Benutzeranleitung / Produktwartung P50V701 des Produzenten Hitachi
Zur Seite of 100
PLASMA TELEVISION Operating Guide for P50V701 IMPORTANT SAFETY INSTRUCTIONS................................................................................... .... 2-3 FIRST TIME USE ....................................................................
2 Important Safety Instructions SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HIT ACHI PLASMA TELEVISION Our reputation has been built on the quality, performance, and ease of service of HITACHI plasma televisions. Safety is also foremost in our minds in the design of these units.
3 Important Safety Instructions Power source This plasma television is designed to operate on 120 volts 60 Hz, AC current. Insert the power cord into a 120 volt 60 Hz outlet.
Accessories Check to make sure you have the following accessories before disposing of the packing material. Power Cord Remote Control 1.5V batteries For U.S. models: For optional accessories, please access our web site at: www.hitachi.us/tv Two “AA” size, CAUTION: 1.
5 A A B 4 in. 10 cm 12 in. 30 cm 50 " 1. Using metallic wire (two places) fasten the set to the clamping screw on the rear of the Plasma TV as shown below . Securing to a Wall 2 . Keep the Plasma television 4 inches away from the wall except when mounted using the wall mount bracket.
6 Pass the AC cord through Clamp #1 and connect The AC cord, power swivel cable and the signal cables can all be held together with Clamp #2 (included on the accesories bag). AC CORD Clamp #2: Use this clamp to hold the AC cord, power swivel connector and the signal cables.
7 How to set up your new HIT ACHI Plasma T elevision SETTING FOR WALL MOUNTING STEP (1) : Please locate th e STAND METAL on the back of t he TV . This metal is use to ho ld the TV and the Base ; so it needs to remove 4 screws from the STAND base in order to separate the TV from the Base.
8 How to set up your new HIT ACHI Plasma T elevision VIEWING T he best pictur e is seen by sitting direct ly in front of the TV and about 10 to 18 feet from the screen.
9 How to set up your new HIT ACHI Plasma T elevision This t elevision has a TV G uide On Sc reen TM feat ure which has the ab ility to s how you a customize d list of the prog rams and ch annel s avai lable in yo ur ar ea. Th e in forma tion f or the guid e is b roadc ast on diffe rent c hanne ls in different areas.
10 First time use 300-Ohm T win Lead This outdoor antenna cable must be connected to an antenna adapter (300-Ohm to 75-Ohm). Phono or RCA Used on all standard video and audio cables which connect to inputs and outputs located on the television’ s rear jack panel and front control panel.
11 Quick Reference Remote Control Buttons and Functions In addition to controlling all of the functions on your HIT ACHI Plasma TV , the new remote control is designed to operate different types of devices, such as, DVD Players, CBL (Cable Boxes), set-top-boxes, satellite receivers, and VCRs.
12 First time use PUSH TO OPEN CONTROL DOOR FRONT VIEW PUSH EJECT PHOTO INPUT Press this button to turn the Plasma Television ON/ OFF. It can als o be tur ned ON/O FF b y re mote control. The “MAIN POWER” button must be at stand-by mode.
13 REMOTE CONTROL sensor Point your remote at this area when selecting channels, adjusting volume, etc. INPUT-FRONT JACKS INPUT -FRONT provide composite Video jacks for connecting equipment with this capability , such as a DVD player or Camcorders .
14 First time use Rear Panel Connections IR Out / G-LINK TM T h is jac k p rov ide s I R o utp ut to yo ur ext ern al com pon ent s (VCR, Cable box, DVD player, etc.). This connection will allow you to control the external components with your Plasma Television’s remote control.
15 Rear Panel Connections (POD) module). Digital Cable Signal INSERT INSERT NOTE: 1. A digital cable subscription is required. 2. Do not insert a PCMCIA card into the CableCARD slot. If the CableCARD is properly installed or removed, the TV will display the following respective screens.
16 First time use The FRONT panel jacks are provided as a convenience to allow you to easily connect HDMI or DVI signals from a DVD, Set Top Box , Video Game as shown in the following examples (When c.
