waiting f or job.
PSERVE R Se tup 213 • When setti ng the LineJet Print Server up as a PSERVER, di d you specify a destinati on on the LineJet Pri nt Server (e.g., d1prn ) for the printer name, and did y ou remember .
214 Chapter 1 1 Troubleshooting (10/ 100Base-T) there is a valid “Des tination =” line, then do uble check th at there is an entry fo r this number under the “ENP INFO ” section . • Try a debug nest logs telnet c ommand (or fi nd the “Genera l Message s” section o n the Novell HTML s tatus page).
RPRINTER/NPR INTER Setup 215 • Is there an entry when a list rprinter telnet c ommand is d one on the LineJet Print Server ( not found on th e Novell HTML status page)? W hen the LineJ et Print Serv er is config ured as an RPRIN TER, this com mand should p roduce the a ppropriate ent ry.
216 Chapter 1 1 Troubleshooting (10/ 100Base-T) Printing Rela ted The job goes to the queue but no thing print s If nothing is printin g, make sure you have a conne ction to the L ineJet Print Server fi rst. See the P SERVER or R PRINTER secti ons above if yo u are having con nection-rela ted problems.
Printing Related 217 • Did you turn off banner pages an d form feeds if this is already taken care of within a n applicati on or on the Lin eJet Print Ser ver? Doublin g up of these ty pes of print feat ures is easy to do sinc e these options are provid ed both on the LineJet Print S erver (in a model) an d within the print comm and.
218 Chapter 1 1 Troubleshooting (10/ 100Base-T).
219 12 Commands Command Sh ell Overview The LineJ et Print Server comes with an i n-depth comman d shell whic h allows you to manipulate o bjects l ike destin ations, I/O ports, and model s. Addition ally, it prov ides you wi th monitori ng and troubles hooting capa bilities.
220 Chapter 12 Complete C ommand List Comman d Prefixes Typing in the first po r tion of a command wil l produce an error messa ge showing t he correct s yntax. For exampl e, typing in store tcpip will produce a list of all c ommands tha t start with this prefix.
Store Commands 221 store pserver tc psocket TCPpor tnumber dest des tination store pserver tc psocket 5000 dest d 1prn Assign a p re-defined TCPpo rtnumber to a particu lar des tination on the LineJ et Print Serv er.
222 Chapter 12 Complete C ommand List store tcpip ifnu m addr IPad dress store tcpip 1 ad dr 192.7 5.11.9 Store the IP address fo r the LineJ et Print Server . store tcpip ifnu m mask netm ask store tcpip 1 ma sk 255.2 55.255.0 Store the subnet mask for the LineJ et Print Serv er.
Set Commands 223 not buf fer any data when there is a b locked situa tion with the pri nter. Normally it i s best to have both keepa live and disb ufmgmt enabled. store tcpip tcp access [ root] add|d el IPaddr ess store tcpip tcp access a dd 192.75.1 1.
224 Chapter 12 Complete C ommand List set d est dest ination ser vice [[-]so cket][[-] lpd] [[-]l psched] [[- ]rprinte r] [[-]pser ver] [[-] netbios] [[-]f tpd] set d est d1prn s ervice - netbios Set the desti nation to han dle only ce rtain print s ervices.
Set Commands 225 set l ogpath logp ath port TCPpo rtnumber | emai l|syslog set l ogpath l3 p ort 2000 Determin e where the lo g information sho uld be se nt for a print job o r attached p rinter. The choices are: TCPportnumber TCP port n umber ranging from 1024 to 6 5000.
226 Chapter 12 Complete C ommand List set m odel mode l traile r traile rstring set m odel m7 tra iler $FF Set a tra iler string to be sent to the pr inter at the en d of any pri nt jobs passing thr ough this mode l . tra ilerstring can co nsist of up to nine elements .
Set Commands 227 set s nmp To add a us er named snmp with root privil eges, pl e as e f oll ow the s tep s below: 1. Login to th e LineJet P rint Server as a root user. 2. Add a us er named snmp . set u ser add snm p 3. Set the us er type to root . set u ser type sn mp root 4.
