Benutzeranleitung / Produktwartung LT13-23A1 des Produzenten HANNspree
Zur Seite of 81
NTSCTVTWEN0804 MAC-001226 User's Manual 23" Liquid Cr ystal Display T ele vision L T13-23A1 2F , No.362, Ruei-Guang Rd., Neihu District, T aipei City 1 14, T aiwan, R.
Table of Contents 1 1. Warranty and Service .................................................... 4 2. Preface .................................................................... ..... 5 3. Description of Warning Symbols ..............................
Table of Contents 2 11. Adjusting On-Screen Display (OSD) Settings ............ ... 3 9 OSD Setting Menus ................. ................................ 3 9 Picture Settings ..................................... .................. 4 0 Brightness .
Table of Contents 3 Wide ................................................................ ... 6 9 Language ........................................................... 6 9 Sleeper ............................................................... 7 0 Time .
4 The instructions on this manual are for the model(s) listed on the front cover . Before you st art reading, check your product number by lookin g at the rear of your TV .
5 This manual is designed to assist us ers in setting up and using the LCD TV . Information in this document has been carefully checked for accu- racy; however , no guarantee is given to the correctness of the content s. The information in this document is subject to chang e without notice.
6 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
7 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connect s to ground; do not r emove it.
8 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual ca refully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in case the pr oduct needs to be shipped in the future.
9 Optimal V iewing Dist ance 250 c m P O W E R V O L U M E S O U R C E C H A N N E L.
10 Import ant Safety Instructio ns Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water . Clean only with a dr y cloth. Do not block any ventilation openings. Inst all in accordance with the manuf acturer ’s instr u ctions.
11 Protect the power cord from being walked on or pinched, particularly at the plug, convenience receptacles, and the point wh ere they exit from the app aratus. Use only with a cart, stand, tripod, bracket, or table spe c ified by the man ufacturer , or sold with the appar atus.
12 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo - nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
13 Installation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far from p ower trans- mission lines to av oid possible danger .
14 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho c k or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
15 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and ( 2) this devi ce must accept any interference received, including inter f erence that may ca use undesired oper ation.
16 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for radio noise emissions from digital app aratus as set out in the Radio Inte rference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B.
17 Thank you for purchasing this Liqu id Crystal Display TV. Y our TV is designed to be safe, versatile, and easy to use. It s sturdy design makes it a decorative addition to you r living room.
18 F eatures • 23-inch color TFT LCD TV • Safe, sturdy const ruction • Built-i n dual TV tuner • Audio/video suppo rt: – S tereo audio input s – Composite video inputs – Component video input – S-Video inputs – 3.
19 Make sure the following component s are included in the box. Cont act your vendor immediately if any thing is missing or damaged. TV User ’ s Manual Quick St art Guide W arranty and Service Manua.
20 F r ont View Contr ols Description Function 1 Power button and LED T urns the TV on and off. Th e green LED indicates power on. In PC mode, amber light indicat es sleep status. 2 Adjust volume Press the S button to increase the volume. Press the T button to decrease the volume.
21 3 Infrared sensor Point the remote contr ol towards the sensor to operate the TV . 4 Select channel Changes the channel. Press S to increase the channel n umber . Press T to decrease the channel number . These buttons are also use d to navigate OSD menus.
22 F r ont View Por ts Description Function 1 AV 4 Use the A V4 input to connect an external device, such as a VCR or a VCD/DVD player . Audio Input (L, R): white and r ed audio cables. Video Input (S-Video or V ideo): yellow (video) or S-V ideo cable.
23 R ear Panel Inpu t and Output Por ts Description Function 1 DVI Connects to a PC’ s DVI port. 2 Line in Connects to a PC’s line/audio out port. 3 Line out Connects to external amplifier or speakers.
24 4 AV 1 Use the A V1 input to connect an external device, su ch as a VCR or a VCD/DV D player with a component outp ut. Audio Input (R, L): white and r ed audio cables. Video Input (Y , P B , P R ): video cables. 5 AV 2 Use the A V2 input to connect an external device, su ch as a VCR or a VCD/DV D player .
