Benutzeranleitung / Produktwartung 1018 des Produzenten HP (Hewlett-Packard)
Zur Seite of 116
HP L as erJet 1018 U ser Gui de.
.
HP LaserJet 1018 printer User Guide.
Copyright information © 2006 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. Part number: CB419-90973 Edition 2 , 04/200 9 The information contained herein is subject to change without notice.
Table of contents 1 Printer basics Quick access to more information .................... ................. .......................... ................. .............2 Web links for drivers, software, and support ............... . .................. ..
Priority feed slot ............................................................................................................ .... 26 150-sheet main input tray .........................................................................................
Page skew ...................... . .......... ............... .... ................................ .......... ....... ................ ...69 Curl or wave ........................ ............. ......... ....... ..................... .................
Appendix E Service and support Availability of support and service .................... ....................... .................... ......... ............. ....10 0 HP Care Pack™ Services and Service Agreements .............. ......... ........... .
1 Printer basics This chapter provides information on the following topics: ● Quick access to more information ● Printer configuration ● Walkaround ● Printer control panel ● Media paths ● .
Quick access to more information The following sections provide resources for additional information about the HP LaserJet 1018 printer. Web links for drivers, software, and support If you need to contact HP for service or support, use one of the following links.
Printer configuration Below is the standard configuration for the HP LaserJet 1018 printer. HP LaserJet 1018 printer ● 12 pages per minute (ppm) for A4 media and 12 ppm for letter media ● First pa.
Walkaround The following illustrations identify the components of the HP LaserJet 1018 printer. 1 Attention light 2 Ready light 3 Print cartridge door 4 Output media support 5 Priority feed slot 6 150.
Printer control panel The printer control panel is composed of two lights. These lights produce patterns that identify your printer's status. 1 Attention light : Indicates that the printer media input trays are empty, the print cartridge door is open, the print cartridge is missing, or other errors.
Media paths The following sections describe the input trays and output bin. Priority feed slot You should use the priority feed slot when feeding one sheet of paper, envelope, postcard, label, or transparency. You can also use the priority feed slot to print the first page on different media than the rest of the document.
Output bin The output bin is located on the top of the printer. Printed media is collected here in the correct sequence. The output media support provides improved stacking for large print jobs.
Printer connections The HP LaserJet 1018 printer supports USB 2.0 High Speed connections. Connecting the USB cable 1. Plug the USB cable into the printer. 2. Plug the other end of the USB cable into the computer when prompted to do so during the software installation.
Printer software The following sections describe the supported operating systems and the software that is provided with the HP LaserJet 1018 printer. NOTE Not all software is available in all languages.
Printer properties (driver) Printer properties control the printer. You can change the default settings, such as media size and type, printing multiple pages on a single sheet of media (N-up printing), resolution, and watermarks.
To access the printer properties online help 1. From the software application, click File , and then click Print . 2. Click Properties , and then click Help . Print setting priorities There are two ways to change print settings for this printer: in the software application or in the printer driver.
Printer information page The Printer Test page is a printer information page that resides within the memory of the printer. During installation you can choose to print the Printer Test page. If the page prints, you correctly installed the printer. Printer Test page The Printer Test page contains information about printer driver and port settings.
Printer media considerations HP LaserJet printers produce excellent print quality. The printer accepts a variety of media, such as cut-sheet paper (including recycled paper), envelopes, labels, transparencies, vellum, and custom-size paper.
14 Chapter 1 Printer basics ENWW.
2 Printing tasks This chapter provides information on the following topics: ● Manual feed ● Canceling a print job ● Understanding print quality settings ● Optimizing print quality for media ty.
Manual feed You can use manual feed when printing mixed media, for example, an envelope, then a letter, then an envelope, and so on. Feed an envelope into the priority feed slot and load letterhead into the main input tray. To print using manual feed 1.
Canceling a print job You can cancel a print job from a software application or a print queue. To stop the printer immediately, remove the remaining paper from the printer.
Understanding print quality settings Print quality settings affect how light or dark the print is on the page and the style in which the graphics are printed. You can also use the print quality settings to optimize the print quality for a specific media type.
