Benutzeranleitung / Produktwartung ESCAPE-I35-C des Produzenten Heat & Glo LifeStyle
Zur Seite of 49
1 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Models: ESCAPE-I35-C ESCAPE-I35LP-C ESCAPE-I30-C ESCAPE-I30LP-C • DO NOT store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 2 Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: _____.
3 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury .
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 4 B. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc.
5 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 B. Limited Lifetime W arranty (continued) 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS: 7KLVZDUUDQWRQO.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 6 C. BTU Speci fi cations MODELS: ESCAPE-I30-C, ESCAPE-I30LP-C, ESCAPE-I35-C, ESCAPE-I35LP-C LABORA TOR Y : Underwriters Laboratories, Inc. (UL) TYPE: V ented Gas Appliance Heaters STANDARD: ANSI Z21.
7 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 2 2 Operat ing Instruc tions Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate fi replace before read- ing and understanding operating instructions.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 8 D. Clear Space W ARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth.
9 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 H. IPI Battery T ray/Battery Installation The IntelliFire Plus TM system has a battery backup option. Battery longevity and performance will be affected by the service temperatures of this appliance.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 10 J. Before Lighting Fireplace Before operating this fi replace for the fi rst time, have a quali fi ed technician: • V erify all shipping materials have been removed from inside and/or underneath the fi rebox.
11 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 K. Lighting Instructions (IPI) 1. This appliance is equipped with an ignition device which automatically lights the burner. DO NOT try to light the burner by hand. 2. Wait fi ve (5) minutes to clear out any gas.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 12 Initial Break-in Procedure • The appliance should be run three to four hours continuously on high. • T urn the appliance off and allow it to completely cool. • Remove fi xed glass assembly .
13 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with care.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 14 V enting Frequency: Seasonally By: Homeowner T ools needed: Protective gloves and safety glasses. • Inspect venting and termination cap for blockage or obstruction such plants, bird nests, leaves, snow , debris, etc.
15 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Figure 3.1 IPI Pilot Flame Patterns Burner Ignition and Operation Frequency: Annually By: Service T echnician T ools needed: Protective gloves, vacuum cleaner , whisk broom, fl ashlight, voltmeter , indexed drill bit set, and a manometer .
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 16 A. T ypical Appliance System NOTICE: Illustrations and photos re fl ect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale.
17 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 B. Design and Installation Considerations Heat & Glo gas inserts are designed for installations into solid fuel masonry or factory built fi replaces that have been installed in accordance with the National, Provin- cial, State and local building codes.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 18 5 5 F ireplace Size Requirements A. Minimum Fireplace Opening Minimum fi replace opening requirements are shown in Figure 5.2. W ARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access.
19 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Figure 5.2 Fireplace Opening In addition to these dimensions, also reference Clearances and Mantel Projections (Section 5.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 20 B. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as speci fi ed. Framing or fi nishing material closer than the minimums listed must be construct- ed entirely of noncombustible materials (i.
21 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 A. V ent T ermination Minimum Clearances Roof Pitch H (Min.) Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .............
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 22 7 7 Installation Preparation Prepare the existing solid fuel masonry or factory built non-combustible fi rebox for installation.
23 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 B. V enting Components CAUTION! Risk of Cuts/Abrasions/Flying Debris. Wear protective gloves and safety glasses during instal- lation.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 24 C. Connecting V ent Pipe Reference instructions in the termination kit. • Install the 3-inch fl exible vent pipe(s) down through the chimney .
25 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 W ARNING! Risk of Fire! Only an approved Hearth & Home T echnologies surround may be used to cover inte- gral grills on solid fuel burning fi replaces. No other com- ponents such as shrouds, sheetmetal plates, etc.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 26 E. Installing Adaptor and T ermination Cap CAUTION! Risk of Cuts/Abrasions/Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp.
27 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a quali fi ed technician (NFI certi fi ed or factory-trained) using Hearth & Home T echnologies speci fi ed and approved parts.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 28 A. Wiring Requirements NOTICE: This appliance must be electrically wired and grounded in accordance with local codes or , in the absence of local codes, with National Electric Code ANSI/NFP A 70-latest edition or the Canadian Electric Code CSA C22.
29 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 E. Optional Accessories T o connect optional accessories, the supplied cord as- sembly should be used. See Figures 10.2 and 10.3 for optional accessories. W ARNING! Risk of Shock! Label all wires prior to dis- connection when servicing controls.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 30 Figure 10.3 Fan Wiring Diagram Note: if any of the original wire as supplied with the applianc e must be replaced, it mus t be replaced with t ype 105 °C r ated wire.
