Benutzeranleitung / Produktwartung dv9200 des Produzenten HP (Hewlett-Packard)
Zur Seite of 303
Mainten ance an d Service Gui de HP P a v ili on d v9 000 and d v9 200 Notebook P C Doc ument P art Number: 417615 - 0 0 4 Decem ber 2 00 7 This guide is a troubleshooting reference used for maintaining and servicing the computer .
© Copyright 2006, 2007 He wlett-Packard Dev elopment Company , L.P . Microsoft, W i ndo ws, and W indows V ista are either trademarks or registered trademarks of Microsoft Corp oration in the United States and/or other countries.
Safety w arning notice Å WA R N I N G : T o r educe th e possibility of heat -r elated injuries or of ov erheating the computer , do not place t he computer directly on y ou r lap or obs t ru ct the computer air v ents. Us e the computer onl y on a hard , flat surface .
.
Maintenance and S ervi ce Guide i Cont ent s 1 Product Description 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 Resetting the Computer . . . . . . . . . . . . . . . . . . . . . . . 1–4 1.3 Power Management .
ii Maintenance and Service Guide Conte nts 4 Removal and Replac ement Preliminaries 4.1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1 4.2 Service Considerations . . . . . . . . . . . . . . . . . . . . . . . 4–2 Plastic Parts .
Cont ents Maintenance and S er v ice Guide iii 5.23 Power Connector Asse mbly . . . . . . . . . . . . . . . . . 5–71 5.24 System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–75 5.25 Fan/Heat Sink Assembly . . . . . . . . . . . .
iv Maintenance a nd Service Guide Conte nts.
Maintenance and S ervi ce Guide 1–1 1 Product D e sc ription The HP Pa vilion dv9000 Note book PC offers adv anced modularity , Intel® Core™ Du o processors, and e xtensive multimedia support.
1–2 Mainten ance and Service Gui de Produc t Descr iption 1. 1 F e a t u r e s ■ The follo wing processors are a vailab le, v arying b y computer model: ❏ Intel Core Duo T7200 (2 .00-GHz) ❏ Intel Core Duo T5600 (1 .83-GHz) ❏ Intel Core Duo T5500 (1 .
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–3 ■ T ouchPad pointing de vice with on/of f button and d edicated two-w ay scroll zone ■ Integrated 10/100/1000 Gigabit Ethernet local ar.
1–4 Mainten ance and Service Gui de Produc t Descr iption ❏ S-V ideo-out ❏ Uni versal Serial Bus (USB) v . 2.0 (4 ports) 1 .2 Resetting t he Com puter If the computer you are serv icing has an unkno wn password, follo w these steps to clear the password.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–5 1. 3 P o w e r M a n a g e m e n t The computer comes with po wer management features that extend battery operating time and conserv e power .
1–6 Mainten ance and Service Gui de Produc t Descr iption 1. 4 E x t e r n a l C o m p o n e n t s The external components on the front of the computer are shown below and described in T able 1-1. F r ont Components T able 1-1 Fr ont Components Item Component Function 1 P ower light On: The computer i s on.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–7 3 Drive light Blinking: The hard drive or optical drive is being accessed. 4 Wireless switch T urns the wirel ess f eature on or off, b ut does not create a wireless connection. ✎ A wireless network must be set up in order to establish a wireless connection.
1–8 Mainten ance and Service Gui de Produc t Descr iption The external components on the left side of the computer are sho wn belo w and described in T able 1-2. Lef t -Sid e Co mpo ne nt s T able 1-2 Left-Side Components Item Component Function 1 Security cable slot Attaches an optional security cable to the computer .
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–9 4 Expansion por t 3 Connects the computer to an optional e xpansion product. ✎ The computer has o nly one expansion port. The term expansion port 3 describes the type of expansion port. 5 RJ-45 (network) jack Connects a network cable.
1–1 0 Maintenance a nd Service Guide Produc t Descr iption The external components on the right side of the computer are sho wn belo w and described in T able 1-3.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–1 1 T able 1-3 Right-Side Components Item Component Function 1 USB por ts (2) Connect optional USB devices. 2 ExpressCard slot Suppor ts optional ExpressCard/54 cards. 3 Optical dr iv e Reads an optical disc.
1–1 2 Maintenance a nd Service Guide Produc t Descr iption The compute r ke yboard components a re sho wn belo w and described in T able 1-4. Ke yb o a r d C o m p o n e n t s.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–1 3 Ta b l e 1 - 4 Ke yboard Components Item Component Function 1 Function ke ys Ex ecute frequently used system functions when pressed in combination with the fn key . 2 caps lock ke y Enables caps lock and turns on the caps lock light.
1–1 4 Maintenance a nd Service Guide Produc t Descr iption The computer top components ar e sho wn b elo w and des cribed in T able 1-5. To p C o m p o n e n t s , Pa r t 1.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–1 5 T able 1-5 T op Components, P art 1 Item Component Function 1 Integrated camera (select models only) Records video and captures still photos. 2 Inter nal microphones (2, select models only) Record sound.
1–1 6 Maintenance a nd Service Guide Produc t Descr iption The computer top components ar e sho wn b elo w and des cribed in T able 1-6. To p C o m p o n e n t s , Pa r t 2.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–1 7 T able 1-6 T op Components, P art 2 Item Component Function 1 Media button If QuickPlay is not installed and the computer is ■ On, opens the music program or Media menu, which allows you to select a multimedia progr am.
1–1 8 Maintenance a nd Service Guide Produc t Descr iption 3 Previous/re wind but ton When a disc is play ing in the optical dr iv e: ■ Pla ys the previous tr ack or chapter , when pressed once. ■ Rewinds when pressed with the fn key . 4 Play/pause b utton When a disc is in the optical drive and is ■ Not pla ying, pla ys the disc.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–1 9 The computer T ouchPad components are shown belo w and described in T able 1-7. T ouchP ad Components T able 1-7 T ouchpad Components Item Component Function 1 T ouchP ad lig ht Blue: T ouchP ad is enabled.
1–20 Maintenance and Ser v ice Guide Produc t Descr iption The external components on th e bo ttom of the computer are sho wn belo w and described in T able 1-8. Bottom Components Ta b l e 1 - 8 Bottom Components Item Comp onent Function 1 Batter y bay Holds the batter y .
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–2 1 3 Optical dr iv e Reads an optical disc. 4 Secondar y hard dr iv e bay Holds an optional secondar y hard drive. Primar y hard dr iv e bay Hold the primar y hard dr iv e. 5 V ents (6) Enable airflo w to cool inter nal components.
1–2 2 Maintenance a nd Service Guide Produc t Descr iption 1. 5 D e s i g n o v e r v i e w This section presents a design o verview of ke y parts and features of the computer . Refer to Chapter 3, “Illustrated Parts Catalog, ” to identify replacement parts, and Chapter 5, “Re mov al and Replacement Procedures, ” for disassembly steps.
Maintenance and S ervi ce Guide 2–1 2 Tr o u b l e s h o o t i n g Å WA R N I N G : Onl y author iz ed techni cians tr ained by HP should r epair this equipment . All troubleshooting and repair pr oced ur es are detailed to allo w only subassembly-/module -l e vel repair .
2–2 Mainten ance and Service Gui de T ro ubleshooting 1. T o open the Setup Utility , turn on or restart the computer in W indows, and then press f10 while the prompt, “Press <F10> to enter setup, ” is displayed in the lower -left corner of the screen.
T rou bleshooting Maintenance and S ervi ce Guide 2–3 1. T o start the Setup Utility , turn on or restart the computer in W indows, and then press f10 while the prompt, “Press <F10> to enter setup, ” is displayed in the lower -left corner of the screen.
2–4 Mainten ance and Service Gui de T ro ubleshooting Using Adv an ced Setup Utilit y Features This guide describes the Setup Ut ility features recommended for all users.
T rou bleshooting Maintenance and S ervi ce Guide 2–5 ■ T o close the Setup Utility with out saving your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display . Then use the arro w keys to select Exit > Exit Discarding Changes , and then press enter .
2–6 Mainten ance and Service Gui de T ro ubleshooting Securit y Menu S ystem Configuration Menu Ta b l e 2 - 2 Security Menu Select T o Do Th is Administrator passw or d Enter , change, or delete an administrator password. P ower-on pass word Enter , change, or delete a power-on pass word.
T rou bleshooting Maintenance and S ervi ce Guide 2–7 Diagnostic s Menu Boot Options Set the follo wing boot options: ■ f10 and f12 Delay (sec.)—Set the dela y for the f10 and f12 functions of the Setup Utility in inter vals of 5 seconds each (0, 5, 10, 15, 20).
2–8 Mainten ance and Service Gui de T ro ubleshooting 2.2 Setup U tilit y in Windo w s Vista The Setup Utility is a R OM-base d information an d customization utility that can be used e ven when your W indo ws® operating system is not working or will not load.