Optimizing print quality for media types Media type settings control the temperature of your printer's fuser. You can change the settings for the media that you are using to optimize the print quality.
Guidelines for using media The following sections provide guidelines and instructions for printing on transparencies, envelopes, and other special media. Guidelines and specifications are included to help you select media that optimizes print quality and avoid media that might cause jams or damage the printer.
Labels HP recommends that you print labels from the priority feed slot. CAUTION Do not feed a sheet of labels through the printer more than once. The adhesive degrades and might damage the printer.
Envelopes with double-side seams An envelope with double-side-seam construction has vertical seams at both ends of the envelope rather than diagonal seams. This style might be more likely to wrinkle. Make sure that the seam extends all the way to the corner of the envelope as shown in the following illustration.
Cardstock construction ● Smoothness : The 135-157 g/m 2 (36-42 lb) cardstock should have a smoothness rating of 100-180 Sheffield; 60-135 g/m 2 (16-36 lb) cardstock should have a smoothness rating of 100-250 Sheffield. ● Construction : Cardstock should lie flat with less than 5 mm (0.
Choosing paper and other media HP LaserJet printers produce excellent print quality documents. You can print on a variety of media, such as paper (including up to 100% recycled fiber content paper), envelopes, labels, transparencies, and custom-size media.
● Do not use photo paper intended for Inkjet printers. ● Do not use paper that is embossed or coated and is not designed for the temperatures of the printer's image fuser. Select media that can tolerate temperatures of 200°C (392°F) for 0.1 second.
Loading media into the input trays The following sections describe how to load media into the different input trays. CAUTION If you try to print on media that is wrinkled, folded, or damaged in any way, a jam might occur. See Printer media considerations for more information.
Printing an envelope Only use envelopes that are recommended for laser printers. See Printer media considerations for more information. NOTE Use the priority feed slot for printing one envelope. Use the main input tray for printing multiple envelopes.
4. Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer properties (driver) for instructions. 5. On the Paper/Quality tab, select Envelope as the media type. NOTE Not all printer features are available in all drivers or operating systems.
Printing multiple envelopes Only use envelopes that are recommended for laser printers. See Printer media considerations for more information. NOTE Use the priority feed slot for printing one envelope. Use the main input tray for printing multiple envelopes.
4. Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer properties (driver) for instructions. NOTE Not all printer features are available from all drivers or operating systems. See the printer properties (driver) online Help for information about availability of features for that driver.
Printing on transparencies or labels Use only transparencies and labels that are recommended for use in laser printers, such as HP transparency film and HP LaserJet labels. See Printer media considerations for more information. CAUTION Be sure to set the correct media type in the printer settings as instructed below.
Printing on letterhead and preprinted forms The HP LaserJet 1018 printer can print on letterhead and preprinted forms that can withstand temperatures of 200°C (392°F). 1. Load the paper with the top forward and the side to be printed facing up. Adjust the media guides to fit the width of the paper.
Printing on custom-size media and cardstock The HP LaserJet 1018 printer can print on custom-size media or cardstock between 76 x 127 mm (3 x 5 inches) and 216 x 356 mm (8.5 x 14 inches). Use the main input tray for multiple sheets. See Main input tray for the supported media sizes.
Printing on both sides of the paper (manual two-sided printing) To print on both sides of the paper (manual two-sided printing), you must run the paper through the printer twice. NOTE Manual two-sided printing can cause the printer to become dirty, reducing print quality.
5. Place the stack back in the input tray. Side one should be facing down with the bottom edge feeding into the printer first. 6. Click Continue to print side two.
Printing multiple pages on a single sheet of paper (N-up printing) You can select the number of pages that you want to print on a single sheet of paper. If you choose to print more than one page per sheet, the pages appear smaller and are arranged on the sheet in the order that they would otherwise be printed.
Printing booklets You can print booklets on letter or A4 paper. 1. Load the paper in the main input tray. 2. Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer properties (driver) for instructions. 3. On the Finishing tab, select the option to Print On Both Sides (Manually) .
5. Place the pages from side one back in the input tray. Side one should be facing down with the bottom edge feeding into the printer first. 6. Print side two.
