Benutzeranleitung / Produktwartung DYN D8P des Produzenten Hoover
Zur Seite of 40
Instruction Book Instructions for installation and use.
.
.
8 kg 0.05 ÷ 0.8 MPa 85 cm 60 cm 52 cm.
.
.
.
Unpacking the Product Remove the machine from its packaging close to the final location of the machine. Step 1 . Remove all outer packaging from the machine. Check there is no damage to the machine before continuing the installation process. Step 2 .
Unpacking the Product Remove the machine from its packaging close to the final location of the machine. Step 1 . Remove all outer packaging from the machine. Check there is no damage to the machine before continuing the installation process. Step 2 .
W a ter Suppl y This machine should only be connected to a cold-water supply . The cold-water pressure should be between 0.5 and 8 bar (0.05-0.8 Mpa). Do not connect the machine to a single outlet instantaneous water heater . Before connecting the fill hose, check that the water is running from the water supply tap to be used.
W a ter Suppl y This machine should only be connected to a cold-water supply . The cold-water pressure should be between 0.5 and 8 bar (0.05-0.8 Mpa). Do not connect the machine to a single outlet instantaneous water heater . Before connecting the fill hose, check that the water is running from the water supply tap to be used.
Connecting the drainage pipe This machine must be connected in accordance with the water supply regulations. W ater bylaws prohibit connection to a sur face water drain.
Connecting the drainage pipe This machine must be connected in accordance with the water supply regulations. W ater bylaws prohibit connection to a sur face water drain.
Description of the Machine The Hoover washing machine details are indicated below: Step 5 . Switch off the machine at the end of the cycle by tur ning the Programme Selector to the OFF position. Step 6 . Select the spin programme and press the Start Pause button to star t the machine.
Description of the Machine The Hoover washing machine details are indicated below: Step 5 . Switch off the machine at the end of the cycle by tur ning the Programme Selector to the OFF position. Step 6 . Select the spin programme and press the Start Pause button to star t the machine.
The Control P anel T urning the Machine On T urning the Programme Selector to your chosen programme will turn the machine on. The Programme Selector must be returned to the OFF position between each wash cycle in order to reset the controls.
The Control P anel T urning the Machine On T urning the Programme Selector to your chosen programme will turn the machine on. The Programme Selector must be returned to the OFF position between each wash cycle in order to reset the controls.
Spin Speed When a programme is selected the maximum spin speed allowed for that programme appears on the display . Pressing the Spin Speed button will reduce the speed by 100rpm each time the button is pressed. The minimum speed is 400rpm, or continuing to press the button will eliminate the final spin completely .
Spin Speed When a programme is selected the maximum spin speed allowed for that programme appears on the display . Pressing the Spin Speed button will reduce the speed by 100rpm each time the button is pressed. The minimum speed is 400rpm, or continuing to press the button will eliminate the final spin completely .
Automa tic Fea tures KG Mode (Half Load) Available on the Cottons and Synthetics cycles, the intelligent sensor adjusts the water level and programme length throughout each phase of the cycle according to how much laundr y you load into the machine. The KG Mode indicator will light up when the intelligent sensor is weighing the laundr y .
Automa tic Fea tures KG Mode (Half Load) Available on the Cottons and Synthetics cycles, the intelligent sensor adjusts the water level and programme length throughout each phase of the cycle according to how much laundr y you load into the machine. The KG Mode indicator will light up when the intelligent sensor is weighing the laundr y .
Programme Descriptions For handling the various types of fabric and their level of dirtiness in your laundr y the washing machine has different programme groups according to type of wash, temperature, spin speed and duration (see Programme Guide).
Programme Descriptions For handling the various types of fabric and their level of dirtiness in your laundr y the washing machine has different programme groups according to type of wash, temperature, spin speed and duration (see Programme Guide).
