Benutzeranleitung / Produktwartung 3C339 des Produzenten HP (Hewlett-Packard)
Zur Seite of 30
TokenLink Velocity PCI Network Interface Card 3C33 9 Installation Guid e.
Notic e The information contained in this document is subject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM 3C339TokenRing card and drivers disk DOS ODI - File Name: tlvmp339.
1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE . 8 Specify the settings as listed below : ❒ C:NWCLIEN T ❒ Ye s ❒ Ye s ❒ C:WINDOW S ❒ N o ❒ 3Com Fast E.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8 with Windows 95 SR2 installed . • 3COM 3C 339 Token Ringcard and drivers disk • Windows 95 SR2 media . • Novell Netrware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols .
1 Connecting to a Netware 3.12 Serve r Windows 95 SR 2 (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:MASTERSLANDRV3C509B” ) 11 Highlight the adapter labeled “3Com Token Ring in PCI Mode” and press “OK. ” 12 At the “Network” dialogue box, click on the “Identification” folder .
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM 3C339TokenRing card and drivers disk DOS ODI - File Name : tlvmp339.
2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE . 8 Specify the settings as listed below : ❒ C:NWCLIEN T ❒ Ye s ❒ Ye s ❒ C:WINDOW S ❒ N o ❒ 3Com Fast E.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8 with Windows 95 SR2 installed . • 3COM 3C 339 Token Ringcard and drivers disk • Windows 95 SR2 media . • Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX, an d NWLink NetBIOS transfer protocols .
2 Connecting to a Netware 4.11 Serve r Windows 95 SR 2 10 Insert the 3C339 drivers diskette and set path to “A:” and hit Enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:MASTERSLANDRV3C509B” ) 11 Highlight the adapter labeled “3Com Token Ring in PCI Mode” 12 and press “OK.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Ver. 3.1 1 Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM Token Ring 3C339 card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Ver. 3.1 1 ❒ C:WINDOW S ❒ N o 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:NETWARECLIENT.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8with Windows 95 SR2 . • 3COM TokenRing 3C 339 card and drivers disk • Windows 95 media . • Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols .
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box .
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 3.51 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 3.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 4.0 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 4.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 4. Connecting to a Windows NT Server 4. 0 Windows for Workgroups Ver. 3.1 1 Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM Token Ring 3C339 card and drivers disk ver.
4. Connecting to a Windows NT Server 4. 0 Windows for Workgroups Ver. 3.1 1 ❒ C:WINDOW S ❒ N o 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:NETWARECLIENT.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8with Windows 95 SR2 . • 3COM TokenRing 3C 339 card and drivers disk • Windows 95 media . • Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols .
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box .
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 3.51 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 3.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 4.0 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 4.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0.
.
Version Number 3COM 339 Rev. 1.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) 3C339 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) 3C339 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) 3C339 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) 3C339 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) 3C339 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) 3C339 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) 3C339 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) 3C339. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) 3C339 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
