Benutzeranleitung / Produktwartung GA-H55M-S2 des Produzenten Gigabyte
Zur Seite of 80
GA-H55M-S2 LGA1 156 socket motherboard for Intel ® Core ™ i7 processors/Intel ® Core ™ i5 processors/Intel ® Core ™ i3 processors/Intel ® Pentium ® processors User's Manual Rev .
Jun. 21, 2010 Motherboard GA-H55M-S2 Motherboard Jun. 21, 2010 GA-H55M-S2.
Copyright © 2010 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
- 4 - T able of Contents Box Contents ................................................................................................................... 6 Optional Items ................................................................................
- 5 - Chapter 3 Drivers Installation ........................................................................................ 53 3-1 Installing Chipset Drivers ............................................................................... 53 3-2 Application Software .
- 6 - Box Contents GA-H55M-S2 motherboard Motherboard driver disk User's Manual T wo SA T A cables I/O Shield Optional Items 2-port USB 2.0 bracket (Part No.
- 7 - GA-H55M-S2 Motherboard Layout CPU_F AN LGA1 156 A TX F_AUDIO AUDIO M_BIOS PCIEX1 DDR3_1 DDR3_2 BA T F_P ANEL iTE IT8720 A TX_12V Intel ® H55 SA T A2_0 PCI1 CODEC B_BIOS F_USB2 VGA USB_LAN PCIEX.
- 8 - GA-H55M-S2 Motherboard Block Diagram CODEC PS/2 KB/Mouse LGA1 156 CPU DMI Interface Intel ® H55 2 PCI PCI Bus PCI CLK (33 MHz) PCIe CLK (100 MHz) PCI Express Bus iTE IT8720 CPU CLK+/- (133 MHz) 6 SA TA 3Gb/s 1 PCI Express x16 Dual BIOS 12 USB Ports LPC Bus DDR3 1666 (O.
- 9 - Hardware Installation 1- 1 Installation Pr ecautions Th e moth erb oa rd con ta ins nu mer ou s deli ca te ele ctr on ic cir cu its an d com pon ent s whi ch ca n become damaged as a result of electrostatic discharge (ESD).
- 10 - Hardware Installation 1- 2 Product Specications CPU Support for Intel ® Core ™ i7 processors/Intel ® Core ™ i5 processors/Intel ® Core ™ i3 processors/Intel ® Pentium ® processors in the LGA1 156 package (Go to GIGABYTE's website for the latest CPU support list.
- 1 1 - Hardware Installation (Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. (Note 2) T o use the onboard D-Sub port, you must install an Intel CPU with integrated graphics.
- 12 - Hardware Installation 1-3 Installing the CPU and C PU C ooler 1-3 -1 In sta lling t he CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
- 13 - Hardware Installation Step 1: Gently press the CPU socket lever handle down and away from the socket with your nger . Then completely lift the CPU socket lever and the metal load plate will be lifted as well. Step 3: Hold the CPU with your thumb and index ngers.
- 14 - Hardware Installation 1-3 -2 In sta lling t he CPU Cool er Follow the steps below to correctly install the CPU cooler on the motherboard. (The following procedure uses Intel ® boxed cooler as the example cooler .) Step 1: Apply an even and thin layer of thermal grease on the surface of the installed CPU.
- 15 - Hardware Installation 1- 4 -1 Dua l Channe l Mem or y Con gur atio n This motherboard provides two DDR3 m emory sockets and sup ports Dual Ch annel T echnology . After the memory is installed, the BIOS will automatically detect the specications and capacity of the memory .
- 16 - Hardware Installation 1- 4 -2 In stal ling a Me mor y Notch DDR3 DIMM A DDR3 memory module has a notch, so it can only t in one direction. Follow the steps below to correctly install your memory modules in the memory sockets. Step 1: Note the orientation of the mem ory module.
- 17 - Hardware Installation 1-5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.
- 18 - Hardware Installation 1-6 Back Panel Connectors PS/2 Keyboard and PS/2 Mouse Port Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard. D-Sub Port (Note) The D-Sub port supports a 15-pin D-Sub connector.
- 19 - Hardware Installation 1- 7 Inter nal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Bef ore instal ling the devices , b e s ure to tu rn off the devi ces and your c omput er .
