Benutzeranleitung / Produktwartung SBX-5363 des Produzenten AMD
Zur Seite of 55
.
AMD Geode 3.5" Embedded Board User's Manual Version 1.0 2009.10 Index - i - T able of Contents Chapter 1 Introduction ............................................. 1 1.1 Copyright Notice ......................................................
CS-3536B-R/CS-3536B-S AMD Geode 3.5" Embedded Board User's Manual Version 1.0 2007.12 Index - i - T able of Contents Chapter 1 Introduction ............................................. 1 1.1 Copyright Notice ................................
Chapter 3 BIOS ......................................................... 22 3.1 BIOS Introduction ....................................................... 23 3.2 BIOS Setup ................................................................ 23 3.3 Standard CMOS Features .
Chapter 3 BIOS ......................................................... 22 3.1 BIOS Introduction ....................................................... 23 3.2 BIOS Setup ................................................................ 23 3.3 Standard CMOS Features .
1.1 Copyright Notice All Rights Reserved. The information in this document is subject to change without prior notice in order to improve the reliability, design and function.
1.1 Copyright Notice All Rights Reserved. The information in this document is subject to change without prior notice in order to improve the reliability, design and function.
1.6 Warranty This product is warranted to be in good working order for a period of two years from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms.
1.6 Warranty This product is warranted to be in good working order for a period of two years from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms.
Audio Expansion Interface Serial Port 1.9 Specification 1.10 Board Dimensions Introduction Introduction - 6 - - 7 - Product Name Form Factor Processor Chipset System Memory VGA/ LCD Controller Ethernet BIOS IDE Interface Parallel Port/ Floppy K/B and Mouse Universal Serial Bus GPIO Hardware Monitor Chip RTC Operation T emp.
Audio Expansion Interface Serial Port 1.9 Specification 1.10 Board Dimensions Introduction Introduction - 6 - - 7 - Product Name Form Factor Processor Chipset System Memory VGA/ LCD Controller Ethernet BIOS IDE Interface Parallel Port/ Floppy K/B and Mouse Universal Serial Bus GPIO Hardware Monitor Chip RTC Operation T emp.
Installation 2 Chapter 2 Introduction Installation - 8 - - 9 - USB1 LAN KB/MS RES JBAT1 VGA USB2 COM1 AUDIO HDD LED Power LED AMD Cs5536 SD-DIMM1 PC/104 AMD Lx800 DIO LPD/FDD JCF1/JVLCD1 COM2 LVDS IDE LCD FRT INV1 JRS1 .
Installation 2 Chapter 2 Introduction Installation - 8 - - 9 - USB1 LAN KB/MS RES JBAT1 VGA USB2 COM1 AUDIO HDD LED Power LED AMD Cs5536 SD-DIMM1 PC/104 AMD Lx800 DIO LPD/FDD JCF1/JVLCD1 COM2 LVDS IDE LCD FRT INV1 JRS1 .
2.1.4 LVDS Panel V oltage Select (JVLCD1) Type: Onboard 3-pin header (JVLCD1) JVLCD1 1-2(default setting) 2-3 LCD V oltage 5.0V 3.3V JVLCD1 2.1 Jumpers Quick Reference Jumpers COM2 Installation Instal.
2.1.4 LVDS Panel V oltage Select (JVLCD1) Type: Onboard 3-pin header (JVLCD1) JVLCD1 1-2(default setting) 2-3 LCD V oltage 5.0V 3.3V JVLCD1 2.1 Jumpers Quick Reference Jumpers COM2 Installation Instal.
2.2.1 Ethernet Connector Connector: LAN1 Type: One external RJ-45 on bracket Pin 1 3 5 7 Description Tx + Rx + NC NC Pin 2 4 6 8 Description Tx- NC Rx- NC 2.
2.2.1 Ethernet Connector Connector: LAN1 Type: One external RJ-45 on bracket Pin 1 3 5 7 Description Tx + Rx + NC NC Pin 2 4 6 8 Description Tx- NC Rx- NC 2.
Installation Installation - 14 - - 15 - 2.2.3 Enhanced IDE Connector Connector: IDE1 Type: One onboard 2x22pin Header Pin Description 1 IDE RESET 3 D7 5 D6 7 D5 9 D4 11 D3 13 D2 15 D1 17 D0 19 GND 21 .
Installation Installation - 14 - - 15 - 2.2.3 Enhanced IDE Connector Connector: IDE1 Type: One onboard 2x22pin Header Pin Description 1 IDE RESET 3 D7 5 D6 7 D5 9 D4 11 D3 13 D2 15 D1 17 D0 19 GND 21 .
Installation Installation - 16 - - 17 - Connector: LVDS1 Type: One onboard DF13-30DS Header Pin Description 1 VDD 3 LVDS CLK+ 5 LVDS CLK- 7 GND 9 LVDS TX0+ 11 L VDS TX0- 13 GND 15 LVDS TX1+ 17 LVDS TX.
