Benutzeranleitung / Produktwartung 51F710 des Produzenten Hitachi
Zur Seite of 80
PR OJECTION COLOR TV Operating Guide f or 51F710, 57F710, 65F710, 51F710S, 57F710S, 65F710S IMPORT ANT SAFETY INSTRUCTIONS ................................................................................ 2-3 FIRST TIME USE ............................
IMPOR T ANT SAFETY INSTR UCTIONS 2 SAFETY POINTS Y OU SHOULD KNO W ABOUT Y OUR HIT A CHI TELEVISION Our reputation has been built on the quality , perf or mance, and ease of service of HIT ACHI tele visions. Saf ety is also foremost in our minds in the design of these units .
ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT ( NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUNDING CONDUCTORS POWER SERVICE GROUNDING E LECTRODE SYSTEM (NEC ART 250 PART H) N EC NAT.
A CCESSORIES 4 FIRST TIME USE 1. Remote Control Unit CLU-4341UG2 (P ar t No . HL02071) or CLU4351UG2 (P ar t No . HL02072). 2. T wo “AA” size, 1.5V batteries (F or Remote Control Unit). 3. “Z” Allen K ey (P ar t No . 61010122). REMO TE CONTR OL B A TTER Y INST ALLA TION AND REPLA CEMENT 1.
HO W T O SET UP Y OUR NEW HIT A CHI PROJECTION TV 5 CA UTION: Magnetic fields, such as those of e xternal speakers, ma y cause the picture to distor t if they are placed too close to the tele vision. Mo ve the magnetic field source a wa y from the television until there is no picture distortion.
HOOK-UP CABLES AND CONNECT ORS 6 ANTENNA CONNECTIONS T O REAR J A CK P ANEL VHF (75-Ohm) antenna/CA TV (Cable TV) When using a 75-Ohm coaxial cab le system, connect CA TV coaxial cab le to the ANT A (75-Ohm) terminal. If you ha ve an antenna, connect the coaxial cab le to the ANT B terminal.
FR ONT P ANEL CONTROLS 7 h INPUT 5 S-VIDEO VIDEO AUDIO L/MONO R EXIT INPUT SELECT MENU VOL- VOL+ CH- CH+ E FG H c f a b d g e CURSOR MAGIC FOCUS e i a MENU/SELECT button This button allo ws you to enter the MENU , making it possible to set TV features to y our preference without using the remote .
FR ONT P ANEL JA CKS AND CONNECT ORS 8 The front panel jac ks are pro vided as a conv enience to allow you to easily connect a camcorder or VCR as shown in the f ollowing e xamples: INPUT 5 S-VIDEO VIDEO AUDIO L/MONO R INPUT 5 S-VIDEO VIDEO AUDIO L/MONO R NO TE: 1.
REAR P ANEL J A CKS 9 a Antenna Input ANT A - A 75-Ohm RF antenna or CA TV (Cab le TV) input. ANT A can be displa yed as a main picture or sub-picture. ANT B - A 75-Ohm RF antenna input. ANT B can only be displa y ed as a main picture . ANT B cannot be displa y ed as a sub-picture.
REAR P ANEL J A CKS 10 f HDMI1 (High Definition Multimedia Interface) (INPUT 1) About HDMI HDMI is the ne xt-generation all digital interface f or consumer electronics. HDMI enables the secure distribution of uncompressed high-definition video and multi-channel audio in a single cab le.
After the CableCARD is installed, w ait until the second screen below appears. The third screen below will appear if a channel is not authorized f or viewing. Press the EXIT button to exit the second screen. Please tak e note of all inf ormation on the screen (you will provide this inf ormation to your cable operator).
12 REAR P ANEL CONNECTIONS NO TES: 1. Connect only 1 component to each input jac k. 2. F ollo w connections that per tain to y our personal enter tainment system. 3. Inputs 1 and 2 can accomodate Composite and Component video signals . 4. Cables are not included with the purchase of this TV , e xcept when noted as “pro vided”.
13 TIPS ON REAR P ANEL CONNECTIONS • S-VIDEO , Y -PbPr and HDMI connections are provided f or high perf or mance laserdisc pla yers , VCRs etc. that hav e this f eature. Use these connections in place of the standard video connection if y our de vice has this f eature.
14 CONNECTING EXTERNAL A UDIO SOURCES Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; and 6,381,747 licensed for limited viewing uses only.
