Benutzeranleitung / Produktwartung S_ST55F_UM_US_V01_H des Produzenten HANNspree
Zur Seite of 53
S_ST55F_UM_US_V01_H 55” Liquid Crystal Display T elevision Téléviseur à Écran à Cristaux Liquides TV de Pantalla de Cristal Líquido.
Table of Contents 1 English Regulatory Information ... ..................................................... ........ 3 Description of Warning Sy mbols ....................... .............. ............. 4 Safety Notices .............. ..............
Table of Contents 2 English 3. Adjusting On-Screen Display (OSD ) Settings ........... ............... 3 0 3.1 OSD Setting Menus ... ............................................... ....... 3 1 3.2 Adjusting Picture Settings ...................... ....
3 English R e gula tor y Infor mation FCC Compliance Stat ement 1 This device complies with part 15 of the F CC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any in terference received, including interference that may cause undesired operation.
4 English Description of W ar ning Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WA R N I N G This symbol is us ed to alert users to pay attention to import ant descriptions regarding usage, maintenance (repair), and additional important information related to this TV .
5 English Saf ety Notices Inst allation Safety Notes Location Avoid allowing the TV to get prolonged expo sure to sunlight or other strong sources of heat. Leave sufficient di stance between the TV and the wall to provide enough space for the emission of heat.
6 English Impor tant Safety Instr uctions 1. 2. 3. 4. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
7 English 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
8 English Personal safety Installation 1. T o avoid overloadi ng the power supply , never plu g too many electrical devices into an outl et, power strip, or ext ension cable. 2. Dangerous high-voltage electric power component s are located inside the TV .
9 English Preface Thank you for purchasing a Hannspree Liquid Crystal Display T elevision (LCD TV). Y our new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology . Please carefully read this manual in it s entirety before setting up, using or operating your TV .
10 English Recycling Infor mation We care very much about our environment pr otection strategy and firmly be lieve that it helps us have healthier earth via appr opriate treatment and recycling of industrial technology devices at the end-of-life.
11 English T rademark Notice Hannspree products incorporate High-Definition Multimedia Interface (HDMI™) technology . HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. License Notice and T rademark Acknowl edgment Manufactured under license from Dolby Laboratories.
12 English 1 Getting Star ted 1.1 P ackage Cont ents Make sure the following co mponents are included in the box. Please contact Hannspree Customer Service immediate l y if anything is missing or damag ed.
13 English 1.2 Introducing the TV Y ou can watch NTSC /A T SC broadcast, cable, or digi tal television channels, and easily connect a VCR, set-top box, or DV D player to the stan dard CVBS, S-V ideo, component, and HDMI inpu t ports (locatio n of these ports depends on model).
14 English 1.3 Control Panel Description Bu tton Function Power Power button. Press to turn the T V on or off. Input source INPUT Press to open the input source list or mark an item on the OSD menu. Menu MENU Press to open the OSD menu. Channel select Press to increase the channel number or move upward to the previous item o n the OSD menu.
15 English 1.4 Input and Output Jac ks Description Connector Fun ction Power connector Connect to the included power cord. Cable/ Antenna Connect to an ante nna or cable TV . HDMI 1 input Connect to an external device, such as a DVD player , set-top box, or a PC’s DVI/ HDMI port.
16 English USB Support JPEG and MP3 files. S-Video 1 input Connect to an external device, such as a VCR, set-top box, or a DVD player . Composite input (video) Connect to an external device, such as a VCR, set-top box, or a DVD player . Composite input (audio) Connect to an external device, such as a VCR, set-top box, or a DVD player .
17 English 1.5 R emote Control Descripti on Icon Function Power Press to turn the TV on or off. Input source INPUT Press to open the input source list. Keypad Use to select a channel directly . Press 0-9 to enter the program numbers (press 1 and 0 for channel 10).
18 English Sleep timer Press repeatedly to set the sleep time (Sleep off, 15, 30, 45, 60, 90, or 120 minutes). A Sleep Info appears on the middle of the screen to show the remaining time. Cancel the timer by pressing th e button to sleep off mode. Mute Press to eliminate audio.
19 English Play Press to st art playing. S top Press to stop playing. Previous Press to skip to the previous section. Rewind Press to go backwards. Fast-forward Press to go forwards.
20 English 1.6 Inser ting the R emote Contr ol Batteries 1 Open the battery compartment cover at the back of the remot e control. 2 Insert the batteries paying attention to the polarity markings inside the battery compartment. 3 Close the battery compartment cover .
