Benutzeranleitung / Produktwartung VT-FX614A des Produzenten Hitachi
Zur Seite of 75
FOR YOUR SA FETY - 1 - VIDEO CASSETT E RECORDER VT-F X614A Ow ner's manual w/Cable Channel Changer Using these q uality features: • The VCR Plus+* pr ogramming system allows y ou to program the VCR for timer recording by simply entering a PlusCode* number .
FOR YOUR SA FETY - 2 - TABLE OF CONTENTS FOR YOUR SAFETY................................................................................................................ ..3 IMPORTANT SAFEGUARDS .........................................................
FOR YOUR SA FETY - 3 - FOR YOUR SA FETY POW ER SUPPLY: AC 120V, 60 Hz ONLY. The POW ER button turns the VCR on and of f, leaving the clock /timer unaf fected. If the unit is to be left unattended for a long per iod, it is recom mended that the unit be com pletely switched off and unplugged.
IMPORTA NT SAFEGUA RDS - 4 - IMPORTA NT SAFEGUA RDS In addition to the caref ul attention devoted to quality standards in the m anufac ture of your video product, safety is a maj or factor in the design of every instrum ent. But, safety is y our respons ibility too.
IMPORTA NT SAFEGUA RDS - 5 - 9 A ttachmen ts -- Do not use attachm ents unless recomm ended by the video product manuf acturer as they may cause hazards.
IMPORTA NT SAFEGUA RDS - 6 - This will prevent damage to the video product due to lightning and power- line surges. SERVICE 17 Servicing -- Do not attempt to ser vice this video product yourself as opening or removing c overs may expose y ou to dangerous voltage or other hazards.
IMPORTA NT SAFEGUA RDS - 7 - Item No. Function 1 POW ER button 2 Infrar ed receiver 3 Cassette compar tment 4 REC/IRT button 5 REW button 6 Infrared Tr ansmitter 7 F.
CUSTOMER CONTROLS - 8 - CUSTOMER CONTROLS A ccessories supplied Check and identify the acc essories s upplied. If any are miss ing or appear damaged, c onsult y our dealer.
CUSTOMER CONTROLS - 9 - Batteries for remote contr ol handset (R6) VCR Customer Controls VCR Rear Panel Item No. Function 22 23 24 25 26 27 AUDIO IN L, R jack s VIDEO IN jack IN FROM ANT . - signal input OUT TO T V - signal to TV VIDEO OUT jack AUDIO OUT L, R jack s Remote Control Customer Contr ols click for image of Remo te Control Item No.
CUSTOMER CONTROLS - 10 - 16 17 18 19 20 21 22 STOP button - stops play/record function F.FW D button - fast f orward or search CH (channel up/down) button LAST CH button - s witches to the TV channel .
REMOTE OP ERA TION - 11 - REMOTE OPERA TION • Install batteries in the remote contro l The remote control re quires two "A A " batteries. 1 Push the mark and hold it, then slide the cover in the direction of the arrow to remov e it.
REMOTE OP ERA TION - 12 - • Operating in the remote control Operating the VCR: 1 Make su re there is no obst acle between th e remote control an d VCR's infrared receiver. Note: You cannot operate the VCR if there is an obstacle (for ex ample, cof fee table, sof a, etc) between the VCR and rem ote control.
CA SSETTE TA PES - 13 - CA SSETTE TA PES • Ty pes Only use video cassettes with the mark in this VCR. • • • • • • • • • • • • • • • • • • • • • • • • .
CA SSETTE TA PES - 14 -.
BA SIC ANTENNA HOOKUP [A ] - 15 - BA SIC ANTENNA HOOKUP [A ] WITH THIS HOOKUP YOU CAN... • WA T CH A VA ILA BLE TV CHANNELS • RECORD A ND WATCH THE SAME CHA NNEL • RECORD ONE CHA NNEL A ND WATCH.
A DVA NCED ANTENNA HOOKUP -A V HOOKUP [B] - 16 - A DVA NCED ANTENNA HOOKUP -A V HOOKUP [B] WITH THIS HOOKUP YOU CAN... • WA T CH A VA ILA BLE TV CHANNELS • RECORD A ND WATCH THE SAME CHA NNEL • .