15 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A MONA URAL A UDIO SOURCE TO INPUT1~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc play er to the INPUT (VIDEO) jack, as sho wn on the TV set below . 2. Connect the cable from the A UDIO OUT of the VCR or the laserdisc play er to the INPUT (MONO)/L(A UDIO) jack.
16 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO SOURCE T O INPUT1~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc play er to the INPUT (VIDEO) jack, as sho wn on the TV set below . 2. Connect the cable from the A UDIO OUT R of the VCR or the laserdisc play er to the INPUT (A UDIO/R) jack.
17 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING AN S-VIDEO SOURCE T O INPUT 3, 4 AND 5 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc play er to the INPUT (S-VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the A UDIO OUT R of the VCR or the laserdisc play er to the INPUT (A UDIO/R) jack.
18 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE WITH HDMI or D VI CAP ABILITY T O INPUT 1 1. Connect the HDMI or D VI to HDMI connection cable from the output of the HDTV set top bo x or D VD player to the HDMI input as shown on the TV set below .
19 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE T O INPUT 1 OR 2: Y-P B P R . 1. Connect the cable from the Y OUT of the Laserdisc/D VD pla yer or HDTV set top bo x to the INPUT (Y) jack, as shown on the TV set belo w.
20 THE REMO TE CONTROL THE REMO TE CONTR OL In addition to controlling all the functions on y our HIT A CHI Projection TV , the new remote control is designed to oper ate different types of VCRs, CA TV (Cab le TV) conv er ters, set-top-bo x es, satellite receiv ers (SA T) and D VD pla yers with one touch.
21 HO W T O USE THE REMO TE T O CONTR OL Y OUR TV THE REMO TE CONTR OL a PO WER b utton Press this button to turn the TV set on or off when the remote is in TV mode.
22 HO W T O USE THE REMO TE T O CONTR OL Y OUR TV e ASPECT button Press this button to quic kly change the picture format ASPECT ratio . Depending on the input signal f or mat receiv ed, the picture format ratio allows y ou to adjust the images through the follo wing options.
23 HO W T O USE THE REMO TE T O CONTR OL Y OUR TV THE REMO TE CONTR OL f INPUTS button When the remote control is in TV mode, press this b utton to access the INPUTS menu. Use the CURSOR and SELECT buttons to select the inputs that are being used. Pressing the INPUTS button repeatedly will also cycle through the Inputs menu items.
THE REMO TE CONTR OL 24 HO W T O USE THE REMO TE T O CONTR OL Y OUR TV g PICTURE-IN-PICTURE button See separ ate section on pages 26-28 f or a description.
25 THE REMO TE CONTR OL HO W T O USE THE REMO TE T O CONTR OL Y OUR TV m V OLUME (V OL), MUTE button Press the V OLUME button ( G or H ) until y ou obtain the desired sound le vel. T o reduce the sound to one half of nor mal v olume (SOFT MUTE) to answer the telephone , etc.
PICTURE-IN-PICTURE (PIP) 26 THE REMO TE CONTR OL Use abov e connection to view VCR program as a sub-picture while viewing another prog ram as main picture (ANT A, ANT B, INPUT:2, INPUT :3, INPUT:4, or INPUT :5).
27 THE REMO TE CONTR OL PICTURE-IN-PICTURE (PIP) SPLIT MODE PICTURE-IN-PICTURE Split Mode PIP displa ys the main picture and sub-picture ev enly on the screen.
28 THE REMO TE CONTR OL PICTURE-IN-PICTURE (PIP) b P A USE button If y ou wish to freez e the sub-picture, press the P A USE button. This is conv enient when tr ying to write down the address f or a mail order company , recording statistics for a spor ting e vent, etc.
29 THE REMO TE CONTR OL USING THE REMO TE T O CONTR OL CABLE BO X FUNCTIONS Operating the precoded function for y our cable bo x. This remote is designed to operate diff erent types of cable bo x es. Y ou must first program the remote to match the remote system of y our cable bo x (ref er below f or pre-codes).
30 THE REMO TE CONTR OL USING THE REMO TE T O CONTROL SET -T OP-BO X/SA TELLITE RECEIVER FUNCTIONS Operating the precoded function for y our set-top-bo x/satellite receiver . This remote is designed to operate diff erent types of set-top-box/satellite systems .
31 THE REMO TE CONTR OL USING THE REMO TE T O CONTR OL D VD FUNCTIONS Operating the precoded function for y our D VD player . This remote is designed to operate diff erent types of D VD play ers. Y ou must first program the remote to match the remote system of your D VD pla yer (ref er below f or pre-codes).