21 English Note: • For best result s, use the remote control withi n a proper dist ance from the front of the TV . Do not exceed an angle of 30 degrees when pointing at TV. • The operational distance may be shortened when the sign al sensor is directly exposed to strong light.
22 English 2 Setting up your TV 2.1 Basic Connections 2.1.1 P ower Connection 1 Connect the p ower cord t o the AC I N input jack on the r ear of the TV .
23 English 2.2 Connecting Exter nal De vices Connect external devices such as VCRs, set-top box, DVD players, video game consoles, earphones, or a PC to the T V usin g the appro priate ports on the rear of the TV . 2.2.1 Connecting Exter nal Ear p hones Note: • External speakers or headphones are not included with the TV .
24 English 2.2.2 Connecting to A V Devices HDMI 4 or or or A B HDMI IN AUDIO VIDEO P R P B RL Y Y L R HDMI P R P B C S-VIDEO RL VIDEO S-VIDEO 1 R-AUDIO-L VIDEO 1 2 3 Audio Cable (Optional) Video Cable.
25 English 2.2.3 Connecting a VCR/ Set-top bo x/ DVD Play er Using Video Input s Connect the TV to a VCR/set-top box/ DVD player using the video inputs.
26 English 2.2.4 Connecting a PC using V GA Connect the TV to your PC to use it as the monitor using the VGA port as shown. 1 Connect the VGA port of the TV to the VGA outp ut of the PC. 2 Connect the PC LINE IN port of your TV to the line out port of the PC to listen to audio from the PC.
27 English 2.2.6 Connecting HDMI HDMI (High Definition Multimedia Interfa ce) assures that the best video signal is always sent from source to the TV . Refer to the following illustration to connect an HDMI device to t he TV . 2.2.7 Connecting USB Connect the USB flash drive to the TV us ing the USB port as shown.
28 English 2.3 Usi ng the TV 2.3.1 T ur ning the TV On a nd Of f 1 Press on the control panel or r emote control. Th e power LED ind icator on the TV chan ges from red to gree n, indicati ng that the TV is on. 2 Press again. The p ower LED changes from green to red, i ndicating tha t the TV i s off .
29 English 2.3.5 Adjusting the V olume 1 Press VOL+ on the control panel or on the remote control to increase the volume . 2 Press VOL- on the control panel or on the remote control to decrease the volume. 3 Press to eliminate sounds, and press again or pr ess the vol ume buttons to restore the original vo lume.
30 English 3 Adjusting On-Screen Display (OSD) Settings The On-Screen Di splay (OSD) menu system provides a quick and simple meth od to adjust the TV settings. The OSD menu ca n be accessed through the butto ns either on the control panel or the remote control.
31 English 3.1 OSD Setting Menus Follow the instructions indicated on the bottom of the OSD Function Me nu. Press / on the control panel or / arrow keys on the remote control to scroll through the menus. Press INPUT on the control p anel or OK key on the remo te control to select an item and then press MENU key to exit the OSD menu.
32 English 3.3 Adjusting Audio Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the control panel to sele ct Audio men u. 3 Press / OK on the remote control or INPUT on the control panel to enter the Audio men u.
33 English 3.4 Adjusting Channel Settings 1 Press MENU to enter the OSD Main Me nu screen. 2 Press / on the remote control or CH S / CH T on the contro l panel to select Channel menu . 3 Press / OK on the remote control or INPUT on the control panel to enter the Channel menu .
34 English 3.5 Adjusting V -CHIP Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the contro l panel to select V -CHIP menu. 3 Press / OK on the remote control or INPUT on the control panel to enter the V - CHIP menu.
35 English 3.6 Adjusting Setup Settings 1 Press MENU to ente r the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the control panel to select Setup m enu. 3 Press / OK on the remo te control or INPUT on the control panel to enter the Setup m enu.
36 English 4 T r oubleshooting Situation Solution No picture and sound. • Connect the power cord pro perly . • Check if the power LED is on or not. • Press on the control panel or remote control. • Press INPUT to cycle through connected video sources.
37 English 5 Specifica tions LCD Panel Size 55 inch TFT Screen Format 16:9 Panel Resolution 1920 (H) x 1080 (V) Refresh Rate 120 Hz TV System AT V : N T S C DTV : A TSC Video System A V (CVBS) x2 S-Vi.
38 English PC Mode Support T iming Video Mode Support Timing Mode Resolution (active dot) Horizontal Frequency (KHz) V ertical Frequency (Hz) Nominal Pixel Clock (MHz) VGA DVI to HDMI VGA 640x480@60Hz 31.469 59.941 25.175 V V SVGA 800x600@60Hz 37. 879 60.