Printing watermarks You can use the watermark option to print text "underneath" (in the background) of an existing document. For example, you might want to have large gray letters reading Draft or Confidential printed diagonally across the first page or all of the pages of a document.
40 Chapter 2 Printing tasks ENWW.
3 Maintenance This chapter provides information on the following topics: ● Cleaning the printer ● Changing the pickup roller ● Cleaning the pickup roller ● Changing the printer separation pad .
Cleaning the printer Clean the outside of the printer with a clean, damp cloth when necessary. CAUTION Do not use ammonia-based cleaners on or around the printer. During the printing process, media, toner, and dust particles can accumulate inside the printer.
3. With a dry, lint-free cloth, wipe any residue from the media path area and the print cartridge cavity. 4. Replace the print cartridge, and close the print cartridge door.
NOTE For best results use a sheet of transparency. If you do not have any transparencies, you can use copier-grade media, 70 to 90 g/m 2 (18 to 24 lb), with a smooth surface. 1. Make sure that the printer is idle and the Ready light is on. 2. Load the media in the input tray.
Changing the pickup roller Normal use with good media causes wear. The use of poor media might require more frequent replacement of the pickup roller. If the printer regularly mispicks (no media feeds through), you might need to change or clean the pickup roller.
3. Find the pickup roller. 4. Release the small, white tabs on either side of the pickup roller, and rotate the pickup roller toward the front. 5. Gently pull the pickup roller up and out. 6. Position the new pickup roller in the slot. The circular and rectangular slots on each side will prevent you from installing the roller incorrectly.
8. Reinstall the print cartridge, and close the print cartridge door. 9. Plug the printer into the power outlet, and then turn on the printer. ENWW Changing the pickup roller 47.
Cleaning the pickup roller If you want to clean the pickup roller rather than replace it, follow the instructions below: 1. Remove the pickup roller as described in steps 1 through 5 of Changing the pickup roller . 2. Dab a lint-free cloth in isopropyl alcohol, and scrub the roller.
Changing the printer separation pad Normal use with good media causes wear. The use of poor media might require more frequent replacement of the separation pad. If the printer regularly pulls multiple sheets of media at a time, you might need to change the separation pad.
4. Insert the new separation pad, and screw it into place. 5. Plug the printer into the power outlet, and turn on the printer. 50 Chapter 3 Maintenance ENWW.
Redistributing toner When toner is low, faded or light areas appear on the printed page. You might be able to temporarily improve print quality by redistributing the toner, which means that you might be able to finish the current print job before replacing the print cartridge.
If the print is still light, install a new print cartridge. See Changing the print cartridge for instructions. 52 Chapter 3 Maintenance ENWW.
Changing the print cartridge CAUTION To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the print cartridge with a sheet of paper. 1. Open the print cartridge door, and remove the old print cartridge. See the recycling information inside the print cartridge box.
4. Insert the new print cartridge in the printer, making sure that the print cartridge is in position. Close the print cartridge door. CAUTION If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric .
4 Problem solving This chapter provides information on the following topics: ● Finding the solution ● Status light patterns ● Paper handling problems ● Printed page is different than what appe.
Finding the solution You can use this section to find the solution to common printer problems. Step 1: Is the printer set up correctly? ● Is the printer plugged into a power outlet that is known to work? ● Is the on/off switch in the on position? ● Is the print cartridge properly installed? See Changing the print cartridge .
Step 4: Is the print quality acceptable? Yes If the print quality is acceptable, go to Step 5: Is the printer communicating with the computer? No If the print quality is poor, see Improving print quality . Verify that the print settings are correct for the media you are using.
Status light patterns Light status legend Symbol for "light off" Symbol for "light on" Symbol for "light blinking" Control panel light message Light status State of the printer Action Ready The printer is ready to print. No action is necessary.
Light status State of the printer Action Attention: door open, media out, no print cartridge, or media jam This printer is in an error state that requires operator intervention. Check the following: ● The print cartridge door is completely closed. ● Media is loaded.
Paper handling problems Choose the item that best describes the problem: ● Media jam ● Print is skewed (crooked) ● More than one sheet of media feeds through the printer at one time ● Printer .