Installation Installation - 16 - - 17 - Connector: LVDS1 Type: One onboard DF13-30DS Header Pin Description 1 VDD 3 LVDS CLK+ 5 LVDS CLK- 7 GND 9 LVDS TX0+ 11 L VDS TX0- 13 GND 15 LVDS TX1+ 17 LVDS TX.
Installation - 18 - Installation - 19 - 2.3.3 PS/2 Keyboard & Mouse Connector: KBM1 Type: One external 6-pin Mini DIN connector on bracket 2.3.4 CRT Display Connector Connector: VGA1 Type: One ext.
Installation - 18 - Installation - 19 - 2.3.3 PS/2 Keyboard & Mouse Connector: KBM1 Type: One external 6-pin Mini DIN connector on bracket 2.3.4 CRT Display Connector Connector: VGA1 Type: One ext.
-bit General Purpose I/O (DIO) Connector: DIO Type: One onboard 2x10pin Header 2.3.8 16 Installation - 20 - Pin Description 1 DO0 3 DO2 5 DO4 7 DO6 9 GND 11 DI0 13 DI2 15 DI4 17 DI6 19 +5V Pin Descrip.
-bit General Purpose I/O (DIO) Connector: DIO Type: One onboard 2x10pin Header 2.3.8 16 Installation - 20 - Pin Description 1 DO0 3 DO2 5 DO4 7 DO6 9 GND 11 DI0 13 DI2 15 DI4 17 DI6 19 +5V Pin Descrip.
BIOS - 22 - BIOS 3 Chapter 3 BIOS - 23 - 3.1 BIOS Introduction The Award BIOS (Basic Input/Output System) installed in your computer system's. The BIOS provides for a standard device such as disk drives, serial ports and parallel ports.
BIOS - 22 - BIOS 3 Chapter 3 BIOS - 23 - 3.1 BIOS Introduction The Award BIOS (Basic Input/Output System) installed in your computer system's. The BIOS provides for a standard device such as disk drives, serial ports and parallel ports.
BIOS - 24 - 3.3 Standard CMOS Features "Standard CMOS Features" allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the CPU card is already installed in a working system, you will not need to select this option.
BIOS - 24 - 3.3 Standard CMOS Features "Standard CMOS Features" allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the CPU card is already installed in a working system, you will not need to select this option.
BIOS - 26 - Halt On This field determines whether or not the system will halt if an error is detected during power up. All errors (default Whenever the BIOS detects a non-fatal error, the system will stop and you will be prompted. No errors The system boot will not be halted for any error that may be detected.
BIOS - 26 - Halt On This field determines whether or not the system will halt if an error is detected during power up. All errors (default Whenever the BIOS detects a non-fatal error, the system will stop and you will be prompted. No errors The system boot will not be halted for any error that may be detected.
BIOS - 28 - CAS Latency It allows CAS latency time in HCLKs. The system board designer should set the values in this field, depending on the DRAM installed. Do not change the values in this field unless you change specifications of the installed DRAM or CPU.
BIOS - 28 - CAS Latency It allows CAS latency time in HCLKs. The system board designer should set the values in this field, depending on the DRAM installed. Do not change the values in this field unless you change specifications of the installed DRAM or CPU.
BIOS - 30 - On-Chip IDE Device >>> 3.6 Integrated Peripherals On-Chip IDE Channel 1 The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately. Setting: Disabled/Enabled (Default).
BIOS - 30 - On-Chip IDE Device >>> 3.6 Integrated Peripherals On-Chip IDE Channel 1 The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately. Setting: Disabled/Enabled (Default).
BIOS - 32 - Onboard Serial/Parallel Port It allows you to select the onboard serial and parallel ports with their addresses. Setting: Serial Port 1 3F8/IRQ4 (Default) Serial Port 2 2F8/IRQ3 (Default) Parallel Port 378/IRQ7 (Default) UART Mode Select It determines the UART 2 mode in your computer.
BIOS - 32 - Onboard Serial/Parallel Port It allows you to select the onboard serial and parallel ports with their addresses. Setting: Serial Port 1 3F8/IRQ4 (Default) Serial Port 2 2F8/IRQ3 (Default) Parallel Port 378/IRQ7 (Default) UART Mode Select It determines the UART 2 mode in your computer.
BIOS - 34 - Decode I/O Size 0/ 1/ 2/ 3/ 4/ 5 It allows you to specify the size of the ISA bus. Setting: 1 Byte, 2 Bytes, 4 Bytes, 8 Bytes, 16 Bytes, 32 Bytes, 64 Bytes, 128 Bytes. IT8888 ISA Decode Memory >>> It allows you to use the IT8888 ISA Decode Memory to set the resources for the onboard ISA bus.
BIOS - 34 - Decode I/O Size 0/ 1/ 2/ 3/ 4/ 5 It allows you to specify the size of the ISA bus. Setting: 1 Byte, 2 Bytes, 4 Bytes, 8 Bytes, 16 Bytes, 32 Bytes, 64 Bytes, 128 Bytes. IT8888 ISA Decode Memory >>> It allows you to use the IT8888 ISA Decode Memory to set the resources for the onboard ISA bus.
