Benutzeranleitung / Produktwartung 4000 des Produzenten HP (Hewlett-Packard)
Zur Seite of 30
Copyright© 1997, 1998 He wlett-Packard Co. Printed in Singapore Manual Part No. C4118-91135 English HP LaserJet 4000 and 4000 N Printers Getting Started Guide *C4118-91135* *C4118-91135* C41 18-91 13.
HP LaserJet 4000 and 4000 N Pr inters Getting Star ted Guide Pr inter Setup.
Hewlett-P ac kard Company 11311 Chinden Boule v ard Boise, Idaho 83714 © Cop yright Hewlett-P ackard Company 1997, 1998 All Rights Reser ved. Reproduction, adaptation, or translation without prior written permission is prohibited, e xcept as allowed under the copyright laws .
EN Getting Star ted Guide 1 Intr oduction Congra tulations on y our purchase of the HP LaserJet pr inter! The printer was packaged with tw o getting star ted guides. Be sure to use the guide that matches your printer model. Configurations This printer is av ailabl e in f our configurations, as described below .
2 Getting Star ted Guide EN Installation Chec klist This getting star ted guide will help you set up and install the new printer . For proper installation, please complete each section in order . W ARNING! The printer is heavy . We recommend tw o people mov e it.
EN Getting Star ted Guide 3 Step 1. Chec k P ac kage Contents Figure 1 Package Contents Note A printer cable is not included in the package contents . See the printer user’ s guide for ordering information.
4 Getting Star ted Guide EN Step 2. Remo ve Internal P ac kaging Note Sav e all packing material. Y ou ma y need to repack the printer at a later date. 1 Remov e the shipping bag and tape from the tra ys. 2 Remov e the tape from the back of the printer .
EN Getting Star ted Guide 5 6 Slide T ra y 2 out of the pr inter . 7 Remov e all packaging material and tape from the tra y . 8 Slide T ra y 2 back into the printer .
6 Getting Star ted Guide EN Step 3. Prepare Printer Location Figure 2 Printer Dimensions 15.4 inches (39.0 cm) 16.77 inches (42.6 cm) printer only, rear output bin closed HP LaserJet 4000/4000 N 18.5 inches (46.99 cm) with cover open 13.3 inches (34.3 cm) with cover closed HP LaserJet 4000 T/4000 TN 20.
EN Getting Star ted Guide 7 Location requirements for the printer • A sturdy , lev el surface f or placement • Space allow ance around the pr inter • A well v entilated room • No e xposure to .
8 Getting Star ted Guide EN Step 4. Locate Printer P ar ts The f ollowing illustr ations giv e the location and names of the impor tant pr inter par ts. Figure 3 Printer Parts (front view) Top cover Control panel Tray 1 (100-sheet, with extension) Tray 2 (500-sheet, closed) Top output bin Additional memory can be installed here.
EN Getting Star ted Guide 9 Figure 4 Printer Parts (rear view) Rear output bin (straight-through paper path) Power connector Serial and model numbers (inside cover) Serial and accessory interface connectors Parallel interface connector Memory, network, or I/O (More than one can be installed.
10 Getting Star ted Guide EN Step 5. Install Accessories Install any accessories that you ha ve purchased with the printer . Use the installation instructions that are packaged with the accessories. Figure 5 Optional Accessories Note See the printer user’ s guide for inf or mation on order ing accessories.
EN Getting Star ted Guide 11 Step 6. Install T oner Cartridg e 1 Remov e the toner car tridge from its packaging (sa ve packaging f or possible cartr idge storage). Open the printer by lifting the top cov er . 2 Rotate the car tr idge and gently shake it from side to side to distribute the toner e venly inside the car tr idge.
12 Getting Star ted Guide EN Step 7. Load T ra ys Tr a y 2 T ra y 2 is a 500-sheet tra y . It adjusts for letter , A4, and legal sizes . 1 Pull the tra y completely out of the printer . 2 If the tra y is not already set to the desired paper size , snap the left and right guides into place to match the width of the paper .