Programme Guide 24 25 Programme Fabric T ype W ater T emp Recommended (C°) W ater T emp MAX (C°) Spin Speed MAX (RPM) Max Load Size (kg) Cottons, Colourfast and linen Cottons, Non- fast Coloureds, m.
Programme Guide 24 25 Programme Fabric T ype W ater T emp Recommended (C°) W ater T emp MAX (C°) Spin Speed MAX (RPM) Max Load Size (kg) Cottons, Colourfast and linen Cottons, Non- fast Coloureds, m.
Refer to the programme guide ( pag.24) ** ST ANDARD COTTON PROGRAMMES ACCORDING TO (EU) No 1015 /2010 and No 1061/2010 COTTON PROGRAMME with a temperatur e of 60°C COTTON PROGRAMME with a temperatur .
Refer to the programme guide ( pag.24) ** ST ANDARD COTTON PROGRAMMES ACCORDING TO (EU) No 1015 /2010 and No 1061/2010 COTTON PROGRAMME with a temperatu re of 60°C COTTON PROGRAMME with a temperatu r.
Laundry Items to avoid W e recommend that you do not wash under wired bras in the machine. Should the wires become detached they could cause damage to your clothes and the machine. If the wash care label states that the bra is machine washable then we advise placing it in a wash bag.
Laundry Items to avoid W e recommend that you do not wash under wired bras in the machine. Should the wires become detached they could cause damage to your clothes and the machine. If the wash care label states that the bra is machine washable then we advise placing it in a wash bag.
the wash cycle, the KG Mode will weigh the clothes and update the wash time remaining on the display ever y five seconds until the weight has been determined. In some programs in the initial phase of the cycle there are planned spin sequences to ensure optimal wash results.
the wash cycle, the KG Mode will weigh the clothes and update the wash time remaining on the display ever y five seconds until the weight has been determined. In some programs in the initial phase of the cycle there are planned spin sequences to ensure optimal wash results.
Step 4 . T urn the filter anti-clockwise until it stops in the ver tical position. Remove the filter and clean. Step 5 . Replace the filter and turn in a clockwise direction until locked in position. Replace the stopper in the hose and close the filter cover .
Step 4 . T urn the filter anti-clockwise until it stops in the ver tical position. Remove the filter and clean. Step 5 . Replace the filter and turn in a clockwise direction until locked in position. Replace the stopper in the hose and close the filter cover .
W ater on the floor around the washing machine... ● Is the fill hose tightened? If so, replace the rubber washers and re-tighten. ● Is the standpipe or the household drain blocked? If so, clear the blockage yourself or call a plumber .
W ater on the floor around the washing machine... ● Is the fill hose tightened? If so, replace the rubber washers and re-tighten. ● Is the standpipe or the household drain blocked? If so, clear the blockage yourself or call a plumber .
Power Failure If there is a power failure the wash cycle will be interrupted, and the wash programme and functions will be suspended. When the power is restored, the wash programme and functions will re-start from the same point and complete the programme.
Power Failure If there is a power failure the wash cycle will be interrupted, and the wash programme and functions will be suspended. When the power is restored, the wash programme and functions will re-start from the same point and complete the programme.
The guarantee excludes: ● Any faults which occur due to bad installation or misuse of the machine. ● Repair of, or interference with, the machine by any person not authorised by the manufacturer . ● Any parts which are fitted to the machine that are not original manufacturer’ s parts.
The guarantee excludes: ● Any faults which occur due to bad installation or misuse of the machine. ● Repair of, or interference with, the machine by any person not authorised by the manufacturer . ● Any parts which are fitted to the machine that are not original manufacturer’ s parts.
13.02 - 41038569 - Canon Italia - Business Services Channel - Printed in Italy - Imprimé en Italie.
Ein wichtiger Punkt beim Kauf des Geräts Hoover DYN D8P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hoover DYN D8P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hoover DYN D8P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hoover DYN D8P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hoover DYN D8P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hoover DYN D8P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hoover DYN D8P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hoover DYN D8P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hoover DYN D8P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