228 Chapter 12 Complete C ommand List set s ysinfo logi nfo [-]s ys | [-]tcp | [-]ipx | [-]spx set s ysinfo logi nfo -sys ipx Set the LineJet Prin t Server debu gging inf ormation typ e. Usually this informa tion incl udes unexpe cted errors or exception s from the pr int server d ivided into these group s: sys General s ystem messag es.
Set Commands 229 set s ysinfo modu le [[-]n ovell] [[-] netbios] set s ysinfo modu le -nove ll Enable a nd disable cer tain network p rotocol stacks within the Li neJet Print S erver. Somet imes it he lps to disabl e any protoc ols you are not using on your network .
230 Chapter 12 Complete C ommand List Defined v ariables a re reference d in string s by placing an $ b efore the variab le name (e.g., set model m1 trailer $FF ). set v ar from def ault Set all v ariable setting s back to fa ctory defaults. set v ar from sto red Set all c urrent va riable set tings to the v alues stored in flash mem ory.
Debug Commands 231 list snm p List Tra p Table contai ning SNMP Ma nagers. list sys info List the current LineJ et Print Ser ver system info rmation (e.g., c ontact name a nd protocol st acks enabl ed). list tcp ip List all current TCP/IP network settings (e.
232 Chapter 12 Complete C ommand List debug nest logs View mis cellaneous Novell lo g messages . debug nest odi Determin e what frame type is bonded to which board nu mber under Novell. debug nest pserv er View the N ovell PSE RVER log mes sages including queues attac hed to.
Miscellaneous C ommands 233 cance l jobI D cance l d1prn-10 Remove a job from an I/ O port queue . Use lpstat to find a particular job ID firs t. start fox|tts|lo opb prn start fox prn Begin a d ebugging tes t on one of the I /O ports on the LineJet P rint Server.
234 Chapter 12 Complete C ommand List telne t host IPaddress [ escap echaracter ] telne t 192.75.11 .35 Start a Te lnet session with another TCP/IP ho st specified by hostI Paddress on the Lin eJet Print Ser ver network. If escap echaracter is used, it resets t he key sequenc e used to exit t he Telnet sess ion.
235 13 Extra Featur es LineJet Print Server Security There are TCP access l ists available to restrict host connecti ons with the device. Users And Passwords By defau lt, the LineJet P rint Server s upports two logi cal user types: root Access t o everything w ithin the print server includ ing all configur able settin gs.
236 Chapter 13 LineJe t Print Server Se curity W eb Browser 1. Using a W eb browser, direct the browser to URL http:// LineJetIPaddress /adminConf.html (e.g., http://192.75.11.9/adminConf.html ) 2. At the “A dministratio n Configuration” HTML form tha t displays, s croll down to the “Passwor ds” section.
TCP Access Lists 237 TCP Acces s List s Within TCP/IP environ ments, the LineJet Prin t Server c an restrict h ost access to destin ations/queue s and remote co mmand (i.e., rsh , rcmd , remsh and telnet ) exec utio n services . This is do ne using a n acc es s list simi lar i n function to the Unix .
238 Chapter 13 Printer Monitoring And Logging Printer Monitoring And Logging One of the key aspe cts of mai ntaining a computing e nvironment i s monitoring printer s tatus and log ging this in formation to us eful places. The LineJet Print Server a llows this throug h its built- in HTML forms, com mand set, and logpa ths.
Printer Logging Through Logpaths 239 Printer Logging Through Log p aths Destinati ons are l ogical qu eues with as sociated m odels and l ogpaths. Mode ls allow ex tra processing needed with th e print jobs. L ogpaths are us ed if logging is desired fo r each job.
240 Chapter 13 LineJe t Print Server Nami ng Schemes W eb Browser 1. Using a W eb browser, direct the browser to URL http:// LineJetIPaddress /destConf.html (e.g., http://192.75.11.9/destConf.html ) 2. At the “P rint Path Confi guration” HTM L form that dis plays, selec t a destinati on link (e.
241 14 Interfaces Overview The printe r interface i s the point wher e the data line fr om the host c omputer plugs into the pr inter. The interfac e processes all c ommunications signa ls and data to and from the hos t computer. It consists of a pr inted circu it board assembl y (PCBA) and a connec tor for the data cable from the host comp uter.
