Benutzeranleitung / Produktwartung PD163434A des Produzenten Graco
Zur Seite of 60
F AIL URE T O PROPERL Y USE THIS CHILD RESTRAINT INCREASES THE RISK OF SERIOUS INJURY OR DEA TH IN A SUDDEN ST OP OR CRASH. Child Restraint Owner ’ s Manual READ THIS MANUAL. Do not install or use this child restraint until you r ead and understand the instructions in this manual.
Before y ou begin 1.0 W arnings to Parents and Other Users 2.0 Registration Inf ormation 2.1 Register Y our Child Restraint 2.2 Recall Information 2.3 If Y ou Need Help 3.0 Useful Informa tion 3.1 Certication 3.2 Child Restraint Useful Life 3.3 Second Hand Child Restraint 4.
Installation 9.0 Installing Base Using V ehicle S eat Belt 10.0 Installing Base Using LA TCH 11.0 REAR-F A CING INST ALLA TION 12.0 FORW ARD-F ACING INST ALLA TION 13.0 T ether Use 14.0 T ether and LA T CH Storage 14.1 T ether Storage 14.2 LA T CH Storage 15.
1.0 W arnings to Par ents and Other Users • DO NO T PLA CE THIS CHILD RESTRAINT IN A VEHICLE SEA TING L OC A TION THA T HAS A FRONT AIR BAG . If an air bag inates, it can hit the child and child restraint with gr eat force and cause serious injur y or death to your child .
• No child restraint can gu arantee protection from injur y in every situation. Howe ver , proper use of this child restraint reduces the risk of serious injury or death to your child. • F AILURE T O PROPERL Y USE THIS CHILD RESTRAINT increases the risk of serious injury or death in a sharp turn, sudden stop or crash.
4. PROPERL Y SECURING THE CHILD RESTRAINT IN THE VEHICLE using a seat belt designed to restrain a child r estraint or by using LA T CH . Man y seat belts are NO T safe t o use with this child restraint, even though they can easily be threaded through or ar ound the child restraint! Vehicle seat belt system MUST hold child restraint securely .
• SERIOUS CRIPPLING INJUR Y OR DEA TH can result if infant fac es front of vehicle. The American Academ y of Pediatrics r ecommends that children should remain rear-facing f or as long as possible, but be at least one year of age bef ore being positioned forward-facing.
• DO N O T INST ALL OR USE THIS CHILD RESTRAINT AND BASE UNTIL YOU READ AND UNDERST AND THE INSTRUC TIONS IN THIS MANU AL AND IN Y OUR VEHICLE OWNER’ S MANU AL. D O N O T let others install or use the child restraint unless they understand how to use it.
• DO NO T use accessories or parts other than those provided by Grac o. Their use could alter the performance of the child restraint. • NEVER USE A SEC ONDHAND CHILD RESTRAINT or a child restraint whose history you do not k now . • DO NO T MODIFY Y OUR CHILD RESTRAINT or use any ac cessories or parts supplied by other manufacturers.
2.0 Registration Informa tion Model Number: Manufactured in: Purchase Date: Please ll in the above inf ormation. The model number and manufactured in (date) can be found on a label on the child r estraint. Fill out the pr epaid registration postcar d attached to the harness and mail it today .
ST OP using child restraint and throw it a way after the date MOLDED into the child restraint. Do not use this child restraint 10 years after the date of manufacture.
• Remove seat pad fr om right hand side of the child restraint as child sits in restraint D . • Inser t cupholder into opening in child restraint E . • Rotate cupholder down, until you hear a click, to lock into plac e F . • Wr ap seat pad back around cupholder and side of child restraint G .
A B D E F G H C CLICK! CLICK!.
A B C D E F G H I J K M N Q P O L 5.0 F eatures 5.1 Child Restraint.
*V ehicles are now (or can be) equipped with tether anchor points behind some seats. A tether anchors the top of the child restraint to the body of the vehicle. When used properly with the vehicle seat belt or LA T CH , a tether helps reduce injury in a sudden stop or crash.
R S T U W Y Z X 5.0 F eatures 5.2 BASE V NO TE: Only use base with Smart S eat™ All-In-One Carseat..
**United States F ederal Motor Vehicle Safety Standards hav e dened a new system for installing child r estraints in vehicles. The system is called LA TCH. LA T CH may ONL Y be used IN PLACE of vehicle belt if vehicle is equipped with LA TCH anchor points.
Rear-F acing with base 5 lbs-20 lbs (2.2 kg-9 kg) and up to 1 year MUST BE REAR F ACING Forward-F acing with base 40 lbs-65 lbs (18.1 kg-29.5 kg) MAX HEIGHT 50” (127 cm) Shoulders are BEL OW top harness slot position Bo os t er WITHOUT Base 30 lbs-65 lbs (13.