T rou bleshooting Maintenance and S ervi ce Guide 2–9 5. T o set your preferences and exit the Setup Utility , press f10 and then follo w the inst ructions on the screen.
2–1 0 Maintenance a nd Service Guide T ro ubleshooting Restoring Default Set tings in th e Setup Utilit y The follo wing procedure explains how to restore the Setup Utility default setti ngs. If the Setup Utility is not already running, be gin at step 1.
T rou bleshooting Maintenance and S ervi ce Guide 2–1 1 The “Press <ESC> to change b oot order” mes sage that is displayed in the lo we r -left corn er of the screen each time the computer is started or restarted in W indows is the prompt to change the boot order .
2–1 2 Maintenance a nd Service Guide T ro ubleshooting Main Menu Securit y Menu S ystem Configuration Menu T able 2-1 Main Menu Select T o Do This System Information ■ View and change the system time and date. ■ View identification information about the computer .
T rou bleshooting Maintenance and S ervi ce Guide 2–1 3 Boot Options Set the follo wing boot options: ■ f10 and f12 Delay (sec.)—Set the dela y for the f10 and f12 functions of the Setup Utility in inter vals of 5 seconds each (0, 5, 10, 15, 20).
2–1 4 Maintenance a nd Service Guide T ro ubleshooting Diagnostic s Menu Ta b l e 2 - 4 Diagnostics Men u Select T o Do Th is Hard Disk Self T est Run a comprehensive self-test on the hard dr iv e. ✎ On models with two hard drives, this menu option is called the Primary Hard Disk Self Test.
T rou bleshooting Maintenance and S ervi ce Guide 2–1 5 2.3 T roublesh ooting Flo wc h arts T able 2-5 T rouble shooting Flowc harts Over vie w Flowc har t Description 2.1 “Flowchart 2.1—Initial T roubleshooting” 2.2 “Flowchart 2.2—No P ower , P ar t 1” 2.
2–1 6 Maintenance a nd Service Guide T ro ubleshooting Flowc har t Description 2.14 “Flowchart 2.14—No OS Loading, Op tical Drive” 2.15 “Flowchart 2.15—No A udi o , Part 1” 2.16 “Flowchart 2.16—No A udi o , Part 2” 2.17 “Flowchart 2.
T rou bleshooting Maintenance and S ervi ce Guide 2–1 7 Flo w char t 2. 1—Initial Tr ou blesh ooting Connecting to network or modem? Begin troubleshooting. Is there power? Is the OS loading? Is there video? (no boot) Is there sound? Beeps, LEDs, or error messages ? Keyboard/ pointing device working? Go to “Flowchart 2.
2–1 8 Maintenance a nd Service Guide T ro ubleshooting Flowc ha rt 2.2—N o Po wer , P a rt 1 1. Reseat the power cables in the dockin g device and at the AC outlet. 2. Ensure the AC power source is active. 3. Ensure that the power strip is working.
T rou bleshooting Maintenance and S ervi ce Guide 2–1 9 Flowc ha rt 2.3—N o P ow e r , P a rt 2 Continued from “Flowchar t 2.2—No P ower , Pa r t 1 . ” Visually check for debris in battery socket a nd clean if necessary . Done N Y Pow er o n? Check battery by recharging it, moving it to another computer , or replacing it.
2–20 Maintenance and Ser v ice Guide T ro ubleshooting Flowc ha rt 2.4—N o Po wer , P a rt 3 Continued from “Flowchart 2.3—No P ower , Pa r t 2 . ” Reseat AC adapt er in computer and at powe r source. Internal or external AC adapter? Done Done Done Done Pow er o n? Po wer on ? Pow er o n? Plug directly into AC outlet.
T rou bleshooting Maintenance and S ervi ce Guide 2–2 1 Flowc ha rt 2.5— No P ow er , Part 4 Y N Continued fro m “Flowchart 2.4—No P ower , Pa r t 3. ” Reseat loose components and boards and replace damaged items. Open computer . Loose or damaged parts? Y Close computer and retes t.
2–2 2 Maintenance a nd Service Guide T ro ubleshooting Flowc ha rt 2.6—N o Vi deo , P a rt 1 A N Stand-alone or docking device? No video. Replace the following one at a time. T est after each replacement. 1. Cable between comput er and computer disp lay (if applicable) 2.
T rou bleshooting Maintenance and S ervi ce Guide 2–2 3 Flowc ha rt 2.7—N o Vi deo , P a rt 2 Y N Continued from “Flowchar t 2.6—No Video , Pa r t 1 .
2–2 4 Maintenance a nd Service Guide T ro ubleshooting F lo wcha rt 2 .8— Non fu ncti oni ng D ocki ng D e v ice (if applicable) Y N Reseat power cord in docking device and power outlet. N Check voltage setting on docking device. Reset monitor cable connector at docking devic e.
T rou bleshooting Maintenance and S ervi ce Guide 2 –2 5 Flo wc hart 2.9—No O perating Sy stem (OS) Loadin g No OS loading from hard drive, go to “Flowchart 2.10—No OS Loading, Hard Drive, P ar t 1. ” Reseat po wer cord in docking device and power outlet.
2–2 6 Maintenance a nd Service Guide T ro ubleshooting Flo wc hart 2. 1 0—No OS Loa ding , Hard Dri v e, Pa r t 1 Go to “Flowchart 2.17—Nonfunctioning Device. ” Y Done N OS not loading from hard drive. Nonsyste m disk message? Go to “Flowchart 2.
T rou bleshooting Maintenance and S ervi ce Guide 2–2 7 Flo wc hart 2. 1 1—No OS Loa ding, H ard Dri v e, Pa r t 2 Load OS using Operating System disc (if applicable). Continued from “Flowchart 2.10—No OS Loading, Hard Driv e, P ar t 1. ” Reseat hard drive.
2–2 8 Maintenance a nd Service Guide T ro ubleshooting Flo wc hart 2. 1 2—No OS Loa ding , Hard Driv e, Pa r t 3 Y System files on hard drive? Continued from “Flowc hart 2.11—No OS Loading, Hard Drive, P ar t 2. ” Clean virus. Done N Install OS and reboot.
T rou bleshooting Maintenance and S ervi ce Guide 2–29 Flo wc hart 2. 1 3—No OS Loa ding, Disk et te Dri v e Replace the following components individually , retesting after each replacement: ■ Diskette drive ■ System board Done Y N Reseat diskette drive.
2–30 Maintenance and Service Guide T ro ubleshooting Flo wc hart 2. 1 4—N o OS Loading , Optical Driv e Y Done N Bootable disc in drive? Disc in driv e? No OS loading from CD-ROM or DVD-ROM drive. Install bootable disc and reboot computer . Go to “Flowchar t 2.
T rou bleshooting Maintenance and S ervi ce Guide 2–3 1 Flo wc hart 2. 1 5—No Audio, P art 1 No audio. N Computer in docking device (if applicable)? Internal audio? Audio? Done Undock Audio? Done Tu r n u p a u d i o internally or externally . Go to “Flowchart 2.
2–3 2 Maintenance a nd Service Guide T ro ubleshooting Flo wc hart 2. 1 6—No Audio, P art 2 YN Continued from “Flowchar t 2.15—No Audio , Pa r t 1 . ” Reload audio drivers. Audio driver in OS configured? Audio? Y Y Y N N N Correct drivers for app li cati on? Connect to external speaker .
T rou bleshooting Maintenance and S ervi ce Guide 2–33 Flo wc hart 2. 1 7—Nonfunc tioning De vice Done Any physical device detect ed? Y N Unplug the nonfunct ioning device from the computer and inspect cables and plugs for bent or brok en pins or other damage.
2– 34 Ma in ten an ce an d S er vice G uid e T ro ubleshooting Flo wc har t 2. 1 8 —Nonfunc tioning K e yboard Y N Keyboard operating properly? Keyboard not operating properly . External device works? Replace system board. Replace system board. Connect comput er to good external keyboard.
T rou bleshooting Maintenance and S ervi ce Guide 2–35 Flo wc hart 2. 1 9—Nonfunctionin g P ointing Dev ice Y N Poi ntin g de vice not operating properly . External device works? Replace system board. Replace system board. Connect computer to good external pointing device.
2–36 Maintenance and Service Guide T ro ubleshooting Flo wc hart 2.20—No N etwork/Modem Connec tion Y Disconnect all power from the computer and open. No netwo rk or modem connection. N Done Digital line? Network or m odem jack active? Replace jack or have jack activated.
Maintenance and S ervi ce Guide 3–1 3 I llustrated P arts C atal og This chapter provides an illustrated parts breakdown and a reference for spare part numbers and option part numbers.
3–2 Mainten ance and Service Gui de Illustr ated P arts Catalog 3.2 Compu ter Major Com ponents Computer Major Components.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–3 T able 3-1 Spare P ar ts: Computer Major Components Item Description Spare Part Number 1 Display assemblies (include wireless antenna transceivers and cables) F or use with full-featured computer models (includes camera, camera cable , and microphones): 17.