242 Chapter 14 Centronic s Parallel Interface Centronics Parallel Interface The Centron ics interfac e enables the pr inter to oper ate with contr ollers designed for buffered Ce ntronics printe rs. The lengt h of the data ca ble from the host c omputer to the pr inter must no t exceed 15 f eet (5 meters) .
Centronics Parallel Interface Configuration 243 Data Strobe . Carries a low true, 100 ns min. puls e from the ho st that clocks data into t he printer. Paper Instruction (PI) . C arries a VFU cont rol signal fr om the host with t he same tim ing as the data lines.
244 Chapter 14 Bi-T ronics Parallel Inter face Bi-T ronics Parallel Interface Bi-Tro nics is a par allel interf ace with bi directional c apabilitie s. Features inc lud e t he follow ing: • Timing of t he signals has been reduced, thereby sp eeding dat a transmi ssion.
The Negotiation Phase 245 The Ne gotiation Phase The negotiati on phase determin es which operatin g mode will be used. At thi s time, the h ost and the pr inter will s ense what devices are attache d, the support ed signals av ailable, and whi ch mode to us e.
246 Chapter 14 Bi-T ronics Parallel Inter face Note The length of the data cable from the host compute r to the printer s hould not exc eed 10 meters ( 32 feet).
Signals 247 24 Signal Ground (Data 5) 25 Signal Ground (Data 6) 26 Signal Ground (Data 7) 27 Signal Ground (Data 8) 28 Signal Ground (PE rror , Sele ct, nAck) 29 Signal Ground (Busy , nFa ult) 30 Sign.
248 Chapter 14 RS-2 32 And RS-422 Se rial Interfaces RS-232 And RS-422 Seria l Interfaces The RS-2 32 and RS-422 serial inte rfaces enabl e the print er to operate with bit serial devices t hat are comp atible with an RS-232 con troller. The in put serial data trans fer rate (in bau d) is sele ctable from th e printer opera tor panel.
RS-232 And RS- 422 Serial I n terface Signals 249 RS-232 And RS-42 2 Serial Interface Signals The RS-23 2/RS-422 con nector mounted on the printer is a 25-pin DB -25S type. The m ating connec tor is a DB-25P . RS-232 and R S-422 compati ble serial interface signals are d efined as fol lows: RS-232 Transmitted Data (TD) .
250 Chapter 14 RS-2 32 And RS-422 Se rial Interfaces RS-232 And RS-42 2 Serial Interface Error Handling Parity E rror Handlin g . Parity error checking is a configurati on option selecte d from the ope rator panel. With odd or even parit y checking s elected, a char acter with a pa rity error is replaced w ith a questio n mark (?) cha racter.
251 15 Routine Service And Diagnostics Routine Service Period ic cleanin g ensures efficient ope ration and c lear print qu ality, an d it is the only maintenance your prin ter requires . If the print er is located in a dust y area or is used for heav y duty printi ng, clean it more often.
252 Chapter 15 Routine Serv ice 3. Unlatch b oth ribbon spoo ls and carefu lly lift the m off the hubs. Raise the ribbon o ut of the ribbon path. 4. Using a s oft-bristled , non-metallic brush (such a s a toothbrush ), brush paper du st and ribbon l int off the tra ctors, shuttle c over assembl y, base cast ing, and rib bon guides.
Interior Cleaning 253 Figure 18. Cleaning th e Print Mechanism (Cabinet M odels) Ribbon S pool Base Casting Pla ten (hid den) Splined Shaft Paper Support Tract or Forms Thicknes s Lever Hammer Bank Co.
254 Chapter 15 Routine Serv ice Figure 19. Cleaning the Print Mechanism (Pedestal Models) phpcl en August 15 2000 Ribbo n Spool Lockin g Latch Ribbon Hub Forms Thicknes s Lever Ribb on Guide (2) Ribb .
Printer Self-Tests 255 Diagnosing Problems This secti on is designed to help you r ecover from an y problems whi ch may arise w ith normal pri nter operatio n. Printe r Self-T est s The printer sel f-tests are used to check th e print quality and operation of yo ur printer.
256 Chapter 15 Diagnosi n g Problems 8. Cycle t hrough the c hoices. X = Full Width or 80 columns . 9. The width yo u have chos en will be used for th e printer test. 10. 11 . 12. 13. 14. S tarts t he test. 15. S tops the test. 16. Locks t he ENTER ke y .
