Benutzeranleitung / Produktwartung HD 2400 des Produzenten AMD
Zur Seite of 64
A TI Radeon™ HD 2400 Series User ’ s Guide P/N 137-41371-10.
ii © 2007 Advanced Micro Devices, Inc. All rights re served . The contents of this documen t are provided in connection with Advanced Micro Dev i ces, Inc.
iii Important Safet y Instructions • Read Instructions —All the safety and operating instructions should be read before the product is operated. • Retain Instructions —The safety and operating instructions should be retained for future reference.
iv.
v Content s Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 System Requirements 1 Installing the Graphics Card . . . . . . . . . . . . . . . . . 3 Before You Begin 3 Record the Serial and Part Numbers 3 Uninstall Old Graphics Drivers 4 Install the Graphics Card 5 Installing and Configuring Disp lays .
vi Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Troubleshooting 43 Determine the System Card Bus Type 46 Updating your AGP Motherbo ard/Chipset Drivers 47 Reinstalling Drivers 49 Product Registration 50 Customer Care 50 Additional Accessories 52 Compliance Info rmation 52 Index .
1 Introduction This guide will help you get your hardware and software installed. Use the ATI Catalyst™ Control Center to acce ss the comprehensive help system, generate a problem report, and get the software version information.
2.
3 Inst alling the Graphics Card This topic guides you through the installati on of th e graph ics card. Before Y ou Begin Before you begin installi ng the graphi cs card, do the following. • Record the Serial and Part Numbers on page 3. • Uninstall Old Graphics Drivers on p age 4.
4 Uninst all Old Graphics Drivers To ensure successful instal lation of the graphics card driver, unin stall the graphic drivers for the existing graphics card before remov ing the graphics card from the computer.
5 Inst all the Graphics Card 1 Make sure the computer, monitor , and other peripheral devices are off. 2 Unplug the computer power cord a nd disconnect cables from the back of the computer .
6 9 Reconnect any cables you have di sconnected, connect the monitors, and then plug in the computer and monit or power cords. 10 T urn on the monitor and then the computer . Note: For troubleshooting information, see Reference on page 43. Note: For information on connecting m onitors, see Installing and Configuring Displays on page 7.
7 Inst alling and Configuring Displays Connections The following illustrates som e common connection s on the ATI Rade on™ HD 2400 Series graphics cards. The connections available may vary by model. Sample 1: ATI Radeon™ HD 2400 Series Connections Legend 1 DVI-I Dual Link connection (P r ovides audio and video digital signals.
8 Sample 2: ATI Radeon™ HD 2400 Series Connections Adapters The following illustrates the adapters you can use to connect the graphics card to other disp lay devices.
9 Supported Display Connections To ensure the highest possi ble perf orman ce, only one display device is supported when CrossFire™ is active. When CrossFire™ is active other display devices connected to the other conn ections on both g raphics cards are rendered inactive.
10 Inst alling and Configuring Displays Connect the monitor 1 Make sure the computer and monitor are of f. 2 Plug the moni tor cables into their appropriate connectors. 3 Power on the monitors first an d then restart that computer so that W indows® can detect the new hardware settings.
11 4 Choose a refresh rate from the drop-down list. Caution! Choosing a refresh rate unsupported by your display may damage your display . Consult your display’ s documentation if necessary . 5 Click OK to return to the desktop . Once you have configured the main disp lay you can confi gure any other displays that are connected.
12.
13 Inst alling Sof tware and Drivers Software is provided to take advan t age of all the features of your ATI graphics card, including: • Graphics card driver • A TI Catalyst™ Control Center •.
14.
15 A TI Cat alyst™ Control Center The ATI Catalyst™ Control Center is software that provides access to the display features of the graphics card. Use the ATI Catalyst™ Control Center to fine-tune your graphics settings, enable or disab le connect ed display devices, and change the orientation of the desk top.
16 S t art A TI Catalyst™ Control Center Start ATI Catalyst™ Control Center from one of the following access points: Help The ATI Catalyst™ Control Center He lp provides con ceptual information .
17 Using TV Display and Capture Features These topics describe how to use the TV display and video capture features of your graphics card. • Viewing the PC’ s Display on TV or HDTV on page 17. • Connecting to a TV , VCR, or HDTV on p age 18. • Capturing Video on p age 30 .
18 V iewing T ext on a TV A TV is designed primarily to show moving images. The large dot pitch o f a TV will yield poor q uality static im ages. The small text sizes commonly used for PC desktops can appear bl urred or unclear on a TV. You can compensate for this degradat ion by using larger font s.
19 Note: For maximum performance when wat c hing DVD mo vies or playing computer games on the TV , find the mode and screen resolution that provide the best result, an d use those set tings exclusively . This topic includes th e following procedures: • Connect to an HDMI™ HD TV (DVI-to-HDMI™) o n page 19.
