Benutzeranleitung / Produktwartung 32HLX61 des Produzenten Hitachi
Zur Seite of 104
LCD TELEVISION A VC (Audio Video Control Center) & LCD Display Monitor Operating Guide for 32HLX61 IMPORT ANT SAFETY INSTRUCTIONS ................................................................................ 2-3 FIRST TIME USE .................
2 IMPORT ANT SAFETY INSTRUCTIONS SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HIT ACHI LCD TELEVISION Our reputation has been built on the quality , performance, and ease of service of HIT ACHI LCD televisions. Safety is also foremost in our minds in the design of these units.
IMPORT ANT SAFETY INSTRUCTIONS 3 ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUNDING CONDUCTORS POWER SERVICE GROUNDING ELECTRODE SYSTE.
ACCESSORIES 4 1. Remote Control Unit CLU-3853WL (P# HL02067) 2. Simple Remote Control Unit CLU-122S (P# HL01863) 3. T wo “AA” size, 1.5V batteries (P# FQ00021). 3. T wo “AAA” size, 1.5V batteries (P# FR00061). 5. Power Cord: 6. Monitor Connection Cable (P# EW07883).
Securing to a table-top 1. Using wood screws (two) fasten the set to the clamping screw holes on the rear of the LCD Display stand as shown below . 2. Using commercially available wood screws, secure the set firmly in position. 3. Leave some space around the unit for proper operation of the power swivel stand.
HOW T O SET UP YOUR NEW HIT ACHI LCD TELEVISION 6 50 50 4" Minimum 4" Minimum BEST HORIZONTAL VIEWING ANGLE 5' 10' 15' 20' S S R L VIEWING The major benefit of the HIT ACHI LCD T elevision is its large viewing screen.
HOOKUP CABLES 7 Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products.
ANTENNA CONNECTIONS T O REAR P ANEL JACKS 8 VHF (75-Ohm) antenna/CA TV (Cable TV) When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CA TV coaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna, connect the coaxial cable to the ANT B terminal.
FRONT P ANEL CONTROLS 9 FRONT VIEW MENU/SELECT button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote.
FRONT P ANEL CONTROLS 10 POWER button Display Monitor “MAIN POWER” button This power button is for the complete system, and must be turned ON/OFF manually . It is recommended to leave the “MAIN POWER” to ON condition (lights red) for stand-by mode.
REAR P ANEL JACKS 11 Component: Y -P B P R Inputs Inputs 1 and 2 provide Y -P B P R jacks for connecting equipment with this capability , such as a DVD player or Set T op Box. Y ou may use composite video signal for INPUTS 1 and 2. NOTES: 1. DO NOT connect composite VIDEO and S-VIDEO to Input 3, 4 or 5 at the same time.
REAR P ANEL JACKS 12 RGB - Analog Input Use this 15-pin D-Sub input for your external devices with RGB output (see page 27). RGB - Audio Input Connect audio for RGB input (if you have mono sound, insert the audio cable into the left audio jack).
INSERT THIS END CableCARD Digital Cable REAR P ANEL JACKS 13 After the CableCARD is installed, wait until the second screen below appears. The third screen below will appear if a channel is not authorized for viewing. Press the EXIT button to exit the second screen.
CONNECTING LCD DISPLA Y MONIT OR TO A VC BOX 14 It is recommended that the subwoofer cable will be binded together with the Power Swivel connector using one of the accessory wire clamps (see below). 1. From the owner ’s accessory you will find the Monitor Connector cable.
CONNECTING EXTERNAL VIDEO SOURCES 15 The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: NOTES: 1. Completely insert connection cord plugs when connecting to front panel jacks.
FIRST TIME USE CONNECTING EXTERNAL VIDEO SOURCES 16 The exact arrangement you use to connect the VCR, camcorder , laserdisc player , DVD player , or HDTV Set T op Box to your LCD TV is dependent on the model and features of each component. Check the owner ’s manual of each component for the location of video and audio inputs and outputs.
CONNECTING EXTERNAL VIDEO SOURCES 17 CONNECTING A STEREO VCR OR STEREO LASERDISC PLA YER 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the A VC Center below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
FIRST TIME USE 18 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING S-VIDEO VCR OR LASERDISC PLA YER 1. Connect the cable from the S-VIDEO OUT of the S-VHS VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the A VC Center below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
19 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE WITH HDMI or DVI CAP ABILITY TO INPUT 1 or INPUT 2 1. Connect the HDMI or DVI to HDMI connection cable from the output of the HDTV set top box or DVD player to the HDMI input as shown on the A VC Center below .