32 USING Y OUR REMO TE T O CONTROL VCR FUNCTIONS NO TES: 1. If your VCR cannot be operated after performing the abov e procedures, y our VCR’ s code has not been precoded into the remote. 2. In the unlikely e v ent that y our VCR cannot be operated after perf or ming the abov e procedures, please consult y our VCR oper ating guide.
33 ON-SCREEN DISPLA Y (OSD) 1. Press MENU on the remote control to displa y the diff erent features on y our HIT ACHI Projection TV . 2. Press the CURSOR b uttons to navigate and highlight a diff erent feature of the On-Screen Displa y menu. Press the SELECT b utton to select.
34 ON-SCREEN DISPLA Y (OSD) Picture Mode Select between the two picture modes; Day and Night. Contrast Adjust contrast. Brightness Adjust brightness. Color Adjust color .
35 Set the Antenna Set Antenna settings. A uto Channel Scan Set A uto Channel Scan. Signal Meter Access Signal Meter . Channel List Set Channel List. Change Access Code Change Lock access code . Engage Loc k Choose to lock channel, video input, and/or front panel.
VIDEO 36 Color Brightness Contrast Picture Mode Video Move SEL Return Color Temperature Sharpness Tint Edge Enhancement Black Enhancement 100% 50% 50% 50% High Locks Chan.
VIDEO 37 Use this function to change the contrast between b lack and white le vels in the picture . Use the CURSOR buttons G or H to highlight the function to be adjusted. Press the CURSOR buttons F or E to adjust the function. Press the SELECT button to select the function settings .
VIDEO 38 This function allows y ou to Reset the Video Menu Settings of the present input and return it to the Day VIDEO mode . Use the CURSOR buttons to highlight functions . Press the SELECT b utton to select Reset Video Settings. Use the CURSOR button H to access other video settings .
VIDEO 39 Use this function to adjust and balance the percentage of Red, Green and Blue according to the user’ s pref erence in each of the four color temperature settings .
A UDIO 40 ON-SCREEN DISPLA Y Select A UDIO to adjust the TV to y our preference and to impro ve the sound quality . Audio SRS Balance Bass Treble Audio Move SEL Return Audio Source BBE Perfect Volume Internal Speakers 50% Off Stereo Locks Chan.
A UDIO 41 Multi-Channel T elevision Sound will allo w you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a weak stereo broadcast or 2nd A udio Prog (SAP) which may be a secondary language, weather report, etc. The sources received will be displa y ed at the top r ight edge of the TV .
A UDIO 42 Use the functions belo w if y our TV is connected to an amplifier/receiver with optical digital input with Dolb y Digital or PCM decoder capabilities.
43 ASPECT A uto Aspect A utomatically adjust the Aspect Ratio depending on the input signal to fill the screen. Press THE CURSOR buttons G , H , F , E to select men u item. Press THE SELECT button to select. A “ A ” in the bo x indicates that the feature is ON.
44 CHANNEL MANA GER Select Channel Manager to set your Antenna options , run Auto Channel Scan, Check Signal Meter and Set Channel List. NO TE: When a CableCARD is installed, A uto Channel Scan will not be av ailable . This f eature will automatically store active TV channels in Auto Channel Scan memory .
45 CHANNEL MANA GER This function allows y ou to revie w which channels are labeled (CH ID), which hav e been added to Channel Memor y (SCAN), which are protected b y LOCK and which are your F avorite (F A V) Channels. Select Signal Meter when using an indoor or outdoor antenna.
46 LOCKS This function will b loc k out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed f or a scheduled time period that you set. The code to enter the Locks f eature is a f our digit access code number .
47 LOCKS Use MO VIE RA TINGS to pre vent vie wing of any mo vie that you f eel ma y be inappropriate due to its content. Use the CURSOR buttons G or H to select the MO VIE RA TING categor y that you w ant to bloc k. Press SELECT to bloc k the MO VIE RA TING that y ou hav e selected.
48 LOCKS TV R atings Move SEL Return Status TV-Y: TV-Y7: TV-G: TV-PG: TV-14: TV-MA: Sub Category DL S VF V Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Move SEL Select Canadian Rati.
49 LOCKS Canadian Ratings (Eng) Move SEL Return Status C: C8+: G: PG: 14+: 18+: Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Move SEL Select Canadian Ratings (Frn) Canadian Ratings .
50 ON-SCREEN DISPLA Y LOCKS Canadian Ratings (Frn) Move SEL Return Status G: 8 ans+: 13 ans+: 16 ans+: 18 ans+: Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Move SEL Select Canadian.
