Benutzeranleitung / Produktwartung F100 des Produzenten HP (Hewlett-Packard)
Zur Seite of 46
HP Pr oL iant C lus ter F100 Inst allati on Gui de May 2004 (First Edition) Part Number 364768-001.
© Copyright 20 04 Hewlett-Packard Development Company, L.P. Confidential computer softwa re. Valid license from HP required for posse ssion, use or cop ying. Consistent with FAR 1 2.211 and 12.21 2, Commercial Com puter Software, C omputer Software Documentation , and Technical Data for Commercial Items a re licensed to the U.
3 Contents Overview of the HP ProLiant Cluster F100 5 F100 Cluster Components........................................................................................................ ............ 5 Guidelines for Mu ltiple Cl usters ...................
4 HP ProLiant Cluster F100 Installation Guide Cluster-Specific SmartS tart Insta llation ................................................................................. 26 SmartStart Inst allation Steps...............................................
5 Overview of the HP ProLiant Cluster F100 In This Section F100 Cluster Components .............................................................................................................. 5 Guidelines for Multiple Clusters ......................
6 HP ProLiant Cluster F100 Installation Guide • One supported HBA ("Host Bus Adapters" on page 8 , "host bus adapter" on page 40 ) per server • • NICs Optical transceivers (o.
Overview of the HP ProLiant Clu ster F100 7 • • • • • • • • Up to five two-node clusters sharing a single MSA1000 A maximum of 20 total nodes in unique clusters, not to exceed five uni.
8 HP ProLiant Cluster F100 Installation Guide • • • • MSA1000 RA4100 For more information on the shared storag e system, refer to the shared storage documentation. HP StorageWorks Controllers Each storage system is shipped with one HP StorageWorks Controller installed.
Overview of the HP ProLiant Clu ster F100 9 For more information, refe r to the HBA documentation. Optical Transceivers The F100 cluster uses optical transceivers , which convert data that is transmitted and received over a fibre-optic cable. The F100 cluster uses either SFP for the MSA1000 or GBIC-SW for the RA4100.
10 HP ProLiant Cluster F100 Installation Guide Because clients desiring the full advantage of the cluster will now connect to the cluster rather than to a specific server, configuring client connections will differ from those for a stand-alone server.
Overview of the HP ProLiant Clu ster F100 11 HP recommends configuring the client LAN as a backup path for intracluster communication. This provides a secondary path for the cluster heartbeat in case the dedicated primary path for intracl uster communications fails.
12 HP ProLiant Cluster F100 Installation Guide • • • • • • • • • Dedicated interconnect using an Ethe rnet crossover cable—An Ethernet crossover cable (supplied in the HP ProLiant Cluster Starter kit) can be used to connect the NICs directly to create a dedicated interconnect.
Overview of the HP ProLiant Clu ster F100 13 HP SmartStart CD SmartStart is a software package that provides a streamlined process for the installation of operating systems, and pr ovides key system software, such as drivers, utilities, diagnostic tools, and ROM updates.
14 HP ProLiant Cluster F100 Installation Guide HP Modular Smart Array 1000 Support Software CD The HP Modular Smart Array 1000 Suppor t Software CD contains drivers and utilities required for the MSA1000 storage system.
Overview of the HP ProLiant Clu ster F100 15 IMPORTANT: The software applications might need to be upd ated to take full advantage of clusterin g. Contact the software vendors to verify whether their software supports MSCS and to ask whether any patch es or updates are available for MSCS oper ation.
.
17 Setting Up the HP ProLiant Cluster F100 In This Section Preinstallatio n Overview ....................................................................................................... ....... 17 Preinstallation Guidelines ........................
18 HP ProLiant Cluster F100 Installation Guide For more information, refer to the HP Zoning User's Guide Version 3.0 at the HP High Availability website ( http://www.
Setting Up the HP ProLiant Cluster F100 19 • • • • • • • • • • • • • What is the username, password, a nd domain for the domain account under which MSCS will run? What disks .
20 HP ProLiant Cluster F100 Installation Guide • • • • • Only NTFS and basic disks are supported on shared drives. MSCS software requires drive letters to remain constant throughout the life of the cluster. Therefore, you must assign permanent drive letters to the shared drives.
Setting Up the HP ProLiant Cluster F100 21 Follow the installation instructions in the ProLiant server documentation to set up the hardware. To install the HBAs and any NICs, follow the instructions in the next section.
22 HP ProLiant Cluster F100 Installation Guide Setting Up the Storage System Follow the instructions in the shared ex ternal storage documentation to set up the storage system, the supported StorageWorks switches or hubs, the controller, an d the Fibre Channel cables.
Setting Up the HP ProLiant Cluster F100 23 • • Ethernet direct connect using a crossover cable Ethernet direct connect using a switch or hub Ethernet Direct Connect Using a Crossover Cable An Ethernet crossover cable is included with the HP ProLiant Cluster Starter kit.
