Benutzeranleitung / Produktwartung DS-2CD7254FWD-EIZH des Produzenten Hikvision
Zur Seite of 95
Netw ork Camer a U ser Manual V5.0 UD .6L0201D1001A01 Hikvision Digital T echnolog y Co., L td. http ://www .hikvision.com.
User Manual of Network Camera 1 This manual is applied to the following camera models: T ype Model Bo x camera I DS -2CD883F-E(W), DS-2CD855(F)-E, DS-2CD854F(WD)-E(W), DS -2CD853F-E(W), DS-2CD864F(WD).
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 2 Thank you for purchasing our product. If t here are any questions, or requests, plea se do not hesitate to contact the dealer. This manual applies to Network Camer a.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 3 R egulatory In format ion FCC Inf ormation FCC compliance: This equipment has been tes te d and fou nd to comply with the limits for a digi tal device, pur suant to par t 15 of the FCC Rule s.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 4 Saf ety W arnings and Cautions Plea se pay a tten tion to the following warnings and cautions: Haz ardous V oltage ma y be presen t: Special measur es and precautio ns must be tak en when using this devic e.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 5 P ower Cord Requi rement s: The connec tor that plugs in to the wall o utlet must be a grounding-type male plug desig ned f or use in y our region. It mus t have cer tification marks showing certi fication by an ag ency in your r egion.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 6 determine d by turning the equipmen t on and of f , the user is requir ed to t ak e measur es t o eliminate the in terf erence or discontinue the use of this equipment.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 7 Saf ety Ins truction These instructions are inten ded to ensure that the user can use the pro duct corr ectly to av oid danger or pr operty loss.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 8 Cautions: Mak e sure the pow er supply volt age is corr ect bef ore using the c amera. Do not drop t he camera or subject it to phy sical shock .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 9 Cont ent s CHAPTER 1 S YSTEM REQUIREMENT ............................................................................................ 12 CHAPTER 2 NETWORK CONNECTION .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 10 6.4 C ONFIGUR ING V IDEO AND A UDIO S ETTINGS ..................................................................................... 46 6.4.1 Configuring V id eo Settings .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 11 A PPENDIX 2 P OR T M APPING ......................
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 12 Chapter 1 Sy st e m Re quir emen t Oper ating S yst em: Microso ft W indows XP SP1 and abov e ver sion / V ista / W in7 / Server 2003 / Server 2008 32bits CPU : Intel P entium IV 3.
User Manual of Network Camera 13 Chapter 2 Network C onnection Before you s tart: If you want to set the network camer a via a L AN (Local Area Network), please re fer to Se ction 2.1 Setting the Network Camer a over the L AN . If you want to set the network camera via a W AN (W ide Area Network), pl ea se re fer to Se ction 2.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 14 2.1.2 De tecting and Changing the IP A ddre ss You need the IP address to visit the network camera.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 15 2.2 Setting the Net work Camer a ov er the W AN Purpose: This section explains how to connect the networ k camer a to t he W AN with a s tatic IP or a dynamic IP .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 16 2.2.2 Dynamic IP Con nection Before you s tart: Please apply a dynamic IP from an ISP . W ith the dynamic IP addre ss, you can connect the network c amera to a modem or a r outer .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 17 Figure 2-7 Normal Domai n Name Re solution Steps: 1. Apply a domain name fr om a domain name provider . 2. Configure the DDNS settings in the DDNS Set tings interf ace of the network camer a.
User Manual of Network Camera 18 Chapter 3 Acce ss t o the Ne twor k Camer a 3.1 Accessi ng by W eb Browser s Steps: 1. Open the web browser. 2. In the address field, input the IP addre ss of the network camera , e.g., 19 2.0.0.64 and press the Enter key to enter the login interface.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 19 Figure 3-2 Downlo ad and Inst all Plug-in Figure 3-3 Ins tall Plug-in (1) Figure 3-4 Ins tall Plug-.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 20 Figure 3-5 Ins tall Plug-in (3) Note: You may h ave to close th e web browser to install the plug-in. Please reopen the web browser and log in again after installing the plug -in.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 21 Figure 3-6 iVMS-4 200 Live V iew Figure 3-7 iVMS -4200 Configura tion Pan el Note: F or detailed inf orma tion about iVMS-4200 client softw are, please ref er t o the user manual of the iVMS-4200 so ftware.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 22 4.1 Configuring Wi -F i Connection in Manage and Ad -hoc Modes Before you s tart: A wireless network must be configur ed . W ireless Connection in Manage Mode Steps: 1.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 23 If you choose the Ad -hoc mode, you don ’ t nee d to c onnect the wirele ss camer a via a rout er . The scenario is the same as yo u connect the camer a and the PC direct ly with a network c able.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 24 Y ou can choose the Security Mode as not – encrypte d, WEP , WP A-per sonal, WP A-ent erprise, WP A2-per sonal, WP A2-enter prise.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 25 WP A- en terprise and WP A2-enter prise Mode: Choose the type of client/server authent ication being used by the acce ss point; EAP -TLS or EAP - PEAP .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 26 4.2 Ea sy W i -F i Connection with WPS function Purpose : The setting o f the wirele ss network c onnection is never e asy . T o a void the comple x setting o f the wireless connection you c an enable the WPS function.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 27 If there is n ot a WPS button on the camera, y ou can also click the virtual button to enable the PBC function on the web in terface .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 28 Y ou can gener at e the PIN code on th e camer a side. And the expire d time for the PIN code is 120 secon ds. 1. Click 2. Enter the co de to the r outer , in th e ex ample, en ter 48167 581 to the ro uter .