17 The FRONT panel jacks are provided as a convenience to allow you to easily connect a camcorder , DVD, Video Game and a VCR as shown in the following examples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal.
18 First time use NOTE: Cables are optional, except when specified. or Rear Panel Connections HDMI DIGITAL OUTPUT CAPABILITY HDMI OUTPUT HDMI to HDMI VCR #1 Cable TV coaxial cable 2-Way signal splitte.
19 Tips on Rear Panel Connections • S-VIDEO, Y - P B P R , or HDMI connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature.
First time use 20 Back of VCR OUTPUT VCR Video CONNECTING A VIDEO AND STEREO AUDIO SOURCE TO INPUT1 ~ FRONT INPUT 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (V IDEO ) j ack , as sh own on the Re ar P ane l t o th e right.
21 C ON NE C TI N G A C OM P ON EN T S O UR CE WI T H HD M I O R DVI CAP ABIL ITY TO H DMI 1, H DMI 2 OR HDM I FR ONT 1. Connect the HDMI or DVI to HDMI connection cable from the output of the HDTV set top box or DVD player to the HDMI input as shown on the Rear panel below .
22 First time use CONNECTING A COMPONENT AND STEREO AUDIO SOURCE TO INPUT 2 or 3: Y -P B P R . 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the Rear panel below .
23 CONNECTING A VIDEO AND MONAURAL AUDIO SOURCE TO INPUT 1 ~ FRONT INPUT 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (V ID EO) j ack , as sh own o n t he Re ar Pa ne l o n the right. 2. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO) jack.
24 First time use Connecting Exter nal Video Sour ces Your HITACHI Plasma Television is equipped with an AV Net feature. This feature helps to control your external Audio/Video equipment (VCR, Set Top Box, DVD, etc.). Once this is setup, it allows your IR Blaster cable to control your equipment using your HITACHI Plasma TV Remote Control.
25 Your HITACHI Plasma Television is equipped with a G-LINK TM feature. This connection is necessary for the TV Guide On Screen TM system to enable VCR recording features.
26 The Remote Control In addition to controlling all the functions on your HIT ACHI Plasma TV , the new remote control is designed to ope rate different types of VCR s, cable bo xe s, s et -t op -bo xe s, s at el li te r ec ei ve rs , DV D pl ay er s, and other audio/video equipment with one touch.
27 The Remote Control How to Use the Remote to Contr ol Y our TV NOTE: For automatic DAY/NIGHT picture mode settings, see page 64 . POWER button Press this button to turn the TV set on or off when th e re mo te i s in T V mo de . ( Se e pa ge 2 6 fo r in st ru ct ion s on how to set the remote control to TV mode).
How to Use the Remote to Contr ol Y our TV 1 8 28 The Remote Control IMAGE INPUT IMAGE INPUT IMAGE INPUT IMAGE INPUT 1 2 16:9 ST ANDARD 2 Use this aspect mode to display 16:9 sources like HDTV and DVD’s preserving the original 16:9 aspect ratio showing 100% of the size.
29 How to Use the Remote to Contr ol Y our TV The Remote Control NOTE: 1. Press the INFO button again or the EXIT button to return to normal viewing. 2.
30 How to Use the Remote to Contr ol Y our TV The Remote Control 1. Press the INPUTS button to cycle through the INPUTS sel ections until the PHOT O INPUT is selected. Press the SELECT button or CURSOR P AD 왘 . 2. Press the CURSO R PAD 왗 or 왘 to a ccess the next or previous photo.
31 The Remote Control How to Use the Remote to Contr ol Y our TV ROTATE Select this menu item to rotate selected photos either clockwise ( CURSOR PAD 왘 ) and counterclockwise ( CURSOR P AD 왗 ). SLIDESHOW Select this menu item to start a slideshow of the digital photos.
32 How to Use the Remote to Contr ol Y our TV The Remote Control VOLUME (VOL), MUTE button Pre ss t he VO LUME b utton ( 왖 or 왔 ) unt il y ou ob tain the desired sound level. To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc.