Printer curled the media ● See Curl or wave for more information. ● See Media paths or Choosing paper and other media for more information. Print job is extremely slow The maximum speed of the printer is up to 12 ppm for A4 media and 12 ppm for letter media for the HP LaserJet 1018 printer.
Printed page is different than what appeared on screen Choose the item that best describes the problem: ● Garbled, incorrect, or incomplete text ● Missing graphics or text, or blank pages ● Page.
Page format is different than on another printer If you used an older or different printer driver (printer software) to create the document or the printer properties settings in the software are different, the page format might change when you try to print using your new printer driver or settings.
Printer software problems Printer software problems Problem Solution A printer driver for the HP LaserJet 1018 printer is not visible in the Printer folder.
Problem Solution The printer is in Ready mode, but nothing prints. ● Restart the computer. ● Verify that all of the cables are properly seated and within specifications. This includes the USB and power cables. Try a new cable. ● Reinstall the printer software.
Improving print quality This section provides information about identifying and correcting print defects. Light or faded print ● The toner supply is low. See Redistributing toner for more information. ● The media might not meet HP's media specifications (for example, the media is too moist or too rough).
NOTE If these steps do not correct the problem, contact an HP-authorized dealer or service representative. Vertical lines ● The photosensitive drum inside the print cartridge has probably been scratched. Install a new HP print cartridge. See Changing the print cartridge for instructions.
Loose toner ● Clean the inside of the printer. See Cleaning the printer for instructions. ● Check the media type and quality. See Printer media considerations for more information. ● Install a new HP print cartridge. See Changing the print cartridge for instructions.
Page skew ● Make sure that the media is loaded correctly and the media guides are not too tight or too loose against the media stack. See Loading media into the input trays for more information. ● The input bin might be too full. See Loading media into the input trays for more information.
Toner scatter outline ● If large amounts of toner have scattered around the characters, the media might be resisting the toner. (A small amount of toner scatter is normal for laser printing.) Try a different media type. See Printer media considerations for more information.
Clearing jams CAUTION To prevent damage to the printer when clearing jams, including jams in the output bin, always open the print cartridge door and remove the print cartridge.
CAUTION To prevent damage to the printer when clearing jams, including jams in the output bin, always open the print cartridge door and remove the print cartridge. CAUTION To prevent damage to the print cartridge, minimize its exposure to direct light.
3. When you have removed the jammed media, replace the print cartridge, and close the print cartridge door. After clearing a media jam, you might need to turn the printer off and turn it back on again. NOTE When you add new media, remove all of the media from the input tray and straighten the stack of new media.
74 Chapter 4 Problem solving ENWW.
A Printer specifications This appendix provides information on the following topics: ● Environmental specifications ● Acoustic emissions ● Electrical specifications ● Physical specifications .
Environmental specifications Operating environment Install in a well-ventilated, dust-free area. Printer plugged into an AC outlet: ● Temperature: 10°C to 32.
Acoustic emissions Acoustic emissions 1, 2 Sound power level Declared per ISO 9296 Printing 3 L WA d = <6.2 Bels (A) and 62dB (A) Ready (PowerSave) Inaudible Sound pressure level, bystander position Declared Per ISO 9296 Printing 3 L WA d = ≤ 4.9 Bels (A) and 49dB (A) Ready (PowerSave) Inaudible 1 Values are subject to change without notice.
Electrical specifications WARNING! Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. Doing so might damage the printer and void the product warranty.
Physical specifications Dimensions ● Width: 370 mm (14.6 inches) ● Depth: 242 mm (9.5 inches) ● Height: 209 mm (8.2 inches) Weight (2,000-page cartridge installed) 5.8 kg (12.8 lb) NOTE Values are current as of April 1, 2004. Values are subject to change without notice.
Printer capacities and ratings Print speed ● 12 ppm for A4 media and 12 ppm for letter media ● First page out in as low as 10 seconds Main input tray capacity 150 sheets of regular weight 75 g/m 2.
Memory specifications Base memory 2 MB RAM ENWW Memory specifications 81.
82 Appendix A Printer specifications ENWW.
B Regulatory information FCC compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Declaration of Conformity statement Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 Manufacturer's Name: Hewlett-Packard Company Manufacturer's Address: 11311 Chinden Bo.
