Benutzeranleitung / Produktwartung DT0B-10A1 des Produzenten HANNspree
Zur Seite of 60
.
Table of Contents 1 1. Warranty and Service .................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ..............................
Table of Contents 2 11. Adjusting On-Screen Display (OSD) Settings ............... 2 8 Brightness ............................................................... 2 9 Contrast ............................................................... ... 3 0 Video Setting .
3 The instructions on this manual are for the model(s) listed on the front cover . Be fore you start readi ng, check your product number by looking at the rear of your TV .
4 This manual is designed to assist us ers in setting up and usin g the LCD TV . Information in this document has be en carefully checked for accuracy; however , no guarantee is given to the correctness of the contents. The information in this do cument is subject to change without notice.
5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended power cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connects to ground; do not r emove it.
7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual carefully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future refere nce. Keep the box and packaging in case the product needs to be shipped in the future.
8 Optimal V iewing D istan ce 102 cm M E N U S O U R C E C H C H V V.
9 Import ant Safety Inst ructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near wa ter . 6. Clean only with a dr y cloth. 7. Do not block any vent ilation ope nings.
10 10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point wh ere they exit from the appar atus. 1 1. Use only with a cart, stand, tripod, bracket, or table specified by th e manufacturer , or sold with the apparatus.
11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volta ge electric power compo- nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
12 Inst allation T o avoid damage to power circuit s, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vents. Install the outdoor antenna far from power trans- mission lines to av oid possible danger .
13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
14 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may n ot cause harm- ful interference, and ( 2) this devi ce must accept any interference received, including inter ference that may cause undesired operation.
15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limit s for radio noise emissions from digital a pparatus as set out in the Radio Interference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B.
16 Thank you for purchasing this Liquid Cryst al Display TV . Y our LCD TV is d esigned to be safe, versatile, and easy to use. The design of the product is featuring ”Micke y Mouse” ,which makes it a fun addition to any room.
17 Make sure the following component s are included in the b ox. Contact your vendor immediately if any thing is missing or damaged. TV MENU SOURCE CH CH V V User ’s Manual Quick St art Guid e Wire .
18 Fr o n t V i e w Description Function 1 Menu T urns the On-Screen Display (OSD) menus on and of f. 2 Power / Power LED T urns the TV on and off. Green LED indi - cates power on. 3 Select channel Changes the channel. Press CH S to increase the channel number .
19 Input and Output P or ts Description Function 1 Headpho ne line out Connects to head phones or other audio device. 2 Left and right audio in (of A V1 ) Connects to VCR/VCD/DVD p layer CVBS RCA left and right audio cables (white and red). 3 Video in (of A V1) Connects to VCR/VCD/DVD p layer CVBS RCA video cable (yellow).
20 Connecting to an An tenna/Cable TV 1. Connect one e nd of the VHF/UHF (Antenna) or CA TV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV . 2. Connect the other end of the VHF/UHF (Antenna) or CA TV cable to the Antenna socket or CA TV cable.
21 Connecting to A V De vices Connect external devices such as VCD/DVD players or VCRs to the TV using the A V1 and A V2 ports on the back o f the TV . Connecting to a VCR, VCD or DVD Player The illustration presented here shows how to connect your TV to a VCR, VCD or DVD player .
22 Connecting to a Video Camera The illustration presented here shows how to connect your TV to a camcorder or other type of digit al camera. Actual connections vary according to the make and model o f the device. Note The cables are colo r-coded (black, red, white, yellow).
23 Connecting Exter nal Speak ers and Headphones Headphones or externa l speakers may be used to listen to the TV instead of the built-in speakers. Connect your h eadphones to the speaker/head phone line out port as illustrated. Notes • External speakers or headphones are not included with the produ ct.
24 Connecting the P ow er Adapter 1. Connect the power cord to t he power adapter as illustrated. 2. Plug the power adapte r connector into the DC-IN on the rea r panel of the TV . 3. Insert the three-pronged plug at the other end of the power cor d into a powe r outlet.
25 Using the R emote Control For best results, use the remo te control within a dist ance of 5 meters from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when pointing at the signa l sensor . Refer to the following illustration.