33 The Remote Control Your HITACHI Plasma TV incorporates one Tuner technology designed for improved viewing enjoyment This feature allows you to view Digital Channels and Video inputs on both the main picture and sub picture simultane ously , with separate contr ol.
34 The Remote Control Pictur e-In-Picture (PIP) PIP MODE PICTURE-IN-PICTURE Select CABLE/AIR or INPUT 1~3, Front from the INPUTS menu. Select a channel that has a 1080p/1080i/720p signal. T o prevent a pattern burn, occasionally move the sub-picture using the CURSOR PAD.
35 Pictur e-In-Picture (PIP) MAIN FREEZE Press the PAUSE button to freeze one frame of the picture you are currently viewing and the frozen frame will show in the Main Picture. Press the EXIT button to return to normal viewing. This feature is useful for freezing a picture frame with addr esses.
36 The Remote Control FUNCTION FOR YOUR CABLE BOX. This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system of your cable box (refer to pages 41-42 for pre-codes). 1. Turn ON your cable box.
37 The Remote Control YOUR SET-TOP-BOX/SATELLITE RECEIVER. This remote is designed to operate different types of set-top-box/satellite systems. You must first program the remote to match the remote system of your set- top-box/satellite systems (refer to pages 41-42 for pre- codes).
38 The Remote Control FUNCTION FOR YOUR DVD PLAYER. This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of your DVD player (refer to pages 41-42 for pre-codes). 1. Turn ON your DVD player.
39 The Remote Control YOUR VCR/PVR (Personal Video Recorder). This remote is designed to operate different types of VCRs/PVRs. You must first program the remote to match the remote system of your VCR/PVR (refer to pages 41-42 for pre-codes). 1. Turn ON your VCR/PVR.
40 The Remote Control INPUT ACCESS This optional feature allows the user of the remote control to setup it’s SOURCE SELE CT button to access the specified input of the TV. Setup for this feature is applicable to the remote control’s normal mode only and only applies to the DVD, PVR /VCR and SAT/CBL modes.
41 The Remote Control Remote Contr ol Codes Cable BRAND Codes General Instrument ........ 0869 Daewoo ......................... 0045 , 0278 , 0020, 0561 1479 A BC ........................ 0003, 0008, 0011 GOI................................. 0775, 1775 1278 Panasonic .
The Remote Control 42 Remote Control Codes DBS/PVR Codes Enterprise 0591 Sony 0533,1533,0864,1033, Combo BRAND ESA 0821,1268 1 431 Hughes Network Systems 0739 Fisher 0670,1919 Sova 1122 Philips 0739 F.
TV Guide On Screen Channel Manager Setup Timers Locks Audio Video Move SEL Select Power Swivel NOTE: The On Screen Display ( OSD ) for the different submenus shown in next pages are for illustration purposes only, therefore; doesn't reflect the actual apearance of the OSD of your HITACHI Plasma TV.
44 Timers Channel Manager On-Scr een Display T reble Adjust the treble. Bass Adjust the bass. Balance Adjust the balance. Audio Source Select between three Audio Sources. Internal Speakers Select internal or external speakers. Auto Noise Cancel Eliminates the noise between stations.
45 V ideo On-Screen Display Select VIDEO to adjust picture settings and improve pi ctu re qua lit y. You ca n i nde pen de ntl y c ust omi ze eac h o f the Video Inputs to your preference to increase viewing performance and pleasure depending upon the video program being viewed.
46 V ideo Color T emperature Set this to Hig h for cooler color with mor e blue, set to Medium for more natural color, set to Standard for accurate color or set to Black/White for more reddish color. Black Enhancement Use this function to enhance the shadow detail in dark scenes using the settings off, low , middle and high.
On-Screen Display 2. Vertical Position setting returns to "0" automatically after TV power Off/On. Video Aspect U se this function to select the Picture Format Aspect Ratio. Auto Aspect Autom atically adjust t he Aspec t Ratio dependin g on the input signal to fill the screen.