BIOS - 36 - Power Management It allows you to select the type of power saving management modes. Setting: APM Advanced power management (APM) ACPI (Default) Advanced Configuration and Power Interface (ACPI) Modem Use IRQ It sets the IRQ used by the Modem.
BIOS - 36 - Power Management It allows you to select the type of power saving management modes. Setting: APM Advanced power management (APM) ACPI (Default) Advanced Configuration and Power Interface (ACPI) Modem Use IRQ It sets the IRQ used by the Modem.
BIOS - 38 - PCI/VGA Palette Snoop Some non-standard VGA display cards may not show colors properly It allows you to set whether or not MPEG ISA/VESA VGA cards ca display with PCI/VGA When "Enable.
BIOS - 38 - PCI/VGA Palette Snoop Some non-standard VGA display cards may not show colors properly It allows you to set whether or not MPEG ISA/VESA VGA cards ca display with PCI/VGA When "Enable.
BIOS - 40 - Useing Password to set a password that will be used exclusively on the system. T o specify a password, highlight the type you want and press <Enter>. The Enter Password: message prompts on the screen. Type the password, up to eight characters in length, and press <Enter>.
BIOS - 40 - Useing Password to set a password that will be used exclusively on the system. T o specify a password, highlight the type you want and press <Enter>. The Enter Password: message prompts on the screen. Type the password, up to eight characters in length, and press <Enter>.
BIOS - 42 - Address Device E000:0000h - F000:FFFFh D000:2000h - D000:FFFFh D000:0000h - D000:1FFFh C000:E000h - CF00:FFFFh C000:0000h - C000:DFFFh A000:0000h - B000:FFFFh 0000:0000h - 9000:FFFFh Description System BIOS Area Free space LAN ROM Free space VGA BIOS VGA RAM DOS 640K 3.
BIOS - 42 - Address Device E000:0000h - F000:FFFFh D000:2000h - D000:FFFFh D000:0000h - D000:1FFFh C000:E000h - CF00:FFFFh C000:0000h - C000:DFFFh A000:0000h - B000:FFFFh 0000:0000h - 9000:FFFFh Description System BIOS Area Free space LAN ROM Free space VGA BIOS VGA RAM DOS 640K 3.
BIOS - 44 - 24h 25h 26h 27h 28h 29h 2Ah 2Bh 2Ch 2Dh Eh 2Fh 30h 31h 32h 33h 34h 35h 36h 37h 38h 39h 3Ah 3Bh 3Ch 3Dh 3Eh 3Fh 40h 41h 42h 43h 44h Reserved Reserved Reserved Initialize INT 09 buffer Reser.
BIOS - 44 - 24h 25h 26h 27h 28h 29h 2Ah 2Bh 2Ch 2Dh Eh 2Fh 30h 31h 32h 33h 34h 35h 36h 37h 38h 39h 3Ah 3Bh 3Ch 3Dh 3Eh 3Fh 40h 41h 42h 43h 44h Reserved Reserved Reserved Initialize INT 09 buffer Reser.
BIOS - 46 - 62h 63h 64h 65h 66h 67h 68h 69h 6Ah 6Bh 6Ch 6Dh 6Eh 6Fh 70h 71h 72h 73h 74h 75h 76h 77h 78h 79h 7Ah 7Bh 7Ch 7Dh 7Eh 7Fh Reserved Reserved Reserved Initialize PS/2 mouse Reserved Prepare me.
BIOS - 46 - 62h 63h 64h 65h 66h 67h 68h 69h 6Ah 6Bh 6Ch 6Dh 6Eh 6Fh 70h 71h 72h 73h 74h 75h 76h 77h 78h 79h 7Ah 7Bh 7Ch 7Dh 7Eh 7Fh Reserved Reserved Reserved Initialize PS/2 mouse Reserved Prepare me.
Appendix - 48 - Appendix 4 Chapter 4 Appendix - 49 - 4.1 I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used.
Appendix - 48 - Appendix 4 Chapter 4 Appendix - 49 - 4.1 I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used.
Appendix - 50 - 00000170 - 00000177 000001F0 - 000001F7 00000274 - 00000277 00000279 - 00000279 000002F8 - 000002FF 00000376 - 00000376 00000378 - 0000037F 000003B0 - 000003BA 000003C0 - 000003DF 0000.
Appendix - 50 - 00000170 - 00000177 000001F0 - 000001F7 00000274 - 00000277 00000279 - 00000279 000002F8 - 000002FF 00000376 - 00000376 00000378 - 0000037F 000003B0 - 000003BA 000003C0 - 000003DF 0000.
Ein wichtiger Punkt beim Kauf des Geräts AMD SBX-5363 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AMD SBX-5363 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AMD SBX-5363 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AMD SBX-5363 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AMD SBX-5363 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AMD SBX-5363 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AMD SBX-5363 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AMD SBX-5363. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AMD SBX-5363 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