3–4 Mainten ance and Service Gui de Illustr ated P arts Catalog Computer Major Components.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–5 T able 3-1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare Part Number 5 Keybo ards F or use in the follo .
3–6 Mainten ance and Service Gui de Illustr ated P arts Catalog Computer Major Components.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–7 T able 3-1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare Part Number 10 Wireless switc h board (includes.
3–8 Mainten ance and Service Gui de Illustr ated P arts Catalog Computer Major Components.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–9 T able 3-1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare Part Number 15 Processors (include thermal pad) Intel Core Duo T7200 (2.00-GHz) Intel Core Duo T5600 (1.
3–1 0 Maintenance a nd Service Guide Illustr ated P arts Catalog Computer Major Components.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–1 1 T able 3-1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare Part Number 21 Base enclosures (include wirel.
3–1 2 Maintenance a nd Service Guide Illustr ated P arts Catalog Computer Major Components.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–1 3 T able 3-1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare Part Number 25 Mini Card modules 802.11a/b/g WLAN Mini Ca rd module for use in the countries or reg ions listed below .
3–1 4 Maintenance a nd Service Guide Illustr ated P arts Catalog Computer Major Components.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–1 5 T able 3-1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare Part Number 25 Mini Card modules (Continued) 802.11a/b/g WLAN Mini Ca rd module for use in the countries or reg ions listed below .
3–1 6 Maintenance a nd Service Guide Illustr ated P arts Catalog Computer Major Components.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–1 7 T able 3-1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare Part Number 25 Mini Card modules (Continued) F or use only with models using AMD processors: Broadcom 802.
3–1 8 Maintenance a nd Service Guide Illustr ated P arts Catalog Computer Major Components.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–1 9 T able 3-1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare Part Number 27 Optical drives (include bezel).
3–20 Maintenance and Ser v ice Guide Illustr ated P arts Catalog 3. 3 Display Assembl y Components Disp lay Assembly Componen ts T able 3-2 Displa y Assembl y Components Spare P ar t Number Inf orma.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–2 1 2 Display Hinge Kit (includes left and r ight displa y hinges) F or use with Dual Lamp display panels F or use with Single Lamp disp.
3–2 2 Maintenance a nd Service Guide Illustr ated P arts Catalog 3 .4 Mass Stor age De vi ce s Mass S torage De vi ces T able 3-3 Mass Storage Devices Spare P ar t Number Inf ormation Item Descripti.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–2 3 F or use with all computer models 200-GB (4200-r pm) 160-GB (5400-r pm) 120-GB (5400-r pm) 100-GB (7200-r pm) 80-GB (5400-r pm) 4414.
3–2 4 Maintenance a nd Service Guide Illustr ated P arts Catalog 3.5 Pla s ti c s K it P l as tics K it Components.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3 –2 5 T able 3-4 Plastics Kit Spare P ar t Number Inf ormation Item Descriptio n Spare P art Number Plastics Kit 432981-001 1 2 3 4 Inclu.
3–2 6 Maintenance a nd Service Guide Illustr ated P arts Catalog 3 .6 Cable Kit Cabl e Kit Comp one nts.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–2 7 T able 3-5 Cable Kit Spare P ar t Number Inf ormation Item Descriptio n Spare P art Number Cable Kit 434677-001 1 2 3 4 5 Includes: .
3–2 8 Maintenance a nd Service Guide Illustr ated P arts Catalog 3.7 Miscellaneous T able 3-6 Spare P arts: Miscellaneous Description Spare P art Number A C adapters HP 90-W PFC AC adapter HP 90-W n.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–29 TV tuner , ExpressCard 439130-001 TV tuner ante nna 439131-001 Wireless laser mouse 430958-001 Express card kit, HD-D VD (with driver.
3–30 Maintenance and Service Guide Illustr ated P arts Catalog Screw Kit (include the f ollowing scre ws; refe r to Appendix A, “Scre w Listing, ” for more information on screw specifications an.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–3 1 3.8 Sequential P ar t Number Listing T able 3-7 Spare P arts: Sequential Part Number Listing Spare P art Number Description 364727-0.
3–3 2 Maintenance a nd Service Guide Illustr ated P arts Catalog 407674-001 802.11a/b/g WLAN Mini Card modu le f or use in the MOW1 countries and regions listed below: Antigua & Barbuda Argentin.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–33 Spare P art Number Description 407674-003 802.11a/b/g WLAN Mini Card modu le f or use in the RO W countries and regions listed below: China Ecuador Haiti Honduras P akistan Pe r u Qatar South K orea 407674-004 802.
3– 34 Ma in ten an ce an d S er vice G uid e Illustr ated P arts Catalog Spare P art Number Description 432947-001 17.0-inch, SXGA+, TFT Single Lamp display assembly with BrightView (includes camera, camera cable , microphones, wireless antenna transceivers, and cab les) 432948-001 17.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–35 Spare P art Number Description 432959-001 Display in ver ter f or use with Dual Lamp display panels 432960-001 Camera module 432961-0.
3–36 Maintenance and Service Guide Illustr ated P arts Catalog 432982-001 Rubber kit for models with AMD processors 432983-001 Escrow Kit f o r use only with computer models using AMD processors 432.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–3 7 Spare P art Number Description 434660-001 G73 system board f or use in models with Intel processors (includes 512-MB of video RAM and the rmal pad) 434661-001 802.11a/b/g EWC WLAN mo dule f or use in most of the w orl d 434661-002 802.
3–38 Maintenance and Service Guide Illustr ated P arts Catalog 436068-001 Display beze l for use with Dual Lamp displa y pa nels without came ra 436157-001 Intel Core Duo T5500 (1.66-GHz) processor (includes ther mal pad), f o r use with dv9200 models 436238-001 Optical wired mouse 436257-001 AMD T urion ML-60 2.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3 –3 9 Spare P art Number Description 439131-001 TV tuner antenna 439254-001 Remote control, ExpressCard (EMEA) 441075-001 Broadcom 4311AG 802.11a/b/g WLAN module for use in most of the world 441090-001 Broadcom 802.
3–40 Maintenance and Service Guide Illustr ated P arts Catalog Spare P art Number Description 441541-171 K eyboard for use in Saudi Arabia 441541-251 K eyboard for use in Russia 441541-281 K eyboard.
Illustr ated P arts Catalog Maintenance and S ervi ce Guide 3–4 1 448003-001 2048-MB memor y module, PC-5300, 667-MHz, 1-DIMM f or use only with models using AMD processors 450370-001 Processor brack et 7.9, f or use with the f ollowing processors: 434730-001 43473 1-001 436157-001 436900-00 1 446814-001 450371-001 Processor brack et 8.
3–4 2 Maintenance a nd Service Guide Illustr ated P arts Catalog.
Maintenance and S ervi ce Guide 4–1 4 Remo v al an d Repl acem ent Preliminaries This chapter provides essentia l information for proper and safe remov al and re placement service.
4–2 Mainten ance and Service Gui de Remo val and Replacement Preliminaries 4.2 Service C onsiderations The follo wing sections include some of the considerations that you shoul d keep in mind during disassembly and assembly procedures.
Remo val and Replacement P r el iminar ies Maintenance and S ervi ce Guide 4–3 4. 3 Pr e v ent ing Damage to Re mo v able Dri v es Remov able dri ves are fragile componen ts that must be handled with care.
4–4 Mainten ance and Service Gui de Remo val and Replacement Preliminaries 4.4 Pre v entin g Elec trostatic D ama ge Many electronic components ar e sensiti ve to electrostatic dischar ge (ESD). Circuitry design an d structure determine the degree of sensiti vity .
Remo val and Replacement P r el iminar ies Maintenance and S ervi ce Guide 4–5 4.5 P ack a ging and T ranspor ting Precautions Use the follo wing grounding precautions when packaging and transporting equipment: ■ T o av oid hand contact, tr ansport prod ucts in static- safe containers, such as tube s, bags, or bo xes.
4–6 Mainten ance and Service Gui de Remo val and Replacement Preliminaries 4.6 W orksta tion Precautions Use the follo wing grounding pr e cautions at w orkstations: ■ Cov er the workstation with appr o ved static-shielding material (refer to T a ble 4-2, “Static-Shielding Materials” ).
Remo val and Replacement P r el iminar ies Maintenance and S ervi ce Guide 4–7 4.7 Grounding E quipmen t and Methods Grounding equipment must in clude either a wrist strap or a foot strap at a grounded workstati on. ■ When seated, wear a wrist strap connected to a grounded system.
4–8 Mainten ance and Service Gui de Remo val and Replacement Preliminaries T able 4-1 shows ho w humidity affects the electrostatic v oltage le vels generated b y different acti vities. T able 4-2 lists the shielding protection provided b y antistatic bags and floor mats.