48 On-Screen Display V ideo Reset Video Settings This function allows you to Reset the Video Menu Settings of the pr esent input and return it to the Day -Dynamic VIDEO mode and also let you view the special Auto Movie Mode feature Smooth Motion Demo in both options 1.
On-Screen Display Video Reset Video Video Move SEL Re turn Select “Reset” to return to Video menu settings on this Input to the original factory settings.
Audio 50 Audio Select AUDIO to adjust the TV to your preference and to improve the sound quality . 1. Press CURSOR P AD 왖 or 왔 to select menu item. 2. Press CURSOR P AD 왗 or 왘 to adjust the function. 3. Press EXIT to quit the MENU , or select AUDIO to return to the main menu.
Audio Source Multi-Channel T elevision Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a weak stereo broadcast or SECOND AUDIO PROG (SAP) which may be a secondary language, weather report, etc. Internal Speakers This function is useful when setting up the external speakers.
TV Guide On Screen 52 TV Guide On Screen Move SEL Select Setup Timers Channel Manager Locks Audio Video Power Swivel The TV Gui de On Screen TM s ystem is a bu ilt-in featur e that provides a channel lineup and program listings in your area. Once the setup process is complete, the program listings are automatically updated several times a day .
53 On-Screen Display Screen 5: Would you like to use the TV Guide On Screen TM Use the CURSOR P AD 왖 and 왔 t o highlight your choice, then press the SELECT button then next. If YES: Please see Screen 6. If NO: Please see Screen 12. Screen 6: The screen will show the correct way to setup the VC R with the G-LINK TM .
54 Screen 11: Are the settings correct ? If Yes t he TV Guid e On Scre en TM s etup is c omple te, then press SELECT button to continue. If No pl eas e m ake th e n ece ssa ry cha nge s i n o rde r t o co mp le te th e TV G ui de On S cr ee n TM se tu p pro ce du re .
On-Screen Display channels. Channel Manager Select C HANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List. 1. Press CURSOR PAD 왖 , 왔 to highlight functions. 2. Press the SELECT button or CURSOR PAD 왘 to select.
56 Channel List This function allows you to review which channels are labeled (ID) , which have been added to CHANNEL MEMORY (SCAN) , which are protected by LOCK and which are your F AVORITE (F A V) CHANNELS . 1. Use the CURSOR P AD to navigate the Channel List.
Locks This f unction wil l block out the pictu re and soun d of the selected channel or video input. The code to enter the Locks feature is a four digit access code number. The factory preset code is 0000 . Use the NUMBER buttons to enter the access code.
58 Movie Ratings Use Movie Ratings to prevent viewing of any movie that you feel may be inappropriate due to its content. 1. Use the CURSOR PAD 왖 , 왔 to select the MOVIE RATING category that you want to block. 2. Press SELECT to block the MOVIE RA TING that you have selected.
Locks TV Ratings Use TV RATINGS to prevent the viewing of any TV program that you feel may be inappropriate due to its content. 1. Use the CURSOR PAD 왖 , 왔 to select the TV RATING category that you want to block. 2. Press SELECT to block the TV RATING that you have selected.
60 Canadian Ratings (Eng) Use CANADIAN RA TINGS (ENG) to block any type of movie and television program in Canada that you feel might be inappropriate in its content. 1. Us e t he C U RS O R PA D 왖 , 왔 t o s el e ct th e CANADIAN RATINGS (ENG) category that you want to block.
61 Locks Canadian Ratings (Fr n) Use CANADIAN RATINGS (FRN) to block Canadian French programs according to various program ratings that you feel might be inappropriate in its content. 1. Use the CURSOR PAD 왖 , 왔 to select the CANADIAN RATINGS (FRN) category that you want to block.
62 Alternate Ratings (Example Only) : G General audiences. All ages admitted. PG Parental guidance suggested. Some material may not be suitable for children. PG-13 Parents strongly cautioned. Some material may be inappr opriate for children under 13. R Restricted.
TV Guide On Screen Move SEL Select Setup Timers Channel Manager Locks Audio Video Power Swivel Timers Timers 63 On-Screen Display Set The Clock Timers Move SEL Return Time Zone : PST Date : Jan.