BA SIC CABLE HOOKUP [C] - 17 - BA SIC CABLE HOOKUP [C] WITH THIS HOOKUP YOU CAN... • WA T CH A VA ILA BLE CA BLE CHANNELS • RECORD A ND WATCH THE SAME CHA NNEL • RECORD ONE CHA NNEL A ND WATCH A.
A DVA NCED CABLE HOOKUP -A V HOOKUP [D] - 18 - A DVA NCED CABLE HOOKUP -A V HOOKUP [D] WITH THIS HOOKUP YOU CAN... • WA T CH A VA ILA BLE CA BLE CHANNELS • RECORD A ND WATCH THE SAME CHA NNEL • .
BA SIC CABLE HOOKUP -WITH CA BLE BOX [E] - 19 - BA SIC CABLE HOOKUP -WITH CA BLE BOX [E] WITH THIS HOOKUP YOU CAN... • WA T CH A VA ILA BLE CA BLE CHANNELS • RECORD A ND WATCH THE SAME CHA NNEL YOU CAN'T... • RECORD ONE CHA NNEL A ND WATCH A NOTHER ALL CHANNEL SELECTIO NS MUST BE MADE AT THE CABLE BOX .
A DVA NCED CABLE HOOKUP -WITH CA BLE BOX [F] - 20 - A DVA NCED CABLE HOOKUP -WITH CA BLE BOX [F] WITH THIS HOOKUP YOU CAN... • WA T CH A VA ILA BLE CA BLE CHANNELS • RECORD A ND WATCH THE SAME CHA NNEL YOU CAN'T... • RECORD ONE CHA NNEL A ND WATCH A NOTHER ALL CHANNEL SELECTIO NS MUST BE MADE AT THE CABLE BOX .
A DVA NCED CABLE HOOKUP -WITH CA BLE BOX AND SPLITTER [G] - 21 - A DVA NCED CABLE HOOKUP -WITH CA BLE BOX AND SPLITTER [G] WITH THIS HOOKUP YOU CAN... • WA T CH A VA ILA BLE CA BLE CHANNELS • RECORD A ND WATCH THE SAME CHA NNEL • RECORD ONE CHA NNEL A ND WATCH A NOTHER TO RECORD, ALL CHANNEL SELECTIONS MUST BE MADE AT T HE CABLE BOX.
SETTING THE CLOCK -AUTOMA TIC MODE - 22 - SETTING THE CLOCK -AUTOMA TIC MODE Note: An antenna or cable m ust be connected to the VCR bef ore y ou begin this operation. • Tips You'll need to set the clock when f irst hooking up your VCR, and any tim e the power goes out for m ore than 1 hour.
SETTING THE CLOCK -AUTOMA TIC MODE - 23 - and the clock set procedure (autom atic or m anual) m ust be repeated. • If the tim e displayed on the VCR drifts from the current tim e by more than one hour, selec t y our corr ect time zone and set the DST (Daylight Savings Tim e) (see page 19).
SETTING THE CLOCK - AUTOMA TIC MODE WITH CA BLE BOX - 24 - SETTING THE CLOCK - AU TOMATIC MODE WITH CA BLE BOX • If y our VCR i s hooked up to a cabl e box (Hookups [E], [F] or [G]) Note: Tur n on the cable box before s etting. 1 Turn on the TV an d select the vid eo channel (3 or 4).
SETTING THE CLOCK - AUTOMA TIC MODE WITH CA BLE BOX - 25 - • It may take about f ive minutes. • Since the VCR is sear ching for a broadc ast station that transm its a tim e signal, the channel indication on the cable box c hanges automatic ally .
SETTING THE CLOCK -TIME ZONE SETTING/ DA YLIGHT SA VING TIME SETTING - 26 - SETTING THE CLOCK -TIME ZONE SETTING/ DA YLIGHT SA VING TIME SETTING • What to do if the display ed time drifts from the current time by more than an hour Note: Tur n on the cable box with hookups [E], [F] or [G ] before setting.
