Benutzeranleitung / Produktwartung 65T500A des Produzenten Hitachi
Zur Seite of 80
PROJECTION COLOR TV 57T500 57X500 65T500 65X500 OPERA TING GUIDE IMPORT ANT SAFETY INSTRUCTIONS 2-3 FIRST TIME USE 4-22 THE REMOTE CONTROL ON-SCREEN DISPLA Y USEFUL INFORMA TION INDEX 72-78 45-71 23-44 Setup Locks Aspect Audio Video Move SEL Sel Ch. Manager As an E NERGY S TA R ® Partner , Hitachi, Ltd.
IMPORT ANT 2 SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HIT ACHI TELEVISION Our reputation has been built on the quality , performance, and ease of service of HIT ACHI televisions.
IMPORT ANT 3 Read before operating equipment Follow all warnings and instructions marked on this television. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
ACCESSORIES 4 1. Simple Remote Control Unit CLU-120S (Part No. HL01861). 2. Remote Control Unit CLU-5725TSI (Part No. HL01825). 3. T wo “AA” size, 1.5V batteries (For Remote Control Unit). 4. T wo “AAA” size, 1.5V batteries (for Simple Remote Control Unit).
HOW T O SET UP YOUR NEW HIT ACHI PROJECTION TV 5 CAUTION: Magnetic fields, such as those of external speakers, may cause the picture to distort if they are placed too close to the television. Move the magnetic field source away from the television until there is no picture distortion.
HOOK-UP CABLES AND CONNECT ORS 6 ANTENNA CONNECTIONS TO REAR JACK P ANEL VHF (75-Ohm) antenna/CA TV (Cable TV) When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CA TV coaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna or cable TV system, connect the coaxial cable to the ANT B terminal.
FRONT P ANEL CONTROLS 7 FIRST TIME USE POWER INPUT 5 S-VIDEO VIDEO AUDIO L/MONO R EXIT INPUT SELECT MENU MAGIC FOCUS VOL- VOL+ CH- CH+ POWER CURSOR PHOTO.
FRONT P ANEL JACKS AND CONNECTORS 8 The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks.
REAR P ANEL JACKS 9 Antenna Input/Output The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture.
REAR P ANEL JACKS 10 Component: Y -P B P R Inputs Inputs 1 and 2 provide Y -P B P R jacks for connecting equipment with this capability , such as a DVD player or Set T op Box. Y ou may use composite video signal for INPUT :2. NOTES: 1. Do not connect composite VIDEO and S-VIDEO to Input 3, 4 or 5 at the same time.
REAR P ANEL CONNECTIONS 11 NOTE: 1. Connect only 1 component to each input jack. 2. Follow connections that pertain to your personal entertainment system. 3. Composite video signal can be input to Input2~Input5. 4. Cables are optional except when noted as provided.
FIRST TIME USE REAR P ANEL CONNECTIONS 12 NOTE: 1. Connect only 1 component to each input jack. 2. Follow connections that pertain to your personal entertainment system. 3. Composite video signal can be input to Input2~Input5. 4. Cables are optional except when noted as provided.
13 TIPS ON REAR P ANEL CONNECTIONS FIRST TIME USE • S-VIDEO connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these con- nections in place of the standard video connection if your device has this feature.
14 FIRST TIME USE CONNECTING EXTERNAL AUDIO DEVICES To control the audio level of an external audio amplifier with the remote control, connect the system as shown below. NOTE: 1. T o prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust the sound using the remote control of the TV set.
15 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A MONAURAL AUDIO SOURCE TO INPUT2~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO) jack.
16 FIRST TIME USE CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO SOURCE TO INPUT2~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
17 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
18 FIRST TIME USE CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE WITH DVI-HDTV CAP ABILITY TO INPUT 1 OR INPUT 2 (Models: 57/65X500) 1. Connect the DVI connection cable from the output of the HDTV set top box or DVD player to the DVI-HDTV input as shown on the TV set below .
FIRST TIME USE 19 FIRST TIME USE CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y -P B P R . 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below .
20 CONNECTING A V NETWORK Y our Hitachi T elevision is equipped with an A V Network feature. This feature helps to control your external Audio/Video equipment (VCR, Set T op Box, DVD, etc.). Once this is setup, it allows your IR Mouse connector to control your equipment using your Hitachi TV Remote Control.
21 AV NETWORK SETUP WIZARD There are six steps in the setup procedure (DVD setup example below). 5. Follow the steps below to setup your A V network (See page 22 for A V Network Codes). 6. Enter “9999” to uninstall the equipment from your A V Network.
22 FIRST TIME USE AUDIO/VIDEO NETWORK (A/V NET) CODES VCR BRAND . . . . . . . . . . . . . . . . . . . . . . . . . . . CODE Admiral . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0048, 0209 Adventura . . . . . . . . . . . . . . . . . . . . . .