20 HDMI™-to-HDMI™ connectors 3 Connect the DVI-to-HDMI™ adapter to the DVI connection on the graphics card. 4 Connect one end of the HDMI™-to-HDMI™ cable to the DVI-to- HDMI™ adapter . Connect the othe r end of the HDMI™-to-HDM I™ cable to the HDMI™ connect ion on the HDMI™ HDTV .
21 7 Configure the HDTV using th e A T I Catal yst™ Con trol Center, Displays Manager and DTV(HD MI) . Connect to an HDTV (DVI-to-DVI) 1 Before connecting an HD TV , attach a monitor to the computer and install the video drivers. 2 Maker sure the computer and monitor are off.
22 6 Power on the monito r and HDTV , an d then power on the computer . The HDTV will not display anything until Windows® starts. 7 Configure the HDTV using th e A TI Catalyst™ Control Center, Displays Manager and DTV (DVI).
23 3 Set the A TI HDTV C omponent V ideo Adapter DIP switches. Configure the DIP switches to set the appropriate display mode and aspect ratio. This sets the modes which appear when you select Show all Modes in the A TI Control Panel. a) S et the display mode Note: DIP switch 3 i s always off (540p is not support ed).
24 5 Matching the colors on the connections, connect one end of th e RCA patch cables to the A TI DVI-to-HDTV component video adapter . Connect the other end of the RCA patch cables to the component video connections on the HDTV . 6 Connect one end of a sound cable to the computer sound card.
25 S-Video to Component Video (using the ATI 9-Pin HDTV Ou tput Cable) 3 Attach the A TI 9-Pin HDTV Output Cable to the S-V ideo connection on the graphics card. 4 Matching the colors on the connectors, connect one end of the RCA patch cables to the A TI 9-Pin HDTV output cable.
26 7 Power on the monito r and HDTV , an d then power on the computer . The HDTV will not display anything until Windows® starts. 8 Configure the HDTV using th e A TI Catalyst™ Control Center, Displays Manager .
27 3 Connect the S-V ideo connector on the composite video cable to the S-V ideo connection on the graphics card. Connect the other end of the composite video cable to either the S-V ide o or composite video connection on the composite video device. 4 Power on the monit or and composite vide o device, and then power o n the computer .
28 Connect to a European video de vice (S-V ideo to SCART using composite video adap ter) 1 Before connecting a European video devi ce, attach a monitor and install the video drivers.
29 3 If the video device accepts P AL inpu t, you must change the NTSC/ P AL sett ing on the video card to P AL. NTSC is the TV standard used in North America. P AL is the TV st andard for most of Europe, Africa, Asia, Japan, South Korea, and the Philipines.
30 Capturing V ideo Some versions of the ATI Radeon™ HD 2400 Series graphics card can capture video from a camcorder, VCR, or TV. Use a video editing application to add effects, make ch anges, or stream the video on the Internet.
31 Connecting a media device for video capture Use a video in/video out cable to connect the S-Vide o connection on th e graphics card to the S-Video connect ion on a TV, VCR, or camcorder. Capture video to a computer 1 Connect one end of the cable to the S-V ideo connection on the graphics card.
32 b) Double-click Sounds and Audio Devices . c) In the Vo l u m e tab, select Place volume icon in the t askbar . 2 Click Open V olume Controls . 3 If the Line-In volume control is not visible, click Options , and then click Properties . 4 Select the Line-In volume checkbox, and then click OK .
33 Avivo™ V ideo Converter Forma ts *For details on uploading files to a portable device see the device manufacturer’s user’s guide or Help. Open the A TI Avivo™ V ideo Converter Note: The A T.
34 4 Click Go . The A vivo™ V ideo Co nverter W izard opens. 5 Follow the A vivo™ V ideo Converter wizard instru ctio ns. Note: The St art Over button returns the wizard to the Easy Setup W izards page. Upload video to a video iPod® 1 Start iT unes®.
35 Upload video to a Sony® PSP 1 Connect a Sony® PSP to the co mputer using a USB connector . 2 Switch on th e Son y ® PSP . 3 Using the Sony® PSP system software, navigate to the top of the Settings list and select USB Connection . The system detects a new removable disk drive.
36.
37 CrossFire™ CrossFire™ is a multi-GPU performance gaming platform, using CrossFire™-ready motherboards and CrossFire™-compatible graphics cards.
38 For an up-to-date listing of Cros sFire™ certified motherboards, see ati.amd.com/products/certification For an up-to-date listing of certified power supplies, see: ati.
39 6 Align your A TI Radeon™ HD 2400 Series graphics card in the secondary PCIe™ slot next to the existing A TI Radeon™ HD 2400 Series graphics card and press firmly until the card is fully seated. 7 Install the CrossFire™ bridge in terco nnects.