FIRST TIME USE 20 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO LASERDISC/DVD PLA YER OR HDTV SET TOP BOX T O INPUT 1 OR 2 COMPONENT : Y -P B P R . 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the A VC Center below .
21 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE WITH DIGIT AL INTERF ACE CAP ABILITY T O IEEE1394 TERMINALS 1. Connect the IEEE1394 cable from the output of the component with IEEE1394 capability , such as a Set-T op-Box or Digital VCR, to the IEEE1394 input terminals shown on the A VC Center below .
FIRST TIME USE 22 CONNECTING EXTERNAL AUDIO/VIDEO DEVICES CONNECTING EXTERNAL AUDIO AMPLIFIER T o monitor the audio level of the LCD TV to an external audio amplifier , connect the system as shown below . The “OPTICAL OUT” from the A VC center is a fixed output.
CONNECTING A V NETWORK 23 Y our Hitachi LCD T elevision is equipped with an A V Network feature. This feature helps to control your external Audio/Video equipment (VCR, Set T op Box, DVD, etc.). Once this is setup, it allows your IR Mouse connector to control your equipment using your Hitachi LCD TV Remote Control.
FIRST TIME USE A V NETWORK SETUP WIZARD 24 SETUP PROCEDURE USING A V NETWORK DEVICE CODES: A DVD Setup example is shown below . Setup of DVD2, VCR, VCR2, PV Recorder , Cable Box and Set-T op-Box follows this same procedure.
25 FIRST TIME USE A V NETWORK SETUP WIZARD SETUP PROCEDURE USING A V NETWORK DEVICE CODES: An A V Receiver Setup example is shown below . If your device is not listed or the device codes not work after following the setu p procedure, please refer to the A V NET Learning wizard procedure on pages 33-35.
FIRST TIME USE AUDIO/VIDEO CODES FOR A V NETWORK (not for remote control) 26 VCR BRAND . . . . . . . . . . . . . . . . . . . . . . . . CODE Admiral . . . . . . . . . . . . . . . . . . . . . . . . . 0048, 0209 Adventura . . . . . . . . . . . . . . . . .
REAR P ANEL CONNECTIONS 27 VCR #1 Outside antenna or cable TV coaxial cable 2-Way signal splitter ANT IN OUTPUT S-VIDEO VL R (PROVIDED) DI G I COMPUTER TA L OUTPUT CAPABILITY DI G ITAL OUTPUT Laserdisc player , VCR, camcorder , etc.
TIPS ON REAR P ANEL CONNECTIONS 28 • S-VIDEO, YPbPR, IEEE 1394 or HDMI connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature.
29 G U I D E A / V N E T THE REMOTE CONTROL In addition to controlling all the functions on your HIT ACHI LCD TV , the new remote control is designed to operate different typ es of VCRs, CA TV (Cable TV) converters, set-top-box, satellite receiver , DVD players, and other audio/video equipment with one touch.
30 G U I D E A /V N E T THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV POWER button Press this button to turn the TV set on or of f when the remote is in TV mode. (See page 29 for instructions on how to set the remote control to TV mode.
31 G U I D E A / V N E T THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV ASPECT button Press this button to quickly change the picture format ASPECT ratio. Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options.
32 G U I D E A /V N E T THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV DA Y/NIGHT button Press this button to toggle between Day and Night picture mode settings. Select Day for day time viewing with more brightness and contrast to compete with room light.
33 G U I D E A / V N E T THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV A V NET button Press this button to access the Audio/Video network (A V Net) menu. The A V Net allows the user to control external components with the LCD TV’ s remote control.
34 G U I D E A /V N E T HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV A V NET LEARNING WIZARD This function of the A V NET makes it more expandable because it allows the user to use equipment that is not supported by the A V NET Codes.
35 G U I D E A / V N E T HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV A V NET LEARNING WIZARD For example, after programming your A V Receiver to the A V NET and the soft keys do not work, the user has to use the A V NET Learning Wizard.
36 G U I D E A /V N E T THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV INPUTS button When the remote control is in TV mode, press this button to access the INPUTS menu. Use the CURSOR P AD , , and SELECT button or CURSOR P AD to select the inputs that are being used.
37 G U I D E A / V N E T HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV PHOTO INPUT This feature is useful for viewing digital still pictures from your digital camera using the Photo Input in the front panel of the A VC. JUMP Select this menu item to view the chosen picture number .