25 Making Connections Open the back cover as shown in the following illustration to get access to the input and output port s. 1. Rotate the cover in the direction of the arrow .
26 Connecting to an Antenna or Cable TV 1 Connect one end of the VHF/UHF (Ant enna) or CA TV cable to the ANT Jack (VHF/UHF IN Jac k ) on the back of the TV . 2 Connect the other en d of the VHF/ UHF (Antenna) or CA TV cable to the Antenna or CA TV socket.
27 Connecting to A V Devices Connect external devices such as VCD/DVD players or VCRs to the TV using the A V1, A V2, A V3, and A V4 ports on the back or front of the TV .
28 Connecting to a Video Camera using S-Video The following illustration shows how to connect t he TV to a camcorder using the A V2 S-video por t. Actual connections may var y according to the make and model o f the device. Refer to the user ’s manual included with the camcorder for more det ailed instructions.
29 Connecting to a VCR, VCD or DVD Player using composite video The illustration presented here shows how to connect your TV to a VCR, VCD, or DVD player using the A V3 composite video port. Actual connections may vary according t o the make and model of your device.
30 Connecting Ea r phone Y ou can use earphone to listen to t he TV instead of using the built-in speakers. Connect earphone to the earphone line out port as illustrated.
31 Connecting an Amplifier or Speak er s Connect an external amplifier or speakers to the line out port to provide better sound quality . Refer to the following illustration.
32 Connecting to a PC Connect the TV to your PC to use it as the monitor using the DVI port as shown. Connect the DVI port of the TV to the DVI ou tput of the PC. Connect the line out port of the PC to the line in port of your TV to listen to audio from the PC.
33 Connecting the P owe r Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power ad apter connector into the DC-IN on the rear panel o f the TV . 3 Plug the three-pronge d plug at the other end of the power cord into a power outlet.
34 Using the Remote Co ntrol For best result, use the remote control within a dist ance of 6 meters (20 feet) from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when point ing at the signal sensor . Refer to the following illustration.
35 T ur ning the TV On and Of f 1 Press the POWER button on the remote control or on the T V control panel. The power LED indicator o n the front of the TV c hanges from red to green, indicating that the power is on. 2 Press the POWER button again. T he power LED changes from green to red, indicating that the TV is off.
36 Adjusting the V olume 1 Press the VOL S button to increase the volume. 2 Press t h e VOL T button to decrease the volume. 3 Press the MUTE button. The word “MUTE” appears on the bottom right corner of the screen and sound is turned of f. 4 Press the MUTE button again to restore the original volume.
37 Using PIP and POP The TV features Picture-in-Picture (PIP) and Picture-out side- Picture(POP), enabling you to view two sources at the same time. Follow these instructions. 1 T urn on the TV and sele ct a source sign al. 2 Press the PIP bu tton on the remote contro l.
38 4 Press the POSITION button on the remote control to move the PIP window to one of the four corners of the screen as shown. 5 Press the PIP bu tton to switch t o POP mode. The two sign als are displayed side-by-si de. 6 Press the PIP button agai n.
39 The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV's setting. Th is chapter describes how to change each of the available settings. T he OSD menu can be accessed through either the front con trol panel or th e remote control.
40 Picture Settings Note: • Y ou can control the OSD with either the remote cont rol or the front pa ne l contr ol. • PC picture mode and TV picture mode have different menu items; PC picture mode includes a Backlight adjustme nt. Press MENU to enter the OSD Main Menu screen.
41 Brightness 1 Press the CHANNEL S or T button to select BRIGHTNESS. The slider bar show s the current setting. 2 Press the VOLUME S button to increase the brightness.
42 Contrast 1 Press the CHANNEL S or T button to select CONTRAST . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the contrast .
43 Backlight (PC mo de) 1 Press the C HANNEL S or T button to select BACKLIGHT . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the ba cklight intensity . 3 Press the VOLUME T button to decrease the backligh t intensit y .
