Benutzeranleitung / Produktwartung ST40-12A1 des Produzenten HANNspree
Zur Seite of 56
.
Table of Contents 1 1. Warranty .................................................................. ..... 3 2. Preface ..................................................... .................... 4 3. Description of Warning Symbols ......................
Table of Contents 2 11. Adjusting On-Screen Display (OSD) Settings ............... 3 0 OSD Setting Menus ................. ................................ 3 0 Picture Setting ......................................................... 3 1 Brightness ..
3 The instructions on this manual are for the model(s) listed on the front cover . Before you sta rt reading, check your product number by looking at the rear of your TV .
4 This manual is designed to assist us ers in setting up and using the LCD TV . Information in this document has been carefully checked fo r accu- racy; however , no guarantee is given to the correctn ess of the content s. The information in this document is subject to chang e without notice.
5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connect s to ground; do not r emove it.
7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual ca refully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in case the pr oduct needs to be shipped in the future.
8 Optimal V iewing Area 128 cm 1 1.
9 Import ant Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this appara tus near water . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings.
10 10. Protect the power cord from being walked on or pinched particularly at th e plug, conve- nience receptacles, and the point where they exit from the app aratus. 1 1. Use only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus.
11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo - nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
12 Inst allation T o avoid damage to power circuit s, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far from p ower trans- mission lines to av oid possible danger .
13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoi d using any other power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
14 FCC Compliance S tatem ent 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and ( 2) this devi ce must accept any inte rference received, including inter ference that may cause undesired operation .
15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for rad io noise emissions from digital app aratus as set ou t in the Radio Interference Regulations of the Canadian Dep artment of Communication s.This device complies with Canada ICES-003 Class B.
16 Thank you for purchasing this Liqu id Crystal Display TV. Y our TV is designed to be safe, versatile, and easy to use. The spinika design ma kes it a fun add ition to any room.
17 Make sure the following componen ts are inclu ded in the box. Cont act your vendor immediately if anything is missing or damaged. TV User ’ s Manual Quick St art Guide W arranty and Service Manua.
18 F r ont V iew Description Function 1 Source Selects the input source to be displayed ( T V, AV 1 , o r AV 2 ) . 2 Select channel Channel up (CH S ): Increases the channel number . Channel down (CH T ): Decreases the channel numb er . 3 Menu T urns the on-screen display (OSD) menus on and of f.
19 5 Power T urns the TV on and off. 6 Power LED Green LED indicates power on. 7 Signal sensor Point the remote control at this sensor . 8 Headphone line out Connects to h eadphones.
20 Input and Output P or ts Description Function 1 AV 2 Use the included 4 -in-1 Audio/ Vide o cable to connect exte rnal devices, such as a VCR, VCD, or DVD player . Audio Input: A V connectors white and red audio cables. Video Input: A V connector video (yellow) or S-Vid eo cables.
21 2 AV 1 Use the A V1 input to connect an external device, such as a VCR, or a VCD, or DVD player . Audio Input: A V connector white and red audio cable s. Video Input: A V connector video (yellow) cable. 3 DC-IN Connects to the included power adapter .
22 Co nnecting to an Anten na or Cable TV 1 Connect one end of the VHF/UHF (Ant enna) or CA TV cable to the ANT Jack (VHF/UHF IN Jac k) on the back of the TV . 2 Connect the other en d of the VHF/ UHF (Ante nna) or CA TV cable to the Antenna or CA TV socket.
23 Connecting to A V De vices Connect external devices such as VC D/DVD players or VCRs to the TV using the A V 1 and A V2 ports on t he back of the TV . Connecting to a VCR, VCD or DVD Player The illustration presented here shows you how to connect your TV to a VCR, VCD or DVD play er .
24 Connecting to a Video Camera The following illustration shows you how to c onnect the TV to a camcorder . Actual connections may vary accordin g to the make and model of the device. Refer to the user’s manual included with the camcord er for more detailed instructions.
25 Connecting Headphones Headph ones may be used to listen to the TV instead of using the built-in speakers. Connect headp hones to the head phone line out port as illustrated. Notes • Headphones are not included with the product. • The internal TV speakers will not outp ut sound when headphones are plugged in .
26 Connecting the P ower Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power ad apter connector into the DC-IN on the r ear panel o f the TV . 3 Plug the three-pronge d plug at the other end of the power cord into a power outlet.
27 Using the Remote Co ntrol For best results, use the remote contr ol within a distance of 5 meters (16 feet) from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when pointing at the signal sensor . Refer to the following illustration.
28 T ur ning the TV On and Of f 1 Press the POWER button on the remote control or on the T V control panel. The power LED indicator o n the front of the TV c hanges from red to green, indicating that the power is on. 2 Press the POWER button again. The power LED changes from green to red, indicating that the TV is in standby (of f) mode.
29 Switching Source Signals Press the SOURCE button to select different source signals. CH, A V1, and A V2 appear on the top r ight corner of the screen in that order . Note The TV supports S-V ideo input in addition to normal video and audio signals.
30 The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV's settings. T his chapter describes how to change each of the available settings. The OS D can be used with either the front control panel or remote control .
31 Note Y ou can operate the OSD with either th e remote control or the front pan e l control. Picture Setting Press MENU to enter the OSD Main Menu screen.
32 Brightness 1 Press the VOL UP button. The brightness slide bar appears. 2 Press the VOL UP button to increase the brightness. 3 Press the VOL DOWN button to decrease the brightne ss. 4 Press MENU to confirm the setting and return to the Picture Menu.
33 Contrast 1 Press the CH DOWN button to select CONTRAST . 2 Press the VOL UP button. The contrast slide bar appears. 3 Press the VOL UP button to increase the contrast. 4 Press the VOL DOWN button to decrease the contrast. 5 Press MENU to confirm the se tting and return to the Picture Me nu.