38 G U I D E A /V N E T THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV SLIDESHOW Select this menu item to start a slideshow of the Photos in the Digital Camera. T ime interval selections can be set from 5, 10 and 30 seconds. Use CURSOR P AD or to highlight Slideshow item.
39 G U I D E A / V N E T HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV NOTES: 1. The digital device will be automatically recognized if properly connected. 2. Four (4) IEEE1394 devices can be listed on the menu, but only 1 device at a time can be used.
40 G U I D E A /V N E T THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV INFO button Press this button when you want to check the channel being received, the picture source, if the channel has stereo (ST) or second audio program (SAP), the time, CHANNEL ID and if the TIMER is set.
41 G U I D E A / V N E T HOW T O USE THE REMOTE T O CONTROL YOUR LCD TV VOLUME (VOL) WHEEL, MUTE button Use the VOL WHEEL ( or ) until you obtain the desired sound level. T o reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc.
42 G U I D E A /V N E T THE REMOTE CONTROL PICTURE-IN-PICTURE (PIP) Use above connection to view VCR program as a sub-picture while viewing another program as main picture (ANT A, ANT B, INPUT :1, INPUT :2, INPUT :4, or INPUT :5).
43 G U I D E A / V N E T PICTURE-IN-PICTURE (PIP) SPLIT MODE PICTURE-IN-PICTURE Split Mode PIP displays the main picture and sub-picture evenly on the screen. Main Picture Sub Picture SURF MODE PICTURE-IN-PICTURE Surf Mode PIP automatically scans all active channels (those set in memory) and displays them as PIP Pictures or Thumbnail channels.
44 G U I D E A /V N E T THE REMOTE CONTROL PICTURE-IN-PICTURE (PIP) P AUSE button If you wish to freeze the sub-picture, press the P AUSE button. This is convenient when trying to write down the address for a mail order company , recording statistics for a sporting event, etc.
45 G U I D E A / V N E T HOW T O USE THE REMOTE T O CONTROL CABLE BOX FUNCTIONS Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. Y ou must first program the remote to match the remote system of your cable box (refer to pages 51-52 for pre-codes).
46 G U I D E A /V N E T THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL SET -TOP-BOX/SA TELLITE RECEIVER FUNCTIONS Operating the precoded function for your set-top-box/satellite receiver . This remote is designed to operate different types of set-top-box/satellite systems.
47 G U I D E A / V N E T HOW T O USE THE REMOTE T O CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player . This remote is designed to operate different types of DVD players. Y ou must first program the remote to match the remote system of your DVD player (refer to pages 51-52 for pre-codes).
48 G U I D E A /V N E T THE REMOTE CONTROL HOW T O USE THE REMOTE T O CONTROL VCR/PVR FUNCTIONS Operating the precoded function for your VCR/PVR (Personal Video Recorder).
49 G U I D E A / V N E T HOW T O USE THE REMOTE T O CONTROL ADDITIONAL AUDIO EQUIPMENT A/V NET GUIDE MY AUDIO EQUIPMENT CODE IS: NOTES: 1.
50 G U I D E A /V N E T THE REMOTE CONTROL HOW T O USE THE REMOTE “ENT” BUTT ON TO ACCESS THE SPECIFIED INPUT OF THE LCD TV INPUT ACCESS This optional feature allows the user of the remote control to setup it’s ENTER (ENT) button to access the specified input of th e TV .
51 G U I D E A / V N E T PVR/VCR, CABLE, SA TELLITE, DVD AND AUDIO CODES FOR REMOTE CONTROL VCR BRAND . . . . . . . . . . . . . . . CODE ABS . . . . . . . . . . . . . . . . . . . . . . . . 1972 Admiral . . . . . . . . . . . . . . . . 0048, 0209 Adventura .
52 G U I D E A /V N E T THE REMOTE CONTROL PVR/VCR, CABLE, SA TELLITE, DVD AND AUDIO CODES FOR REMOTE CONTROL NSC . . . . . . . . . . . . . . . . . . . . . . . . 0063 Novaplex . . . . . . . . . . . . . . . . . . . . 0618 Oak . . . . . . . . . . . . . .
SIMPLE REMOTE 53 G U I D E A / V N E T THE REMOTE CONTROL MUTE FAV C H SELECT VOL + CH - CH + A/V NET VOL - MENU INPUTS POWER EXIT POWER button Press Power button to turn the LCD T elevision ON or OFF .
