Benutzeranleitung / Produktwartung 53SWX01W, 61SWX01W des Produzenten Hitachi
Zur Seite of 76
PROJECTION COLOR TV 53SWX01W 61SWX01W OPERA TING GUIDE IMPORT ANT SAFEGUARDS 2-4 FIRST TIME USE 5-24 THE GENIUS REMOTE CONTROL UL TRA TEC BIT -MAP ON-SCREEN DISPLA Y USEFUL INFORMA TION INDEX 69-72 38.
2 IMPORT ANT Follow all warnings and instructions marked on this projection television. W ARNING RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAFETY TIPS 3 1. This television set is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other .) This plug will fit into the power outlet only one way . This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
SAFETY TIPS 4 PICTURE CAUTIONS Picture Burn Prevention ¥ Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (non-moving) patterns can cause permanent damage to projection television receivers.
ACCESSORIES 5 POWER TV VCR CBL AV2 AV1 AV 3 SAT DVD 1 2 4 56 3 7 89 0 LAST CH SLEEP INPUT HELP C.S. E X IT MENU CH VOL R EC A LL M UTE GUIDE/TV GUIDE/TV GUIDE/TV INFO VCR PLUS+ SVCS GUIDE/TV SCHD PIP PIP CH SWAP FREEZE PIP MODE PIP ACCESS PROG TV/VCR SLOW SOURCE WIZARD REC SELECT C.
HOW T O SET UP YOUR NEW HIT ACHI PROJECTION TV 6 CAUTION: Magnetic fields, such as those of external speakers, may cause the picture to distort if they are placed too close to the television. Move the magnetic field source away from the television until there is no picture distortion.
HOOK-UP CABLES AND CONNECT ORS 7 Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products.
FRONT P ANEL CONTROLS 8 NOTES: 1. Y our HIT ACHI Projection TV will appear to be turned OFF if there is no video input when VIDEO: 1, 2 or 3 is selected.
FRONT P ANEL CONTROLS 9 POWER light Y ou will see a red light when the TV is turned on. AI (Artificial Intelligence) sensor The Artificial Intelligence sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture.
FRONT P ANEL JACKS AND CONNECTIONS 10 The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: NOTES: 1. Completely insert connection cord plugs when connecting to front panel jacks.
REAR P ANEL JACKS 11 Antenna Input/Output The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture.
REAR P ANEL JACKS 12 Component: Y -P B P R Inputs Inputs 1 and 2 provide Y -P B P R jacks for connecting equipment with this capability , such as a DVD player or Set T op Box. NOTES: 1. DO NOT connect standard VIDEO or S-VIDEO to Input 1 or 2 when using Y -P B P R input.
STOP CONNECT ONLY 8 OHM SPEAKERS DO NOT SHORT CIRCUIT THESE TERMINALS (Such damage is NOT COVERED by your television warranty) P B P R P B P R L REAR SPEAKER 8 W ONLY R DVD Player Stereo System Amplifier Laserdisc player , VCR, camcorder , etc.
14 REAR SPEAKER TERMINAL CONNECTIONS CONNECT AFTER TURNING THE POWER OF THE TV OFF . Push in the Right Speaker button and insert the positive (+) lead wire into the hole next to the button. Once the wire is in place, pull the red button back to original position and the wire is locked into place.
TIPS ON REAR P ANEL CONNECTIONS 15 TIPS ON REAR P ANEL CONNECTIONS S-VIDEO connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature.
16 CONNECTING EXTERNAL AUDIO SOURCES STOP CONNECT ONL Y 8 OHM SPEAKERS DO NOT SHORT CIRCUIT THESE TERMINALS (Such damage is NOT COVERED by your television warranty) P B P R P B P R L REAR SPEAKER 8 .
CONNECTING EXTERNAL VIDEO SOURCES 17 The exact arrangement you use to connect the VCR, camcorder , laserdisc player , DVD player , or HDTV Set T op Box to your TV set is dependent on the model and features of each component. Check the owner ’s manual of each component for the location of video and audio inputs and outputs.
CONNECTING EXTERNAL VIDEO SOURCES 18 CONNECTING A STEREO VCR OR STEREO LASERDISC PLA YER 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
CONNECTING EXTERNAL VIDEO SOURCES 19 CONNECTING AN S-VIDEO VCR OR LASERDISC PLA YER 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
CONNECTING EXTERNAL VIDEO SOURCES 20 CONNECTING A STEREO LASERDISC/DVD PLA YER OR HDTV SET TOP BOX T O INPUT 1 OR 2 COMPONENT : Y -P B P R . 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below .