44 Hue 1 Press the CHANNEL S or T button to select HUE . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the hue. 3 Press the VOLUME T button to decrease the hue.
45 Saturation 1 Press the CHANNEL S or T button to select SA TURA TION . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the satur ation.
46 Sharpness 1 Press the CHANNEL S or T button to select SHARPNESS . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the sharpness.
47 Black Level 1 Press the CHANNEL S or T button to select BLACK LEVEL . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the black level.
48 Color T emp er ature 1 Press the CHANNEL S or T button to select COLOR TEMP . 2 Press the VOLUME S or T button to change the colo r temperature. The current setting is shown in brackets. The following optio n s are available: • STD Color – for standard color settings.
49 Preset 1 Press the CHANNEL S or T button to select PRESET . 2 Press the VOLUME S or T button. “ON” appears in the brackets. All pict ure settings are returned to the factory-set default values.
50 Audio Settings Note: Y ou can control the OSD with either the remote control o r the front panel control. Press MENU to enter the OSD Main Menu screen.
51 Tr e b l e 1 Press the CHANNEL S or T button to select TREBLE . The slider bar shows the current setting . 2 Press the VOLUME S button to increase the treble.
52 Bass 1 Press the CHANNEL S or T button to select BASS . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the bass. 3 Press the VOLUME T button to decrease the bass.
53 Balance BBE, T ru S urround , and EALA 1 Press the CHANNEL S or T button to select BALANCE . The slider bar shows the curre nt setting. 2 Press the VOLUME S button to shift the balance to the right speaker . 3 Press the T button to shift the balance to the lef t speaker .
54 Earphone 1 Press the CHANNEL S or T button to select EARPHONE . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the ear phone volume.
55 Preset 1 Press the CHANNEL S or T button to select PRESET . 2 Press the VOLUME S or T button. “ON” appears in the brackets. All audio setting s are returned to the factory-set default values.
56 TV Settings Notes: • Operate the OSD with ei ther the remote control or th e front panel con- trol. • The TV OS D menu is not available if the i n put source is not TV . Press MENU to enter the OSD Main Menu screen. 1 Press CHANNEL S or T to select TV .
57 TV/CA TV 1 Press the CHANNEL S or T button to select TV/CA TV . The current setting is shown in brackets. 2 Press the VOLUME S but ton to select CA TV in order to receive cable TV signals. 3 Press the VOLUME T but ton to select TV in order to receive broadcast TV signals.
58 MTS 1 Press the CHANNEL S or T button to select MTS . The current setting is shown in bracke ts. 2 Press the VOLUME S or T button to s elect from the various MTS options: • MAIN – select the main audio signal. • SAP – select the secondary audio signal • DUAL – enable both pri - mary and secondary audio signals.
59 Auto Scan 1 Press the CHANNEL S or T button to select AUTO SCAN . The current setting is shown in brackets. 2 Press the VOLUME S button to enable auto scanning. “ O N” is displayed in brackets and the TV start s scanning automatically for TV channels.
60 Channel Add/Erase 1 Press the CHANNEL S or T button to select CH. ADD/ERASE . The current setting is shown in brackets. 2 Press the VOLUME S button to add the current channel. 3 Press the VOLUME T button to delete the current channel. TV MENU : CLOSE : SELECT : ADJUST TV MAIN OFF ADD TV / CA TV MTS AUTO SCAN CH .
61 Favorite Ch annel 1 Press the CHANNEL S or T button to select F A V . CHANNEL . 2 Press the VOLUME S or T button to enter the F A V .CHA NNEL menu. 3 Press the CHANNEL S or T button to select a favorite channel number 1 ~ 4 . 4 Press the VOLUME S or T button to choose a channel to assign to the favorite channel number you selected in step 3.
62 PC Settings Notes: • Operate the OSD with ei ther the remote control or th e front panel con- trol. • The PC OSD menu is not availab le if the input source is n ot PC. Press MENU to enter the OSD Main Menu screen. 1 Press CHANNEL S or T to select TV .