64 On-Screen Display Timers Set Sleep Timer Select this feature to set your SLEEP TIMER from 30 minutes to 3 hours (30 minute increments). 1. Press the CURSOR P AD 왘 repeatedly to set your Timer from 0:00, 0:30, 1:00, 1:30, 2:00, 2:30 and 3:00.
6 5 Setup On-Screen Display Select SETUP when setting your TV up for the first time. 1. Use the CURSOR PAD 왖 or 왔 to select the sub-menu of your choice. 2. Press the SELECT button to select. Setup the Language and background of the Menu OSD. This feature will allow you to select any one of three differ ent languages for all on-screen displays.
66 On-Screen Display This function allows you to choose from two menu backgrounds. SET THE MENU BACKGROUND (SHADED OR SOLID) of your choice. Use the CURSOR PAD 왗 or 왘 to select shaded or solid. 2. Select SOLID for a black background (no picture can be seen behind menu screen), select SHADED and a light background is visible.
67 On-Screen Display Setup Set The Inputs Use this feature to give a name to any of the seven video inputs. 1. Press the CURSOR PAD 왖 or 왔 to highlight the video inputs.
68 Setup On-Screen Display AV NET SETUP WIZARD ( Example: A/V RECEIVER Setup) 1. Press the SELECT button to start the SETUP WIZARD. 2. Use the CURSOR PAD 왖 or 왔 to highlight YES or NO. 3. Press the SELECT button to select “YES”. (Select YE S to setup an A/ V Receiver or NO to setup other devices).
69 On-Screen Display Setup 15. If you would like to label your A/V Receiver Source, use the CURSOR PAD 왗 or 왘 to highlight “ Yes “ then press the SELECT but ton to c onti nue. Sele ctin g “ No “ wil l by pass the Sour ce labeling. 16. Use the CURSOR PAD 왖 or 왔 to select your A/V Receiver Sources.
70 Setup On-Screen Display 8. Use the CURSOR PAD 왗 or 왘 to choose the brand name of your DVD. 9. Press the CURSOR PAD 왔 to highlight the IR CODE Set, th en use the CUR SOR PAD 왗 or 왘 to choose the preset IR Code. 10. Use the CURSOR PAD 왔 to highlight the " POWER ” T est button.
71 On-Screen Display Setup 5. Use the CURSOR PAD 왗 or 왘 to select “Other” fr om brand name choices. 6. Use the CURSOR PAD 왖 or 왔 to highlight “Learning Mode” then press the SELECT button. 7. Use the CURSOR PAD 왗 , 왘 , 왖 and 왔 to select the Soft Key to lea rn (Ex.
72 Setup On-Screen Display 16. Use the CURSOR PAD 왗 or 왘 to select the A /V R ec ei ve r So ur ce i f y ou h av e co nn ec te d t he Monitor Out and Optical Out to the A/V Re ce iv er.
73 On-Screen Display Setup 7. Use the CUR SOR PAD 왗 or 왘 to ch oose the device you wish to learn. (Example: DVD 3) 8. Select NEXT to continue. 9. Select the DVD 3 softkey to learn.
74 On-Screen Display Setup 19 . Co nti nu e w ith th e nor mal pr oce du res to se tu p TV Input, Monitor Out, Optical Out and the labeling of the source buttons. 20 . Sel ec t “Y ES ” to se tu p an oth er d ev ic e or se le ct “No thanks, I’m done” to exit the AV NET setup.
75 On-Screen Display Setup Set The Cl osed Caption s Closed Captions are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen. Your local TV program guide denotes these programs as or .
7 6 On-Screen Display Move SEL Return IR Out : Normal Length Setup This feature allows the customer to hide and operate exter nal hom e theate r compon ents (VC R, DVD player o r 3. Press EXIT to quit menu or select SET THE IR The IR Out options ( IR Passthru feature) are related to the distance between the original remote control 2.