23 THE REMOTE CONTROL In addition to controlling all the functions on your HIT ACHI Projection TV , the new remote control is designed to operate different types of VCRs, CA TV (Cable TV) converters, set-top-box, satellite receiver , DVD players, and other audio/video equipment with one touch.
24 THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL YOUR TV POWER button Press this button to turn the TV set on or of f when the remote is in TV mode (see page 23 for instructions on how to set the r emote control to TV mode). TV button When the TV button is pressed, it will blink, to indicate the remote is in TV mode.
25 THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL YOUR TV C.C. button Press this button to quickly turn the Closed Caption feature on, off and auto.
HOW T O USE THE REMOTE T O CONTROL YOUR TV 26 THE REMOTE CONTROL AV NET button Press this button to access the Audio/Video network (A V Net) menu. The A V Net allows the user to control external components with the Projection TV’ s remote control.
HOW T O USE THE REMOTE T O CONTROL YOUR TV 27 THE REMOTE CONTROL Photo MC The Photo MC feature is useful for viewing digital still pictures from your digital camera using a memory card and displaying them on the TV screen. Insert Photo MC (memory card) to be viewed to a PC Card adapter .
HOW T O USE THE REMOTE T O CONTROL YOUR TV 28 THE REMOTE CONTROL 1/10 2/10 3/10 4/10 8/10 7/10 6/10 5/10 9/10 10/10 1/10 2/10 3/10 4/10 8/10 7/10 6/10 5/10 9/10 10/10 1/10 2/10 3/10 4/10 8/10 7/10 6/1.
HOW T O USE THE REMOTE T O CONTROL YOUR TV 29 THE REMOTE CONTROL Custom Set Top Box PV Recorder AV Receiver Move POWER SEL Select CH CH MENU TV/VCR INFO 123 456 7 0 9 8 THUMB STICK SELECT MORE.
HOW T O USE THE REMOTE CONTROL T O CONTROL YOUR TV 30 THE REMOTE CONTROL AV NET LEARNING WIZARD This function of the A V NET makes it more expandable because it allows the user to use equipment that is not supported by the pre-code library , listed on page 22.
HOW T O USE THE REMOTE CONTROL T O CONTROL YOUR TV 31 THE REMOTE CONTROL ASPECT button Press this button to quickly change the picture format ASPECT ratio. Depending on the input signal, the picture format ratio allows you to adjust the images through the following options.
32 HOW T O USE THE REMOTE T O CONTROL YOUR TV VIRTUAL HD button Press this button to toggle between 1080i and 540p. 540p and 1080i represent two ways to display the TV signal. • Progressive: The “p” in 540p tells you that the display is showing you the picture in the progressive format.
33 HOW T O USE THE REMOTE T O CONTROL YOUR TV LAST CHANNEL (LAST CH) button Use this button to select between the last two channels viewed (Good for watching two sporting events, etc.). PICTURE-IN-PICTURE buttons See separate section on pages 34~36 for a description.
34 34 PICTURE-IN-PICTURE (PIP) Use above connection to view VCR program as a sub-picture while viewing another program as main picture (ANT A, ANT B, V :1, V :2, V :3, or V :5). Y ou may also view the VCR program as a main picture while viewing another program as a sub-picture (ANT A, V :1, V :2, V :3, or V:5).
PICTURE-IN-PICTURE (PIP) 35 SPLIT MODE PICTURE-IN-PICTURE Split Mode PIP displays the main picture and sub-picture evenly on the screen. SW AP button (with PIP ON) Press this button to toggle between the Main and Sub picture which is highlighted with a green border around the picture.
36 PICTURE-IN-PICTURE (PIP) FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company , recording statistics for a sporting event, etc.
37 USING THE REMOTE T O CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. Y ou must first program the remote to match the remote system of your VCR (refer to page 44 for pre-codes).
38 USING THE REMOTE T O CONTROL CABLE BOX FUNCTIONS Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. Y ou must first program the remote to match the remote system of your cable box (refer to page 44).
39 USING THE REMOTE T O CONTROL SET -TOP-BOX/SA TELLITE RECEIVER FUNCTIONS Operating the precoded function for your set-top-box/satellite receiver . This remote is designed to operate different types of set-top-box/satellite systems.
40 USING THE REMOTE T O CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player . This remote is designed to operate different types of DVD players. Y ou must first program the remote to match the remote system of your DVD player (refer to page 44 for pre-codes).
USING THE REMOTE T O CONTROL PVR FUNCTIONS 41 THE REMOTE CONTROL Operating the precoded function for your PVR (Personal Video Recorder). This remote is designed to operate different types of PVRs. Y ou must first program the remote to match the remote system of your PVR (refer to page 44 for pre-codes).