User Manual of Network Camera 29 Chapter 5 Live V iew 5.1 Live V iew P ag e Purpose: The live video page allows you to view live video, c aptu re images, realize PTZ control, set/call presets and configure video parameters.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 30 pan/tilt unit has been ins talled ). Live View Parameters: Configure the image size and stream type of the live video.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 31 click to recor d the live video . The saving paths of th e capture d pictures and clips can be set on the Configur ation > Local Co nfigur ation page.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 32 Focus ne ar/far Iris open/ close Light on/ off W iper on/off One-t ouch focus Initializ e lens Adjus t speed of p an/ti lt movements 5.4.2 Sett ing / Calling a Pre set Setting a Preset: 1.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 33 Figure 5-4 Calling a Pr eset 5.5 Configuring Live V iew P ar amet er s Purpose: Y ou can select the st ream type and a djust the image siz e on the live view page.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 34 Figure 6-1 Loc al Configura tion Inter face 2. Con figure the fol lowing setti ngs: Live V iew Par amete rs : Set the pro tocol type and liv e view performance.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 35 pictures in playback mod e. Sav e clips to: Set the savi ng path of the clipped vi deo files in playback mod e. Note : Y ou can click to change the direct ory for saving the clips and pictures.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 36 Figure 6-3 T ime Sync by NTP Server Note : If the camera is connecte d to a p ublic network, you should use a NTP server that has a t ime synchr oniza tion function, such as th e server at the National T ime Center (IP Addr ess: 210.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 37 6.3 Configuring Network Set tings 6.3.1 Configuring T CP /IP Set tings Purpose: TCP /IP set tings must be pr operly configur ed bef or e you oper ate the camer a over network.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 38 3. Click t o save the above settings . Note : it will ask f or a re boot for the settings to tak e ef fect. 6.3.2 Configuring P ort Settings Purpose: Y ou can set the por t No.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 39 Figure 6-8 PPP oE Se ttings 2. Check the En able PPPoE checkbox to enable this feature. 3. Enter User Name , Password , and Confirm password for PPPoE access.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 40 3. Select DDNS Type . T hr ee DDNS types are selectable: HiDDNS, IPServer and DynDNS. DynDNS: Steps: (1) Enter Server Address of DynDNS (e.g. members.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 41 (2) Enter the Server A ddress www .hiddns.com. (3) Enter the Domain name o f the camer a. The domain is the same with the device alias in the HiDDNS server .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 42 Figure 6- 12 SNMP Set tings 2. Check the corresponding version checkbox ( , , ) to enable the feature. 3. Configure the SNMP settings. Note: The settings of the SNMP software should be the same as the settings you configure here.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 43 Configur ation > Adv anced Conf igurat ion > Network > 802.1X Figure 6- 13 802.1X Se ttin gs 2. C heck the En able IEEE 80 2.1X checkbo x to enable the f ea ture.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 44 3. Clic k to sav e the settings. Note : it will ask f or a re boot for the settings to tak e ef fect.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 45 6.3.9 Configuring UPnP ™ Set tings U niver sal Plug and Play (UPnP ™ ) is a networking architectur e that provid es compa tib ility among n e tworking equipment, softw are and other hardw are devices.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 46 3. Clic k to sa ve the set tings. 6.4 Configuring V ideo and Audio Set tings 6.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 47 Fram e Rate: Set the frame ra te to 1 / 16~25 fps. The f rame rat e is to describe the frequency at which the video stream is updat ed and it is measured by frames per second (fps).