Maintenance and S ervi ce Guide 5–1 5 Remo v al an d Repl acem ent Procedur es This chapter provides remov al and replacement proce dures. There are as many as 109 scre ws, in 11 different sizes, that must be remov ed, replaced, or loosen ed when servicing the computer .
5–2 Mainten ance and Service Gui de Remo val and Replacement P r oced ur es 5. 1 S e r i a l N um be r Report the comp uter serial number t o HP when requesting information or ordering spare parts. The serial number is located on the bottom of the compute r .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–3 Section Descript ion # of Screws Remo ved 5.4 Hard Drive 2 loosened to remov e each hard drive cov er 4 remov ed to disasse mb le each hard dr iv e 5.5 Compute r F eet 0 5.
5–4 Mainten ance and Service Gui de Remo val and Replacement P r oced ur es Section Descript ion # of Screws Remo ved 5.14 Displa y Assembly Display bez el Camera module Displa y inv er ter Display panel Display hinges Displa y hinge cove rs Wireless antenna transceivers Microphones Camera cable 6 5 0 0 6 4 0 4 0 0 5.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–5 5 .3 Preparing t he C ompu ter F or Disa ssembly Before you begin any remo va l or installation procedures: 1.
5–6 Mainten ance and Service Gui de Remo val and Replacement P r oced ur es b . Slide and hold the battery release latch 1 to the l eft. (The front edge of the battery disengag es from the computer .) c. Lift the front edge of the battery 2 and swing it back.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–7 5 .4 Hard Driv e Har d Drive Spare P art Number Information Hard drives (include brack et an d connector) F or use onl.
5–8 Mainten ance and Service Gui de Remo val and Replacement P r oced ur es 1. Prepare the co mputer fo r disassembly (refer to Section 5.3 ). 2. Loosen the two capti ve Phillips PM2.0×5.0 scre ws 1 that secure each hard driv e cover to the computer .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–9 5. Use the mylar tab 1 to lift the hard dri ve 2 until it disconnects from the computer .
5–1 0 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 7. Remov e the four Ph illips PM3.0×3.0 screws 1 that secure the hard dri ve bracket to the hard driv e. 8. Lift the bracket 2 strai ght up to remov e it from the hard driv e.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–1 1 5. 5 C o m p u t e r Fe e t The computer feet are adhesiv e-ba cked rubber pads. The feet are included in the Rub ber Feet Kit, spare part number 43298 2-001. The feet attach to th e base enclosure in the locations illustrated below .
5–1 2 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 5 .6 Memor y Modul e 1. Prepare the co mputer fo r disassembly (refer to Section 5.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–1 3 2. Loosen the two capti ve Phillips PM2.0×5.0 scre ws 1 that secure the memory module compartment cov er to the computer . 3. Lift the front of the memo ry module compartment cov er 2 , and then swing it back.
5–1 4 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 5. Spread the retaining tabs 1 on each side of the memory module socket to release the memory module. (The edge of the module opposite the socket rises a way from the computer .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–1 5 5. 7 R TC B a t t e r y 1. Prepare the co mputer fo r disassembly (refer to Section 5.3 ). 2. Remov e the memory module compartment co ver ( Section 5.6 ). 3. Disconnect the R TC battery cable 1 from the system board.
5–1 6 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 5 .8 M ini Card Module Mini Car d Module Spare P ar t Number Informa tion F or use only with models using Intel processors: 802.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–1 7 1. Prepare the co mputer for disass embly ( Section 5.3 ). 2. Remov e the memory module compartment co ver ( Section 5.
5–1 8 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 3. Make note of which wireless antenna cable is attached to which antenna clip o n the Mini Card module before disconnecting the ca bles. Then disconnect the ca bles 1 from the module.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–1 9 5 .9 Optical Driv e 1. Prepare the co mputer for disass embly ( Section 5.3 ). 2. Remov e the Phillips PM2.5×8.0 scre w 1 that secures the optical dri ve to the computer .
5–20 Maintenance and Ser v ice Guide Remo val and Replacement P r oced ur es 5. Remov e the optical dri ve. R emo ving the Opti cal Dri ve 6. Position the optical dri ve w ith the optical dri ve bracket to ward you. 7. Remov e the two Phillips PM2.0×3.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–2 1 8. Remov e the optical dri ve bracket 2 . R emov ing the Optical Dr i ve Br ack et Re verse the abov e procedure to re assemble and install the optical dri ve.
5–2 2 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 5. 1 0 Sw it c h C over 1. Prepare the co mputer for disass embly ( Section 5.3 ). 2. Close the computer . 3. T urn the comp uter upside down with the front panel to ward you.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–2 3 Rem ovi ng th e Switch Cove r S crews.
5–2 4 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 5. T urn the computer display-side up with the front to ward you. 6. Open the computer as far as possible. 7. Lift the rear edge of the switch co ver and swing it forward until it rests on the ke yboard.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5 –2 5 8. Release the zero insertion force (ZIF) connector 1 to which the LED board cable is connec ted and discon nect the cable 2 from the LED board. 9. Remov e the switch co ver .
5–2 6 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 5. 1 1 Ke y b o a rd 1. Prepare the co mputer for disass embly ( Section 5.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–2 7 3. Remov e the Phillips PM2.5×7.0 scre w that secures the ke yboard to the computer .
5–2 8 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 4. T urn the computer display-side up with the front panel to ward you. 5. Open the computer as far as possible. 6. Remov e the three silv er Phillips PM2.5×5.0 screws that secure the ke yboard to the computer .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–29 7. Lift the rear edge of the keyboard 1 until it rests at an angle. 8. Slide the ke yboard 2 back to disengage the tabs on the front edge of the ke yboard from the top cov er .
5–30 Maintenance and Service Guide Remo val and Replacement P r oced ur es 10. Release the ZIF connector 1 to which the k eyboard cable is connected and disconnect the ke yboard cable 2 from the system board. Disconnec ting the K ey board Cable 11. Remov e the keyboard.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–3 1 5. 1 2 S p e a k e r A s s e m b ly 1. Prepare the co mputer for disass embly ( Section 5.3 ). 2. Remov e the switch co ver ( Section 5.10 ). 3. Remov e the keyboard ( Sectio n 5.
5–3 2 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 6. Remov e the tw o black Phillips PM2.5×5.0 screws 1 that secure the speaker assembly to the computer . 7. Remov e the speak er assembly 2 . R emo vin g the Speak er Assembl y Rev erse the above procedure to install the speaker assembly .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–33 5 . 1 3 P o w er Butto n Boa rd 1. Prepare the co mputer for disass embly ( Section 5.3 ). 2. Remov e the switch co ver ( Section 5.10 ). 3. Remov e the keyboard ( Sectio n 5.
5– 34 Ma in ten an ce an d S er vice G uid e Remo val and Replacement P r oced ur es 6. Remov e the silv er Phillips PM2.5×5.0 screw 1 that secures the po wer button board to the computer . 7. Remov e the power b utton board 2 . Rem ovi ng th e P owe r B ut to n Bo ar d Re verse the abov e procedure to install the po wer button board.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–35 5 . 1 4 Di spl a y Assembly 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Memory module comp artment co ver ( Section 5.
5–36 Maintenance and Service Guide Remo val and Replacement P r oced ur es 2. Close the computer . 3. T urn the computer upside do wn with the rear panel to ward you. 4. Remov e the tw o Phillips PM2.5×8.0 screws that secure the display assembly to the computer .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–3 7 5. T urn the computer display-side up with the front to ward you. 6. Open the computer to an upright position. 7. Disconnect the display cable 1 from the system board and the microphone cable 2 from the po wer button board.
5–38 Maintenance and Service Guide Remo val and Replacement P r oced ur es Ä CAUT ION: Suppo rt the display a ssembl y when r emov i ng the f ollow ing scr ew s. F ailure to su ppor t the displa y assembl y can result in damage to the display assembl y and other computer components.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5 –3 9 12. Remov e the following: 1 Three rubber scre w cov ers on the display bezel top edge 2 T wo rubber screw cov ers on the display bezel bottom edge 3 Fi ve Phillips PM 2.
5–40 Maintenance and Service Guide Remo val and Replacement P r oced ur es 13. Flex the inside edges of the left and right sides 1 and the top and bottom sides 2 of the display bezel until the bezel disengages from the display enclosure. 14. Remov e the display bezel 3 .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–4 1 ✎ The camera m odule is secured to the display en closure b y a 2-sided adhesive pad. Apply removal force to the middle of the module to remov e it. 15. Remov e the camera module 1 from the display enclosure.
5–4 2 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 17. Remov e the in verter 1 from the display enclosure. 18. Disconnect the display cable 2 and t he backlight cable 3 from the display in verter .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–43 19. Remov e the six Phillips PM2.5×8.0 screws 1 that secure the display panel to the displ ay enclosure. 20. Remove the display panel 2 . Rem ovi ng th e Di sp l ay Pan el Display Assembl y Subcomponents Spare P ar t Number Inf ormation Display panels 17.