SETTING THE CLOCK -TIME ZONE SETTING/ DA YLIGHT SA VING TIME SETTING - 27 - • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • .
SETTING THE CLOCK -MANUA LLY - 28 - SETTING THE CLOCK -MANUA LLY • To set the clock manually 1 Press the GUIDE b utton. The m ain on-scr een menu will appear on the T V screen. You may view all the on-s creen instruc tions in English, Frenc h, or Spanish.
SETTING THE CLOCK -MANUA LLY - 29 - • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 Press the number buttons to fill the hour and minutes.
PRE-TUNING THE VCR TUNE R - 30 - PRE-TUNING THE VCR TUNER Note: An antenna or cable m ust be connected to the VCR bef ore y ou begin this operation. • Presetting the r ecei ved channels w i thout usi ng a cable box (Hoo kups [A ], [B], [C] o r [D]) 1 Press the POW ER button t o turn on th e VCR.
PRE-TUNING THE VCR TUNE R - 31 - <CATV1> Ordinary cable <ANT> Internal or exter nal antenna <CATV2> Alternate cable (If CATV1 doesn't give you the channels you expect).
PRE-TUNING THE VCR TUNE R - 32 - with a TV program , a station identifier is displayed on the TV screen. • To add or erase channels The auto channel set procedure may memorize channels that are blank, have snow y pictures, or interference. You may skip these channels by erasing them.
PRE-TUNING THE VCR TUNE R - 33 - 5 Press the ST OP button to delete the chan nel, or press the PLAY button to add it. • • • • • • • • • • • • • • • • • • • • .
PRE-TUNING THE VCR TUNE R - 34 - ON: The s creen becom es blue and m utes sound when a channel without a broadcast signal on the VCR or a channel on which broadcas ting has finished. • If the signal is too strong, this func tion may not operate even if you specify <ON>.
CA BLE BOX SE TUP - 35 - CA BLE BOX SE TUP Note: This setup should be perf ormed if y ou receive all c hannels through a cable box (Hookups [E], [F] or [G]). The VCR can be progra mmed to: • A utomatically se lect channels on the cable box dur ing a timer record or V CR P lus+ delaye d recording operation.
CA BLE BOX SE TUP - 36 - • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •.
CA BLE BOX SE TUP - 37 - below. For exam ple, press (3) (7) for the Hitachi brand cable box. 11 Press the GUIDE b utton to enter your cable box brand . The VCR will change the cable box from channel 02 to channel 09 to conf irm that the c orrect code was entered.
PLA YBACK - 38 - PLA YBA CK • To play back a recorded tape 1 Turn on the TV an d select the vid eo channel (3 or 4). Or, if y ou are hook ed up wi th an audio/video cable, s et the TV to AUX or VIDEO .
PLA YBACK - 39 - 2 Press the REW b utton. The VCR rewinds the tape all the way to the beginning, then stops. • Press the EJ ECT button on the VCR to eject the tape.
SPECIA L PLAY BA CK FEA TURES - 40 - SPECIA L PLAY BA CK FEA TURES • Rew inding the tape Mov ie Re tu rn If your videocassette has the s afety tab removed, the VCR will stop and autom atically rewin.
SPECIA L PLAY BA CK FEA TURES - 41 -.
SPECIA L PLAY BA CK EFFECTS - 42 - SPECIA L PLAY BA CK EFFECTS • Variable speed play back Still Playback (Pause) Press the PA USE button on t he remote control to still the tape during play. The pic ture will "freeze". You may see s ome m inor noise or inter ference on the sc reen.
SPECIA L PLAY BA CK EFFECTS - 43 - 2 Press the (6) b utton to v iew the p icture one frame at a time. • Press the PAUSE button to r esume play. Skip playback While playing back your t ape you can skip forw ard by pressing the (6) b utton. The tape will searc h ahead for about a m inute and then resum e play ing.
SPECIA L PLAY BA CK EFFECTS - 44 - Visual Search This function let you search back ward and forward through the videotape while viewing it. Remote Control Illus tration. During play : Press the REW b utton to search in reverse. Press the F.FW D button t o search ahead.