26 T ur ning the TV On and Off 1. Press the PO WER button; the power indicator LED changes from red to green , indicating that the power has been turned on. 2. Press the POWER button again; the power indicator LED changes from green to red, indi - cating that the TV is in standby (off) mode.
27 Switching Source Signals Press the SOURCE button on the remote control or the SOURCE button on the control p anel to select the incoming source sig- nal. The current source setting CH xx appears on the top lef t corner of the screen, A V1 or A V2 appears on the bottom right corner of the screen.
28 The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV’ s settings. This chapter describes how to change each of the available settin gs. The OSD can be used with either the remote contro l or the front con- trol pane l.
29 Brightness 1. Press MENU to enter the OSD menus. 2. Press the CH U P button or CH D OWN butto n to select Brightn ess. 3. Press MENU . The brightness slide bar is highlighted. 4. Press the CH UP button to increase the brightness. 5. Press the CH DO WN button to decrease the brightness.
30 Contrast 1. Press MENU to enter the OSD menus. 2. Press the CH DOWN button or CH UP button to select Contrast. 3. Press MENU . The contrast slide bar is highlighted. 4. Press the CH UP button to increase the contrast. 5. Press the CH DO WN button to decrease the contrast.
31 Video Setting Press the MENU button to enter the OSD Main Menu screen. 1. Press the CH DOWN button o r CH UP button to select Video Setting. 2. Press MENU to enter the Video Settin g menu.
32 Hue 1. Press the CH DOWN button or CH UP button to select Hue. 2. Press MENU to enter the Hue sub - menu. 3. Press the CH UP button to increase green and decrease red. 4. Press the CH DO WN button to decrease green and increase red. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
33 Saturation 1. Press the CH DOWN button or CH UP button to select Saturation. 2. Press MENU to enter the Saturation submenu. 3. Press the CH UP button to increase the saturation. 4. Press the CH DO WN button to decrease the saturation. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
34 Sharpness 1. Press the CH DOWN button or CH UP button to select Sharpness. 2. Press MENU to enter the SHARP - NESS submenu. 3. Press the CH UP button to increase the sharpness. 4. Press the CH DO WN button to decrease the sharpness. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
35 Color T emperature 1. Press the CH DOWN button or CH UP button to select Color T emp. 2. Press MENU to enter the Color T em - perature submenu. There are three default color temperatures to Choo se from. St andard Color Press the CH DOWN button or CH UP button to select S tandard, then press MENU .
36 Audio Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN button o r CH UP button to select Audio Setting. 2. Press MENU to enter the Audio Setting menu.
37 Tr e b l e 1. Press the CH DOWN button or CH UP button to select T reble. 2. Press MENU to enter the treble submenu. 3. Press the CH UP button to increase the treble. 4. Press the CH DO WN button to decrease the treble. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
38 Bass 1. Press the CH DOWN button or CH UP button to select Bass. 2. Press MENU to enter the Bass sub - menu. 3. Press the CH UP button to increase the bass. 4. Press the CH DO WN button to decrease the bass. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
39 Balance 1. Press the CH DOWN button or CH UP button to select Balance. 2. Press MENU to enter the Balance submenu. 3. Press the CH DO WN button to shift the balance to the lef t speaker . 4. Press the CH UP button to shif t the balance to the right speaker .
40 Mute 1. Press the CH DOWN button or CH UP button to select Mute. 2. Press MENU to enter the Mute sub - menu. 3. Press the CH UP button to turn the mute off. 4. Press the CH DO WN button to turn the mute on. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
41 Note The setting menu is available when current select source is TV . TV Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN button or CH UP button to select TV Setting.
42 TV/CA TV 1. Press the CH DOWN button or CH UP button to select TV/CA TV . 2. Press MENU to enter the TV/CA TV submenu. Receiving Cable TV Press th e CH UP button to select CA TV , then press MENU . Receiving Broadcast TV Press the CH DOWN button to select TV , then press MENU .
43 MTS 1. Press the CH DOWN button or CH UP button to select MTS. 2. Press MENU to enter the MTS sub - menu. Select from the following options. MAIN Press the CH DOWN button or CH UP button to select MAIN. A green dot appears and MAIN is highlighted in yel - low .
