Benutzeranleitung / Produktwartung WMA63 des Produzenten Hotpoint
Zur Seite of 28
For everyone you’ll ever be WMA63 WMA62 Installation and User Instructions for the Ultima Range ULTIMA BOOK 1666200010-02 04/07/2001 3:59 pm Page 1.
C ongr atulations on choosing Ultima!! 2 Adjustable feet Dispenser drawer Hot water inlet point and attached hose (grey) Cold water inlet point and attached hose (blue) Hooked end support Drainage hos.
The f ollowing instruc tions and information will help y ou to get the most out of your ne w machine... Safety first! Installing y our machine A typical wash progr amme The dispenser Cleaning and main.
Safety first ● Dispose of packaging materials carefully and keep them w ell away from children. ● When disposing of y our old machine, to minimise risk of injury to children, isolate from the electrical supply , remov e the door , the plug and cut the mains cable off flush with the appliance .
1. Choose a location... Where you install the machine will aff ec t its per formance. ● F or your safety and to comply with electrical regulations, seek professional advice if y ou want to install your machine in a bath or show er room. ● Make sure that the electrical sock et and water taps are easily accessible.
6 Hold the transit bolt and slide to the side and then pull out. The bolt and spacer should be remov ed intact. (see below) Using a screwdriv er , remov e the screw to release the plastic cov er . F irstly , unhook the grey drainage hose and proceed as f ollows, taking care not to loosen the hot and cold water fill hoses.
Make sure that the electrical sock et is accessible. T ak e the mains lead from the back of the machine and plug it into the socket. W e do not recommend wiring y our machine direc tly into the mains supply . Changing the mains lead If you hav e damaged the existing lead and need a new one, contact Hotpoint Ser vice UK on 08709 066066 or www .
Hot and cold fill 1 Unclip the grey and blue fill hoses from the back of the machine. 2 Connect the free end of the grey fill hose to the HO T water supply (see figure1). C onnec t the free end of the blue fill hose to the C OLD water supply . 3 T urn on your wat er supply and check for leaks.
● T ak e care when you remo ve the drain hose from the clips on the back of the machine. All machines are test ed with water before they lea ve the factor y so a small amount of water may still be in the hose. ● Do not remove the hooked end support from the GREY drainage hose when using any of the dr ainage methods detailed below .
7.Adjust the f eet... Once the machine is in plac e 10 6. Mov e the machine into position... Y our machine is heavy so care must be taken when moving it. T o help you we ha ve fitted wheels to the bottom rear of the machine. ● When moving the machine , tak e care not to kink or damage the hoses at the back of machine.
U sing your machine 11 The rest of this instruction book will help you to make the most of your new washing machine. W e hav e created the machine for the way y ou live, by listening to people just like you who use our products. Y ou will find that your new machine has many useful features and is easy t o use.
Sor t your laundry into groups by washcare labels. Load the machine , mak ing sure that clothes are not trapped in the door . Close the washing machine door by pushing it until it clicks.
Choose a suitable detergent ● F ollow the detergent manufacturer ’ s recommendations to mak e sure you use the correct amount for y our wash. ● T o achieve the best wash results , the water hardness , degree of soiling and load size need to be consider ed and the recommended amount of detergent used .
When you are using the pre-wash option with your selected programme add detergent to the pre-wash compartment ( l symbol). Add the deter gent for the main wash to the main compartment ( ll symbol). Dispensing liquid detergent The liquid retaining flap is preset for adding powder deter gent.
Door Locked Indica tor ... ‘Red Keyhole ’ symbol The ‘ Red K eyhole ’ symbol will illuminate 2 seconds after you ha ve pressed the ‘ Star t ’ button and will remain lit throughout the wash programme . The ‘ Red K eyhole ’ symbol will be flashing at the end of the programme to indicat e that the door is still lock ed.
W ash progr ammes Spin speed (rpm) W ash T emp ˚C W ash Label Press Button Display Window shows F abric 6kg White cotton and linen without special finishes 95 6kg Non-colourfast cotton, linen or visc.
W ash progr ammes 17 PROGRAMMES & OPTIONS 1.5kg W ool mix tures with cotton or rayon. 40 2.5kg Shrink resistant machine washable wool, woollen blankets.
W ash progr ammes 18 PROGRAMMES & OPTIONS 1kg F or freshening up lightly soiled items. W arning : not for woollen, silk or delicate items. 35 Once 800 Spin speed (rpm) W ash T emp ˚C W ash Label .
Options 19 Choosing an option button The featur es listed below are all av ailable with any wash programme selected. Stored Prog . ● This option allow s you to store your fa vorite progr amme for when you ne x t want to use it. Only one programme can be stored in this function.
20 Options PROGRAMMES & OPTIONS Any of the f ollowing optional wash features can be selected after the wash programme selection, with the exception of ‘F ast F or ward’ , which can only be ac tivated after the wash programme has started.
Options Rinse Hold ● This option holds clothes in the final rinse wa ter , keeping them fresh until you ar e ready to complete the programme . T o use this option press the ‘R inse Hold’ button once, illuminates in the display window abo ve the ‘R inse Hold’ option button.
Options The follo wing options can be selec ted to alter the nature of the chosen wash programme by changing the spin speed , number of rinses or the programme temper ature. T o choose a control option press the option button and scroll thr ough the option menu’ s, following the displa y window prompts.
Clean and dr y the dispenser drawer , syphons, grate and fabric conditioner exit channel. Regularly clean the outlet pipe area. Removing and cleaning the dispenser dra wer and compartments Note: Y ou should clean the dispenser dra wer regularly .
T roubleshooting ... The machine will not start... ● Close the door . Check that the machine has power . Choose a programme and press the ‘ ST ART ’ button. Check to see if a ‘Red Keyhole’ symbol is flashing in the display window , if so , see below .
T r oubleshooting ... The progr amme takes a long time... ● Some programmes do take a long time. T hings which can lengthen the programme time include low temperature and lo w pressure of the incoming hot water supply , or low cold water pressure . The machine mak es a noise or vibrates during a spin programme .
26 Hotpoint guar antee “Satisfaction guaranteed or your mone y back” W e give you a unique ‘ satisfaction guaranteed’ promise - valid f or 90 days - after you ha ve purchased your Hotpoint product. If there is a technical problem with your Hotpoint appliance simply call Hotpoint Repair service or go to our web-site at www .
SERVICE & GU AR ANTEE 27 A f ter sales ser vice “No compan y is better positioned to offer an after sales ser vice on a Hotpoint appliance than us - the manufacturer” As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts and labour guarantee for the first 12 months.
K ey con tac ts After Sales S er vice Over 1150 trained specialists, direc tly employed by us , ensure that you can have complet e confidence in both the appliances and services we offer . Repair Ser vice and Inf ormation Desk UK: 08709 066 066 (Open 8 to 8 Mon - F ri, 8 to 6 Sat & 10 to 4 Sun) www .
Ein wichtiger Punkt beim Kauf des Geräts Hotpoint WMA63 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hotpoint WMA63 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hotpoint WMA63 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hotpoint WMA63 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hotpoint WMA63 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hotpoint WMA63 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hotpoint WMA63 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hotpoint WMA63. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hotpoint WMA63 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