- 20 - Hardware Installation DEBUG PO RT G.QBOFM 13 1 24 12 A TX A TX: Pin No. Denition 13 3.3V 14 -12V 15 GND 16 PS_ON (soft On/Off) 17 GND 18 GND 19 GND 20 -5V 21 +5V 22 +5V 23 +5V (Only for 2x12-pi n A TX) 24 GND ( On ly fo r 2 x1 2-p in A TX) Pin No.
- 21 - Hardware Installation 3/4) CPU_F AN/SYS_F AN (Fan Headers) The motherboard has a 4-pin CPU fan header (CPU_FAN) and a 3-pin system fan header (SYS_F AN). Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire).
- 22 - Hardware Installation 6) BA T (Battery) The battery provides power to keep the values (such as BIOS congurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost.
- 23 - Hardware Installation 7) F_P ANEL (Front Panel Header) Conne ct the po wer switch, reset switch , s peaker, c hassis intru sion switch/ sensor and system status indicator on the chassis to this header according to the pin assignments below . Note the positive and negative pins before connecting the cables.
- 24 - Hardware Installation 8) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel High Denition audio (HD) and AC'97 audio. Y ou may connect your chassis front panel audio module to this header. Make sure the wire assignments of the module con - nector match the pin assignments of the motherboard header .
- 25 - Hardware Installation 10) CLR_CMOS (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS congurations) and reset the CMOS values to factory defaults.
- 26 - Hardware Installation.
- 27 - BIOS Setup BIOS (Basic Input and Ou tput System) records hardware parameter s of the system in th e CM OS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system parameters and loading o perating system, etc.
BIOS Setup - 28 - 2-1 Startup Screen The following screens may appear when the computer boots. Function Keys: <DEL>: BIOS SETUP Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.
- 29 - BIOS Setup 2-2 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use ar- row keys to move among the items and press <Enter> to accept or enter a sub-menu.
BIOS Setup - 30 - The Functions of the <F1 1> and <F12> keys (For the Main Menu Only) F1 1: Save CMOS to BIOS This function allows you to save the current BIOS settings to a prole. Y ou can create up to 8 proles (Prole 1-8) and name each prole.
- 31 - BIOS Setup 2-3 MB Intelligent T weaker(M.I.T .) Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations. Incorrectly doing overclock/overvoltage may result in dam - age to CPU, chipset, or memory and reduce the useful life of these components.
BIOS Setup - 32 - CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being installed. CPU Frequency Displays the current operating CPU frequency . (Note) This item is present only if you install a CPU that supports this feature.
- 33 - BIOS Setup (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. C3/C6/C7 State Support (Note) Allows you to determine whether to let the CPU enter C3/C6/C7 mode in system halt state.
BIOS Setup - 34 - (Note) This item appears only if you install a memory module that supports this feature. Extreme Memory Prole (X.M.P .) (Note) Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled.
- 35 - BIOS Setup CMOS Setup Utility-Copyright (C) 1984-2010 A ward Software Advanced Memory Settings higf : Move Enter: Select +/-/PU/PD: V alue F10: Save ESC: Exit F1: General Help F5: Previous V alues F6: Fail-Safe Defaults F7: Optimized Defaults Item Help Menu Level ExtremeMemoryProle(X.
BIOS Setup - 36 - >>>>> Channel A/B T iming Settings >>>>> Channel A/B Standard T iming Control CAS Latency Time Options are: Auto (default), 5~15. tRCD Options are: Auto (default), 1~15. tRP Options are: Auto (default), 1~15.
- 37 - BIOS Setup tRTP Options are: Auto (default), 1~15. t FAW Options are: Auto (default), 1~63. Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A/B Misc T iming Control Static tRD Options are: Auto (default), 1~31.
BIOS Setup - 38 - Miscellaneous Settings CMOS Setup Utility-Copyright (C) 1984-2010 A ward Software Miscellaneous Settings Isochronous Support [Enabled] V irtualization T echnology (Note) [Enabled.
- 39 - BIOS Setup Date (mm:dd:yy) Sets the system date. The date format is week (read-only), month, date and year . Select the desired eld and use the up arrow or down arrow key to set the date. Time (hh:mm:ss) Sets the system time. For example, 1 p.