CONNECTING EXTERNAL VIDEO SOURCES 21 CONNECTING A DVD OR HDTV SET T OP BOX PLA YER WITH DOLBY DIGIT AL OPTICAL OUTPUT TO INPUT 1 or 2 COMPONENT : Y -P B P R 1. Connect the cable from the Y OUT of the DVD player or HDTV Set T op Box to the INPUT (Y) jack, as shown on the TV set below .
CONNECTING EXTERNAL VIDEO SOURCES 22 CONNECTING A DVD OR HDTV SET T OP BOX PLA YER WITH DOLBY DIGIT AL COAXIAL OUTPUT TO INPUT COMPONENT : Y -P B P R 1. Connect the cable from the Y OUT of the DVD player or HDTV Set T op Box to the INPUT (Y) jack, as shown on the TV set below .
23 AUDIO SYSTEM SETUP Match the numbers below to the diagrams for speaker placement and refer to the table on page 24 for the different surround sound requirements.
AUDIO SYSTEM SETUP 24 SURROUND REQUIRED OPTIONAL EFFECT FEA TURE CONNECTION CONNECTION OFF Receive mono and stereo sound. ST ADIUM Listener has feeling of being at a stadium. ROCK ARENA Listener has feeling of being at a rock concert.
THE GENIUS REMOTE CONTROL 25 In addition to controlling all the functions on your HIT ACHI Projection TV , the new remote control is designed to operate different types of VCRs, CA TV (Cable TV) converters, satellite receivers, DVD players, and other audio/video equipment with one touch.
HOW T O USE THE GENIUS REMOTE TO CONTROL YOUR TV 26 POWER button Press this button to turn the TV set on or of f when the remote is in TV mode. TV button When the TV button is pressed, it will blink, to indicate the remote is in TV mode. VCR button When the VCR button is pressed, it will blink to indicate the remote is in VCR mode.
HOW T O USE THE GENIUS REMOTE TO CONTROL YOUR TV 27 A V1, A V2, A V3 buttons When pressed, each of these buttons will blink to indicate the remote is in Audio/Video mode. (see page 36) SLEEP button Press this button to display the sleep timer in the lower left corner of the screen.
HOW T O USE THE GENIUS REMOTE TO CONTROL YOUR TV 28 ASPECT button Press this button to quickly change the aspect ratio of the viewable picture in normal, full, fill, and smooth wide. (See page 48 and 49 for more information) COMMERCIAL SKIP (C.
PICTURE-IN-PICTURE (PIP) 29 NOTES: 1. Y -P B P R input cannot be viewed as main picture or sub-picture when in SINGLE PIP MODE. If you tune to a Y -P B P R input, the TV set will automatically change to SPLIT PIP MODE. 2. When ANT B is selected as the main channel, the SW AP feature is disabled.
PICTURE-IN-PICTURE (PIP) 30 NOTES: 1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory . (see pages 43 and 44) 2. If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.
PICTURE-IN-PICTURE (PIP) 31 FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company , recording statistics for a sporting event, etc.
USING THE REMOTE T O CONTROL VCR FUNCTIONS 32 Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. Y ou must first program the remote to match the remote system of your VCR. (refer to page 37 for pre-codes) 1.
USING THE REMOTE T O CONTROL CABLE BOX FUNCTIONS 33 Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. Y ou must first program the remote to match the remote system of your cable box.
USING THE REMOTE T O CONTROL SA TELLITE RECEIVER FUNCTIONS 34 Operating the precoded function for your satellite receiver . This remote is designed to operate different types of satellite systems. Y ou must first program the remote to match the remote system of your satellite receiver .
USING THE REMOTE T O CONTROL DVD FUNCTIONS 35 Operating the precoded function for your DVD player . This remote is designed to operate different types of DVD players. Y ou must first program the remote to match the remote system of your DVD player . (refer to page 37 for pre-codes) 1.
USING THE REMOTE T O CONTROL ADDITIONAL AUDIO/VIDEO EQUIPMENT 36 Operating the precoded function for your Audio/Video component. This remote is designed to operate different types of Audio/Video component. Y ou must first program the remote to match the remote system of your Audio/Video component.
37 VCR BRAND . . . . . . . . . . . . . CODE Adventura . . . . . . . . . . . . . . . . . . 01 Aiko . . . . . . . . . . . . . . . . . . . . . . . 09 Aiwa . . . . . . . . . . . . . . . . . . . . . . 01 Akai . . . . . . . . . . . . . . . . . 02, 47, 48 American High .
UL TRA TEC OSD 38 SETUP CUSTOMIZE VIDEO AUDIO THEATER 1. Press MENU on the remote control to display the different features on your HIT ACHI Projection TV . 2. Press the THUMB STICK to highlight a dif ferent feature. 3. Press EXIT on the remote control to quickly exit from a menu.