77 On-Screen Display After the CableCARD has been successfully installed, you can access CableCARD Information menu in the SETUP menu of the On-Screen Display . 1. Press the MENU button on the Remote Control to access the Main Menu screen. Follow the instructions below to access the CableCARD Information menu.
78 Setup This feature will select QUICK START UP options. Set this feature to ON to have the TV tune channels (both Analog and Digi tal) quickly when first tur ning the TV on.
79 On-Screen Display Power Swivel This feature controls the motorized stand. It allows the customer to turn the Plasma Television left or right using the remote control. This feature is only available when the Table Top Stand is connected (see page 6).
80 Equipment Care and T r oubleshooting TROUBLESHOOTING Your HITACHI Plasma Television incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR TO HA VE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1.
81 Useful Information l Reception Problems IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances.
Useful Information 82 Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
83 Useful Information l All specifications, weights, and dimensions are subject to change without prior notice. Please access www.hitachi. us /tv for detailed specifications and dimensions for custom installations. UltraVision Digital is a registered trademark of Hitachi Home Electronics (America), Inc.
84 Useful Information 50 Inch Models (Includes T able T op Stand) W eight (lbs./kg): 109.7/49.8 Rear View, Use as Reference for Wall Mount Bracket Set Dimensions Units Inches 48-13/16 2- 9/16 2- 9/16 34-11/16 32- 5/16 20- 3/16 19-15/16 17- 9/16 43- 9/16 24-11/16 5- 1/16 3-10/16 1- 7/16 16-10/16 12 24-13/16 12 11-12/16 12- 2/16 8-7/16 mm 1240.
85 Useful Information l HOME ELECTRONICS DIVISION HIT ACHI has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of HITACHI Authorized Service Facilities has been established in all 50 states and Puerto Rico.
86 Useful Information Look on the right side of the TV. Locate the LABEL where it shows the information r elated to MODEL NAME and SERIAL #. HITACHI Service Department will require this information in order to give y ou the proper support regarding your questions.
End User License Agr eement for HIT ACHI DTV Softwar e END USER LICENSE AGREEMENT FOR HIT ACHI DTV SOFTW ARE IMPORTANT – READ CAR EFULLY: This End User License Agreement fo r HIT ACHI DTV Software (.
174 L ic en s e Ag r ee me nt s OPERATING SYSTEM LICENSE INFORMATION This HITACHI TV incorporates certain open source operating system software distributed under the GNU GENERAL PUBLIC LICENSE Version 2 and GNU LESSER GENERAL PUBLIC LICENSE Version 2.
175 L ic en s e Ag r ee me nt s Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
176 In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
177 TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND F ITNESS FOR A P ARTICULAR PURPOSE. THE ENTIRE RISK AS T O THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSAR Y SERVICING, REP AIR OR CORRECTION.
178 Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
179 straightforwardly into another language. (Hereinaft er, translation included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modification to it.
180 a work containing portions of the Library , and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
181 or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time.
Appendixes Appendixes 182 Appendix A: Picture Format for Each Input Source Aspect Specifications Yes : Selectable - : Un-selectable Input Auto Aspect Aspect Signal Aspect Video ID 16:9 Standard 1 16:9.
Appendixes 183 Appendixes (Continuation) I nput A uto A s pec t A s pe c t S igna l A s p e c t V ideo I D 16 : 9 Standard 1 16:9 Standard 2 16:9 Zoom 4:3 Standard 4:3 Ex panded 4:3 Zoom 1 4:3 Zoom 2 .
184 Index A Accessories, . . . . . . . . . . . . . . . . . . . . . . . . . .4 Antennas (Connecting), . . . . . . . . . . . . . . . . .8 Aspect Ratio, . . . . . . . . . . . . . . . . . . . . .2 8 , 47 Audio Bass Boost . . . . . . . . . . . . . . . . . .
Notes.
Notes.
Ein wichtiger Punkt beim Kauf des Geräts Hitachi P50V701 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hitachi P50V701 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hitachi P50V701 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hitachi P50V701 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hitachi P50V701 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hitachi P50V701 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hitachi P50V701 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hitachi P50V701. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hitachi P50V701 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