• Infants who weigh less than 20 lbs. (9 kg) MUST be rear-facing . • Infants or toddlers 20 to 40 lbs. (9 to 18.1 kg) ma y be rear-facing . IMPORT ANT: This child restraint is cer tied for use rear-f acing with children up to 40 lbs . (18.
6.2 F or w ard-facing with base: 20 to 65 lbs. (9 to 29.5 k g) WITH BUIL TIN HARNESS SY STEM: • Child must not exceed 50 inches (127 cm) • At least one year old . • T oddlers 20 to 65 lbs. (9 to 29.5 kg) who are capable of sitting upright unassisted may be forward-facing .
6.3 Booster WITHOUT base: 30 to 100 lbs. (13.6 to 45 k g) WITHOUT BUIL TIN HARNESS SY STEM: Harness MUST be stored during Booster mode , see “19.
7.1 V ehicle Seat Location Requir ements • Children are saf er when properly restrained in r ear vehicle seating positions. Whenever possible secure the child restraint in the center position of the seat directly behind the front seats.
MANY SEA T BEL T SY STEMS ARE NO T SAFE TO USE WITH THE CHILD RESTRAINT . THE VEHICLE SEA T BEL T MUST BE DESIGNED T O HOLD THE CHILD RESTRAINT TIGHTL Y A T ALL TIMES.
7.4 F or Built-in Harness Only • Lap Belts - Manually adjusted when buckled, the belt is tightened manually by pulling on the free end . • Combina tion Lap/Shoulder Belt with Locking Latch Plate - Once it is buckled, this type of belt has a latch plate that will not allow the lap portion of the belt to loosen.
7.6 UNSAFE V ehicle Belt Sy stems • Lap Belts with Emergency Locking Retractor (ELR) This lap belt stays loose and can move until it locks in a crash or sudden stop .
• Passiv e Restraint - Lap Belt with Motorized Shoulder Belt DO NO T use vehicle belts that are attached to the door in any wa y or that move along a track to automatically surround the passenger when the door is closed.
United States F ederal M otor Vehicle Safety Standards ha ve defined a new system for installing child restraints in v ehicles. The system is called LA T CH . LA T CH stands for: L ower AN chors and T ether for CH ildren. LA T CH in the vehicle consists of a t op tether anchor point and two lower anchor points.
NO TE: Some vehicle manufacturers have low er maximum weight ratings for LA TC H anchors, so you must c onsult your vehicle owner’ s manual or call the vehicle manufacturer to confirm the limits on y our vehicle ’ s LA T CH anchors .
8.2 LA T CH Sy stem LA T CH consists of a permanently attached lower anchor belt and a top tether strap . ONL Y use LA T CH in a seating position recommended by v ehicle manufacturer . LA T CH low er vehicle anchor points are defined as 11 inches from the center of one LA T CH anchor to the c enter of another LA T CH anchor .
Y ou must carefully follow the instructions provided by y our vehicle manufacturer , in addition to the information in this manual . Before pr oceeding be sure y ou have r ead and understood, “7.0 Choosing an Appropriate V ehicle S eat Location ” on pages 22-26.
H Lap Belt I Lap/Shoulder Belt A C D B E F G V ehicle Belt.
1. Remove LA TCH from storage area A . F or ease of installation, ex tend LA T CH to its maximum length. 2. Place base in vehicle seat as shown B . 3. Make sure LA T CH is rout ed through vehicle/ LA TCH belt path normally used for vehicle seat belt.
B C F G D A H E.
F D A 1. T est base for secure installation. See sections 9.0 and 10.0 for base installation, p. 30-33 A . 2. Push in B and r otate knobs C on both sides of child restraint at the same time to unlock position. 3. Place child restraint on base in r ear-facing position D .
G E C B H L OCKED I UNL OCKED J.
D A 1. T est base for secure installation. See sections 9.0 and 10.0 for base installation, p. 30-33 A . 2. Push in B and rotat e knobs C on both sides of child restraint to unlock position. 3. Place on base in forward-facing position D . 4. Rotate knobs on both sides to lock seat to base E .
G E C B T ether H L OCKED I UNL OCKED.
A B C All LA T CH seating positions hav e tether anchors. Always use tether if a v ehicle tether anchor is available in f or ward-facing mode with harness . Check your vehicle o wner ’ s manual for the tether anchor location(s). If your vehicle is not equipped with a tether anchor , it may be possible to install one.
