Benutzeranleitung / Produktwartung 53SBX10B des Produzenten Hitachi
Zur Seite of 60
PROJECTION COLOR TV 53SBX10B OPERA TING GUIDE IMPORT ANT SAFEGUARDS 2-3 FIRST TIME USE 4-18 THE GENIUS REMOTE CONTROL UL TRA TEC BIT -MAP ON-SCREEN DISPLA Y USEFUL INFORMA TION INDEX 55-59 32-54 19-31 CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL As an E NERGY S TA R ¤ Partner , Hitachi, Ltd.
IMPORT ANT SAFETY INSTRUCTIONS 2 SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HIT ACHI TELEVISION Our reputation has been built on the quality , performance, and ease of service of HIT ACHI televisions. Safety is also foremost in our minds in the design of these units.
IMPORT ANT SAFETY INSTRUCTIONS 3 Read before operating equipment Follow all warnings and instructions marked on this television. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
ACCESSORIES 4 1. Remote Control Unit CLU-5712TSI (Part No. HL01642), or Remote Control Unit CLU-5714TSI (Part No. HL01644). 2. T wo AA size, 1.5V batteries (For Remote Control Unit).
HOW T O SET UP YOUR NEW HIT ACHI PROJECTION TV 5 CAUTION: Magnetic fields, such as those of external speakers, may cause the picture to distort if they are placed too close to the television. Move the magnetic field source away from the television until there is no picture distortion.
HOOK-UP CABLES AND CONNECT ORS 6 Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products.
FRONT P ANEL CONTROLS 7 NOTES: 1. Y our HIT ACHI Projection TV will appear to be turned OFF if there is no video input when VIDEO: 1, 2, 3 or 4 is selected.
FRONT P ANEL CONTROLS 8 POWER light Y ou will see a red light when the TV is turned on. PERFECT PICTURE sensor The Perfect Picture sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture.
FRONT P ANEL JACKS AND CONNECTIONS 9 The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks.
REAR P ANEL JACKS 10 Antenna Input/Output The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture.
REAR P ANEL JACKS 11 NOTES: 1. Y our component outputs may be labeled Y , B-Y , and R-Y . In this case, connect the components B-Y output to the T V s P B input and the components R-Y output to the TV s P R input. 2. Y our component outputs may be labeled Y -C B C R .
REAR P ANEL CONNECTIONS 12 DVD Player Stereo System Amplifier Laserdisc player , VCR, camcorder , etc. VCR #2 Cable TV Box Optional, see tips on page 13 VCR #1 Outside antenna or cable TV coaxial cabl.
TIPS ON REAR P ANEL CONNECTIONS 13 TIPS ON REAR P ANEL CONNECTIONS S-VIDEO connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature.
CONNECTING EXTERNAL AUDIO SOURCES 14 P B P R AUDIO TO HI-FI RL INPUT Stereo System Amplifier To Audio Input Terminal of External Amplifier MONITOR OUT INPUT 1 AUDIO (MONO) L R AUDIO L R S-VIDEO S-VIDE.
CONNECTING EXTERNAL VIDEO SOURCES 15 The exact arrangement you use to connect the VCR, camcorder , laserdisc player or DVD player to your TV set is dependent on the model and features of each component. Check the owner ’s manual of each component for the location of video and audio inputs an d outputs.
CONNECTING EXTERNAL VIDEO SOURCES 16 CONNECTING A STEREO SOURCE TO INPUT1~INPUT4 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
CONNECTING EXTERNAL VIDEO SOURCES 17 CONNECTING AN S-VIDEO SOURCE TO INPUT 1, 2, AND 3 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
CONNECTING EXTERNAL VIDEO SOURCES 18 CONNECTING A COMPONENT SOURCE TO VIDEO 4: Y -P B P R . 1. Connect the cable from the Y OUT of the Laserdisc/DVD player to the INPUT (Y) jack, as shown on the TV set below . 2. Connect the cable from the C B /P B OUT or B-Y OUT of the Laserdisc/DVD player to the INPUT (P B) jack.
19 THE GENIUS REMOTE CONTROL In addition to controlling all the functions on your HIT ACHI Projection TV , the new remote control is designed to operate different types of VCRs, CA TV (Cable TV) converters, satellite receivers, DVD players, and other audio/video equipment with one touch.
20 HOW T O USE THE GENIUS REMOTE TO CONTROL YOUR TV POWER button Press this button to turn the TV set on or of f when the remote is in TV mode. TV button When the TV button is pressed, it will blink, to indicate the remote is in TV mode. VCR button When the VCR button is pressed, it will blink to indicate the remote is in VCR mode.
21 HOW T O USE THE GENIUS REMOTE TO CONTROL YOUR TV SLEEP button Press this button to display the sleep timer in the lower left corner of the screen. Every subsequent press of this button will add 15 minutes to this timer , up to a maximum of three hours.