Regulatory statements Laser safety statement The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States.
Laser statement for Finland LASERTURVALLISUUS LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT HP LaserJet 1018 -laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle.
Environmental product stewardship program Protecting the environment Hewlett-Packard Company is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment.
HP LaserJet printing supplies In many countries/regions, this product's printing supplies (for example, print cartridge) can be returned to HP through the HP Printing Supplies Returns and Recycling Program. An easy-to-use and free take back program is available in more than 30 countries/regions.
Disposal of Waste Equipment by Users in Private Household in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.
Material safety data sheet Material Safety Data Sheets (MSDS) for supplies containing chemical substances (for example, toner) can be obtained by contacting the HP website at: http://www.hp.com/go/ msds or http://www.hp.com/hpinfo/community/environment/productinfo/safety .
C Warranty and licensing Hewlett-Packard limited warranty statement HP PRODUCT HP LaserJet 1018 printer DURATION OF LIMITED WARRANTY 12 month limited warranty HP warrants to you, the end-user customer, that HP hardware and accessories will be free from defects in materials and workmanship after the date of purchase, for the period specified above.
TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF .
Hewlett-Packard software license agreement ATTENTION: USE OF THE SOFTWARE IS SUBJECT TO THE HP SOFTWARE LICENSE TERMS SET FORTH BELOW. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS.
Print cartridge limited warranty This HP product is warranted to be free from defects in materials and workmanship. This warranty does not apply to products that (a) have been refilled, refurbished, r.
D HP parts and accessories This appendix provides information on the following topics: ● Ordering supplies ● Using HP print cartridges ENWW 95.
Ordering supplies You can increase the printer's capabilities with optional accessories and supplies. Use accessories and supplies specifically designed for the HP LaserJet 1018 printer to ensure optimum performance.
Item Description or use Order number Accessory part Input tray cover Used to cover the media in the input tray. Q2460-40004 (U.S.) Q2460-40005 (Europe) Ordering information (continued) ENWW Ordering s.
Using HP print cartridges The following sections provide information about HP print cartridges and instructions for redistributing toner and changing the print cartridge. HP policy on non-HP print cartridges Hewlett-Packard Company cannot recommend the use of non-HP print cartridges, either new, refilled, or remanufactured.
E Service and support This appendix provides information on the following topics: ● Availability of support and service ● Guidelines for repacking the printer ● How to contact HP ENWW 99.
Availability of support and service Around the world, HP provides a variety of service and support options for purchase. Availability of these programs will vary depending upon your location. HP Care Pack™ Services and Service Agreements HP has various service and support options that meet a wide range of needs.
Guidelines for repacking the printer Use the following guidelines when repacking the printer: ● Remove and keep the print cartridge. If the print cartridge is left in the printer, severe damage to the printer may occur.
How to contact HP If you need to contact HP for service or support, use one of the following links: ● In the United States, see http://www.hp.com/support/lj1018/ for the HP LaserJet 1018 printer.
Index A accessories, ordering 96 acoustics emissions 77 agreements, maintenance 100 Attention light 4 B blank pages 62 booklets, printing 37 C canceling a print job 17 cardstock guidelines for using 2.
lights Attention 4 Ready 4 status light patterns 58 loading media 150-sheet input tray 26 priority feed slot 26 M main input tray loading 26 location 4 media path 6 maintenance agreements 100 manual f.
printer media guides main input tray 6 priority feed slot 6 printer properties accessing 10 online help 10 printer, specifications 80 printing booklets 37 canceling 17 cardstock 33 custom-size media 3.
tray main input 4 troubleshooting blank pages 62 contacting HP support 57 creases 69 curl 69 Demo page 56 dropouts 66 garbled text 62 gray background 67 incomplete text 62 light or faded print 66 loos.
.
*CB419-90973* *CB419-90973* CB419-90 9 7 3 © 2006 Hew lett-P ackar d Development C ompany , L .P . www .hp.com.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) 1018 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) 1018 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) 1018 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) 1018 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) 1018 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) 1018 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) 1018 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) 1018. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) 1018 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