UL TRA TEC OSD 39 SETUP CUSTOMIZE VIDEO AUDIO THEATER SET UP 1. MENU LANGUAGE Choose English, French, or Spanish text. 2. PLUG & PLA Y Optimum hook up for your system. 3. SIGNAL SOURCE Select Antenna or Cable TV . 4. AUT O CHANNEL SET First time set up for channel buttons.
SET UP 40 SET UP Select SETUP when setting your TV up for the first time. Use the THUMB STICK or on the remote to highlight the function desired. NOTE: To see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER button on the TV set for approximately five seconds.
SET UP 41 SET UP This graphic guide function will help you to properly set up your TV or Home Theater System. Simply answer three questions and a graphic will be displayed, showing you the optimum setup for your personalized system. Press THUMB STICK or to highlight the correct answers to all three questions.
SET UP 42 SET UP Select ANTENNA if you are using an indoor or outdoor antenna. Select CA TV if you have cable TV . Press THUMB STICK or to highlight and select the correct SIGNAL SOURCE mode. Press EXIT to quit MENU or THUMB STICK to return to previous menu.
SET UP 43 SET UP This feature will automatically store active TV channels in CHANNEL MEMORY . This will allow you to skip unused channels when using CHANNEL UP ( ) or DOWN ( ). If the EXIT button is pressed while the AUTO CHANNEL SET function is engaged, programming will stop.
SET UP 44 SET UP Use this function after AUTO CHANNEL SET to add or erase additional channels to the remote control CHANNEL or buttons. Add or erase additional channels while still in CHANNEL MEMORY using CHANNEL or or the number buttons to change the channel.
SET UP 45 SET UP This function allows you to review which channels are labeled in CHANNEL ID (ID.), which have been added to CHANNEL MEMOR Y (SCAN), and which are protected by P ARENT AL CONTROL (LOCK). Press THUMB STICK or to review more channels.
SET UP 46 SET UP The time must be set before you can use the 4 EVENT PROGRAM or TV TIME OUT . Use THUMB STICK or to set the time, date, and year . Press THUMB STICK or to change position. Press EXIT to quit menu or THUMB STICK to return to previous menu when the CURSOR is in the first position.
SET UP 47 SET UP Y our HIT ACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color . T o produce these colors, however , the beams must be precisely aligned over each other so that the colors can be mixed.
SET UP 48 SET UP The PICTURE FORMA TS function is very useful when setting up reception of High Definition, Standard Definition and NTSC signals. Press THUMB STICK or to highlight then press down on THUMB STICK to select Aspect Style (normal, full, fill, smooth wide) Press EXIT to quit menu or THUMB STICK to return to previous menu.
SET UP 49 SET UP V. POSITION Adjust this when viewing a COMPONENT : Y -P B P R signal. This feature is used to center an HDTV video signal between the top and bottom gray bars. Adjustable range is -10(video center is toward bottom of screen) to +10(video center is toward top of screen).
CUST OMIZE 50 CUSTOMIZE CUSTOMIZE This selection contains advanced features which will make TV viewing easier and more enjoyable. Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 channels a name when CA TV signal source is selected.
CUST OMIZE 51 CUSTOMIZE Use this feature to give a name to any of the three video inputs. Press THUMB STICK to highlight VIDEO LIST . Press THUMB STICK to select preset VIDEO LIST . Press THUMB STICK or to scroll through the preset VIDEO LIST .
CUST OMIZE 52 CUSTOMIZE This function allows you to group your favorite channels into six personalized categories that you can rename. A total of 36 channels can be stored in the F AMIL Y F A VORITES function. Channel stored with AUTO CHANNEL SET will automatically be stored in F AMIL Y F A VORITES.
CUST OMIZE 53 CUSTOMIZE Use this function to display F AMIL Y F A VORITES selections as sub-pictures or to tune the main picture to a desired favorite channel. Select a category using THUMB STICK or . Press MENU and the category will be displayed as sub-pictures at the right edge of the screen.
CUST OMIZE 54 CUSTOMIZE This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed for a scheduled amount of time that you set. The code to enter P ARENT AL CONTROL is a four digit secret code number .
CUST OMIZE 55 CUSTOMIZE This function will automatically turn the TV on and of f, one time only , every day , or once a week. Press THUMB STICK to select PROGRAM 1, 2, 3, or 4. Press THUMB STICK or to select the time the TV will turn on and off.
CUST OMIZE 56 CUSTOMIZE Use this function to automatically turn the TV on and tune to VIDEO: 1, 2 or 3 when it detects a VIDEO input. Use THUMB STICK to select Video Input. Use THUMB STICK or , then press down (SELECT) on THUMB STICK to change AUTO LINK setting.