34 Sharpness 1 Press the CH DOWN button to select SHARPNESS. 2 Press the VOL UP button. The sharpness slide bar appears. 3 Press the VOL UP button to increase the sharpness. 4 Press the VOL DOWN button to decrease the sharpness. 5 Press MENU to confirm the setting and return to the Picture Menu.
35 Hue 1 Press the CH DOWN button to select HUE. 2 Press the VOL UP button. The hue slide bar appears. 3 Press the VOL UP button to increase the hue toward the g reen end of the spectrum. The image becomes more green. 4 Press the VOL DOWN button to decrease the hue toward the red end of the spectrum.
36 Saturation 1 Press the CH DOWN button to select SA TURA TION. 2 Press the VOL UP button. The saturation slide bar appears. 3 Press the VOL UP button to increase the satur ation. 4 Press the VOL DOWN button to decrease the saturation. 5 Press MENU to confirm the setting and return to the Picture Menu.
37 Color 1 Press the CH DOWN button to select COLOR. 2 Press the VOL UP button. The current setting appears blinking in the brackets. Neutral Color Press the VOL UP button to select NEUTRAL, then pre ss MENU . “NEUTRAL” appears in the brackets. W arm Color Press the VOL UP button to select W ARM, then press MENU .
38 Preset 1 Press the CH DOWN button to select PRESET . 2 Press the VOL UP button. “OK” appears in the bra ckets. All picture settings are returned to the factory- set default values.
39 Note Y ou can operate the OSD with either th e remote control or the front panel control. Audio Setting Press MENU to enter the OSD Main Menu screen. 1 Press the CH UP / DOWN button to select AUDIO. 2 Press the VOL UP button to enter the Audio Menu.
40 Tr e b l e 1 Press the VOL UP button. The treble slide bar a ppears. 2 Press the VOL UP button to increase the treble. 3 Press the VOL DOWN button to decrease the treble.
41 Bass 1 Press the CH DOWN button to select BASS. 2 Press the VOL UP button. The bass slide bar appears. 3 Press the VOL UP button to increase the bass. 4 Press the VOL DOWN button to decrease the bass. 5 Press MENU to confirm the se tting and return to the Audio Menu.
42 Balance 1 Press the CH DOWN button to select BALANCE. 2 Press the VOL UP button. The balance slide bar appears. 3 Press the VOL DOWN button to shif t the balance to the lef t speaker . 4 Press the VOL UP button to shift the balance to the right speaker .
43 Enhance Preset 1 Press the CH DOWN button to select ENHANCE. 2 Press t he VOL UP button to enter the setting field. 3 Press t he VOL UP button to turn enhance on or of f. 4 Press MENU to confirm your choice. 1 Press the CH DOWN button to select PRESET .
44 Note Y ou can operate the OSD with either th e remote control or the front panel control. TV Setting Press MENU to enter the OSD Main Menu screen. 1 Press the CH UP / DOWN button to se lect TV .
45 TV/CA TV Press the VOL UP button. The current setting appears flashing in the brackets . Receiving Cable TV Press the VOL UP button to select CA TV , then press MENU . “CA TV” appears in the brackets. Receiving Broadcast TV Press the VOL UP button to select TV , then press MENU .
46 Channel Add/Erase 1 Press the CH DOWN button to select CH ADD/ERASE. 2 Press the VOL UP button. The OSD menu display switches to the following screen. Press the CH UP / CH DOWN button on the front panel to select a channel. Add Channel Then press t h e VOL UP on the front panel bu t to n to add the selected channel.
47 Auto Program . 1 Press the CH DOWN button to select AUTO PROGRAM. 2 Press the VOL UP button to begin auto programming. The screen displays channels incrementally as the TV scans for available channels.
48 Note Y ou can operate the OSD with either th e remote control or the front panel control Customize Setting Press MENU to enter the OSD Main Menu screen. 1 Press the CH UP / DOWN button to sele ct CUSTOMIZE. 2 Press the VOL UP button to enter the Customize Menu.
49 Sleep Timer The sleep timer turns the TV of f automatically after a set time. 1 Press the VOL UP button to select a value: OFF , 30, 60, 90, or 1 20 minutes. 2 Press MENU to confirm your choice. Y ou can also press SL EEP on the remote control to select 30, 60, 90 or 120 minutes.
50 OSD Timeout This setting allows you to set the length of time the OSD menus appear on the screen when a button is n ot pressed. Language 1 Press the CH DOWN button to select OSD TIMEOUT . 2 Press the VOL UP button. The current setting appears flashing in the brackets.
51 T urn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprint s from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid damaging the finish.
52 Situation Solution No picture and soun d. • Connect the power cord properly . • Press the POWER button on the con- trol panel or remote control. • Press the SOURCE button to cycle through connected video sources. • Press the Channel up or Channel down button to switch to other TV stations.
53 Cannot operate me nus. • If OSD items are colored light blue, the system is in a state such that those settings are not available. For example, video setting is available in TV mode. No image but have sound. • Make sure the video signal cab le is connected properly .
54 ST40 -12A1 LCD Panel Size 12.1-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizont al) x 600 (vertical) Maximum Display Area 246.0 mm (H) x 184.
55 Aspect Ratio The ratio of width to height of a film, image or display screen. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T e levision, the original name for cable TV .
Ein wichtiger Punkt beim Kauf des Geräts HANNspree ST40-12A1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HANNspree ST40-12A1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HANNspree ST40-12A1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HANNspree ST40-12A1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HANNspree ST40-12A1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HANNspree ST40-12A1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HANNspree ST40-12A1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HANNspree ST40-12A1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HANNspree ST40-12A1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