24 HP ProLiant Cluster F100 Installation Guide IMPORTANT: Using a public network as the dedicated int erconnect path is not recommended because it r epr esents a potential single poi nt of failure for cluster communication.
Setting Up the HP ProLiant Cluster F100 25 IMPORTANT: Refer to the MSCS support matrix for the supported hardware, software, cluster-suppor ted servers, and firmwar e version levels the cluster requires. To obtain the matrix, access the High Availability website ( http://www.
26 HP ProLiant Cluster F100 Installation Guide CAUTION: Installation using SmartStart assumes that SmartStart is being installed on new servers. Any existing data on the boot drive of the server will be erased.
Setting Up the HP ProLiant Cluster F100 27 b. Power on the shared storage. It might take up to two minutes for the storage system to completely power up. c. Power on and boot node 1 with the SmartStart CD in the CD-ROM drive. The CD will automatically run.
28 HP ProLiant Cluster F100 Installation Guide a. From the desktop of node 1, run the HP Array Configuration Utility. b. Configure the shared storage drives.
Setting Up the HP ProLiant Cluster F100 29 13. Create the cluster on node 1 for Microsoft® Windows® 2000 Advanced Server. a. Install the Cluster Service (MSCS) component in Add/Remove Programs. For more information on installing and configuring MS CS, refer to the Microsoft® Windows® 2000 Advanced Server documentation.
30 HP ProLiant Cluster F100 Installation Guide For the F100 for MSA1000 with Microsoft® Windows® Server 2003, y ou can cluster additional nodes using the previous steps. 5. Create the cluster on node 2 for Microsoft® Windows® 2000 Advanced Server.
31 Technical Support In This Section Before You Contact HP .......................................................................................................... ...... 31 HP Contact Information.....................................................
32 HP ProLiant Cluster F100 Installation Guide • Outside North America, call the neares t HP Technical Support Phone Center. For telephone numbers for worldwide Tec hnical Support Centers, refer to the HP website ( http://www.
33 Acronyms and Abbreviations ACU Array Configuration Utility ASR Automatic Server Recovery CPU central processing unit DHCP Dynamic Host Configuration Protocol DNS Domain Name System FQDN Fully Quali.
34 HP ProLiant Cluster F100 Installation Guide I/O input/output LAN local-area network MSA1000 HP StorageWorks Modular Smart Array 1000 (on page 40 ) MSA1000 Controller HP StorageWorks Modular Smart A.
Acronyms and Abbreviations 35 PSP ProLiant Support Pack RA4000 Controller HP StorageWorks RAID Array 4000 Controller (on page 40 ) RA4100 HP StorageWorks RAID Array 4100 (on page 40 ) RAID redundant a.
.
37 Glossary adapter A device that converts the protocol and ha rdware interface of one bus type into another without changing the function of the bus. array All the physical disk drives in a storag e system that are known to and under the control of a controller pair.
38 HP ProLiant Cluster F100 Installation Guide dedicated interconnect A type of interconnect that is used solely for intracluster (node-to-node) communication. Communication to and from network clients does not occur over this type of interconnect. Also called private interconnect.
Glossary 39 failover (cluster) 1. The process that takes place when one controller in a dual-redundant configuration assumes the workload of a failed companion controller.
40 HP ProLiant Cluster F100 Installation Guide host bus adapter A card used to connect a peripheral device to a host server. HP StorageWorks Modular Smart Array 1000 A storage device including disk drives and one or more resident array controllers.
Glossary 41 IP address Internet Protocol address. An address assigned to a network interface card, which computer entities use to locate and communicate with each other. IP addresses can be statically or dynamically assigned. logical unit Commonly called a LUN (which is the acronym for logical unit number).
42 HP ProLiant Cluster F100 Installation Guide NT File System A file organization system by which data is stored and accessed in a Windows® operating system. partition A logical division of a container, represented to the host as a logical unit. port 1.
Glossary 43 redundancy The provision of multiple, interchangeable components to perform a single function to cope with failures and erro rs. A RAID set is considered to be redundant when user data is recorded dir ectly to one member and all of the other members include associated parity information.
44 HP ProLiant Cluster F100 Installation Guide system A complete computer system cap able of operating independently. Transmission Control Protocol/Internet Protocol A suite of communication protocols deve loped to enable communication between different types of computers and networks.
45 Index F F100, over view 5 F200, over view 5 failback 12, 38, 42 A failover 6, 12, 38, 42 firmware, up dating 6 ACU (Array Configuration Utility) 6, 13, 18, 22, 26, 33 G ACU, installation 26 additio.
46 HP ProLiant Cluster F100 Installation Guide MSAFlash utility 24, 41 MSCS (Microsoft Cluster Server/Se rvice) 18, 24, 34 MSCS support matrix 24 multiple cluster guidelines 6 multiple cluster setup 2.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) F100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) F100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) F100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) F100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) F100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) F100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) F100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) F100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) F100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