51 TIMERS Select Timers to set y our Clock, Sleep Timer , Event Timer and Day/Night Timer Recordings. Timers Move SEL Return Locks Chan. Manager Aspect Audio Video Move SEL Sel Timers Setup Set Day/Ni.
52 TIMERS Select this f eature to set your Sleep Timer from 30 minutes to 3 hours (30 min ute increments). Timers Set Day/Night Timer Set Sleep Timer Set The Clock Set Event Timer Timers Set Day/Night.
53 TIMERS NO TE: 1. When the INFO button is pressed, the Ev ent Timer Icon will only display the current date ON/OFF timer . 2. The Off Timer will only activate if the TV was turned on by the On Timer and no channel selection was made after this time .
54 SETUP Select SETUP when setting your TV up for the first time. Use the CURSOR buttons G or H on the remote to highlight the function desired. Setup Set Virtual HD Set The Inputs Menu Preference Magic Focus Tune Up Setup Move SEL Return Set Monitor Out Set Closed Captions Set Black Side Panel About Your TV Locks Chan.
55 SETUP MAGIC FOCUS MAGIC FOCUS A uto Digital Conver gence Adjustment Please turn ON your television f or at least 20 minutes bef ore using this f eature. The Magic F ocus button on control panel will not work when adjustment mode is set to Manual (see page 56 or 57).
56 ON-SCREEN DISPLA Y SETUP Man ual Con vergence Adjustment Mode (9 P oint Manual Adjustment) Using the Remote Control, select SETUP-MA GIC FOCUS TUNE UP-MANU AL ADJUSTMENT MODE-9 POINT MANUAL-ST AR T to access conv ergence 9 point pattern. The adjustment point is indicated by the Adjustment P oint Cursor .
57 SETUP Man ual Con vergence Adjustment Mode (117 P oint Manual Adjustment) Using the Remote Control, select SETUP-MA GIC FOCUS TUNE UP-MANU AL ADJUSTMENT MODE-117 POINT MANU AL-ST ART to access conv ergence 117 point pattern. The adjustment point is indicated by the Adjustment P oint Cursor .
58 SETUP This f eature will allow you to select an y one of three different languages f or all on-screen displa ys. Use the CURSOR buttons F , E to highlight the language of y our choice. Press SELECT to select the highlighted language. Press EXIT to quit menu or select MENU PREFERENCE to return to previous menu.
59 SETUP This function allows y ou to choose from two menu bac kgrounds. Use the CURSOR buttoms F , E to highlight SET THE MENU BACKGR OUND (shaded or solid), and press the SELECT button to select setting. Press EXIT to quit menu or the CURSOR b uttons F to retur n to pre vious menu.
60 SETUP Use this function to automatically turn the TV on and tune to Video2 when it detects a video signal to input 2. Use the CURSOR buttons F , E , G or H , then press the SELECT b utton to change A UT O LINK setting. When A UT O is selected, the TV will turn on and tune to Video2 automatically , when the Video2 input de vice is tur ned on.
61 SETUP Set Virtual HD Set Black Side Panel Use this f eature to select between 1080i and 540p . The BLA CK SIDE P ANEL function turns the gra y side bars on/off when watching 4:3 signals in Standard mode. The top/bottom gra y bar will appear in SPLIT MODE PIP and SPLIT FREEZE.
62 SETUP Caption Display: On/Off will tur n the displa y on or off. A uto will tur n the display on when Mute/Soft Mute is on. Caption Mode: Captions is for the progr am you are viewing. Te x t is for additional inf ormation such as news repor ts or a TV program guide .
63 SETUP Move SEL Return Model: Dimensions (Inches) (mm) Height: - / - Width: - / - Depth: - / - Move SEL Return Caution: Continuous on-screen displays such as Video games, stock market quotations, and other fixed (non-moving) patterns can cause permanent damage.
Move SEL Return Select ON to have the TV tune channels quickly at 1st turn on. Select OFF to save electricity. Off On Quick Start Up Upgrades Set AV Control CableCARD Info Setup Move SEL Select Setup Quick Start Up 64 SETUP NO TE: An y po w er interr uption dur ing the upg r ade process will cancel the upg r ade.
65 CARE OF Y OUR HIT A CHI TELEVISION AND Y OUR REMO TE CONTR OL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is e xtremely dir ty .