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 48 Audio Encoding: G.711 ulaw , G.7 11alaw and G.72 6 are selectabl e. Audio Input: MicIn and Linein are selectable for the connecte d micro phone and pickup r espectively .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 49 1. En ter the Display Se ttings int erface: Configur ation > Basic Con figurat ion> Image > Display Settings Or Configur at ion > Adva nced Configur ation> Imag e > Display Se ttings 2.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 50 The mirror function enable s you to view another a spect of the image. Y ou c an flip the image horizon tally and vertically . It can be u se d to view the image in the wa y you see it directly using y our eye s.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 51 Y ou can cus tomize the camer a name and time on the scree n. Steps: 1. Enter the OS D Settings in terface : Configur ation > Adv ance d Configurat ion > Image > OSD Set tings Figure 6- 20 O SD Settings 2.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 52 6.5.3 Configuring T ext O verla y Set tings Purpose: Y ou can cus tomize the te xt overla y . Steps: 1. Enter the T ex t Overla y Setti ngs interf ace: Configur ation > A dvance d Configura tion > Image > T ext O verla y 2.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 53 3. Clic k . Figure 6- 23 Priv acy Mask Set tings 4. C lick and drag the mouse in the live vi deo window to dr aw the mask area. Note: Y ou a re allowe d to dr aw up to 4 are as on the same imag e.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 54 2. Click button to add a picture fr om your PC. 3. Click button to uploa d it. 4. Check the checkbox t o enable the function. X Coordinate and Y Coordina te value s are for the loca tion of the picture on the image.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 55 (2) Check the checkbo x of Enable Motion Det ection. Figure 6- 24 Enable Mo tion Detection (3) Click . Click and dr ag the mouse on the live video i mage to draw a motion detectio n area.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 56 Figure 6- 25 Arming T ime (1) Click to edit the arming schedule. The F igure 5- 28 shows the editing int erface of the arming schedule. (2) Choose the da y you wan t to se t the arming schedule.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 57 Y ou can specify the link age method when an even t occurs. The following cont ents ar e about how to c onfigure the dif fe rent types of lin k age method.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 58 Y ou can configure th e camer a to t rigger the alarm when t he lens is cov ere d and tak e alarm re sponse action .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 59 6.6.3 Configuring Ext ernal Al arm Input Steps: 1. En ter the Alarm Input Settings i nterf ace: Configur ation > A dvance d Configura tion> Ev ents > Alarm Input: 2.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 60 Figure 6- 30 Link age Method 6.6.4 Configuring Alarm Out put Steps: 1. En ter the Alarm Ou tput Setti ngs interf a ce : Configur ation>Adv anced Configur ation> E ven ts > Alarm O utput 2.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 61 Figure 6- 31 Alarm O utput Setti ngs 6.6.5 Hand ling Ex ception The ex ception type can be HDD f ull, HDD error , network disconnect ed , IP addr ess conflict ed and illegal login to the c ameras.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 62 6.6.6 Emai l Sending T riggere d by Alarm Purpose: The system can be configured to send an Email n otification to all des ignated receivers if a n alarm event is detected, e.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 63 And the SSL SMTP port is 465. Enable SSL: Check the checkbo x to enable SSL if it is require d by the SMTP server . A ttache d Image: Check the checkbox of A t tached Image if you wan t to send emails with a ttache d alarm images.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 64 details to con figure FTP p aramet ers. 2) Check the En able T iming Snapsho t checkbox. U pload ev ent -triggere d snapshots t o FTP Steps: 1) Con figure the FTP settings and check checkb ox in FTP Settings inte rface .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 65 Steps: 1. En ter the face detection se ttings int erface: Configur ation > A dvance d Configurat ion > Ev ents > Face De tection 2. Check the Enable Face D etection to check box to enable the function .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 66 Figure 6- 35 R emote Con trol Se ttings 2. Study the code of the remote c ontr ol or the wirele ss alarm.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 67 R emote Contr ol: Figure 6- 36 R emote Con trol Remo te Control Description: Sta tus Indicator Indicating the sta tus of the remo te; when you press the butt on on th e remote, the indicator flicks in r ed.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 68 T o s tudy the wirele ss alarms, e.g. the access control device, select W ireless Alarm f r om .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 69 Note: DS -2CD8464F-EI(Z)(W) camer a sup ports wireless audible and visual alarm as the wirele ss alarm output for the wireless alarm. Check t he ch eck box of W ireless audi ble and visual alarm to activ ate th e alarm output.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 70 Manual Alarm/Emergen cy Alarm Certain series o f c amer a su pport manual alar m by th e remote con trol. It can be manually t rigger ed and link ed to t he audio warning if any emerg ency happens.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 71 Y ou can also press the Arm/Disarm butt on on the remot e control to arm/disarm the camer a if the camer a has alr ea dy studied the r emote c ontr ol.