SPECIA L PLAY BA CK EFFECTS - 45 - • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 Press the GUIDE b utton to end the settin g.
SHUTTLE CONTROL - 46 - SHUTTLE CONTROL • Using the shuttle r i ng on the r e mote contr ol The s huttle feature lets you control all the play back functions - PLAY, PAUSE, SLOW MOT ION, and SEARCH - using one convenient ring. If the shuttle ring is operated when the k ey function buttons are illuminated, the illumination goes off.
USING THE "INDEX" FEATURE - 47 - USING THE "INDEX" FEATURE • To find specific sections on a tape using the "INDEX" feature Jump to an Index Mark w ith INDEX A quick way to ac cess spec ific program segm ents is with the index searc h feature.
VIEWING THE ON-SC REEN DISPLA Y - 48 - VIEWING THE ON-SC REEN DISPLA Y • Sw itching betw een clock, ti me counter and time of remaini ng tape Press DISPLAY while the on-scr een display is dis play ed. The on- screen display switches in the order below together with the VCR's display.
INDEX WITH THE TIME COUNTER - 49 - INDEX WITH THE TIME COUNTE R • To find specific sections on a tape Indexing with the Tim e Counter You can set the time c ounter to mem orize a certain point in the video program ming, and you can return to that point automatic ally .
RECORDING A PROGRAM - 50 - RECORDING A PROGRA M • Before y ou record Note: The c assette safety tab must be in place in order to record. The VCR m ust be hook ed up properly f or recording. See the Sim ple Hookups at the beginning of this m anual. Copyri ght infringement warning Most television progr ams and f ilms ar e copy righted.
RECORDING A PROGRAM - 51 - (6) Press the REC b utton on t he remote control or t he REC/lRT butt on on the VCR. Recording will start and the indic ator on the VCR will appear. Notes: • Recording will not start unles s the cassette has the s afety tab in place.
RECORDING A PROGRA M - RECORDING TIPS - 52 - RECORDING A PROGRA M - RECORDING TIPS • To w atch one program w hi l e r ecor ding another (1) Once you h ave set the VCR fo r recording, press the VCR/T V button . The VCR indic ator disappears. Now, y ou will be viewing through y our T V only .
RECORDING A PROGRA M - RECORDING TIPS - 53 - (2) Press the ( 2) butto n to select the VCR SET UP operation . (3) Press th e (6) butto n to set the SAP options t o "ON". (4) Press th e (5) butto n to set the ST EREO/M ONO opt ion to "ST EREO".
RECORDING A PROGRA M - RECORDING TIPS - 54 - Note: W hen you select MONO, s ound is recorded as m ono even when a channel broadcas ts in stereo..
INSTA NT RECORDING TIMER - 55 - INSTA NT RECORDING TIMER • Using the Instant Recording Timer (IRT) The Ins tant Recording Tim er (REC/IRT button on the VCR) will let y ou m ake a sim plified tim er recording without having to use the program m ing timer.
DELA YED RECORDING - 56 - DELA YED RECORDING • Setting the VCR to record later Note: The c assette safety tab must be in place in order to record. W ith the delayed recording featur e, y ou c an set.
DELA YED RECORDING - 57 - Press the PRO GRAM button twice, this scr een will appear. Types of Delay ed Recordings ONE T IME Records one s how at a particular date and time. DAILY Records a s how at the same tim e every day of the week, Monday through Friday .
DELA YED RECORDING - 58 - • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7 Press the (2) button f or PM.
DELA YED RECORDING - 59 - • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 12 Press the POW ER button t o turn off t he VCR.
USING THE VCR PLUS + S YSTEM FOR RECORDING - 60 - USING THE VCR PLUS+ S YSTEM FOR RECORDING • A bout the VCR Plus+ sy stem This handy f eature m akes tim ed recording a s nap. Y ou don't need to enter the s pecific channel, date, tim e or duration of a pr ogram.
USING THE VCR PLUS + S YSTEM FOR RECORDING - 61 - Note in the exam ple that the channel number s are the sam e except for 20 (received on channel 8) and 42 (received on c hannel 38).