54 ON-SCREEN DISPLA Y OSD (On-Screen Display) 1. Press MENU on the remote control to display the different features on your HIT ACHI LCD TV . 2. Use the CURSOR P AD (buttons , , and ) to navigate to a different menu item. 3. Press EXIT on the remote control to quickly exit from a menu.
55 ON-SCREEN DISPLA Y OSD (On-Screen Display) Picture Mode Select between the two picture modes; Day and Night. Contrast Adjust contrast. Brightness Adjust brightness.
56 ON-SCREEN DISPLA Y OSD (On-Screen Display) Set the Antenna Set Antenna settings. Auto Channel Scan Set Auto Channel Scan. Signal Meter Access Signal Meter . Channel List Set Channel List. Change Access Code Change Lock access code. Engage Lock Choose to lock channel, video input, and/or front panel.
VIDEO 57 ON-SCREEN DISPLA Y Color Brightness Contrast Picture Mode Video Move SEL Return Color Temperature Sharpness Tint Contrast Mode Black Enhancement 100% 50% 50% 50% High SEL Select Day Night or Reset Video Settings ANT A/B Middle Dynamic Picture Mode Day Night Return Next/Prev Locks Chan.
VIDEO 58 ON-SCREEN DISPLA Y Use this function to change the contrast between black and white levels in the picture. Use the CURSOR P AD or to highlight the function to be adjusted. Press the SELECT button or the CURSOR P AD to select the function settings.
VIDEO 59 ON-SCREEN DISPLA Y This function allows you to Reset the Video Menu Settings of the present input and return it to the Day VIDEO mode. Use CURSOR P AD or to highlight functions. Press the SELECT button or CURSOR P AD to select Reset Video Settings.
VIDEO 60 ON-SCREEN DISPLA Y Use this function to adjust and balance the percentage of Red, Green and Blue according to the user ’s preference in each of the four color temperature settings.
61 ON-SCREEN DISPLA Y This function complements and enhances bass performance. The Matrix Surround features the spacious sound effects of a stadium that can be turned ON or OFF . AUDIO Select AUDIO to adjust the TV to your preference and to improve the sound quality .
62 ON-SCREEN DISPLA Y AUDIO Use the functions below if your TV is connected to an amplifier/receiver with optical digital input with Dolby Digital or PCM d ecoder capabilities.
63 ON-SCREEN DISPLA Y ASPECT Aspect Auto Aspect Automatically adjust the Aspect Ratio depending on the input signal to fill the screen. Press CURSOR P AD , , to select menu item. Press the SELECT button to select. A “ ” in the box indicates that the feature is ON.
64 ON-SCREEN DISPLA Y CHANNEL MANAGER Select Channel Manager to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List. NOTE: When a CableCARD is installed, Auto Channel Scan will not be available since channels will be fixed based on what was agreed upon by you and your cable operator .
65 ON-SCREEN DISPLA Y CHANNEL MANAGER This function allows you to review which channels are labeled (CH ID), which have been added to Channel Memory (SCAN), which are protected by LOCK and which are your Favorite (F A V) Channels. Select Signal Meter when using an indoor or outdoor antenna.
66 ON-SCREEN DISPLA Y LOCKS This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed for a scheduled time period that you set. The code to enter the Locks feature is a four digit access code number .
67 ON-SCREEN DISPLA Y LOCKS Use MOVIE RA TINGS to prevent viewing of any movie that you feel may be inappropriate due to its content. Use the CURSOR P AD or to select the MOVIE RA TING category that you want to block. Press SELECT to block the MOVIE RA TING that you have selected.
68 ON-SCREEN DISPLA Y LOCKS TV Ratings Move SEL Return Status TV-Y: TV-Y7: TV-G: TV-PG: TV-14: TV-MA: Sub Category DL S VF V Movie Ratings Engage Lock Change Access Code Locks Move SEL Select Canadian.
69 ON-SCREEN DISPLA Y LOCKS Canadian Ratings (Eng) Move SEL Return Status C: C8+: G: PG: 14+: 18+: Movie Ratings Engage Lock Change Access Code Locks Move SEL Select Canadian Ratings (Frn) Canadian Ra.
70 ON-SCREEN DISPLA Y LOCKS Canadian Ratings (Frn) Move SEL Return Status G: 8 ans+: 13 ans+: 16 ans+: 18 ans+: Movie Ratings Engage Lock Change Access Code Locks Move SEL Select Canadian Ratings (Frn.
