Benutzeranleitung / Produktwartung DVP725U des Produzenten Hitachi
Zur Seite of 35
DIGITAL VIDEO INSTRUCCIONES EN ESP AÑOL INCLUID AS. D VD PLA YER INSTR UCTION MANU AL INSTRUCTIONS EN FRAN Ç AIS INCLUS. Instruction manual T o obtain the best perf or mance and ensure years of troub le- free use, please read this instruction manual completely .
– 2 – EN 1L01 W ARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. LASER SAFETY This unit employs a laser . Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury .
– 3 – EN 1L01 English IMPOR T ANT SAFEGUARDS 1) Read Instructions - All the safety and operating instruc- tions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference.
(approx. 3 feet (100 cm) long) (TE14751) – 4 – EN 1L01 A NOTE ABOUT RECYCLING This product ’ s packaging materials are recyclable and can be reused.
– 5 – EN 1L01 English T ABLE OF CONTENTS ■ LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ■ IMPORTANT SAFEGUARDS.
– 6 – EN 1L01 FEA TURES ¡ Progressive Scan system Unlike conventional interlace scanning, the progres- sive scan system provides less flickering andimages in higher resolution than that of traditional television signals. ¡ Dolby Digital sound This player can handle Dolby Digital surround sound having 5.
– 7 – EN 1L01 English ABOUT THE DISCS The following discs can be played back on this DVD player . This player conforms to the NTSC color system. Y ou can- not play discs recorded in other color systems such as P AL or SECAM. ¡ Some discs include region codes as shown below .
– 8 – EN 1L01 OPERA TING CONTROLS AND FUNCTIONS FRONT P ANEL REMO TE CONTROL +10 CLOSE 3 MODE 2 SEARCH OPEN 9 ZOOM DISPLAY 8 AUDIO 0 TOP MENU SETUP FF PLAY SKIP SEARCH CH 56 1 A-B REPEAT REPEAT 7 .
– 9 – EN 1L01 English A-B REPEAT REPEAT MODE ZOOM ANGLE SUBTITLE AUDIO DISPLAY SURROUND MODE SEARCH CLOSE OPEN 2 1 3 8 7 9 5 4 6 0 +10 CLEAR PO WER/ST ANDBY Button A-B REPEA T Button REPEA T Button MODE Button SUBTITLE Button D VD VCD CD • T urns the player on and off.
– 10 – EN 1L01 TOP MENU SETUP SKIP FF SEARCH MENU FR SEARCH RETURN ENTER PLAY STOP TV POWER VIDEO/TV PAUSE/STEP CH VOL TV MENU Button T OP MENU Button ENTER Button (UP/DO WN or LEFT/RIGHT Button) .
– 11 – EN 1L01 English DISPLA Y DISPLA YS DURING OPERA TION LOADING THE BA TTERIES Stays on when the inserted disc is being played back. CD: Lights up when a CD is inserted on the tray . VCD: Lights up when a V ideo CD is inserted on the tray . Lights up when a D VD is inserted on the tray .
– 12 – EN 1L01 HOOKUPS DESCRIPTION-REAR P ANEL S-VIDEO OUT COMPONENT VIDEO OUT ANALOG A UDIO OUT DIGIT AL A UDIO OUT VIDEO OUT Y C B /P B C R /P R RL COAXIAL OPTICAL 1 23 4 5 PROGRESSIVE I P 6 1. DIGIT AL A UDIO OUT JA CKS: Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiber .
– 13 – EN 1L01 English ANALOG AUDIO OUT RL RL Stereo system Dolby Digital decoder DTS decoder CONNECTION TO AN AUDIO SYSTEM Optical cable (not supplied) ¡ Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 15 cm or more when storing them.
– 14 – EN 1L01 CONNECTION TO A TV (FOR VIDEO) DV D Analog Audio out V ideo out • Method 1 DVD Player + TV with V ideo Input Jack • Method 2 DVD Player + TV with S-V ideo Input Jack • Method .
– 15 – EN 1L01 English PLA YING A DVD VIDEO OR AN AUDIO CD OR A VIDEO CD Getting started T urn on the power of the TV , amplifier and any other components which are connected to the DVD player . (Change the input system to suit the DVD player , and check that the sound volume is correct.
– 16 – EN 1L01 USING THE TITLE MENU W ith a DVD containing a title menu, you can select desired titles from the menu. 1 Press the T OP MENU button. ¡ The title menu will appear . 2 Select the desired title. ¡ Press the arrow buttons ( L / K / B / s ) to change the setting, and then press the ENTER button.
High speed play back ¡ T urn the Shuttle Ring in either direction during play- back. The further the ring is rotated, the faster the play- back speed in the forward (FWD) or reverse (REV) direction. Keeping the ring in the rotated position cycles the playback speed every 1.