Printing A Hex Dump 257 Printing A Hex Dump Figure 20. Hex Dump Sample A hex c ode printout (o r hex dump) i s a translation o f all host in terface data to its hex adecimal or s ymbolic e quivalent. A hex dump li sts all AS CII characte r data rec eived from the host computer with their corre sponding two-di git hexadec imal codes.
258 Chapter 15 Diagnosi n g Problems T able 20. Printing a H ex Dump Step Key Result Notes 1. Ma ke sure the prin ter i s on. Ra ise the pri nter cover . 2. The prin ter must be o f flin e for testing. 3. Allows yo u to make configuration changes . 4.
Fault Messages 259 Fault Mes sages If a fault c ondition oc curs in the pri nter, the sta tus indicator on the control panel flas hes on and off, and the mess age display indic ates the specifi c fault.
260 Chapter 15 Diagnosi n g Problems T able 21. LCD Messa ge T roubleshooting T able Displayed Mess age Explanation Action Required 8.5V PWR F A IL* Internal p ower failure. Con tact your Hewlett- Packard Customer Service Engi neer . 1 15V PWR F AI L* Control ler voltage failure .
Fault Messages 261 ER ROR: DC PROGRAM NOT V ALID Print er cannot find t he data contro ller program o r the valid ation checksum i s corrupt. Downlo ad the progr am aga in. If the mes sage occurs again, call your Hewlett-Pa ckard Customer Service Engi neer .
262 Chapter 15 Diagnosi n g Problems ERROR: WR ITING TO FLA SH Hardware o r software f ault in flash memory . Downlo ad the program again. If the mes sage occurs again, call your Hewlett-Pa ckard Customer Service Engi neer . 1 ER ROR: WRONG CHECKSUM Th e printer received th e complete prog ram but the c hec ksum did not match.
Fault Messages 263 HMR BANK F AN FL T Sensors cannot detect c urrent in fan circ uit. Power o f f p rinter and remo ve paper path. Chec k that fan cable i s connected. Ch eck for obstruc tion of vents and fa n airway ; remove any obstruc tions. Check for items beneath th e printer bloc king cabinet vents.
264 Chapter 15 Diagnosi n g Problems P AP I LLGL ST* Fatal firmware err or on control ler board. Con t act your He wlett-Packard Customer Service Engi neer . 1 P AP I NCMPL ENER* Fatal firmwa re error on co ntroller board. Con t act your He wlett-Packard Customer Service Engi neer .
Fault Messages 265 RESETTING . . . PLEASE W AIT Th e printer fini shed loadin g the program into flash me mory and is autom atically r esettin g itself. None RESTORING BOOT CODE Normal dow nload ini tializatio n messag e. None RIB INVLD CMD* Fa t al firmwa r e error on control ler board.
266 Chapter 15 Diagnosi n g Problems ST ACK UNDERFLOW* Fata l firmware error o n controller board. Con t act your He wlett-Packard Customer Service Engi neer . 1 ST AC KER F AUL T Fa iled motor circuit. Contact your Hewlett-Packard Customer Service Engi neer .
267 A Printer Specifications And Regulatory Information Ribbon Specifications Use only the se Hewlett-Packa rd ribbons in LP S eries and LineJ et printers: For more infor mation pleas e contact any of our worl dwide sales off ices of HP Channel Partn ers, or check out http://www.
268 Appendix A Ribbon Spe cifications Ribbon Life Product Number Description Use On Product Lifetime C3207A B ox of six 60 yard black tex t ribbons Any LineJet Prin ter Any HP LP Series Pr inter 30 Mi.
269 Printer Dimen sions Envi ronment al Ch aracter istics T emperature Operating : 41 ° to 1 04 ° F (5 ° to 4 0 ° C) up to 5000 feet (1 524 meters) 41 ° to 9 0 ° F (5 ° to 32 ° C) up to 8000 f.
270 Appendix A Electr ical Ch ar acteri stics E NERGY S TAR® LineJet p rinters comply with the requirem ents of the E NERGY S TAR® Off ice Equipmen t Program of th e U.S. Environ mental Prot ection Agenc y. When in the reduc ed power st ate, the print er display s “Power Sa ver Mode,” and is activat ed at the contr ol panel.