71 ON-SCREEN DISPLA Y TIMERS Select T imers to set your Clock, Sleep T imer , Event T imer and Day/Night T imer Recordings. Timers Move SEL Return Set Day/Night Timer Set Sleep Timer Set The Clock Set Event Timer Locks Chan. Manager Aspect Audio Video Move SEL Sel.
72 ON-SCREEN DISPLA Y TIMERS Select this feature to set your Sleep T imer from 30 minutes to 3 hours (30 minute increments). 0:30 Timers Set Day/Night Timer Set Sleep Timer Set The Clock Set Event Tim.
73 ON-SCREEN DISPLA Y TIMERS NOTE: 1. When the INFO button is pressed, the Event T imer Icon will only display the current date ON/OFF timer . 2. The Off T imer will only activate if the TV was turned on by the On Timer and no channel selection was made after this time.
74 ON-SCREEN DISPLA Y TIMERS Select this feature to set and record digital channels using your device connected to the IEEE 1394 jacks (ex. D-VHS). Set Timer Recording Move SEL Return Timers Set Timer Recording Timers Set Day/Night Timer Set Sleep Timer Set The Clock Set Event Timer Move SEL Set Timer Recording Select Record1 --:--AM --:--AM Jan.
75 ON-SCREEN DISPLA Y SETUP Select SETUP when setting up your TV for the first time. Use the CURSOR P AD or on the remote to highlight the function desired. This feature will allow you to select any one of three different languages for all on-screen displays.
76 ON-SCREEN DISPLA Y SETUP This function allows you to choose from two menu backgrounds. Use CURSOR P AD or to highlight SET THE MENU BACKGROUND (shaded or solid), and the SELECT button to select the setting. Press EXIT to quit the menu or select MENU PREFERENCE to return to the previous menu.
77 SETUP Use this feature to give a name to any of the five video inputs. Press CURSOR P AD , to highlight the name of the video inputs. Press the CURSOR P AD to access the RENAME LIST . Use the CURSOR P AD to navigate into the RENAME LIST and choose a name to the video input.
78 ON-SCREEN DISPLA Y Next/Prev On/Off SEL Return Set Black Side Panel Set The Inputs Screen Saver Menu Preference Setup Move SEL Select Set Monitor Out Set Closed Captions Set Black Side Panel Off or SETUP Use this function to automatically turn the TV on and tune to V ideo 2 when it detects a video signal to input 2.
79 ON-SCREEN DISPLA Y SETUP Caption Display: On/Off will turn the display on or off. Auto will turn the display on when Mute/Soft Mute is on. Caption Mode: Captions is for the program you are viewing. T ext is for additional information such as news reports or a TV program guide.
80 This feature will select the A V Control feature. Set this feature if you want to control some of the TV functions from an external home control system. Set AV Control Move SEL Return If you want to use the AV Control function, please set the RS232C.
81 SETUP NOTE: Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade procedure. Upgrades Move SEL Return Software Version #: Main VXXXX.XXXX 1394 VXXXX.03 MMC Software Upgrade Please insert MMC card before upgrading.
RGB ON SCREEN DISPLA Y 82 NOTE: 1. Dots correspond to the true resolution in Real Mode of aspect ratio, when you select VGA 640 x 480 signal from the table above. (One dot corresponds to one pixel). 2. Always reset AUTO ADJUST feature when setting new display setting or when changing to a new computer (see page 89).
83 RGB ON SCREEN DISPLA Y No. Item Operation 1 Video Control Contrast and brightness work separately, however, other picture controls are not available. 2 AV Net Available. 3 Audio Settings Not available. 4 Closed Caption Not available. 5 Clock Clock indication is shown.
RGB ON SCREEN DISPLA Y 84 USING THE RGB INPUT 4. Other signal formats may not be displayed correctly . Use AUT O ADJUST to automatically adjust the horizontal position, vertical position, clock, and phase.
85 RGB ON SCREEN DISPLA Y 1. Press the MENU button, then use the CURSOR P AD or and SELECT button or CURSOR P AD on the remote control to display the different features in RGB MODE. 2. Press EXIT on the remote control to quickly exit from a menu.
RGB ON SCREEN DISPLA Y 86 USING THE RGB INPUT Contrast Change the contrast between black and white levels in the picture. Brightness Adjust overall picture brightness. Color T emperature Select between HIGH (9,300K), MEDIUM (7,500K), ST ANDARD (6,500K), or Black/White (5,400K).