BIOS Setup - 40 - Landing Zone Landing zone. Sector Number of sectors. Halt On Allows you to determine whether the system will stop for an error during the POST . All Errors Whenever the BIOS detects a non-fatal error the system boot will stop. No Errors The system boot will not stop for any error.
- 41 - BIOS Setup (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. 2-5 Advanced BIOS Features Hard Disk Boot Priority Species the sequence of loading the operating system from the installed hard drives.
BIOS Setup - 42 - Limit CPUID Max. to 3 (Note) Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP operating system; set this item to Enabled for legacy operating system such as Windows NT4.
- 43 - BIOS Setup 2-6 Integrated Peripherals SA T A AHCI Mode (Intel H55 Chipset) Allows you to decide whether to congure the SA T A controllers integrated in the Intel H55 Chipset to AHCI mode. IDE Congures the SA T A controllers to IDE mode. (Default) AHCI Congures the SA T A controllers to AHCI mode.
BIOS Setup - 44 - Azalia Codec Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled . Onboard H/W LAN Enables or disables the onboard LAN function.
- 45 - BIOS Setup Onboard LAN Boot ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) When a Cable Problem Occurs... If a cable problem occurs on a specied pair of wires, the Status eld will show Short and then length shown will be the approximate distance to the fault or short.
BIOS Setup - 46 - ACPI Suspend T ype Species the ACPI sleep state when the system enters suspend. S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep state, the system appears suspended and stays in a low power mode.
- 47 - BIOS Setup (Note) Supported on Windows 7/Vista operating system only . Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Date (of Month) Alarm: Turn on the system at a specic time on each day or on a specic day in a month.
BIOS Setup - 48 - Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Opened eld will show "No" at next boot.
- 49 - BIOS Setup CPU Smart F AN Mode Species how to control CPU fan speed. This item is congurable only if CPU Smart FAN Control is set to Enabled . Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU fan control mode.
BIOS Setup - 50 - Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard.
- 51 - BIOS Setup Press <Enter> on this item and type the password with up to 8 characters and then press <Enter>. Y ou will be requested to conrm the password.
BIOS Setup - 52 - Press <Enter> on this item and press the <Y> key . This saves the changes to the CMOS and exits the BIOS Setup program. Press <N> or <Esc> to return to the BIOS Setup Main Menu. 2-12 Save & Exit Setup Press <Enter> on this item and press the <Y> key .
- 53 - Drivers Installation 3-1 Installing Chipset Drivers Chapter 3 Drivers Installation • Before installing the drivers, rst install the operating system. • After installing the operating system, insert the motherboard driver disk into your optical drive.
Drivers Installation - 54 - 3-2 Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software.
- 55 - Drivers Installation 3-4 Contact For the detailed contact information of the GIGABYTE T aiwan headquarter or worldwide branch ofces, click the URL on this page to link to the GIGABYTE website. 3-5 System This page provides the basic system information.
Drivers Installation - 56 - 3-6 Download Center T o update the BIOS, driver s, or applications, click the Download Center button to link to the GIGABYTE website.
- 57 - Unique Features 4-1 Xpress Recovery2 Chapter 4 Unique Features Xp re ss Re co v er y2 is a u ti l it y t h at al lo ws yo u t o qui c kl y c o mp re ss an d back up your system data and perform restoration of it.
Unique Features - 58 - Step 3: Wh en pa rt it io ni ng yo ur ha rd dr iv e, ma ke su re to leave unallocated space (10 GB or more is recom- mended; actual size requirements vary , depending on the amount of data) and begin the installation of the operating system.
- 59 - Unique Features D. Using the Restore Function in Xpress Recovery2 E. Removing the Backup F . Exiting Xpress Recovery2 Sel ec t RESTORE t o rest ore the bac ku p t o your har d d riv e in case the system breaks down. The RESTORE option will not be present if no backup is created before.
Unique Features - 60 - 4-2 BIOS Update Utilities GI GA BY TE mo th er bo ar ds pro vi de tw o uni qu e BIO S u pd at e too ls , Q-F la sh ™ and @BI OS ™ . GIG AB YT E Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mod e.
- 61 - Unique Features Q-Flash Utility v2.15 Flash T ype/Size................................. MXIC 25L8005/8006 1M Keep DMI Data Enable Load CMOS Default Enable Update BIOS from Drive Save BIOS to Drive Enter : Run hi :Move ESC:Reset F10:Power Of f B.