44 Auto Program 1. Press the CH DOWN button or CH UP button to select Auto Program. 2. Press MENU to enter the Auto Pro - gram Setting submenu. 3. Press the CH DOWN button or CH UP button to select O N or OFF and press MENU . The screen shows “Auto Program.
45 Manual Program 1. Press the CH DOWN button or CH UP button to select “Manual Program”. 2. Press MENU to enter the Manual Pro - gram submenu. 3. Press the CH DO WN button and the CH UP button to find the channel you want to add. Press MENU to select the channel.
46 Channel Add/Erase 1. Select the channel you want to add or delete, for exampl e, Channel 28. 2. Press the CH DOWN button or CH UP button to select CH. Add/Erase. 3. Press MENU to enter the Channel Add/Erase submenu. Select fro m the following options.
47 Favorite Ch annels 1. Press the CH DOWN button or CH UP button to sel ect Favorites CH. Edit. 2. Press MENU to enter the Favorites CH. Edit submenu. 3. The screen displays the four favorite channels: M1, M2, M3, and M4. 4. Press the CH DOWN button and the CH UP button to select the channel number you want to set for M1.
48 Miscellaneous Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN button or CH UP button to select Miscel- laneous Setting.
49 Language 1. Press the CH DOWN button or CH UP button to select Language. 2. Press MENU to enter the Language submenu. 3. The screen displays the available OSD languages: English and T - Chinese (Traditional Chinese). 4. Press the CH DO WN button and the CH UP button to select a language.
50 Sleep Timer The sleep timer turns the TV of f automatically after a set pe riod of time. 1. Press the CH DOWN button or CH UP button to select Sleeper . 2. Press MENU to enter the Sleeper submenu. 3. The screen displays the available sleep timer setting: Of f, 30, 60, 90, and 120 minutes.
51 OSD Display This setting allows you to set th e amount o f information that appears on the LCD screen when the DISPLA Y button is pressed. Y ou can choose from three settings: Of f, Portion, or All. 1. Press the CH DOWN button or CH UP button to select OSD Display .
52 Time Setting This section shows you how to change your TV’ s clock setting. 1. Press the CH DOWN button or CH UP button to select T ime Setting. 2. Press MENU to enter the Ti me Set- ting submenu. 3. The screen displays th e current set- ting. The hour is highlighted in yellow .
53 Re se t The Reset function returns all of your TV’ s user settings to their fac- tory defaults. W arning: The reset function eras es all of your custom and favorite channel set- tings, and will reset all display settings (such as cont rast, brightness, etc.
54 T urn the power off b efore you begin cleaning the TV. Use a clean lens cloth to remove dust and finger- prints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid the damaging the finish. Wipe the shell with a dry soft cloth a nd use neutral cleaning fluids.
55 Situation Solution No picture and sound. • Connect the power cord prope rly . • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through con- nected video sources. • Press CH UP or CH DOWN to switch to other TV stations.
56 No sound but have image. • Make sure the source device is functioning properly . • Set the volume to a higher level. • Make sure the audio cable is connected securely . • T urn the mute off. Screen image turns over . • Make sure the video si gnal cable is connected properly .
57 Item Specifications DT0B-1 0A1 LCD Panel Size 9.6-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizontal) x 600(vertical) Maximum Display Area 194.
58 Aspect Ratio The ratio of width to height of a film, image or display scree n. Broadcast TV Broadcasting video signals using high-freq uency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevision, the original name for cable TV .
59 S-V ideo Super-video, a video cabling standard used to transmit video by keep ing brightness (Y) and color informa tio n (C) on separate channels. Most often used with camcorders, VCRs, and quality re ceiver s and amplifiers to provide sharper pic- tures.
Ein wichtiger Punkt beim Kauf des Geräts HANNspree DT0B-10A1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HANNspree DT0B-10A1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HANNspree DT0B-10A1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HANNspree DT0B-10A1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HANNspree DT0B-10A1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HANNspree DT0B-10A1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HANNspree DT0B-10A1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HANNspree DT0B-10A1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HANNspree DT0B-10A1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