5–44 Maintenance and Ser v ice Guide Remo val and Replacement P r oced ur es 21. Remov e the two Phillips PM2.0×3.0 scre ws 1 that secure each display hinge to the display enclosure. 22. Remov e the display hinges 2 . 23. Slide the left and right display hinge cov ers 3 off of the display hinges.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–45 24. If it is necessary to replace th e wireless antenna transceivers and cables, remov e the two Phillips PM2.0×4.0 scre ws 1 that secure each transceiv er to the display enclosure .
5– 46 Ma in ten an ce an d S er vice G uid e Remo val and Replacement P r oced ur es 28. If it is necessary to replace the microphones and cables, release the retention tabs 1 b uilt into the display enclosure that secure the microphone cables to the display enclosure.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–4 7 31. If it is necessary to repl ace the camera cable, release the retention tabs 1 b uilt into the display enclosure that secure the camera cable to the display enclosure.
5–48 Maintenance and Service Guide Remo val and Replacement P r oced ur es 5. 1 5 T o p C ove r 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Hard driv e ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5 –4 9 2. T urn the comp uter upside do wn with the front toward you. 3. Remov e the eight Phillips PM2.
5–50 Maintenance and Service Guide Remo val and Replacement P r oced ur es 4. Remov e the four silv er Phillips PM2.5×5.0 screws that secure the top cov er to the computer .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–5 1 5. T urn the computer right-side up with the fro nt to ward you. 6. Disconnect the po wer button board cable 1 and the LED board cable 2 from the lo w insertion force (LIF) connectors to which the y are connected.
5–5 2 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 8. Remov e the f ive Phillips PM2.5×8.0 scre ws 1 and the silver Phillips PM2.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–5 3 9. Lift the rear edge of the top co ver until it disengages from the computer , and remov e the top cov er . Rem ovi ng th e T o p Cover Re verse the abo ve procedure to install the top co ver .
5– 54 Ma in ten an ce an d S er vice G uid e Remo val and Replacement P r oced ur es 5. 1 6 Wi r e l e s s Swi t c h B o a r d 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Hard driv e ( Section 5.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–5 5 2. Release the ZIF connector 1 to which the wireless switch board cable is connected and di sconnect the wireless switch board cable 2 from the sy stem board.
5–5 6 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 3. Remov e the two silver Philli ps PM2.5×5.0 scre ws 1 that secure the wireless switch board to the base enclosure. 4. Remov e the wireless switch board 2 . Re mov ing the W i r eless S witc h Board Re verse the abov e procedure to in stall the wi reless switch board.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–5 7 5 . 1 7 Audio B oar d 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Hard driv e ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
5–5 8 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 2. Remov e the silv er Phillips PM2.5×5.0 screw 1 that secures the audio bo ard to the computer . 3. Slide the audio board 2 back to disengage the aud io connectors from the base enclosure.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–5 9 5 . 1 8 Bluetoot h Module 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Hard driv e ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
5– 60 Ma in ten an ce an d S er vice G uid e Remo val and Replacement P r oced ur es 2. Disconnect the Bluetooth modu le cable 1 from the system board. ✎ The Bluetooth module cable is included with the Bluetooth module spare part kit and is al so included in the Cable Kit, spare part number 434677 -001.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–6 1 5. 1 9 U S B / M a g n e t i c B o a r d 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Hard driv e ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
5–6 2 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 2. Disconnect the USB/magnetic board cable 1 from the ExpressCard assembly . ✎ The USB/magnetic board cabl e is included with the USB/magnetic board spar e part k it and is also included in the Cable Kit, spare part numb er 434677-001.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–63 5 .20 Expres sCard A ssem bly 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Hard driv e ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
5–64 Mainten ance and Service Guide Remo val and Replacement P r oced ur es 2. Push in on the ExpressCard slot bezel 1 to release the bezel from the ExpressCard slot. 3. Remov e the ExpressCard slot bezel 2 . ✎ The ExpressCard slot bezel is included in the Plastics Kit, spare part number 432981 -001.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–65 4. Remov e the four silv er Phillips PM2.5×5.0 screws 1 that secure the ExpressCard asse mbly to the system board. 5. Slide the ExpressCard assembly 2 to the right to disconnect it from the system board.
5–66 Maintenance and Service Guide Remo val and Replacement P r oced ur es 5. 2 1 T o p C ove r S u p p or t Tr im 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Hard driv e ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–6 7 2. T urn the comp uter upside do wn with the front toward you. 3. Remov e the four Phillips PM2.5× 8.0 screws that secure the top cov er support trim to the computer .
5–68 Maintenance and Service Guide Remo val and Replacement P r oced ur es 4. T urn the computer right-side up with the fro nt to ward you. 5. Remov e the Phillips PM2.5×8.0 screw 1 that secures the top cov er support trim to the computer . 6. Remov e the top co ver support trim 2 .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–6 9 5 .2 2 Dis play Lid S witch Module 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Hard driv e ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
5–7 0 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 2. Remov e the display lid switch module by f irmly pulling it of f the fan/heat sink assembly . ✎ The display lid switch module is secured to the fan/heat sink assembly by 2-sided tape.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–7 1 5. 23 P owe r C o n n e c t o r A s s e m b l y 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Hard driv e ( Section 5.
5–7 2 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 2. Remov e the two silver Philli ps PM2.5×5.0 scre ws 1 that secure the power connector assembly brack et to the computer . 3. Remov e the po wer connector assembly bracket 2 .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–7 3 4. Remov e the silv er Phillips PM2.5×5.0 screw 1 that secures the USB board to the computer . 5. Remov e the USB board 2 . 6. Disconnect the USB board cable 3 from the USB board and remov e the cable from the clips 4 in the base enclosure.
5–7 4 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 7. Remov e the black Phill ips PM2.5×5.0 screw 1 that secures the po wer connector assembly to the computer . 8. Remov e the po wer connector assembly 2 from its location in the base enclosure.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–7 5 5. 24 Sys t e m B o a r d ✎ When replaci ng the system boar d, ensure that the follo wing components are remov e d from the defecti ve system board and installed on the replacement system board: ■ Memory modules ( Section 5.
5–7 6 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es ❏ T op c over ( Section 5.15 ) ❏ W ireless switc h board ( Section 5.16 ) ❏ Audio board ( Section 5.17 ) ❏ USB/magnetic board ( Section 5.19 ) ❏ T op cover support trim ( Section 5.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–77 4. Remov e the three Phillips PM2.5×8.0 scre ws 1 and the three silver Phillips PM2.
5–7 8 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es 5. Lift the right side of the system board 1 until it rests at an angle. 6. Remov e the optical dri ve connector board 2 . ✎ The optical d ri ve co nnector board is a vail able using spa re part number 432992-001.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–7 9 9. If it is necessary to replace the power connector assembly or the USB board cable, turn the system board up side do wn with the front to ward you. 10. Disconnect the po wer connector assembly cable 1 and the USB board cable 2 from the system boar d.
5–80 Mainten ance and Service Guide Remo val and Replacement P r oced ur es 5 .25 F an/Hea t Sink Assemb l y ✎ When replacing the fan/heat sink assembly , be sure the display lid switch module is remov ed fro m the defective f an/heat sink assembly and installed on the replacement fan/heat sink assembly .
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–8 1 2. T urn the system board upside do wn with the e xpansion port and external monitor port to ward you. 3. Disconnect the fan cable 1 from the system board. 4. Loosen the four captive Phillips PM2.
5–8 2 Maintenance a nd Service Guide Remo val and Replacement P r oced ur es ✎ The thermal pads and thermal paste shou ld be thorough ly cleaned from the surfaces of the fan/heat sink assembly 1 , 2 , and 3 , the system board components 4 and 6 , and the processor 5 each time the fan/heat sink assembly is remo ved.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–83 6. Loosen the three captiv e silv er Phillips PM2.5× 5.0 scre ws 1 that secure the heat si nk to the system board.
5–84 Maintenance and Service Guide Remo val and Replacement P r oced ur es ✎ The thermal pads and thermal paste shou ld be thorough ly cleaned from the surfaces of the heat sink 1 , 2 , and 3 and the system board components 4 , 5 , and 6 , each time the he at sink is remov ed.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–85 5. 26 P ro c e s s o r 1. Prepare the co mputer for disass embly ( Section 5.3 ) and remov e the following components: ❏ Hard driv e ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
5–86 Maintenance and Service Guide Remo val and Replacement P r oced ur es ❏ Switch cov er ( Section 5.10 ) ❏ K eyboard ( Section 5.11 ) ❏ Speaker assembly ( Section 5.12 ) ❏ Display assembly ( Section 5.14 ) ❏ T op c over ( Section 5.15 ) ❏ W ireless switc h board ( Section 5.
Rem oval an d Rep la ce men t P roc edu res Maintenance and S ervi ce Guide 5–8 7 2. T urn the processor locking screw 1 one-half turn counterclockwise until you hear a click.