271 Material Safety Dat a Sheet s If the c ustomer site needs a Material Safety Data Sheet, provi de the foll owing informa tion: • HP part o r product numb er • Chemical substance des cription .
272 Appendix A Communication Notic es Communication Notices Federal Communications Commission (FCC) Statem ent : This equ ipment has been tested and fou nd to comply with the limits for a Class A digital device, pur suant to Part 15 of the FCC Rules.
273 EN 550 22 Klasse A Ger äte bedürfen fol gender Hinweise: Nach dem EMVG: “Geräte dürfen an O r ten, für die s ie nicht asreic hend entst ör t sind, nur m it besonderer G enehmigung d es Bundesmine sters für Post und Telekommu nikation od er des Bund esamtes für Po st und Telekomm unikation be trieben wer den.
274 Appendix A Communication Notic es.
275 B Paper Specifications And Forms Design Introduction LP Series and LineJet printers us e dot matrix li ne printing tec hnology, whi ch permits a high degree of printing flexibility. Do t matrix techn ology enabl es the user to print graphic images, line drawn charact ers, special characters, an d multiple alphabets.
276 Appendix B Gener al Paper Specifications General Paper Specifications This secti on describes the minimum paper specifi cations that mu st be met t o ensure the best printer p erformance. Always tes t paper and f orms before bu ying large qu antities.
Terms And Definitions 277 Test the pa per first if you plan to use i t in envi ronments with humi dity of less than 20% or greater th an 80%. Also tes t paper that you plan to use a t high humidity to.
278 Appendix B Pa per Guidelines The figure s below illus trate the terms used in this a ppendix. Figure 21. Basic Forms Terminology Figure 22. Inward and Out ward Perforations Figure 23.
Environmental Considerations 279 Environment al Considerations Before t hey are used, fo rms should b e stored for at least 24 hour s— preferably 48 hours— in the environ ment in whic h they will be us ed. This stabili zes the moi sture content o f the paper, res ulting in be tter feeding and stacki ng.
280 Appendix B Pa per Guidelines Metho ds Of Forms At t achme nt Any meth od of attachme nt (staples, c rimps, gluin g, etc.) must be designed in a way that does not permit air to be trapped between cop ies of a form. Hard or wire brads and staples must not be used.
Chaff Content 281 Cut-T o-Tie R atio A commo n cut-to-tie ratio for bon d forms is 4:1 (t hat is, 80% cut to 20% ties). This value i s dictated chie fly by the app lication program under which the form runs. Lo wer cut-to-tie rati os will yiel d better form ha ndling, but s tacking may suffer d ue to increa sed stif fness of the p erforations.
282 Appendix B Form De sign Checklist Form Design Checklist Use this checklist to help you reme mber key a reas of consider ation when designi ng and orderin g forms and paper stoc ks. Environm ent ________ Befor e they are use d, forms are g iven at least 24 hours of condens ing time in t he environment in which the y will be used.
Chaff Content 283 T ractor Pin H o les The holes which engage the tractor pins must conform t o the followin g specifi cations: Methods Of For ms Att ach ment ________ Must n ot allow air en trapment .
284 Appendix B Form De sign Checklist Perforation Intersection s ________ Horizon tal-vertica l perforation s are tie point s. Cut points at such interse ctions ar e unacceptab le. Chaff Content ________ Tract or holes are cl ear of chaff. ______ __ There is no loose ch aff in the box the paper is packed in .
Storage And Handling 285 Summ ary Beca use it is impo ssible to te st all po ssible forms availabl e for use in the printer, He wlett-Pack ard recommends that paper confo rm to the specifi cations outli ned in this a ppendix for the best printer performance.
286 Appendix B Summary.
287 C Standar d ASCII Character Set KEY ASCII CHARACTER ESC 33 27 1B OCTAL DECIMAL HEX B 7 0 0 00 11 1 1 B6 0 B5 0 0 1 1 0 1 1 0 0 0 1 1 0 1 1 COLUMN 0 1 2 3 45 67 BITS ROW B4 B2 B3 B1 0 1 2 3 4 5 6 7.
288 Appendix C.
289 D Monitoring Printers Implementing Printer M a nagement Printer m anagement inc ludes the fo llowing tasks : • Monitor ing the status of network pr inters • Respondi ng to alarms • Gatheri n.