CUST OMIZE 57 CUSTOMIZE DISPLA Y : ON/OFF will turn the display on or off. MODE: C.C. (Closed Caption) is for the program you are viewing. TEXT is for additional information such as news reports or a TV program guide. This information covers the entire screen and viewing the TV program is not possible.
CUST OMIZE 58 CUSTOMIZE FIRST TIME TOUR This function introduces you to the First T ime T our Setup Feature, showing you basic TV functions as well as helping you set up your TV or Home Theater System. This feature will be displayed every time your TV is turned on, unless you set FIRST TIME TOUR to OFF .
VIDEO 59 VIDEO VIDEO Select VIDEO to adjust picture settings and improve picture quality . Use this function to change the contrast between black and white levels in the picture. This adjustment will only affect the picture when ADV ANCED SETTINGS UL TRA AI is OFF .
VIDEO 60 VIDEO Y our HIT ACHI Projection TV has an Ultra AI (Artificial Intelligence) function which will automatically adjust picture settings to produce the highest quality picture possible. When AI is highlighted, press down on THUMB STICK to turn the AI on or off.
AUDIO 61 AUDIO Select AUDIO to adjust the TV to your preference and to improve the sound quality . Use THUMB STICK or to highlight the function to be adjusted. When EQUALIZER is highlighted, press THUMB STICK to select the frequency you would like to adjust (60, 250, 1K, 3K or 10K).
AUDIO 62 AUDIO Use ADV ANCED SETTINGS to improve the sound performance of your TV , depending on listening conditions. MTS MODE Multi-Channel T elevision Sound will allow you to select STEREO (a stere.
THEA TER 63 AUDIO Use THUMB STICK or to change THEA TER MODES settings. When TV mode is chosen, the following are automatically set: CONTRAST - 83%, COLOR TEMPERA TURE - COOL, EQUALIZER is set.
THEA TER 64 THEATER SURROUND The following surround settings will reproduce the live sound you would hear in concert halls, sports stadiums, movie theaters, etc. when you set up your speaker system as shown in the section on audio system setup on pages 23-24.
THEA TER 65 AUDIO DOLBY PRO LOGIC Dolby Pro Logic provides four separate sound channels: front left, center , front right, and surround. For properly encoded programs marked the center sound channel contains the dialogue for the program viewed. The left and right channels produce sound effects that will match the action on the TV screen.
THEA TER 66 THEATER DOLBY DIGIT AL Dolby Digital provides six independent sound channels: front left, center , front right, surround left, surround right, and sub woofer .
THEA TER 67 AUDIO Use THUMB STICK or to select DIGIT AL or ANALOG. Press EXIT to quit menu or THUMB STICK to return to previous menu. Set audio input to Digital or Analog. This fueature is used only when viewing VIDEO:1 or VIDEO:2 inputs, since only these inputs can accept DIGIT AL audio input.
THEA TER 68 THEATER Use THUMB STICK or to select ST ANDARD, NIGHT , MAXIMUM. Press EXIT to quit menu or THUMB STICK to return to previous menu. When ST ANDARD is selected: It is the normal listening mode. It does not make full use of your televisions dynamic range, but is a good compromise for all day viewing/listening.
THEA TER 69 AUDIO SPEAKER SETUP Select specific speaker output, including a subwoofer . Press THUMB STICK or to highlight feature. Press down on THUMB STICK to select INTERNAL or EXTERNAL W/AMP . Use THUMB STICK to change SURROUND or SUB WOOFER feature to your desired setting.
70 CARE OF YOUR HIT ACHI PROJECTION TV AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty .
71 RECEPTION PROBLEMS ¥ IGNITION NOISE: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. ¥ GHOSTS: Ghosts are caused by the television signal following two paths.
USEFUL INFO 72 HIT ACHI Projection T elevision incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR T O HA VE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1.
USEFUL INFO 73 Features: ¥ Superfine Picture Quality 1000 Line Horizontal Resolution ¥ Pure Green and Red Filter Lenses ¥ Artificial Intelligence System ¥ Remote (Controls many VCR brands, cable boxes, satellite boxes, and other audio equipment.
USEFUL INFO 74 Hitachi America, L TD. Home Electronics Division 1855 Dornoch Court San Diego, CA 92154 Hitachi America, L TD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit.
75 NOTES:.
QR45522.
Ein wichtiger Punkt beim Kauf des Geräts Hitachi 53SWX01W, 61SWX01W (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hitachi 53SWX01W, 61SWX01W noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hitachi 53SWX01W, 61SWX01W - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hitachi 53SWX01W, 61SWX01W reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hitachi 53SWX01W, 61SWX01W erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hitachi 53SWX01W, 61SWX01W besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hitachi 53SWX01W, 61SWX01W verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hitachi 53SWX01W, 61SWX01W. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hitachi 53SWX01W, 61SWX01W gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
