Benutzeranleitung / Produktwartung 3C900 des Produzenten HP (Hewlett-Packard)
Zur Seite of 40
Etherlink XL PCI Network Interface Card 3C900 Installation Guid e.
Notic e The information contained in this document is subject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.
1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE and set lines 1-5 as listed below ; • C:NWCLIEN T • YE S • YES C:WINDOW S • NO • 3COM Etherlink XL/Fast Etherlink XL Family . 8 Highlight option 6 to continue with installation.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • File Name: OEMSETUP.INF Size: 41K B Date: 3/14/97 • Windows 95 SR2 media.
1 Connecting to a Netware 3.12 Serve r Windows 95 SR 2 10 Set the path to “A:” and click on “OK.” (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C900Disk1” ) 11 “3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed.
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.
2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE and set lines 1-5 as listed below ; • C:NWCLIEN T • YE S • YES C:WINDOW S • NO • 3COM Etherlink XL/Fast Etherlink XL Family . 8 Highlight option 6 to continue with installation.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • File Name: OEMSETUP.INF Size: 41K B Date: 3/14/97 • Windows 95 SR2 media.
2 Connecting to a Netware 4.11 Serve r Windows 95 SR 2 10 Set the path to “A:” and click on “OK.” (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C900Disk1” ) 11 “3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Version 3.1 1 Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Version 3.1 1 9 Click on the “Install Microsoft Windows Network:” Option , and click “OK. ” 10 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 . • 3COM Etherlink 3C900 Ethernet card and drivers disk Ver. 2.1. Driver Name: El90X.DOS Size: 45KB Date: 3/21/9 7 • Microsoft Windows NT Server 3.
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2 11 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:” then click “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:LANDRV3C900DISK1”) .
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2.
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra with Microsoft Windows NT Workstation 3.51 installed . • 3COM Etherlink 3C900 ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1 10 Double click on the “Network” icon in the “Control Panel” program group . 11 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer .
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra with Windows NT Workstation 4.0 Service Pack 3 . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • Driver Name: 3C90X.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator ) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version 3.11 4 Connecting to a Windows NT Server 4. 0 Windows for Workgroups Version 3.1 1 Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver.
4 Connecting to a Windows NT Server 4. 0 Windows for Workgroups Version 3.1 1 9 Click on the “Install Microsoft Windows Network:” Option , and click “OK. ” 10 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 . • 3COM Etherlink 3C900 Ethernet card and drivers disk Ver. 2.1. Driver Name: El90X.DOS Size: 45KB Date: 3/21/9 7 • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2 11 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:” then click “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:LANDRV3C900DISK1”) .
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2.
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra with Microsoft Windows NT Workstation 3.51 installed . • 3COM Etherlink 3C900 ethernet card and drivers disk ver.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1 10 Double click on the “Network” icon in the “Control Panel” program group . 11 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer .
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 25 Set your IP address information in the “TCP/IP Configuration” dialog box, and click “OK”.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra with Windows NT Workstation 4.0 Service Pack 3 . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • Driver Name: 3C90X.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator ) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0.
.
Version Number 3C900 Rev. 1.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) 3C900 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) 3C900 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) 3C900 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) 3C900 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) 3C900 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) 3C900 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) 3C900 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) 3C900. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) 3C900 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