66 RECEPTION PR OBLEMS • IGNITION NOISE: Black spots or horizontal streaks ma y appear , picture ma y flutter or drift. Usually caused by interf erence from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances.
USEFUL INFO 67 HIT A CHI Projection T ele vision incor porates adv anced power surge protection technology designed to protect against component or circuit damage due to e xter nal or internal voltage pow er surges. IF Y OUR TELEVISION SHOULD APPEAR T O HA VE A LOSS OF POWER, PLEASE FOLLO W THIS PROCEDURE: 1.
USEFUL INFO 68 • V elocity Modulation • Six Aspect Modes • Closed Caption Decoder • 2-T uner Picture in Picture • Magic Focus (A uto Digital Conv ergence and 9-point/117-point Manual Adjustm.
USEFUL INFO 69 Hitachi America, L TD. Home Electronics Division 900 Hitachi W ay Chula Vista, CA 91914-3556 Hitachi America, L TD . Home Electr onics Division Hitachi has made e very effor t to assure y ou hours of trouble free operation from y our unit.
USEFUL INFO 70 In Canada: 1-800-HIT A CHI (1-800-448-2244) Monday - Frida y EST 9:00am - 7:00pm Saturda y EST 9:00am - 5:00pm Hitachi Canada, L TD . Digital Media Division Should you have any questions regarding warranty , service, operation, or technical assistance, please contact: Look for your French Manual on the outside of the box.
57” DISASSEMBL Y/ASSEMBL Y INSTR UCTIONS 71 IMPOR T ANT POINTS: (a) Do not attempt to perf or m this work by y ourself . (b) Request an installation specialist to install this unit. (c) HIT A CHI assumes no responsibility or liability for injury/damage as a result of con- sumer installation and handling.
57” DISASSEMBL Y/ASSEMBL Y INSTR UCTIONS 72 (c) (d) 1 - SEP ARA TION PROCEDURE CONTINUED STEP 4 Cont. STEP 5 Remov e the joint connector bolts from each side of the back cov er using the allen wrench that is provided inside of the instruction bag, see (a) and (b).
57” DISASSEMBL Y/ASSEMBL Y INSTR UCTIONS 73 2 - RE-ASSEMBL Y PROCEDURE STEP 8 T o re-assemb le the set, lift the top por tion and align onto the bottom cabinet. Gently lower the top portion until it sits flush on the bottom. STEP 9 Re-install the joint connector bolts (4 pcs.
74 65” DISASSEMBL Y/ASSEMBL Y INSTR UCTIONS IMPOR T ANT POINTS: CA UTION: DISCONNECT UNIT FROM PO WER SOURCE BEFORE DISASSEMBL Y / ASSEMBL Y 1 - SEP ARA TION PROCEDURE (Note: read all instructions and understand ho w to properl y and safel y disassemble and assemble unit) (a) Do not attempt to perform this work by yourself .
75 (c) (d) 65” DISASSEMBL Y/ASSEMBL Y INSTR UCTIONS 1 - SEP ARA TION PROCEDURE CONTINUED STEP 3 Cont. Caution: When the TV is separ ated, the top por tion w eighs 112 lbs. This task should be done by two persons to carry top por tion when separating this TV .
76 65” DISASSEMBL Y/ASSEMBL Y INSTR UCTIONS 2 - RE-ASSEMBL Y PROCEDURE STEP 7 T o re-assemb le the set, lift the top por tion and align onto the bottom cabinet. Gently lower the top portion until it sits flush on the bottom. STEP 8 Re-install the joint connector bolts (4 pcs.
77 INDEX A Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Antennas (Connecting) . . . . . . . . . . . . . . . . . . . . . . . . .5,6 Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22,43 A udio Languages .
78 END USER LICENSE A GREEMENT FOR HIT A CHI DTV SOFTW ARE IMPORT ANT – READ CAREFULL Y : This License Agreement is a legal agreement between y ou and Hitachi America, Ltd.
79 END USER LICENSE A GREEMENT FOR HIT A CHI DTV SOFTW ARE 7. LIMIT A TION OF LIABILITY . IN NO EVENT SHALL HAL-HED OR ANY OF ITS P ARENT OR AFFILIA TE COMP A- NIES BE LIABLE T O Y OU OR ANY THIRD P A.
QR61703.
Ein wichtiger Punkt beim Kauf des Geräts Hitachi 51F710 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hitachi 51F710 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hitachi 51F710 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hitachi 51F710 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hitachi 51F710 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hitachi 51F710 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hitachi 51F710 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hitachi 51F710. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hitachi 51F710 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