EN Getting Star ted Guide 13 Tr a y 1 T ra y 1 is a multi-pur pose tra y that holds up to 100 sheets of paper , 10 env elopes, or 20 inde x cards. T ra y 1 provides a conv enient wa y to print env elopes, transparencies, custom-sized paper , or other type of media without having to unload the other tra ys.
14 Getting Star ted Guide EN Step 8. Attach P ower Cor d 1 Locate the power s witch on the right side of the printer . Make sure the printer is switched off . 2 Connect the pow er cord to the printer and a grounded power strip or an A C outlet. Note Only use the pow er cord that came with the printer .
EN Getting Star ted Guide 15 Step 9. T est the Printer Bef ore connecting the printer to a network or computer , pr int a configuration page to mak e sure the printer is operating correctly . 1 Make sure the printer is on and the READY message is displa y ed.
16 Getting Star ted Guide EN Step 10. Connect Printer Cables The HP LaserJet 4000 printer includes two interf ace por ts: an IEEE-1284 parallel and a RS-232C serial, and an accessor y connector .
EN Getting Star ted Guide 17 Connecting P arallel Cable Use the parallel por t when directly connecting the printer to a personal computer . Caution Make sure the printe r is tur ned off bef ore connecting the parallel cab le.
18 Getting Star ted Guide EN Connecting Serial Cable If you are connecting the printer with the serial por t, f ollow these instructions. Caution Make sure the printer is turned off bef ore connecting the serial cable . Caution Do not connect a serial cable to the accessor y por t.
EN Getting Star ted Guide 19 Connecting to Apple LocalT alk Netw ork Use the LocalT alk por t to connect to a Apple LocalT alk network. Caution Make sure the printe r is tur ned off bef ore connecting to the LocalT alk por t. 1 Carefully check the orientation of the pins on the LocalT alk cab le with the LocalT alk por t.
20 Getting Star ted Guide EN Connecting to Ethernet 10Base-T Network Use the RJ-45 por t to connect the pr inter to an Ether net 10-Base-T network. Caution Make sure the printer is turned off before connecting to the RJ-45 por t. • Connect a twisted-pair network cable to the RJ-45 port on the HP JetDirect 600N print server card.
EN Getting Star ted Guide 21 Connecting to Ethernet 10Base2 Network Use the BNC por t to connect the pr inter to an Ether net 10Base2 network. Caution Make sure the printer is turned off before connecting to the BNC por t. • Attach one section of your ThinLAN cable to the BNC “T ” connector.
22 Getting Star ted Guide EN Accessory Connector The accessor y connector is used f or adding optional paper handling (e xter nal input, output, and paper finishing) devices prov ided by HP- authorized hardware de velopers . For specific installation instructions, see the documentation provided with these products .
EN Getting Star ted Guide 23 Step 11. Install Printing Software The printer comes with pr inting software on a compact disc. The printer dr ivers on this compact disc must be installed to tak e full advantage of the printer f eatures.
24 Getting Star ted Guide EN Installing Windows Printing Software For Windows 95/NT 4.0 1 Close all running applications. 2 Inser t the compact disc into the CD-ROM drive . (Depending on the computer configuration, the installation progr am may automatically star t.
EN Getting Star ted Guide 25 Installing Macintosh Printing Software 1 Quit all open applications. 2 Inser t the compact disc into the CD-ROM drive . 3 Double-clic k the Installer icon and follo w the instructions on the screen. 4 Open the Chooser from the Apple menu.
26 Getting Star ted Guide EN Step 12. V erify Printer Setup The easiest wa y to verify that the installation has been completed successfully is to print a document from a software application. 1 Load a software application of y our choice and open or create a simple document.
Copyright© 1997, 1998 He wlett-Packard Co. Printed in Singapore Manual Part No. C4118-91135 English HP LaserJet 4000 and 4000 N Printers Getting Started Guide *C4118-91135* *C4118-91135* C41 18-91 13.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) 4000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) 4000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) 4000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) 4000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) 4000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) 4000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) 4000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) 4000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) 4000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