290 Appendix D Impleme nti ng Pr inter Management Compon ent s of the Printer MIB The printe r MIB gives the network manager ac cess to mos t of the informatio n that is no rmally acc essible through the NIC command set for config uring the server wi th SNMP.
Monitoring With AIX NetView/6000 291 Monitoring T ools Many tool s can be us ed to monitor pr inters with SN MP agents. One of these tools is NetVi ew. There are also othe r MIB browsers , which are not desc ribed here. Monitoring W ith AIX Net V iew/6000 The AIX NetView/60 00 program can manage any IP-address able devi ce with an SNMP a gent.
292 Appendix D Monitoring Tools Reference For further informat ion on SNMP a nd MIB, refer to the following: • RFC 1155 — S tructure an d Identification of Managem ent Information for TCP/IP-based.
293 Index Symbols ? Command, 219 Num erics 15V PWR F AIL * m essage, 260 20 CPI Cond ensed, 88, 91 23.5V PW R FAIL * mess age, 260 48V PWR F AIL * m essage, 260 8.
294 Latch Data On, 113 Prime Sig nal, 113 Response Polarity , 113 Centroni cs para llel int erface configur ation menu, 1 12 configur ing, 112 Changing LineJet P rint Server n ame, 185 paramete rs, 48.
295 Data Bits parameter, 115 Data carrier detect (DCD) signal RS-232 s erial interfac e, 249 Data lines 1 through 8 signal, 242 Data Pola rity paramete r Centroni cs, 113 Data proto col, 114, 115 Data.
296 F Factory default paramete rs, 44 Fault Action , 127 Fault mess ages, 259 15V PWR F AIL *, 2 60 23.5V PW R FAIL *, 260 48V PWR F AIL *, 2 60 8.5V PWR FAIL *, 260 A TO D OVERUN * , 260 ACCESS N ULL.
297 ERRO R PROGRAM N OT COMP ATIBLE, 261 ERRO R PROGR AM NOT VALI D, 26 1 ERROR SE CURITY PAL NOT DETECTED, 261 ERROR SHORT A T ADDRESS XX XX, 261 ERROR WRI TING TO FL ASH, 261, 262 ERROR WRO NG CHECKSUM, 2 62 LOADING PROGRAM FRO M PORT XX %, 263 RESETTING .
298 LineJet P rint Server Na ming Scheme, 2 40 LineJet P rint Server S ecurity, 235 LinePrinte r Pl us menu, 80 Lines P er Minute (lpm) , 27 List Command s, 230 LO DRV.
299 PAP FIFO U NDRFL * message, 26 3 PAP ILLG L ST * message , 264 PAP INCMP L ENER * mes sage, 264 PAP INVL D CMD * messa ge, 264 PAP INVL D PARM * mes sage, 264 PAP NOT SCHE D * message, 264 PAP NT .
300 Printing s peed, 27 Printou t, generating hex dump, 109 Printou ts configur ation, 52 hex code , 257 Printronix Printing System PPS, 160 Proprinte r XL Emulatio n, 87 Protect Configs.
301 pin assign ments, 248 pro toc ol, 249 X-ON/X-OFF s ignal, 249 RS-422 s erial interfac e signals, 249 receiv ed data (RD), 24 9 transmitted data (TD), 249 Run Mode, 2 9 Running s elf-tests, 255 S S.
302 Timeout, 11 9 TOF action at prime s ignal parameter , 111, 113 Transmitted data (TD) si gnal RS-232 s erial interfac e, 249 RS-422 s erial interfac e, 249 Trickle Time, 119 Troubleshoo ting diagnost ic tools, 24 Novell 4 .
.
Copyright © 20 00 Hewlett-Pac kard Company 172720-001 A.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) LQH-HW 3ULQWHUV (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) LQH-HW 3ULQWHUV noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) LQH-HW 3ULQWHUV - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) LQH-HW 3ULQWHUV reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) LQH-HW 3ULQWHUV erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) LQH-HW 3ULQWHUV besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) LQH-HW 3ULQWHUV verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) LQH-HW 3ULQWHUV. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) LQH-HW 3ULQWHUV gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