31 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 A. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as speci fi ed. Framing or fi nishing material closer than the minimums listed must be construct- ed entirely of noncombustible materials (i.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 32 A. Remove Glass Assembly See Section 12.I. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox. Remove metal panels covering electrical compo- nents on sides of appliance.
33 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 G. Ember Placement W ARNING! Risk of Explosion! Follow ember placement instructions in manual. DO NOT place embers directly over burner ports. Replace ember material annually .
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 34 H. Install the Log Assembly Log Set Assembly: LOGS-I30FB Models: ESCAPE-I30-C, ESCAPE-I30FB CAUTION: Logs are fragile, handle with care. Figure 1. Log Set Installed Figure 2.
35 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Log #3 (SRV2201-704) : See Figure 2 for additional details. Locate the log slot on the bottom right end of Log #3. Mate the log slot with the left log pin. Rotate the left end of the log counterclockwise, until it contacts the grate tine.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 36 2201-935E Figure 8. Place Log #5 Figure 9. Place Log #6 GLASS ROCK (2201-853): Once Log #3 and Log #4 are installed, fi ll each light tray with the glass rock. See Figure 7.
37 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 H. Install the Log Assembly Log Set Assembly: LOGS-I35FB Models: ESCAPE-I35FB, ESCAPE-I35FB-LP ESCAPE-I35-C, ESCAPE-I35LP-C CAUTION: Logs are fragile, handle with care. Figure 1.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 38 Log #3 (SRV2202-704) : See Figure 2 for additional reference details. Locate the log slot on the bottom right end of Log #3. Mate the log slot with the left log pin. Rotate the left end of the log counterclockwise, until it contacts the grate tine.
39 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 2202-935D Figure 8. Place Log #5 Figure 9. Place Log #6 Log #5 (SRV2202-705): See Figures 2 and 3 for additional references. Place the thick end of Log #5 on the fl at spot of Log #1.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 40 J. Air Shutter Setting Air shutter settings should be adjusted by a quali fi ed ser- vice technician at the time of installation. The air shutter is set at the factory for minimum vertical vent run.
41 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 1 3 13 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 42 T roubleshooting (continued) Symptom Possible Cause Corrective Action 4. Pilot lights but con- tinues to spark, and main burner will not ignite. (If the pilot continues to spark after the pilot fl ame has been lit, fl ame recti fi cation has not occurred.
43 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 1 4 14 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 44 B. V ent Kits Components Direct V ent Flex Liner Kits (see Figure 14.2) LINK-DV30B: Masonry 3 inch fl ex liner kit. Expands to 30 feet. Includes: two liners, termination cap, fl ashing, and link adapter .
45 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 C. Service Parts ESCAPE-I30-C Beginning Manufacturing Date: Aug 201 1 Ending Manufacturing Date: ______ 30” FireBrick Insert Log Set Assembly IMPORT ANT : THIS IS DA TED INFORMA TION.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 46 C. Service Parts ESCAPE-I35-C Beginning Manufacturing Date: Aug 201 1 Ending Manufacturing Date: ______ 35” FireBrick Insert IMPORT ANT : THIS IS DA TED INFORMA TION.
47 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 C. Service Parts ESCAPE-I30-C, ESCAPE-I35-C Beginning Manufacturing Date: Aug 201 1 Ending Manufacturing Date: ______ #15 V alve Assembly 14.2 14.3 14.4 14.6 14.5 14.7 14.8 14.
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 48 C. Service Parts ESCAPE-I30-C, ESCAPE-I35-C IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number .
49 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Heat & Glo, a brand of Hearth & Home T echnologies Inc. 7571 215 th Street West, Lakeville, MN 55044 www .heatnglo.com D. Contact Information Please contact your Heat & Glo dealer with any questions or concerns.
Ein wichtiger Punkt beim Kauf des Geräts Heat & Glo LifeStyle ESCAPE-I35-C (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Heat & Glo LifeStyle ESCAPE-I35-C noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Heat & Glo LifeStyle ESCAPE-I35-C - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Heat & Glo LifeStyle ESCAPE-I35-C reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Heat & Glo LifeStyle ESCAPE-I35-C erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Heat & Glo LifeStyle ESCAPE-I35-C besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Heat & Glo LifeStyle ESCAPE-I35-C verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Heat & Glo LifeStyle ESCAPE-I35-C. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Heat & Glo LifeStyle ESCAPE-I35-C gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