Unique Features - 62 - Step 4: Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should see the new BIOS version is present on the POST screen. Step 5: During the POST , press <Delete> to enter BIOS Setup.
- 63 - Unique Features 4-2-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin 1. In Windows, close all applications and TSR (T erminate and Stay Resident) programs.
Unique Features - 64 - 4-3 EasyT une 6 GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to ne-tune their system settings or do overclock/overvoltage in Windows environment.
- 65 - Unique Features 4-4 Q-Share Q-Share is an easy and convenient data sharing too l. After conguring your LAN connection settings and Q-Share, you are able to share your data with computers on the same network, making full use of Internet resources.
- 66 - Unique Features 4-5 Auto Green Auto Green is an easy-to-use tool that provides users with simple options to enable system power savings via a Bluetooth cell phone. When the phone is out of the range of the computer's Bluetooth receiver , the sys- tem will enter the specied power saving mode.
- 67 - Appendix 5-1 Conguring Audio Input and Output 5-1-1 Conguring 2/4/5.1/7.1-Channel Audio The motherboard provides three audio jacks on the back panel which support 2/4/5.1/7.1 (Note) -channel audio. The picture to the right shows the default audio jack assignments.
Appendix - 68 - The pictu res to t he right show the 7.1-ch annel spe aker congurations. 7.1-Channel Speakers: Center/Subwoofer Speaker Out Front Speaker Out Rear Speaker Out Side Speaker Out Step 2: Connect an audio device to an audio jack. The The cur- rent connected device is dialog box appears.
- 69 - Appendix If your chassis provides an AC'97 front panel audio mod- ule, to activate the AC'97 functionality , click the tool icon on the Spe ake r Conf igu ra tio n t ab . O n the Conn ect or Settings dialog box, select the Disable front panel jack detection check box.
Appendix - 70 - 5-1-2 Conguring Microphone Recording Step 1: After installing the audio driver , the HD Audio Manager icon will appear in the notication area. Double-click the icon to access the HD Audio Manager . Step 2: Connect your microphone to the Mic in jack (pink) on th e b ac k pan el or the Mic in jac k (pi nk) on th e f ro nt panel.
- 71 - Appendix Step 4: T o ra i se th e re co r di n g and p la y ba c k v o lu m e f o r th e microphone, click the Microphone Boost icon on the right of the Recor ding V olume slider and set the Microphone Boost level.
Appendix - 72 - Step 3: When the Stereo Mix item appears, right-click on this item and select Enable . Then set it as the default de- vice. Step 4: Now you can access the HD Audio Manager to cong - ure Stereo Mix and use Sound Recorder to record the sound.
- 73 - Appendix 5-2 T roubleshooting 5-2-1 Frequently Asked Questions T o read more F AQs for your motherboard, please go to the Support&DownloadsMotherboardF AQ page on GIGABYTE's website. Q: In the BIOS Setup program, why are some BIOS options missing? A: Some advanced options are hidden in the BIOS Setup program.
Appendix - 74 - 5-2-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. ST AR T A Turn off the power. Remove all peripherals, connecting cables, and power cord etc.
- 75 - Appendix The power supply , CPU or CPU socket might fail. The keyboard or keyboard connector might fail. END A Turn off the computer . Plug in the keyboard and mouse and restart the computer . The graphics card, expansion slot, or monitor might fail.
Appendix - 76 - 5-3 Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
- 77 - Appendix Finally , we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly .
Appendix - 78 -.
- 79 - Appendix Contact Us • GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4000 F AX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www .
Appendix - 80 - • G.B.T . TECHNOLOGY TRADING GMBH - Germany WEB address : http://www .gigabyte.de • G.B.T . TECH. CO., L TD. - U.K. WEB address : http://www .giga-byte.co.uk • Giga-Byte T echnology B.V . - The Netherlands WEB address : http://www .
Ein wichtiger Punkt beim Kauf des Geräts Gigabyte GA-H55M-S2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Gigabyte GA-H55M-S2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Gigabyte GA-H55M-S2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Gigabyte GA-H55M-S2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Gigabyte GA-H55M-S2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Gigabyte GA-H55M-S2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Gigabyte GA-H55M-S2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Gigabyte GA-H55M-S2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Gigabyte GA-H55M-S2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