THUMB STICK/SELECT button All the On-Screen Display features can be set or adjusted by using the THUMB STICK. The THUMB STICK will highlight functions or adjust and set dif ferent features. Press the THUMB STICK toward desired direction and press down to SELECT.
23 PICTURE-IN-PICTURE (PIP) NOTES: 1. When using Y -P B P R input, only 480i signal can be viewed as a sub-picture 2. When ANT B is selected as the main channel, the SW AP feature is disabled.
24 PICTURE-IN-PICTURE (PIP) NOTES: 1. The SW AP button will only operate when SINGLE PIP mode is chosen. 2. The SW AP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as a sub-picture.) PICTURE-IN-PICTURE CONT .
25 PICTURE-IN-PICTURE (PIP) FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company , recording statistics for a sporting event, etc.
26 USING THE REMOTE T O CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. Y ou must first program the remote to match the remote system of your VCR. (refer to page 31 for pre-codes) 1.
USING THE REMOTE T O CONTROL CABLE BOX FUNCTIONS 27 Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. Y ou must first program the remote to match the remote system of your cable box.
28 USING THE REMOTE T O CONTROL SET -T OP-BOX/SA TELLITE RECEIVER FUNCTIONS Operating the precoded function for your set-top-box/satellite receiver . This remote is designed to operate different types of set-top-box/satellite systems. Y ou must first program the remote to match the remote system of your set-top-box/satellite receiver .
29 USING THE REMOTE T O CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player . This remote is designed to operate different types of DVD players. Y ou must first program the remote to match the remote system of your DVD player . (refer to page 31 for pre-codes) 1.
USING THE REMOTE TO CONTROL ADDITIONAL AUDIO/VIDEO EQUIPMENT 30 Operating the precoded function for your Audio/Video component. This remote is designed to operate different types of Audio/Video component. Y ou must first program the remote to match the remote system of your Audio/Video component.
VCR, CABLE, SA TELLITE, DVD and AUDIO/VIDEO CODES 31 VCR BRAND. . . . . . . . . . . . . . . . . CODE Adventura . . . . . . . . . . . . . . . . . . . . . . 01 Aiko. . . . . . . . . . . . . . . . . . . . . . . . . . . 09 Aiwa . . . . . . . . . . . . . .
UL TRA TEC OSD 32 CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL 1. Press MENU on the remote control to display the different features on your HIT ACHI Projection TV . 2. Press the THUMB STICK to highlight a dif ferent feature. 3. Press EXIT on the remote control to quickly exit from a menu.
UL TRA TEC OSD 33 CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL Menu Language Choose English, French, or Spanish text. Signal Source Select Antenna or Cable TV . Auto Channel Set First time set up for channel buttons. Channel Memory Channel buttons, add, skip.
SET UP 34 SETUP Select SETUP when setting your TV up for the first time. Use the CURSOR or on the remote to highlight the function desired. NOTE: To see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER button on the TV set for approximately five seconds.
SET UP 35 SETUP Select ANTENNA if you are using an indoor or outdoor antenna. Select CA TV if you have cable TV . Press THUMB STICK or to highlight the signal source and press down on THUMB STICK to select the correct SIGNAL SOURCE mode. Press EXIT to quit MENU or THUMB STICK to return to previous menu.
SET UP 36 SETUP This feature will automatically store active TV channels in CHANNEL MEMORY . This will allow you to skip unused channels when using CHANNEL UP ( ) or DOWN ( ). If the EXIT button is pressed while the AUTO CHANNEL SET function is engaged, programming will stop.
SET UP 37 SETUP Use this function after AUTO CHANNEL SET to add or erase additional channels to the remote control CHANNEL or buttons. To add or erase additional channels while still in CHANNEL MEMORY use CHANNEL or , or the number buttons to change the channel.
SET UP 38 SETUP This function allows you to review which channels are labeled in CHANNEL ID (ID.), which have been added to CHANNEL MEMORY (SCAN), and which are protected by P ARENT AL CONTROL (LOCK). Press THUMB STICK or to review more channels.
SET UP 39 SETUP The time must be set before you can use the 4 EVENT PROGRAM or TV TIME OUT . Use THUMB STICK or to set the time, date, and year . Press THUMB STICK or to change position. Press EXIT to quit menu or THUMB STICK to return to previous menu when the CURSOR is in the first position.
SET UP 40 SETUP Please turn on your television for at least 20 minutes before using this feature. Y our HIT ACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color .
CUST OM 41 CUSTOMIZE CUSTOMIZE This selection contains advanced features which will make TV viewing easier and more enjoyable. Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 channels a name when CA TV1 signal source is selected.