5– 88 Ma in ten an ce an d S er vice G uid e Remo val and Replacement P r oced ur es.
Maintenance and S ervi ce Guide 6–1 6 Spec if ica tions This chapter provides physical and performan ce specif ications. T able 6-1 Computer Dimensio ns With Dual Lamp Display Length Width Height (varies front to rear) 28.5 cm 39.6 cm 3.2 to 4.2 cm 11.
6–2 Mainten ance and Service Gui de Spe cificat ions T emperature Opera ting* Nonoperating 5°C to 35°C -20°C to 60°C 41°F to 95°F -4°F to 140°F Relative humidity (noncondensing) Operating Nonoperating 10% to 90% 5% to 95%, 38.7°C (101.6°F) maximum wet b ulb temperature Maximum altitude (unpressurized) Operating (14.
Spe cificat ions Maintenance and S ervi ce Guide 6–3 T able 6-2 17.0-inch, WSXGA+, TFT Displa y Dimensio ns Height Width Diagonal 23.00 cm 36.90 cm 43.40 cm 9.06 in 14.49 in 17.09 in Number of colors Up to 16.8 mil lion Contrast ratio 200:1 Brightness 180 nits typical Pixel resolution Pitch Fo r ma t Configuration 0.
6–4 Mainten ance and Service Gui de Spe cificat ions T able 6-3 17.0-inch, WXGA+, TFT Displa y Dimensio ns Height Width Diagonal 23.00 cm 36.90 cm 43.40 cm 9.06 in 14.49 in 17.09 in Number of colors Up to 16.8 mil lion Contrast ratio 200:1 Brightness 180 nits typical Pixel resolution Pitch Fo r ma t Configuration 0.
Spe cificat ions Maintenance and S ervi ce Guide 6–5 Ta b l e 6 - 4 Hard Drives 160-GB* 120-GB* Dimensio ns Height Width W eight 9.5 mm 70 mm 102 g 9.
6–6 Mainten ance and Service Gui de Spe cificat ions 100-GB* 80-GB* Dimensio ns Height Width W eight 9.5 mm 70 mm 102 g 9.5 mm 70 mm 102 g Interface type ATA - 5 ATA - 5 T ransfer rate Synchronous (.
Spe cificat ions Maintenance and S ervi ce Guide 6–7 T able 6-5 Primary 8-cell, Li-Ion Battery Dimensio ns Height Width Depth W eight 1.83 cm 27.18 cm 5.23 cm 0.34 kg 0.72 in 10.70 in 2.06 in 0.75 lb Energ y V oltage Amp-hour capacity W att-h our capacity 14.
6–8 Mainten ance and Service Gui de Spe cificat ions T able 6-6 D VD/CD-R W Combo Drive Applicab le disc Read: D VD- R, D VD-R W , D VD-R OM (D VD-5, DV D - 9 , DV D - 1 0 , DV D - 1 8 ) , CD-ROM (M.
Spe cificat ions Maintenance and S ervi ce Guide 6–9 T able 6-7 D VD±R W/R and CD-R W Double-Lay er Combo Drive Applicabl e disc Read: D VD-R, D VD-R W , D VD-ROM (D VD-5, D VD-9, D VD-10, DV D - 1.
6–1 0 Maintenance a nd Service Guide Spe cificat ions T able 6-8 System DMA Har dware DMA System Fun ction DMA0 Not applicable DMA1 Not applicable DMA2 Not applicable DMA3 Not applicable DMA4 Direct.
Spe cificat ions Maintenance and S ervi ce Guide 6–1 1 T able 6-9 System Interrupts Hard ware IRQ S ystem Fu nction IRQ0 System timer IRQ1 Quick Launch buttons IRQ2 Cascaded IRQ3 USB2 Enhance d Host.
6–1 2 Maintenance a nd Service Guide Spe cificat ions Hard ware IRQ S ystem Fu nction IRQ12 Synaptics PS/2 port pointi ng de vice IRQ13 Numeric data processor IRQ14 P rimar y IDE channel IRQ15 Secon.
Spe cificat ions Maintenance and S ervi ce Guide 6–1 3 T able 6-10 System I/O Addresses I/O Address (he x) System Fu nction (shipping configuration) 0x00000000-0x00000C F7 PCI bus 0x00000000-0x00000.
6–1 4 Maintenance a nd Service Guide Spe cificat ions I/O Address (he x) System Fu nction (shipping configuration) 0x000001F0-0x000001F7 Primar y IDE Channel 0x00000220-0x000002 2F System board reso.
Spe cificat ions Maintenance and S ervi ce Guide 6–1 5 I/O Address (he x) System Fu nction (shipping configuration) 0x00000C6F-0x00000C6F System board resources 0x00000CD4-0x00000CD5 System board re.
6–1 6 Maintenance a nd Service Guide Spe cificat ions T able 6-11 System Memory Map Memory Map Address (he x) System Function (shipping configuration) 0xD4100000-0xD41FFFFF PCI standard PCI-to-PCI b.
Spe cificat ions Maintenance and S ervi ce Guide 6–1 7 Memory Map Address (he x) System Function (shipping configuration) 0xF2C00000-0xF6BFFFFF T e xas Inst ruments PCIxx21/x515 Cardb u s Controller.
6–1 8 Maintenance a nd Service Guide Spe cificat ions.
Maintenance and S ervi ce Guide A–1 A Sc r e w Listing This appendix provides specif i cation and reference information for the scre ws used in the computer . The four Phillips PM3.0×3.0 scre ws used to secure the hard driv e bracke t to the hard dri ve are in cl uded in the Hard Dri ve Bracket Kit, spare part numb er 434106-001.
A–2 M aintenance and Service Guide Scre w List ing The remaining scre ws lis ted in this appendix are av ailable in the Screw Kits, spare part number 434676-001, an d the Display Scre w Kit, spare part number 432967-00 1. Capti ve Phillips P M2 .0×5 .
Screw Li st in g Maintenance and S ervi ce Guide A–3 Phillips P M2 .0×1 1 . 0 Scr ew L ocations Ta b l e A - 3 Phillips PM2.0×11.0 Scre w Color Qty . Length Thread Head Width Silver 2 11.0 mm 2.0 mm 5.0 mm Where used: 2 scre ws that secure the Mini Card m odule to the computer (doc umented in Section 5.
A–4 M aintenance and Service Guide Scre w List ing Phillips P M2 .5×8. 0 Scr ew Locations Ta b l e A - 4 Phillips PM2.5×8.0 Screw Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 1 One screw that secures the optical drive to the computer (documented i n Section 5.
Screw Li st in g Maintenance and S ervi ce Guide A–5 Phillips P M2 .5×8. 0 Scr ew Locations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Contin ued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 2 scre ws that secure the displa y assemb ly to the computer (documen ted in Section 5.
A–6 M aintenance and Service Guide Scre w List ing Phillips P M2 .5×8. 0 Scr ew Locations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Contin ued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 5 screws that secure the displa y bezel to the display enclosure (documented in Section 5.
Screw Li st in g Maintenance and S ervi ce Guide A–7 Phillips P M2 .5×8. 0 Scr ew Locations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Contin ued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 6 screws that secure the displa y pan el to the displa y enclo sure (documented in Section 5.
A–8 M aintenance and Service Guide Scre w List ing Phillips P M2 .5×8. 0 Scr ew Locations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Contin ued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 8 scre ws that secure the top cov er to the base enclosure (documented in Section 5.
Screw Li st in g Maintenance and S ervi ce Guide A–9 Phillips P M2 .5×8. 0 Scr ew Locations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Contin ued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 5 scre ws that secure the top cov er to the base enclosure (documented in Section 5.
A–1 0 Maintenance a nd Service Guide Scre w List ing Phillips P M2 .5×8. 0 Scr ew Locations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Contin ued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 1 F our screws that secure the top co ver support tr im to the base enclosure (documented in Sectio n 5.
Screw Li st in g Maintenance and S ervi ce Guide A–1 1 Phillips P M2 .5×8. 0 Scr ew Location Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Contin ued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the top co ver support tr im to the base enclosure (documented in Sectio n 5.
A–1 2 Maintena nce and Service Guide Scre w List ing Phillips P M2 .5×8. 0 Scr ew Locations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Contin ued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 3 screws that secure the system board to the base enclosure (documented in Section 5.
Screw Li st in g Maintenance and S ervi ce Guide A–1 3 Phillips P M2 . 0×3 . 0 Scr ew L ocatio ns Ta b l e A - 5 Phillips PM2.0×3.0 Screw Color Qty . Length Thread Head Width Silver 8 3.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the optical dr iv e br ack et to the optical dr iv e (documented in Section 5.