User Manual of Network Camera 72 Chapter 7 Stor age Set tings Before you s tart: T o configure rec ord se ttings, plea se mak e sure tha t you hav e the netw ork stor age device within the netw ork or the SD car d inserte d in your camer a.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 73 Figure 7-3 Initiali zing When the initializa tion complet ed, the sta tus of disk will become Normal. Figure 7-4 V iew D isk St atus Note s : U p to 8 NA S disks can be connected to the camer a.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 74 Figure 7-5 R ec ording Schedule In terface 2. Check the checkbox o f Enable Record Sche dule to enable sc hedule d reco rding. 3. Set the rec ord par amet er s of the camera.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 75 Figure 7-7 R ec ord Schedule 5. Choose the day to set th e record sc hedule. (1) Set all-day rec ord or segment recor d: If you w ant to c onfigur e the a ll -day rec ordi ng, please check the All Da y checkbox .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 76 Section 5.6.4 . Record T riggered by Motion & Alarm If you select Motion & Alarm , t he video will be rec orded when the motion and alarm are trigger ed a t the same time.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 77 Figure 7-8 E dit Rec ord Sched ule (3) Check the checkbox and click to copy set tings of this day to the whole week. Y o u can also check an y of the checkbo x es be for e the date and click .
User Manual of Network Camera 78 Chapter 8 Pla yback Purpose: This section explains how to view the remot ely recor ded video fi le s store d in the network disk s or SD cards. Steps: 1. Click on the menu bar to enter playback in terface. Figure 8-1 Pla yback Inter face 2.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 79 proce ss. Figure 8-3 Pla yback T oolbar Table 8-1 Description of the bu ttons Button Operation Butt.
User Manual of Network Camera 80 Chapter 9 Log Sear ching Purpose: The o per ation, alarm, ex ception and inf ormation of the camer a can be store d in log files. Y ou can also e xport the log files on y our demand. Before you s tart: Please c onfigure netw ork stor age f or the camer a or insert a SD card in the camera.
User Manual of Network Camera 81 Chapter 10 Other s 10.1 Managing U ser Accoun ts Enter the U ser Management in terface: Configur ation >Basic Con figurat ion> Security > U ser Or Configur at ion > Advance d Configur ation> Security > U ser The a dmin user has access to creat e, modify or delete other accounts.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 82 Figure 10-2 Add a U ser Modify a U ser Steps: 1. Left -click to select the user from the lis t and c lick . 2. Modify the U ser Name , Level or P assword .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 83 Delete a U ser Steps: 1. Left - cl ick the user name you w ant to delet e and click . 2. Click on the pop-up dialogue box to delet e the user . Figure 10-4 Delete a U ser Anonymous V isit 10.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 84 Enabling this function allows visit for whom doesn ’ t h a ve t he user name and passw ord of the device.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 85 Figure 10-8 IP Addr ess F i lter I nterf ace 2. Check the checkbox o f Enable IP Address F i lter . 3. Select the type of IP Addr ess F i lter in the drop -down list, Forbidden and Allowed are selecta ble.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 86 Figure 10- 10 Modify an IP (3) Click the bu tt on to finish modifying. Delete an IP A ddress Left -click an IP addr ess fr om filter list and click button.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 87 10.6 Maint enance 10.6.1 R ebooting the Camer a Steps: 1.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 88 start importi ng con figura tion file. Note : Y ou nee d to r eboot the camer a after importing configur ation fi le. 2. Clic k and set the saving path to save the configur ation fi le in local stor age .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 89 1. Enter R S-232 Port Setting int erface: Configur ation> Adv anced Configur at ion> Syst em .
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 90 Appendix Appendix 1 SADP So ftwar e Intr oduction Descripti on of S ADP V 2.0 SADP (Searc h Activ e Devices Protocol) is a kind of user -friendly and installa tion-free online d evice search tool.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 91 Note: Y ou can click or on each column heading to order the informa tion; you c an c lick to expa nd the device table and hide the network par ameter panel on the right side, or click to show the network par amet er panel.
Appendix 2 P ort Mapping The following setti ng s are for TP -LINK router (TL-R410) . The settings vary d epending on diff eren t models of ro uters. Steps: 1. Select the W AN Connection T ype , as s hown below: F igure A.2.1 Select the W AN Connection T ype 2.
User Manual of Network Camera © Hikvision Dig ital T echnology Co. , Ltd. All Rights R eserve d. 93 ports of another camera as 81, 8001, 555, 8201 with IP 192.168.1.24. R ef er to the ste ps as below: Note : The 8200 port changes with the 80 00 port with a constan t value of 200.
First Choice for Security Professionals.
Ein wichtiger Punkt beim Kauf des Geräts Hikvision DS-2CD7254FWD-EIZH (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hikvision DS-2CD7254FWD-EIZH noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hikvision DS-2CD7254FWD-EIZH - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hikvision DS-2CD7254FWD-EIZH reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hikvision DS-2CD7254FWD-EIZH erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hikvision DS-2CD7254FWD-EIZH besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hikvision DS-2CD7254FWD-EIZH verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hikvision DS-2CD7254FWD-EIZH. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hikvision DS-2CD7254FWD-EIZH gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