39 English 6 Ap pendix: R emote Contr ol Guide 6.1 Introd uction The electronic equipment type switch buttons are used for switching the current electronic equipment type on the remote control. The remote control includes 4 electronic equipment types: DVD, AUDIO, CABLE and TV .
40 English 6. During the setting process, only digit keys ‘0’ throu gh ‘9’ are valid inputs, while other buttons are deemed invalid and do not affect the code setting. F or example, inputting “02” the n pressing RETURN does a ffect the “02” already input.
41 English 6.1.4 Setting V olume Lock Operating procedures are as follows: 1. Press the corresponding electronic equipment bu tton. The indica tor light wi ll come on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on again, showing that the se tting mode has been entered.
42 English perform this unlock operation, while t hose electronic equ ipment modes not so operated still have channel locked up). The indicator light then goes off and setting mode is exited. 4. During the setting process, releasing th e electronic equip ment button exits the setting mode immediately without ch anging the status prior to setting.
43 English 6. Default volu me lock setting: 7. Default cha nnel lock setting: Electro nic equipment VOL+, VOL- and Mute Note TV T ransmit TV code Provided by manufacturer CABLE T ransmit CABLE code Un.
44 English 6.1.7 Description There is no multi-function co de setting ope ra tion under TV mode but a fixed code for the TV manufacturer . Therefore, co de se tting and code-sea rching functions are disabled under this mode; other functions su ch as volume lock, ch annel lock and code display are operable .
45 English 6.3 Component Prog r am Codes Setup Code f or V CR’ s ABC 2102 Admiral 2012, 2022 Aiko 2025 Aiwa 2005, 2027 Alienware 2102 America Action 2025 American High 2004 Amoisonic 2027 Anam 2020,.
46 English Setup Code f or V CR’s Magnin 2024 Marantz 2004, 2016 Marta 2005 Matsushita 2 004, 2020 Media Center PC 2102 MEI 2004 Memorex 2004, 2020, 2005, 2012, 2007, 201 1, 2024, 2017, 2022, 2027 M.
47 English Setup Code f or V C R’s T ashiko 2005 Ta t u n g 2010, 2014 T echnics 2004, 20 20 Te c o 2004, 2005 2012, 2006 T eknika 2004, 20 05 Tiv o 2048, 2044, 2098, 2059 TMK 2024 To s h i b a 2010.
48 English Setup Code f or D VD’ s Norcent 2078 Onkyo 2029, 2046, 2064 Oritron 2051 Panasonic 2028, 210 1 Philips 2029, 2036, 2050 Pioneer 2033, 2039 Polarold 2090, 2086 Polk Audio 2036 Portland 206.
49 English Setup Code f or Cable Regal 0016, 0014 Runco 000 1 Samsung 0001, 0010 Scientific Atlanta 0059, 0037, 0020, 0003 Sony 0041 S tarcom 0002, 00 06 Supercable 0015 Supermax 0038 T ocom 0005 To r.
50 English Setup Code f or CD Carver 3019, 3022 Dkk 3001 DMX Electronics 3019 Dynam ic Bass 3022 Fisher 3022 Garrard 3027 Genexxa 3005 Harman/ Kardon 3019, 3020 Hitachi 3005 Integra 3013 JVC 3009 Kenw.
51 English Setup Co de for Audio Amp / T uner’s Carver 3042 Denon 3051, 3040 Fonmix 3051 Harman/ Kardon 3014 Hitachi 3047 Integra 3017 JBL 3014 JVC 3010 Kenwood 3050, 3056 KLH 3053 Magnavox 3042, 30.
52 English 7 Setting the TV on the Wall Dissembling the stand base: 1 Disconnect all the cables and cords from the TV to prevent breakage. 2 Carefully place the TV face down on a so ft and flat surface (b lanket, foam, cloth, etc) to prevent any damage to the TV .
Ein wichtiger Punkt beim Kauf des Geräts HANNspree S_ST55F_UM_US_V01_H (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HANNspree S_ST55F_UM_US_V01_H noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HANNspree S_ST55F_UM_US_V01_H - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HANNspree S_ST55F_UM_US_V01_H reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HANNspree S_ST55F_UM_US_V01_H erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HANNspree S_ST55F_UM_US_V01_H besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HANNspree S_ST55F_UM_US_V01_H verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HANNspree S_ST55F_UM_US_V01_H. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HANNspree S_ST55F_UM_US_V01_H gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