CUST OM 42 CUSTOMIZE Use this feature to give a name to any of the four video inputs. Press THUMB STICK to select VIDEO LIST. Press THUMB STICK to select preset VIDEO LIST. Press THUMB STICK or to scroll through the preset VIDEO LIST. Press down on THUMB STICK to select desired VIDEO ID.
CUST OM 43 CUSTOMIZE This function allows you to group your favorite channels into six personalized categories that you can rename. A total of 24 channels can be stored in the F AMIL Y F A VORITES function. To rename the categories, use the THUMB STICK to highlight the category you would like to rename.
CUST OM 44 CUSTOMIZE Use this function to display F AMIL Y F A VORITES selection to tune the main picture to a desired favorite chan- nel. Select a category using THUMB STICK or buttons. Press MENU and the category will be displayed as sub-pictures at the right edge of the screen.
CUST OM 45 CUSTOMIZE This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed for a scheduled amount of time that you set. The code to enter P ARENT AL CONTROL is a four digit secret code number .
CUST OM 46 CUSTOMIZE This function will automatically turn the TV on and of f, one time only , every day or once a week. Press THUMB STICK then press SELECT to select PROGRAM 1, 2, 3, or 4. Press THUMB STICK or to select the time the TV will turn on and off.
CUST OM 47 CUSTOMIZE Use this function to automatically turn the TV on and tune to VIDEO: 4 when it detects a VIDEO input. Use THUMB STICK or , then press down on THUMB STICK, to change AUTO LINK setting. When AUTO is selected, the TV will turn on and tune to VIDEO: 4 automatically , when the VIDEO: 4 input device is turned on.
CUST OM 48 CUSTOMIZE DISPLA Y : ON/OFF will turn the display on or off. AUTO will display closed captions when audio is muted. MODE: C.C. (Closed Caption) is for the program you are viewing. TEXT is for additional information such as news reports or a TV program guide.
49 VIDEO VIDEO VIDEO Select VIDEO to adjust picture settings and improve picture quality . Use this function to change the contrast between black and white levels in the picture. This adjustment will only affect the picture when ADV ANCED SETTINGS PERFECT PICTURE is OFF .
50 VIDEO VIDEO Y our HIT ACHI Projection TV has a PERFECT PICTURE function which will automatically adjust picture settings to produce the highest quality picture possible. When PERFECT PICTURE is highlighted, press SELECT to turn the PERFECT PICTURE on or of f.
AUDIO AUDIO 51 Select AUDIO SETTINGS to adjust the TV to your preference and to improve the sound quality . This function controls the low frequency audio to all speakers. Use THUMB STICK or to highlight the function to be adjusted. Press THUMB STICK or to adjust the function.
AUDIO 52 AUDIO Use ADV ANCED SETTINGS to improve the sound performance of your TV , depending on listening conditions. MTS MODE Multi-Channel T elevision Sound will allow you to select STEREO (a stere.
53 THEA TER THEA TER THEA TER Use THUMB STICK or to highlight THEA TER MODES function. Press down on THUMB STICK to change THEA TER MODES function. When TV mode is chosen, the following are automatically set: CONTRAST-74%, AUTO COLOR-ON, COLOR TEMP.
THEA TER 54 THEA TER Surround The following surround settings will reproduce the live sound you would hear in concert halls, sports stadiums, movie theaters, etc. with only two speakers. To enter the SURROUND MODE, use THUMB STICK or to highlight then press down on THUMB STICK to select SURROUND MODE of your choice.
CARE OF YOUR HIT ACHI PROJECTION TV AND YOUR REMOTE CONTROL 55 DO Dust the screen and cabinet with a soft cloth. Clean the screen with a dry cloth. Place your television away from extreme heat, humidity , and extremely dusty places.
RECEPTION PROBLEMS 56 ¥ IGNITION NOISE: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. ¥ GHOSTS: Ghosts are caused by the television signal following two paths.
USEFUL INFO 57 HIT ACHI Projection T elevision incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR T O HA VE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1.
58 SPECIFICA TION Features: • Superfine Picture Quality 1000 Line Horizontal Resolution • Pure Green and Red Filter Lenses • PERFECT PICTURE System • Remote (Controls many DVD/VCR brands, cable boxes, and satellite boxes.
USEFUL INFO 59 Hitachi America, Ltd. Home Electronics Division 1855 Dornoch Court San Diego, CA 92154 Hitachi America, Ltd. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit.
QR47651.
Ein wichtiger Punkt beim Kauf des Geräts Hitachi 53SBX10B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hitachi 53SBX10B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hitachi 53SBX10B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hitachi 53SBX10B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hitachi 53SBX10B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hitachi 53SBX10B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hitachi 53SBX10B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hitachi 53SBX10B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hitachi 53SBX10B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