T ether must be stored to child r estraint for r ear-facing use. • Store by clipping t o bar on back of seat as shown A . • Pull loose end of adjustment strap to r emove an y slack. • Roll loose end of adjustment strap up and secure with a rubber band.
Harness Adjustment Strap 15.1 Harness Straps • T o tighten: Pull harness adjustment strap A . • T o loosen: Lif t lever B while pulling shoulder harness straps C . 15.2 Chest Clip • T o open: Press tabs and pull apart D . • T o close: Snap halves together E .
A B C D E F G H I Bottom of child restraint Bottom of child restraint Bottom of child restraint Bottom of child restraint.
B A T o prevent ejection in sudden stop or crash: • Use in rear-facing mode only . • Never allow body support to bunch or fold behind child. 1. Make sure chest clip and harness are open. 2. Place body support behind harness as shown in A .
B A • Wr ap crotch strap cov er around crotch strap and fasten hook and loop tape at front A . 16.2 Harness Co vers & Cr otch Strap C ov er (on certain models) T o prevent serious head injury in sudden stop or crash: • Harness covers ar e not to be used by childr en over 40 lbs.
Recline only works in modes where child r estraint is attached to the base. 17.0 USING RECLINE F AIL URE T O PROPERL Y recline the infant restraint on the vehicle seat increases the risk of serious injury or death. 1. Pull up on recline butt on on front of child restraint A .
F D F A C E B NO T LEVEL NO T LEVEL REAR F A CING FORW ARD-F ACING.
1. Place child in child restraint A with child’ s back at against back of child restraint. A void bulky clothing. 2. Place harness straps over child’ s shoulders and inser t tongue(s) into buckle B . 3. Pull up on tongue(s) t o be sure they are locked .
Chest Clip Buckle Harness adjustment strap A B C D E F.
T o preven t serious injury or death: • Keep harness straps snug and positioned on shoulders with chest clip at arm pit level. • Do not use strap covers , blankets, cushions , or padding under harness straps or child unless provided by Grac o.
A 18.3 Adjusting Head Support/ Harness Straps F ailure to properly adjust the harness straps for your child increases the risk of serious injury or death in the event of a sharp turn, sudden stop or crash. • BEFORE adjusting the head suppor t height, have y our child lean forward slightly .
D 19.1 Storing Harness Harness must be stored during Booster Mode . 1. Push the clip at the end of crot ch strap through bottom of seat and pull out through the seat and seat cov er A . 2. Rotate bottom of head support pad up and attach to back of head suppor t pad with hook and loop tape B .
B C DE F G H I A Bottom of child restraint.
19.2 Using Child Restr aint in Booster Mode • V ehicle belts MUST lay at against child and MUST not be twisted. • NEVER use a vehicle lap- only belt across front of child A . • DO NO T use shoulder belt loose or positioned under arm B .
A B C D E F G H I.
19.3 Securing Child in Booster S eat and V ehicle USE ONL Y the v ehicle lap and shoulder belt system when restraining the child in the booster seat. 1. Remove base fr om vehicle seat A . 2. Place booster seat firmly against the back of a forward-facing vehicle seat equipped with a lap/shoulder belt only B .
Armrest Lap belt Shoulder belt A B CDE.
19.4 Adjusting Head Support in Bo o st er Mo de When using in booster mode always use one of the top 4 height positions A . • BEFORE adjusting the head suppor t height, have y our child lean forward slightly .
20.1 Adjusting Armr est Armrest can be adjusted by pushing up or down on it A . 20.0 Additional Informa tion A.
20.2 Removing Seat C ov er 1. Store harness see “19.1 Storing Harness” , p. 50 . 2. Remove elastic loops and butterfly tabs from seat as indicated in A and B . 3. Pull off co ver taking care around the lock knobs, recline handle, lev el indicator and cup holder .
• This child r estraint system conf orms to all applicable F ederal Motor V ehicle Safety Standards . • This Restraint is C er tified for Use in Motor V ehicles. • This Restraint is NO T Cer tified for Use in Aircraft. • Continuous use of child restraint ma y cause damage to vehicle seat.
T o purchase par ts or acc essories or for warran ty information in the United States, please c ontact us at the following: w ww .gracobab y .com or 1-800-345-4109 Store instruction manual in the space provided on back of seat. ALL-IN-ONE CARSEAT ALL-IN-ONE CARSEAT 21.
Ein wichtiger Punkt beim Kauf des Geräts Graco PD163434A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Graco PD163434A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Graco PD163434A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Graco PD163434A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Graco PD163434A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Graco PD163434A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Graco PD163434A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Graco PD163434A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Graco PD163434A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