42 THE REMOTE CONTROL USING YOUR REMOTE TO CONTROL ADDITIONAL AUDIO EQUIPMENT Operating the precoded function for your Audio component. This remote is designed to operate different types of Audio component. Y ou must first program the remote to match the remote system of your Audio component (refer to page 44 for pre-codes).
43 THE SIMPLE REMOTE CONTROL MUTE FAV C H SELECT VOL + CH - CH + A/V NET VOL - MENU ANT POWER EXIT POWER button Press Power button to turn the Projection TV ON or OFF .
44 VCR, CABLE, SA TELLITE, DVD and AUDIO/VIDEO CODES FOR REMOTE CONTROL VCR BRAND. . . . . . . . . . . . . . . . . CODE Adventura . . . . . . . . . . . . . . . . . . . . . . 01 Aiko. . . . . . . . . . . . . . . . . . . . . . . . . . . 09 Aiwa . . . . .
OSD 45 1. Press MENU on the remote control to display the different features on your HIT ACHI Projection TV . 2. Press the THUMB STICK to highlight a dif ferent feature. 3. Press EXIT on the remote control to quickly exit from a menu. 4. Press A/V Net on the remote control to access the A/V Net menu to control external components.
OSD 46 Picture Mode Select between the two picture modes; Day and Night. Contrast Adjust contrast. Brightness Adjust brightness. Color Adjust color . T int Adjust tint.
VIDEO 47 ON-SCREEN DISPLA Y MENU THUMB STICK SELECT Color Brightness Contrast Picture Mode Video Move SEL Select Color Temperature Sharpness Tint Reset Video Settings Edge Enhancement Setup Locks Aspect Audio Video Move SEL Sel Black Enhancement Ch.
VIDEO 48 ON-SCREEN DISPLA Y Use this function to change the contrast between black and white levels in the picture. Use the THUMB STICK or to highlight the function to be adjusted. Press down on THUMB STICK to select the function settings. Press the THUMB STICK or to adjust the function.
VIDEO 49 ON-SCREEN DISPLA Y This function allows you to Reset the Video Menu Settings of the present input and return it to the Day or Night conditions depending on the selected VIDEO mode. Use THUMB STICK to highlight functions. Press down on THUMB STICK to select Reset V ideo Settings.
VIDEO 50 ON-SCREEN DISPLA Y Use this function to adjust the percentage of Red, Green and Color according to the user ’s preference. Use TINT to adjust flesh tones so they appear natural.
51 ON-SCREEN DISPLA Y AUDIO Select AUDIO to adjust the TV to your preference and to improve the sound quality . Audio MENU THUMB STICK SELECT Sound Enhancement Balance Bass Treble Audio Move SEL Return Internal Speakers Audio Source Perfect Volume Auto Noise Cancel 50% Off On Locks Chan.
AUDIO 52 ON-SCREEN DISPLA Y Sound Enhancement The following surround settings will reproduce the “live” sound you would hear in concert halls, sports stadiums, movie theaters, etc.
53 ON-SCREEN DISPLA Y ASPECT MODE Aspect Mode Auto Aspect Automatically adjust the Aspect Ratio depending on the input signal to fill the screen. Press THUMB STICK , , to select menu item. Press down on THUMBSTICK to select. A “ ” in the box indicates that the feature is ON.
54 ON-SCREEN DISPLA Y CHANNEL MANAGER Select ANTENNA if you are using an indoor or outdoor antenna. Select Cable if you have cable TV . Use THUMB STICK , to highlight the correct Channel Source. Press the THUMB STICK to select highlighted source.
CHANNEL MANAGER 55 ON-SCREEN DISPLA Y This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip unused channels when using CHANNEL UP ( ) or DOWN ( ). If the EXIT button is pressed while AUT O CHANNEL SCAN f un ction is engaged, programming will stop.
CHANNEL MANAGER 56 ON-SCREEN DISPLA Y Press THUMB STICK or to review more channels. Press EXIT to quit the menu. THUMB STICK SELECT Move SEL Return Ch# Scan CH ID Lock 2 Off -------- 3 Off -------- 4 Off -------- 5 Off -------- 6 Off -------- 7 Off -------- 8 Off -------- 9 Off -------- Chan.
57 ON-SCREEN DISPLA Y CHANNEL MANAGER This section contains advanced features which will make TV viewing easier and more enjoyable. Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 chan- nels a name when CA TV signal source is selected.
LOCKS 58 ON-SCREEN DISPLA Y This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed for a scheduled time period that you set. The code to enter the Locks feature is a four digit secret code number .
LOCKS 59 ON-SCREEN DISPLA Y Use MOVIE RA TINGS to prevent viewing of any movie that you feel may be inappropriate due to its content. Use THUMB STICK or to select the MOVIE RA TING category that you want to block. Press SELECT to block the MOVIE RA TING that you have selected.
