Benutzeranleitung / Produktwartung AD1684B des Produzenten American Dynamics
Zur Seite of 28
Model AD1684B Receiver Dual Channel General Purpose Receiver Installation Instructions This manual describes the installation and operating procedures for the AD1684B Dual Channel Receiver. The Receiver provides for the control of a Pan/Tilt drive and a motorized Lens for two separate cameras.
This software/firmware is confidential to and is copyrighted by SENSORMATIC ELECTRONICS CORPORATION. It is not to be copied or disclosed in any manner without the express written consent of SENSORMATIC. The software is furnished to the purchaser under a license for use on a single system.
The installation of this product should be made by qualified service personnel and should conform to all local codes. QA301D ! W W W W A A A A R R R R N N N N II I I N N N N G G G G To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
.
CONTENTS Page DESCRIPTION............................................................................... 1 FEA TURES ..................................................................................... 1 Pan/T ilt and Lens Control ...................
.
AD1684B DESCRIPTION DESCRIPTION The AD1684B Receiver is used with American Dynamics Matrix Switching Systems to control pan, tilt, zoom, focus, iris, and auxiliary functions at a camera site. This Receiver is classified as a dual channel type, since two independent control channels are supplied.
SETUP AD1684B SETUP Receiver Configuration Setup AD1684B Receivers may be configured as a two-channel Pan/Tilt and Lens control unit or a single channel unit with four auxiliaries. A two-position Berg jumper, labeled J5 (see Figure 1), is provided to establish this configuration.
Camera Number Setting There are two DIP switches which associate the camera number with the respective channel, A or B. DIP switch S1 is for Pan/Tilt and lens control of Channel A, and DIP switch S2 is for Pan/Tilt and lens or auxiliary control of Channel B.
SETUP AD1684B 4 Table 4 - S2 Pan/Tilt and Lens Camera Number Switch Settings or Auxiliary Settings Channel B L = left ("off"); R = right ("on") CAMERA SWITCH CAMERA SWITCH NUMBER 1.
AD1684B INSTALLATION INSTALLATION This installation should be made by qualified service personnel and should conform to all local codes. Safeguards must be taken to avoid unintentional operation by employees and maintenance personnel working about the premises, by falling objects, by customers, by building vibration, and by similar causes.
CONNECTIONS AD1684B CONNECTIONS Code Line Connections The Code Line connection to the Receiver is made with user- supplied, shielded 2-wire twisted pair, Belden 8760 or equivalent (for Plenum use Belden 88760 or equivalent). The maximum code line length is 5000 feet.
AD1684B CONNECTIONS Pan/Tilt and Lens Connections The Receiver connection to a Pan/Tilt and a motorized Lens is with a 10-pin connector. This connector is located on the left side of the PCB and is labeled J7 (see Figure 1, page 2).
CONNECTIONS AD1684B Table 5 - Dual Pan/Tilt and Lens 10-pin Connector Pinout Channel A - J7 PIN No. FUNCTION Pan/Tilt PINOUT LENS PINOUT 01 Focus __________________ __________________ 02 Zoom ________.
AD1684B CONNECTIONS Auxiliary Connections The Receiver connection of auxiliary equipment is with a ten (10) pin connector, labeled J6, located on the right side of the PCB (see Figure 1, page 2).
CONNECTIONS AD1684B Pre-position (Preset) Connections The Receiver connection to a Pan/Tilt or Lens unit with pre- position servos is with a ten (10) pin connector labeled J4 (see Figure 1, page 2). For dual-channel operation a second 10-pin connector labeled J3 is used for channel B.
AD1684B CONNECTIONS Table 7 - Pre-position Pan/Tilt and Lens 10-pin Connector Pinout Channel A - J4 PIN No. FUNCTION Pan/Tilt Servo PINOUT Lens Servo PINOUT 01 + REF __________________ _______________.
CONNECTIONS AD1684B Power Input Connections Refer to the instructions provided with the enclosure for suitable conduit connectors (when required), and mounting and caution information. Two PG-16 liquid-tight bushings are supplied for use with cord diameters from .
TYPICAL SYSTEM CONNECTIONS.
.
TYPICAL SYSTEM CONNECTIONS AD2150 Controller to AD1684B MAXIMUM DISTANCE between AD1684B and AD2150 is 5000 Ft, using shielded, 18 AWG cable AD2150 AD1684B BWS RS232 PORTS 123 KEYBOARDS 2345 CAMERAS A.
TYPICAL SYSTEM CONNECTIONS AD1996 Controller to AD2091 Code Generator, to AD1684B AD1684B AD2091 AD1996 ABCDEF ON OFF ABCDEF ON OFF ABCDEF ON OFF ABCDEF ON OFF B W S B W S B W S B W S B W S B W S B W .
TYPICAL SYSTEM CONNECTIONS AD1684B to AD1240P Pan/Tilt with Pre-position AD1684B 13-Pin Connector 1240P PAN/TILT 123456789 1 0 1 1 1 2 1 3 BLACK WHITE SHIELD FOCUS ZOOM IRIS DC GROUND AC COMMON DOWN UP DC GROUND RIGHT LEFT + REF PAN TILT FOCUS ZOOM - REF SHIELD SHIELD N.
.
INDEX.
.
Auxiliaries Configuration Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
An American Dynamics Product Designed and built by Sensormatic CCTV Systems Division One Blue Hill Plaza Pearl River, New York, 10965 Business: (914) 624-7600 Technical Support Center: 1-800-442-2225 .
Ein wichtiger Punkt beim Kauf des Geräts American Dynamics AD1684B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie American Dynamics AD1684B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für American Dynamics AD1684B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von American Dynamics AD1684B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über American Dynamics AD1684B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon American Dynamics AD1684B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von American Dynamics AD1684B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit American Dynamics AD1684B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei American Dynamics AD1684B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