EA SY DELAYED RECORDING WITH THE VCR PL US + SYSTEM - 62 - EA SY DELAYED RECORDING WITH THE VCR PLUS + S YSTEM This setup should be perfor med if you are using an Antenna or Cable without a cable box.
EA SY DELAYED RECORDING WITH THE VCR PL US + SYSTEM - 63 - (5) Press the CH ( / ) button to m ove up and down through the channel list until you reach VCR Plus+ CH42. (6) Press the number buttons to assign your broadcast channel number to the corresponding V CR Plus+ channel.
EA SY DELAYED RECORDING WITH THE VCR PL US + SYSTEM - 64 - WEEKLY Records a s how at the same day and time every w eek . Note: If you accidentally enter a nonex istent PlusCode num ber, the VCR gives y ou an err or mess age that disappears f rom the s creen in about 10 seconds .
EA SY DELAYED RECORDING WITH THE VCR PL US + SYSTEM - 65 - Note: This number can be up to eight digits . If you enter a w rong digit, pr ess the CLEAR button and enter the correc t one. (5) Press the n umber butto ns to enter the Plu sCode number in t he VCR's memory.
PROGRA M REVIEW - 66 - PROGRA M REVIEW • Review ing w hat y ou have programmed You can look back over any of the recordings you have preset and if you need to, clear out any of the programs . Norm al program s will automatically once recording is complete, but daily and weekly setting must be c leared out m anually .
PROGRA MMING THE VCR REMOTE TO CONTROL YOUR TV - 67 - PROGRA MMING THE VCR REMOTE TO CONTROL YOUR TV The VCR remote control ca n be programmed to control many TV brands that are re mote controlled.
PROGRA MMING THE VCR REMOTE TO CONTROL YOUR TV - 68 - • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2 Point VCR remote control toward T V.
INTEGRA TING YOUR STEREO SY STEM WITH YOUR VC R - 69 - INTEGRA TING YOUR STEREO SY STEM WITH YOUR VCR • Hookup W hen your VCR is connected to a st ereo sy stem , you can: • Make high quality "audio only " recor dings for up to 6 hours (on a T-120 video cas sette tape).
COPYING TA PES FROM A CAM CORDER - 70 - COPYING TA PES FROM A CAM CORDER • Hookup You may use y our VCR to copy tapes from any cam corder onto s tandard VHS cassette tapes. Note: If your cam corder is not ster eo (has only one audio plug), c onnect it into the AUDIO IN-L input on the back of the VCR.
COPYING TA PES FROM A CAM CORDER - 71 -.
COPYING FROM ONE VCR TO A NOTHER VCR (DUBBING) - 72 - COPYING FROM ONE VCR TO A NOTHER VCR (DUBBING) • Hookup If you have two VCRs, y ou m ay use one VCR to record a tape that is being played back in the other VCR.
PROBLEM GUIDE / MA INTENANCE - 73 - PROBLEM GUIDE / MA INTENANCE • Problem gui de No pow er • Make s ure the VCR is plugged into an AC outlet. Remote control doesn't wor k • Make s ure the batteries are fr esh, and properly installed.
PROBLEM GUIDE / MA INTENANCE - 74 - Note: Mechanical s ound is heard during head cleaning. NOTE: Dirt acc umulation on the video heads will caus e the play back picture to becom e noisy. T he VCR may require the v ideo heads to b e professionally cleaned by a qualified serv ice dealer.
TECHNICA L SPECIFICA TIONS - 75 - TECHNICA L SPECIFICA TIONS • Technical specifications Form at: VHS Video Signal Sy st em: NTSC c olor EIA standard Record/Playback System: Video: 4 head Audio: VHS Hi-Fi ster eo record / play back system Tape Speed: 33.
Ein wichtiger Punkt beim Kauf des Geräts Hitachi VT-FX614A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hitachi VT-FX614A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hitachi VT-FX614A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hitachi VT-FX614A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hitachi VT-FX614A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hitachi VT-FX614A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hitachi VT-FX614A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hitachi VT-FX614A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hitachi VT-FX614A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