A–1 4 Maintena nce and Service Guide Scre w List ing Phillips P M2 . 0×3 . 0 Scr ew L ocatio ns Ta b l e A - 5 Phillips PM2.0×3.0 Screw (Contin ued) Color Qty . Length Thread Head Width Silver 8 3.0 mm 2.0 mm 4.0 mm Where used: 4 screws that secure the displa y hin ges to the displa y pane l (documented in Section 5.
Screw Li st in g Maintenance and S ervi ce Guide A–1 5 Phillips P M2 . 0×3 . 0 Scr ew L ocatio ns Ta b l e A - 5 Phillips PM2.0×3.0 Screw (Contin ued) Color Qty . Length Thread Head Width Silver 8 3.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the Bluetooth modu le to the base enclosure (documented in Section 5.
A–1 6 Maintena nce and Service Guide Scre w List ing Phillips P M2 .0×5 .0 Scr ew L ocation s Ta b l e A - 6 Phillips PM2.0×5.0 Screw Color Qty . Length Thread Head Width Silver 6 5.0 mm 2.0 mm 5.0 mm Where used: 6 scre ws that secure the s witch co v er to the computer (documente d in Section 5.
Screw Li st in g Maintenance and S ervi ce Guide A–1 7 Phillips P M2 .5×7 .0 Scr ew Location Ta b l e A - 7 Phillips PM2.5×7.0 Screw Color Qty . Length Thread Head Width Black 1 7.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the keyboar d to the computer (documented in Section 5.
A–1 8 Maintena nce and Service Guide Scre w List ing Silver Phillips PM2 . 5 ×5 .0 Scr ew Locations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw Color Qty . Length Thread Head Width Silver 28 5.0 mm 2.5 mm 5.0 mm Where used: 3 scre ws that secure the ke yboard to the computer (documented in Section 5.
Screw Li st in g Maintenance and S ervi ce Guide A–1 9 Silver Phillips PM2 . 5 ×5 .0 Scr ew Locations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty .
A–20 Maintenance a nd Service Guide Scre w List ing Silver Phillips PM2 . 5 ×5 .0 Scr ew Locations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 28 5.0 mm 2.5 mm 5.0 mm Where used: 4 scre ws that secure the top cov er to the base enclosure (documented in Section 5.
Screw Li st in g Maintenance and S ervi ce Guide A–2 1 Silver Phillips PM2 . 5 ×5 .0 Scr ew Location Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 28 5.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the top co ver to the base enclosure (documented in Section 5.
A–2 2 Maintenance a nd Service Guide Scre w List ing Silver Phillips PM2 . 5 ×5 .0 Scr ew Locations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 28 5.0 mm 2.5 mm 5.0 mm Where used: 1 T wo screws that secure the wireless switch board to the base enclosure (documented in Sectio n 5.
Screw Li st in g Maintenance and S ervi ce Guide A–2 3 Silver Phillips PM2 . 5 ×5 .0 Scr ew Locations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 28 5.0 mm 2.5 mm 5.0 mm Where used: 4 screws that secure the ExpressCard assembly to the base enclosure (documented in Sectio n 5.
A–2 4 Maintenance an d Servi ce Guide Scre w List ing Silver Phillips PM2 . 5 ×5 .0 Scr ew Locations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty .
Screw Li st in g Maintenance and S ervi ce Guide A–2 5 Silver Phillips PM2 . 5 ×5 .0 Scr ew Locations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 28 5.0 mm 2.5 mm 5.0 mm Where used: 3 screws that secure the system board to the base enclosure (documented in Section 5.
A–2 6 Maintenance an d Servi ce Guide Scre w List ing Silver Phillips PM2 . 5 ×5 .0 Scr ew Locations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 28 5.0 mm 2.5 mm 5.0 mm Where used: 3 screws that s ecure the heat sink to the system bo ard (documented in Section 5.
Screw Li st in g Maintenance and S ervi ce Guide A–2 7 Black Phillip s P M2 .5×5 .0 S cr ew L ocations Ta b l e A - 9 Black Phillips PM2.5×5.0 Scre w Color Qty . Length Thread Head Width Black 3 5.0 mm 2.5 mm 5.0 mm Where used: T wo screws that secure the speake r as sembly to the bas e enclosure (documented in Sectio n 5.
A–2 8 Maintenance a nd Service Guide Scre w List ing Black Phillip s P M2 .5×5 .0 S cr ew L ocation Ta b l e A - 9 Blac k Phillips PM2.5×5.0 Screw (Conti nued) Color Qty . Length Thread Head Width Black 3 5.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the pow er connec tor assembly to the base enclosure (documented in Sectio n 5.
Screw Li st in g Maintenance and S ervi ce Guide A–2 9 Phillips P M2 . 0×4. 0 Sc r e w Locati ons T able A-10 Phillips PM2.0×4.0 Screw Color Qty . Length Thread Head Width Silver 4 4.0 mm 2.0 mm 5.0 mm Where used: 4 screws that secure the wireless antenna transceiv ers to the display enclosure (documented in Sectio n 5.
A–30 Maintenance a nd Service Guide Scre w List ing Phillips P M2 .5×6. 0 Scr ew L oca tio ns T able A-11 Phillips PM2.5×6.0 Screw Color Qty . Length Thread Head Width Black 4 6.0 mm 2.5 mm 5.0 mm Where used: 4 screws that secure the f an/heat sin k assemb ly to the system board (documented in Sectio n 5.
Maintenance and S ervi ce Guide B–1 B B ac k up an d R eco v er y Ba ck u p and Reco v er y in Windo ws XP Rec o verin g S yst em Info rm at io n T ools provided by the operating system and PC Reco .
B–2 Mainten ance and Service Gui de Back up and Reco very Ba ckin g Up Y our Informa tion When to B ack Up ■ On a regularly scheduled basis ✎ Set reminders to back up yo ur information periodically .
Back up and Re cov er y Maintenance and S ervi ce Guide B–3 Using S y stem Restore P oints When you back up your system, you are creating a system restore point. A system restore point allo ws you to sav e and name a snapshot of your hard dri ve at a specif ic point in time.
B–4 Mainten ance and Service Gui de Back up and Reco very 2. Click Restore my computer to an earlier time , and then click Next . 3. Follo w the on-screen instructions. Creating Reco v ery Disc s PC Recove ry Disc Creator creates a set of recov ery CDs or D VDs for the computer .
Back up and Re cov er y Maintenance and S ervi ce Guide B–5 ✎ If you are operating the computer on battery po wer , you will be prompted to connect to A C po wer before you can go to the next step. 3. Select the type of disc you w ant to use and click Next .
B–6 Mainten ance and Service Gui de Back up and Reco very Re installing Pr einstalled Pr ograms and Dr iv ers 1. Remov e the program or dri ver: ✎ In some cases, drivers are no t listed in the Add or Remov e Programs list. If the dri ver is no t listed, it does not need to be remov ed.
Back up and Re cov er y Maintenance and S ervi ce Guide B–7 ✎ Microsoft W indows XP has its o wn built-in repair features, such as System Restore and driv er roll-back capabilities. If you hav e not already tried these features, try them before using PC R ecove ry .
B–8 Mainten ance and Service Gui de Back up and Reco very 3. Click OK . 4. Follo w the on-screen instructions to complete the system recov ery . If you want to perform a destructive recovery: ✎ A destructi ve reco very formats the hard dri ve and restores the computer to its factory state.
Back up and Re cov er y Maintenance and S ervi ce Guide B–9 4. Click OK . 5. At the System Recov ery screen, click Advanced Options . 6. Select Delete Recov ery Partit ion (not r ecommended) and follo w the on-screen instructions.
B–1 0 Maintenance and Service Gui de Back up and Reco very ■ Create system restore points (operating system feature). System restore points allo w you to re verse undesirable changes to your comp uter b y restoring the computer to an earlier state.
Back up and Re cov er y Maintenance and S ervi ce Guide B–1 1 T o copy the screen a nd past e it into a w ord-processing document: a. Display the screen. b . Copy the screen: T o copy only the acti ve windo w , press alt+fn+prt sc . T o copy the e ntire screen, p ress fn+prt sc .
B–1 2 Maintenance and Service Gui de Back up and Reco very 3. Click the System Protection tab . 4. Under Automatic restore points , select the disk for which you wan t to create a restore point. 5. Click Cre ate . The System Protection windo w opens.
Back up and Re cov er y Maintenance and S ervi ce Guide B–1 3 ✎ Formatted D VD±R W discs and D VD±R W doubl e-layer discs are not compatible with the Reco very Manager softwa re. ■ The computer must be connected to A C po wer during this process.
B–1 4 Maintenance and Service Gui de Back up and Reco very ✎ Before reinstalling the program, be sure it is fully uninst alled. Recov ery Manager replaces corrupt ed system f iles and reinstalls deleted system files within the program.
Back up and Re cov er y Maintenance and S ervi ce Guide B–1 5 2. When the installation wizard opens, follo w the installation instructions on the screen. 3. Restart the computer if prompted. Pe r fo rm i n g a R e c o ve r y Recov ery Manager software allo ws you to repair or restore the system if you experience system failure or instability .