– 18 – EN 1L01 CHAPTER SEARCH: 1 Directly enter the desired c hapter number- with the numeric b uttons when the disc is being play ed or paused. ¡ When you finish entering the number , the selected title or chapter will start automatically . TIME 1:23:30 TOTAL 1:29:00 ST AR TING FROM A DESIRED TIME COUNT 1 Press the SEARCH MODE button twice.
– 19 – EN 1L01 English The whole Disc is played back repeatedly . REPEAT [ALL] REPEAT [TRACK] The current T rack is played back repeatedly . No repeat playback. REPEAT [OFF] If the REPEA T button is pressed once dur- ing program/random pla yback, the current track is pla yed back repeatedl y .
– 20 – EN 1L01 Notes ¡ Adding programs is not possible during program playback. Y ou must stop the current playback before such operations can be carried out. ¡ Press the CLEAR button to cancel a program. The most recently entered program will then be deleted.
– 21 – EN 1L01 English CHANGING THE ONSCREEN DISPLA Y DURING MP3 DISC PLA Y The information on an MP3 disc in play can be checked. 1 Press the DISPLA Y button during playbac k. ¡ The TRACK currently in play will be highlighted. 2 Press the DISPLA Y button again.
– 22 – EN 1L01 ¡ Press the s button to go to the next upper hierarchy . ¡ If the entire program cannot be displayed at once on the screen, “ L ” appears to go to the next page. 3 When the disc has been programmed, press the PLA Y button. ¡ Programmed play starts.
– 23 – EN 1L01 English CHANGING THE CAMERA ANGLE (Multi-Angle Pictures) The DVD player has a function which allows you to select the desired camera angle. 1 Press the ANGLE button during pla yback. ¡ If the disc contains sequences recorded from differ- ent camera angles, the angle icon ( ) will appear at the top-right of the screen.
– 24 – EN 1L01 CHANGING THE ON-SCREEN DISPLA Y TT 1/2 0:00:00 -1:23:45 TT(Title): Current title number / the number of total titles. TIME: Elapsed time of the current title on remaining time of the current title. Y ou can check the information about the disc by pressing the DISPLA Y button on the remote control.
– 25 – EN 1L01 English 1 Press the SETUP button in ST OP mode . ¡ The setup screen will appear . 2 Press the K / L buttons to select Langua g e, and then press the ENTER button. 3 Press the K / L buttons to select an item, and then press the ENTER button.
– 26 – EN 1L01 1 Press the SETUP button in ST OP mode. ¡ The setup screen will appear . 2 Press the K / L buttons to select DISPLA Y and then press the ENTER button.
DTS (Default : OFF) BITSTREAM : Output DTS sound Set to BITSTREAM when the unit is connected to DTS Decoder . DO WN SAMPLING (Default : AUTO) Set the output for the DVD recorded in PCM 96kHz (96kHz or 48kHz, or AUTO) ¡ Press the K / L buttons to select an item, and then press the ENTER button.
– 28 – EN 1L01 When Parental Level is selected ¡ Press the K / L buttons to select an item from ALL or 8 to 1, and then press the ENTER button. 5 Press the SETUP button. ¡ The setup mode will be canceled and the ordinary screen will appear . CONTROL LEVELS ¡ ALL All parental lock is cancelled.
– 29 – EN 1L01 English LANGUAGE CODE LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 No.
– 30 – EN 1L01 CONTROLLING THE TV Once programmed, the DVD ’ s remote control is ready to control the TV . NOTE: Be aware that not all of your TV ’ s functions may work even though the remote control is correctly programmed. T o operate the TV ¡ Y ou can turn on your TV by pressing the TV POWER button.
The tray cannot be open or close. ¡ The setup menu is displayed. ¡ Cancel the setup mode. Symptom Cause Remedy No power ¡ Loose power plug. ¡ Insert the power plug firmly into the wall outlet. The player does not respond to the remote control. ¡ The remote control is not aimed at the sensor on the player .
– 32 – EN 1L01 HANDLING PRECAUTIONS SERVICING Should your DVD player become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. T urn off, unplug the power cord, and please call our help line at 1-800-448- 2244, to locate an Authorized Service Center .
– 33 – EN 1L01 English SPECIFICA TIONS Product type : DVD Player Discs : DVD video Audio CD V ideo CD Output signal format : NTSC color Frequency response DVD (linear sound) : 20 Hz to 22 kHz (sam.
MEMO.
0VMN03021 E5615UD ★★★★★ QR???? C Hitachi, Ltd. 2002 Printed in China Hitachi has made e ver y effort to assure you hours of tr ouble free operation from y our unit . However , should y ou require service , a netw ork of Hitac hi A uthorized Service Facilities has been established in all 50 states and Puerto Rico .
Ein wichtiger Punkt beim Kauf des Geräts Hitachi DVP725U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hitachi DVP725U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hitachi DVP725U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hitachi DVP725U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hitachi DVP725U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hitachi DVP725U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hitachi DVP725U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hitachi DVP725U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hitachi DVP725U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