40 CrossFire™ connections 8 Fasten the graphics card securely . Legend 1 550 watt (or better) power supp ly 2 Primary A TI Radeon™ HD 2400 Series graphics card 3 Secondary A TI Radeon™ HD 2400 S.
41 Make sure the cables are not inte rfering with anything insi de the computer (for exampl e, a cooling fan) an d replace the computer cover . 9 Reconnect any peripherals you have disconnected and plug in the computer ’ s power cord. 10 Connect the monitor to the A TI Radeon™ HD 2400 Series graphics card in the primary PCIe™ slot.
42 If additional displays are required wh en CrossFire™ is active, use either SurroundView™ (in cluded in the Custom install op tions on the installation CD) or an addition al graphics card.
43 Reference This topic provides information on troublesho otin g, updating AGP/ motherboard chipset drivers, reinstalling driv ers, where to get additional accessories, and how to register your product, plus warranty and compliance information. T roubleshooting The following troubleshooting tips may help if you experience problems.
44 Screen defects appear • Check if the monitor supports the resolution, horizontal (kHz) and vertical (Hz) refresh rates as required by the graphics card. • Check the current resolution, refresh rate, and color depth settings in the Settings and Monitor tabs in the Display Properties dialog.
45 CrossFire™-Specific T roubleshooting Problem Possible solution CrossFire™ is not functioning In order for CrossFire™ to function, the CrossFire™ bridge interconnects must correctly connect the CrossFire™ graphics cards. 1. Connect one end of the CrossFir e™ bridge interconnect to the internal VMO connection on one of the cards.
46 Determine the System Card Bus T ype There are two possible card bus types, A GP and PCIe™. If you have an AGP card you may need to update th e motherboard and chipset drivers. 1 Look at the motherboard and card. 2 Using the illustrat ion below for comparison, determ ine whether you have AGP or PCIe™ connectors.
47 AGP and PCIe™ graphics cards and system bus connectors 3 If you have AGP connectors and the graphics card is not working correctly , you may need to updat e the motherboard and chipset drivers for the computer . Up dating your AGP Motherboard/Chip set Drivers Note: This section applies o nly if yo u are inst alling an AGP graphics card.
48 • ALi GAR T Driver • AMD AGP Miniport • Intel VGAR T • VIA AGP Dri ver Obt ain AGP drivers for your motherboard/chip set If you experience problems with th e AGP chipset drivers, you may need a software update from the motherboar d or chipset manufacturer .
49 Reinst alling Drivers You can install new drivers or reinst all existing drivers if there was a Windows® conflict. Reinstall the drivers at any time using the ATISETUP utility located on the ATI installation CD.
50 Product Registration To activate your warranty and o btain product support through Customer Care, register your graphics card at: ati.amd.com/online/registration Customer Care If you require furthe.
51 Customer Care w ill work t o resolve your issue and help yo u to get th e graphics card product up and running. If your issue is not resolved, ou r technicians will determine whether the diffi culty you are experiencing is the result of the ATI product, whether the product contains a defect, and whether the product is under warranty.
52 Additional Accessories Additional and replacement cables, installation CD-ROMs, manuals, and other accessories for AMD products can be purchased from the online AMD store at: ati.amd.com/online/accessories Compliance Information This section details the complian ce information for thi s produ ct.
53 Industry Canada Compliance St atement ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme à la norme NMB -003 du Canada. For further compliance informat ion: Advanced Micro Devices , Inc.
54 W aste Electrical and Electronic Equipment (WEEE) Directive Compliance This product was manu fac tured by Advanced Micro Devices, Inc..
55 Index Numerics 102 part number 3 1080i 23 16:9 23 3D 37, 45 4:3 23 480i 23, 46 480p 23, 46 540p 23 720p 46 9-pin HDTV Output Cable 9 A Accessories 52 Adapters 9-Pin HDTV output cable 25 9-pin HDTV .
56 Drivers chipset 46 reinstalling 49 uninstall 4 DTV(HDMI) 21 DVD 1, 4, 45 DVI 19, 44, 45 DVI-to-HDTV adapter 8, 22 E Enable CrossFire 41 F F1 help 16 FCC Compliance 52 G games TV display 18 H HDMI 8.
57 Video 28, 44, 46 Video capture 10, 30 video capture 31 Video file conversion 32 VMO 45 Volume control 31 W Warranty 43, 51 Waste Electrical and Electronic Equipment (WEEE) Compliance 54 Windows 11,.
58.
Ein wichtiger Punkt beim Kauf des Geräts AMD HD 2400 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AMD HD 2400 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AMD HD 2400 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AMD HD 2400 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AMD HD 2400 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AMD HD 2400 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AMD HD 2400 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AMD HD 2400. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AMD HD 2400 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