63 Phase 1 Press the CHANNEL S or T button to select PHASE . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the phase. 3 Press the VOLUME T button to decrease the phase. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V -POSITION 15 OFF AUTO ADJ .
64 Clock 1 Press the CHANNEL S or T button to select CLOCK . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the clock. 3 Press the VOLUME T button to decrease the clock. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V -POSITION 15 OFF AUTO ADJ .
65 Auto Adjustment DOS Mode 1 Press the CHANNEL S or T button to select AUTO ADJUSTMENT . 2 Press the VOLUME S button to enable auto adjust ment. The display is automatically configured f or the attached computer ’s display properties. 1 Press the CHANNEL S or T button to select DOS MODE .
66 Horizontal Position 1 Press the CHANNEL S or T button to select H POSITION . The slider bar shows the current set ting. 2 Press the VOLUME S button to move the display to the right. 3 Press the VOLUME T button to move the display to the left. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V -POSITION 15 OFF AUTO ADJ .
67 V ertical Position 1 Press the CHANNEL S or T button to select V POSITION . The slider bar shows the current set ting. 2 Press the VOLUME S button to move the display upward. 3 Press the VOLUME T button to move the display downward. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V -POSITION 15 OFF AUTO ADJ .
68 Miscellaneous Settings Note: Operate the OSD with either the remote con trol or the front panel control. Press MENU to enter the OSD Main Menu screen. 1 Press CHANNEL S or T to select MISCELLANEOUS. 2 Press VOLUME S or T to ente r the MISCELLANEOUS Menu.
69 Wide Language 1 Press the CHANNEL S or T button to select WIDE . The current setting is sho wn in brackets. 2 Press the VOLUME S or T button to select the screen format from the following: –1 6 : 9 –4 : 3 – Anamorphic 1 Press the CHANNEL S or T button to select LANGUAGE .
70 Sleeper The sleep timer turns the TV of f automatically after a set time. 1 Press the CHANNEL S or T button to select SLEEPER . The current setting is shown in brackets.
71 Time This setting allows you to set the system time. 1 Press the CHANNEL S or T button to select TIME . 2 Press the VOLUME S button to change the time. 3 Press the CHANNEL S or T button to select HOUR. Press the VOLUME S or T button to increase or decrease the hour .
72 T urn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprint s from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid damaging the finish.
73 Situation Solution No picture and sound. • Connect the power cord prope rly . • Press the POWER button on the contr ol panel or remote control. • Press the SOURCE button to cycle through connected video sources. • Press the CHA NNEL UP or CHANNEL DOWN button to switch to other TV stations.
74 No sound but have image. • M ake sure the source device is function ing properly . • S et the volume to a higher level. • M ake sure the audio cable is connected securely . • Turn the mute off. Screen image turns over . • M ake sure the video signal cable is connected properly .
75 L T13-23A1 LCD Panel Size 23-inch TFT Aspect Ratio 15:9 Panel Best Resolution 1280 (horizont a l) x 768 (vertical) TV System NTSC Video Syste m A V1: Component V ideo (RCA jack, YPbPr) A V2: Compos.
76 PIP Operation Mode The following table shows which main sources are compatible with PIP and PO P sources. Main Source PIP Source POP Source AV 1 (YPbPr or YCbCr) AV 2 — AV 3 — AV 4 — TV2 — .
77 Computer Compatib ility Char t The following table shows re solution and frequency values supported by the TV . Resolution Frequency Remarks 640 X 400 70 Hz — 640 X 480 60 Hz — 67 Hz Mac 72 Hz .
78 Aspect Ratio The ratio of width to height of a film, i mage or display screen. BBE A proprietary audio enhancement technology . BBE compensates for distortion common to loudspe akers. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast).
MEMO.
MEMO.
Ein wichtiger Punkt beim Kauf des Geräts HANNspree LT13-23A1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HANNspree LT13-23A1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HANNspree LT13-23A1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HANNspree LT13-23A1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HANNspree LT13-23A1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HANNspree LT13-23A1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HANNspree LT13-23A1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HANNspree LT13-23A1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HANNspree LT13-23A1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