B–1 6 Maintenance and Service Gui de Back up and Reco very ❏ Select Start > All Programs > Recov e ry Manager > Recov ery Manager . ❏ Restart the computer and press f11 while the “Press <F11> for recov e ry” message is disp laye d on the screen.
Back up and Re cov er y Maintenance and S ervi ce Guide B–1 7 Upd ating Reins talled Soft war e After you perform a system recov e ry , connect to the Internet to update all reinstalled software. T o access update links for th e operating system and other software pro vided on your computer: » Select Start > Help and Support .
B–1 8 Maintenance and Service Gui de Back up and Reco very.
Maintenance and S ervi ce Guide C–1 C Dis pl a y Co mpon ent Rec y c ling Å WA R N I N G : T he backli ght contains mer cury . Cauti on should be ex erc ised when r emov ing and h andling the bac klight to av oid damaging this component and causing e xposure to the mer c ury .
C–2 Maintenance and Ser vi ce Guide Display Co mponent Recy cling This appendix provides disassemb ly instructions for t he display assembly . The display assembly must be disassembled to gain access to the backlight 1 and the LCD pan el 2 . ✎ Disassembly procedures dif fer from one display assembly t o another .
Dis play Compo nent Recyclin g Maintenance and S ervi ce Guide C–3 Perform the follo wing steps to di sassemble the display ass embly: 1. Re mo ve a ll s cr ew c over s 1 and screws 2 that secure the display bezel to th e display assembly .
C–4 Maintenance and Ser vi ce Guide Display Co mponent Recy cling 2. Lift up and out on the left and right insid e edges 1 and the top and bottom inside edg es 2 of the display bezel until the bezel disengages from the display assembly . 3. Remov e the display bezel 3 .
Dis play Compo nent Recyclin g Maintenance and S ervi ce Guide C–5 4. Disconnect all LCD panel cables 1 from the display in verter board and remov e the in verter board 2 .
C–6 Maintenance and Ser vi ce Guide Display Co mponent Recy cling 5. Remov e all screws 1 that secure the LCD panel to the display enclosure. 6. Remov e the LCD panel 2 from the display enclosure.
Dis play Compo nent Recyclin g Maintenance and S ervi ce Guide C–7 7. T urn the LCD pa nel upside down. 8. Remov e all screws that secu re the LCD panel frame to the LCD panel.
C–8 Maintenance and Ser vi ce Guide Display Co mponent Recy cling 9. Use a sharp-edged tool to cut the tape 1 that secures the side of the LCD panel to the LCD panel fra me.
Dis play Compo nent Recyclin g Maintenance and S ervi ce Guide C–9 11. Remov e the screws 1 that secure the b acklight co ver to the LCD panel. 12. Lift the top edge of the backlight co ver 2 and swing it forward.
C–1 0 M aintenance and Service Guide Display Co mponent Recy cling 14. T urn the LCD panel right-side up. 15. Remov e the backlight cables 1 from the clip 2 in the LCD panel.
Dis play Compo nent Recyclin g Maintenance and S ervi ce Guide C–1 1 16. T u rn the LCD panel upside down. 17. Remov e the backlight frame from the LCD panel.
C–1 2 Mainten ance and Service Guide Display Co mponent Recy cling Å WA R N I N G : T he backli ght contains mer cury . Cauti on should be ex erc ised when r emov ing and h andling the bac klight to av oid damaging this component and causing e xposure to the mer c ury .
Dis play Compo nent Recyclin g Maintenance and S ervi ce Guide C–1 3 19. Disconnect the display cable 1 from the LCD panel. 20. Remov e the screws 2 that secure the LC D panel to the LCD rear panel. 21. Release the LCD panel 3 from the LCD rear panel.
C–1 4 Mainten ance and Service Guide Display Co mponent Recy cling 23. Remov e the LCD panel. Rem ovi ng th e L C D P a ne l 24. Recycle the backlight and LCD panel.
Maintenance and S ervi ce Guide D–1 D Conn ec tor P in As signm ents Ta b l e E - 1 Universal Se rial Bus Pin Signal Pin Signal 1 +5 VDC 3 Data + 2 Data – 4 Ground.
D–2 Maintenance a nd Servi ce Guide Connec tor P in Assignments Ta b l e E - 2 RJ-45 (Netw ork) Pin Signal Pin Signal 1 T ransmit + 5 Unused 2 T ransmit – 6 Receive – 3 Recei ve + 7 Unused 4 Unu.
Connect or P in Assignments Maintenance and S ervi ce Guide D–3 Ta b l e E - 3 S-Video-Out Pin Signal Pin Signal 1 TV -Ground 5 TV -CD 2 TV -CVBS 6 TV -Ground 3 TV -Ground 7 TV -YD 4 TV -Ground.
D–4 Maintenance a nd Servi ce Guide Connec tor P in Assignments Ta b l e E - 4 External Monitor Pin Signal Pin Signal 1 Red analog 9 +5 VDC 2 Green analog 10 Ground 3 Blue analog 11 Monitor de tect .
Connect or P in Assignments Maintenance and S ervi ce Guide D–5 Ta b l e E - 5 RJ-11 (Modem) Pin Signal Pin Signal 1 Unused 4 Unused 2 Tip 5 Unused 3 Ring 6 Unused.
D–6 Maintenance a nd Servi ce Guide Connec tor P in Assignments Ta b l e E - 6 A udio-In (Micr ophone) Pin Signal Pin Signal 1 Audio signal in 3 Gro und 2 Audio signal in Ta b l e E - 7 A udio-Out (.
Maintenance and S ervi ce Guide E–1 E P o w er C ord Set R equirem ents 3-Con duc tor P ow er Cord Set The wide range input featu re of th e computer permits it to operate from any line v oltage from 100 to 120 or 220 to 240 volts A C.
E–2 Mainten ance and Service Gui de P o wer C ord Set R equirements Gen eral Requirements The requirements listed belo w are applicable to a ll countries and regions. ■ The length of the po wer cord set must be at least 1.5 m (5.0 ft) and a maximum of 2.
P ow er Cord Set R e quir ements Maintenance and S ervi ce Guide E–3 C oun tr y/ Reg ion -S pec i fi c Req ui rem en ts 3-Conductor P ower Cor d Set Requirements Country/Region Accredited Ag ency Ap.
E–4 Mainten ance and Service Gui de P o wer C ord Set R equirements Ko r e a EK 4 The Nether lands K EMA 1 Norwa y NEMK O 1 P eople’s Repub lic of China CCC 5 Sweden SEMK O 1 Switzerland SEV 1 Ta i w a n B S M I 4 United Kingdom BSI 1 United States UL 2 ✎ NOTES: 1.
Maintenance and S ervi ce Guide Index–1 Ind e x 1394 port 1–9 A AC adapter, spare part numbers 3–28 , 3–33 analog TV tuner, spare part numbers 3–28 arrow keys 1–13 audio board removal 5–.
Index–2 Maintenance and Ser v ice Guide Index camera cable disconnection 5–37 removal 5–47 spare part number 3–21 , 3–35 , 5–47 camera module removal 5–41 spare part number 3–21 , 3–.
Inde x Maintenance and S ervi ce Guide Index–3 Display Cable Kit, spare part number 3–21 , 3–35 , 5–47 display enclosure, spare part numbers 3–21 , 3–34 display hinge removal 5–44 spare .
Index–4 Maintenance and Ser v ice Guide Index removal 5–80 spare part numbers 3–9 , 3–37 , 5–80 features 1–2 feet, locations 5–11 flowcharts, trou bleshooting no audio 2–31 , 2– 32 n.
Inde x Maintenance and S ervi ce Guide Index–5 spare part number 3–21 , 3–35 , 5–44 I I/O address specifications 6–13 infrared receiver, spare part numbers 3–28 , 3–38 interrupt specific.
Index–6 Maintenance and Ser v ice Guide Index next/fast forward bu tton 1–18 nonfunctioning device, troubleshooting 2–24 , 2–33 num lock key 1–13 num lock light 1–15 O optical drive locati.
Inde x Maintenance and S ervi ce Guide Index–7 Windows XP B–7 remote control, spare part number 3–28 , 3–31 remote control, spare part numbers 3–28 , 3–37 , 3–38 , 3–39 removal prelimi.
Index–8 Maintenance and Ser v ice Guide Index system DMA 6–10 T thermal pad, locations 5–82 , 5–84 thermal paste, locations 5–82 , 5–84 tools required 4–1 top components 1–14 , 1–16 .
Inde x Maintenance and S ervi ce Guide Index–9 W Windows applications k ey 1–13 Windows logo ke y 1–13 wireless antenna removal 5–45 spare part number 3–21 , 3–35 , 5–45 wireless laser m.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) dv9200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) dv9200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) dv9200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) dv9200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) dv9200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) dv9200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) dv9200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) dv9200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) dv9200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