LOCKS 60 ON-SCREEN DISPLA Y TV Ratings THUMB STICK SELECT Locks Move SEL Return TV Ratings Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Status TV Ratings Move SEL Select Canadian Ra.
LOCKS 61 ON-SCREEN DISPLA Y Canadian Ratings (Eng) THUMB STICK SELECT Locks Move SEL Return Canadian Ratings (Eng) Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Status TV Ratings Mov.
62 ON-SCREEN DISPLA Y LOCKS Canadian Ratings (Frn) THUMB STICK SELECT Locks Move SEL Return Canadian Ratings (Frn) Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Status TV Ratings Mov.
SETUP 63 ON-SCREEN DISPLA Y Select SETUP when setting your TV up for the first time. Use the THUMB STICK or on the remote to highlight the function desired.
SETUP 64 ON-SCREEN DISPLA Y MAGIC FOCUS MAGIC FOCUS Auto Digital Convergence Adjustment Please turn ON your television for at least 20 minutes before using this feature. The Magic Focus button on control panel will not work when adjustment mode is set to Manual (see page 65).
SETUP 65 ON-SCREEN DISPLA Y NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature. 2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode. DO NOT press MAGIC FOCUS or use Auto Adjustment Mode after using Manual Adjustment Mode.
SETUP 66 ON-SCREEN DISPLA Y This feature will allow you to select any one of three different languages for all on-screen displays. Use THUMB STICK , to highlight the language of your choice. Press SELECT to select the highlighted language. Press EXIT to quit menu or select MENU PREFERENCE to return to previous menu.
SETUP 67 ON-SCREEN DISPLA Y The clock must be adjusted before you can use the “Set Event T imer” or “TV Time Out” features. Use THUMB STICK or to set the time and date. Press THUMB STICK or to change position. Press EXIT to quit menu.
SETUP 68 ON-SCREEN DISPLA Y Use this feature to give a name to any of the five video inputs. Press THUMB STICK , , , , to highlight the name of the video inputs. Press down on THUMB STICK to select desired input name. Select RESET to set video names to original factory preset condition.
SETUP 69 ON-SCREEN DISPLA Y Set The Color System Set Virtual HD Set Black Side Panel This function allows you to automatically change tint and color coordinates for DTV programs. HDTV - High Definition T elevision - Use for High Vision Signal Y -P B P R from HDTV Set-T op Box.
SETUP 70 ON-SCREEN DISPLA Y This function will automatically turn the Projection TV on and of f, one time only , every day , or once a week. Use THUMB STICK , to highlight Event 1, 2 or 3 and then press THUMBSTICK to select. Use THUMB STICK to change position of On time, Off time, Antenna, Channel, and On/Off Frequency .
SETUP 71 ON-SCREEN DISPLA Y Caption Display: On/Off will turn the display on or of f. Auto will turn the display on when Mute/Soft Mute is on. Caption Mode: Captions is for the program you are viewing. T ext is for additional information such as news reports or a TV program guide.
72 CARE OF YOUR HIT ACHI TELEVISION AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty .
73 RECEPTION PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. • GHOSTS: Ghosts are caused by the television signal following two paths.
USEFUL INFO 74 HIT ACHI Projection T elevision incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR T O HA VE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1.
USEFUL INFO 75 •V elocity Modulation • Six Aspect Modes • Closed Caption Decoder • 2-T uner Picture in Picture • Magic Focus (Auto Digital Convergence and Manual Adjustment) • Dual Antenna Inputs •V ideo Input Sensor •3 Dimensional Y/C Comb Filter • Full 1080i HDTV capable when used with a Set-T op Box.
USEFUL INFO 76 Hitachi America, L TD. Home Electronics Division 900 Hitachi W ay Chula Vista, CA 91914-3556 Hitachi America, L TD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit.
USEFUL INFO 77 In Canada: 1-800-HIT ACHI (1-800-448-2244) Monday - Friday EST 9:00am - 7:00pm Saturday EST 9:00am - 5:00pm Hitachi Canada, L TD. Digital Media Division Should you have any questions regarding warranty, service, operation, or technical assistance, please contact: Look for your French Manual on the outside of the box.
78 INDEX A Accessories, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Antennas (Connecting), . . . . . . . . . . . . . . . . . . . . .5, 6 Aspect Ratio, . . . . . . . . . . . . . . . . . . . . . . . . . . .31, 53 Audio (Sound Enhancement) SRS .
79 NOTES.
QR57061.
Ein wichtiger Punkt beim Kauf des Geräts Hitachi 65T500A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hitachi 65T500A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hitachi 65T500A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hitachi 65T500A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hitachi 65T500A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hitachi 65T500A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hitachi 65T500A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hitachi 65T500A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hitachi 65T500A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