87 RGB ON SCREEN DISPLA Y USING THE RGB INPUT VIDEO ADJUSTMENTS The following adjustments are independent of the TV mode: •Press MENU in RGB mode for on screen display .
RGB ON SCREEN DISPLA Y 88 USING THE RGB INPUT Enhances the picture detail. Use CURSOR P AD or to set ENHANCER Off, Low , Medium or High. Press the MENU button to return to RGB MODE MENU or EXIT to quit.
89 RGB ON SCREEN DISPLA Y USING THE RGB INPUT NOTES: • Press SELECT to AUTO ADJUST the RGB mode. • The other functions do not operate while AUTO ADJUST is in progress. • Allow the LCD TV to warm up for 20 minutes before performing AUTO ADJUST . • Select a bright image for display while AUTO ADJUST takes place.
RGB ON SCREEN DISPLA Y 90 RESET Set HORIZONT AL POSITION, VER TICAL POSITION, HORIZONT AL CLOCK and CLOCK PHASE to factory preset, for current RGB format. Horizontal Clock Vertical Position Horizontal Position Auto Adjust Setup Move SEL Select Input Level Reset Clock Phase Black Side Panel 0 0 0 Reset 0.
91 RGB ON SCREEN DISPLA Y INPUT LEVEL Select the Input Level voltage between 0.7V and 1.0V . Horizontal Clock Vertical Position Horizontal Position Auto Adjust Setup Move SEL Select Input Level Reset Clock Phase Black Side Panel 0 0 0 Reset 0.7V Off Adjust 0 Use CURSOR P AD or to select between 0.
92 CARE OF YOUR HIT ACHI LCD DISPLA Y AND YOUR REMOTE CONTROL DO Dust the screen and frame with a cleaning cloth from the accessories pack. Clean the screen and frame with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty .
93 RECEPTION PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. • GHOSTS: Ghosts are caused by the television signal following two paths.
USEFUL INFO 9 4 HIT ACHI Liquid Crystal Display incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR TO HA VE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1.
USEFUL INFO 95 A buzzing sound might be heard when the LCD display monitor is turned on in a very quiet room. This is due to the LCD panel drive circuit when it is functioning.
96 PLUG and PLA Y This LCD T elevision complies with VESA DDC2B specifications, Plug & Play is a system with computer , peripherals (including monitors) and operating system. It works when the monitor is connected to a DDC ready computer that is running an operating system software that is capable for the plug & play .
USEFUL INFO 97 AGENCY REGULA TOR Y INFORMA TION Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
USEFUL INFO 98 Features: • New Easy-to-Use On-Screen Menu Control (3 Language) • New A V Network System Control Control up to 4 components with one remote 2 IR Mouse cables included Control Codes Stored in A V Control Center • T wo T uner Split Screen except RGB modes.
USEFUL INFO 99 Hitachi America, L TD. Home Electronics Division 900 Hitachi W ay Chula Vista, CA 91914-3556 Hitachi America, L TD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit.
USEFUL INFO 100 In Canada: 1-800-HIT ACHI (1-800-448-2244) Monday - Friday EST 9:00am - 7:00pm Saturday EST 9:00am - 5:00pm Hitachi Canada, L TD. Digital Media Division Should you have any questions regarding warranty , service, operation, or technical assistance, please contact: Look for your French Manual on the outside of the box.
101 INDEX A Accessories, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Antennas (Connecting), . . . . . . . . . . . . . . . . . . . . . . . .8 Antenna Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Aspect Ratio, .
102 END USER LICENSE AGREEMENT FOR HIT ACHI DTV SOFTW ARE IMPORT ANT – READ CAREFULL Y : This End User License Agreement for Hitachi DTV Software (this “Agreement”) is a legal agreement between you (“you” or “your”), in your capacity as the owner of a Hitachi brand digital television (the “DTV”), and Hitachi America, Ltd.
103 END USER LICENSE AGREEMENT FOR HIT ACHI DTV SOFTW ARE 5. EXPORT RESTRICTIONS. Hitachi is licensing the Software for use within North America only . Y ou agree that you will not export or re-export the Software. Y ou specifically agree not to export or re-export the Software: (i) to any country to which the U.
QR64521.
Ein wichtiger Punkt beim Kauf des Geräts Hitachi 32HLX61 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hitachi 32HLX61 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hitachi 32HLX61 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hitachi 32HLX61 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hitachi 32HLX61 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hitachi 32HLX61 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hitachi 32HLX61 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hitachi 32HLX61. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hitachi 32HLX61 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
