Bedienungsanleitung Gigabyte GA-F2A88XM-D3H Hauptplatine

Zusammenfassung des Inhalts auf den nächsten Seiten der Bedienungsanleitung

Seite 1

GA-F2A88XM-D3H User's Manual Rev . 30 01 1 2ME -F288M3H-300 1R.
Seite 2

Motherboard GA-F2A88XM-D3H Aug. 19, 2013 Aug. 19, 2013 Motherboard GA-F2A88XM-D3H.
Seite 3

Copyright © 2013 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Seite 4

- 4 - T able of Contents Box Contents ................................................................................................................... 6 Optional Items ................................................................................
Seite 5

- 5 - Chapter 4 Drivers Installation ........................................................................................ 69 4-1 Installing Chipset Drivers ............................................................................... 69 4-2 Application Software .
Seite 6

- 6 - Box Contents 5 GA-F2A88XM-D3H motherboard 5 Motherboard driver disk 5 User's Manual 5 Quick Installation Guide 5 Four SA T A cables 5 I/O Shield Optional Items  2-portUSB2.0bracket(PartNo.12CR1-1UB030-6*R)  eSA T A bracket(PartNo.
Seite 7

- 7 - GA-F2A88XM-D3H Motherboard Layout KB_MS_USB CPU_F AN SYS_F AN1 Socket FM2+ AT X F_USB30 AUDIO DDR3_4 DDR3_2 DDR3_3 DDR3_1 B AT A TX_12V AMD A88X CODEC CLR_CMOS M_BIOS B_BIOS DVI_VGA USB_LAN Real.
Seite 8

- 8 - GA-F2A88XM-D3H Motherboard Block Diagram Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications." AMD APU UMI APUCLK+/-(100MHz) Dual Channel Memory PCI Express Bus PCI Express Bus COM LPC Bus 1 PCI PCI Bus Dual BIOS PCI CLK (33MHz) PCIe CLK (100MHz) PS/2 KB/Mouse 8 USB 2.
Seite 9

- 9 - Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damagedas aresultof electrostaticdischarge (ESD).
Seite 10

- 10 - Hardware Installation 1-2 ProductSpecications APU  FM2+ Socket: - AMD A series processors - AMD Athlon ™ series processors ( Go to GIGABYTE's website for the latest CPU support list.
Seite 11

- 1 1 - Hardware Installation Storage Interface  Chipset: 8 x SA T A 6Gb/s connectors - Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD USB  Chipset: - 4 USB 3.0/2.0 ports ( 2 ports on the back panel, 2 ports available through the internal USB header ) - 8 USB 2.
Seite 12

- 12 - Hardware Installation Unique Features  Support for @BIOS  Support for Q-Flash  Support for Xpress Install  Support for EasyTune * Available functions in EasyTune may differ by motherboard model.
Seite 13

- 13 - Hardware Installation 1-3 Installing the APU and APU Cooler 1-3-1 Installing the APU A. Locatethepinone(denotedbyasmalltriangle)ofthe APUsocketandthe APU. Read the following guidelines before you begin to install the APU: • Make sure that the motherboard supports the APU.
Seite 14

- 14 - Hardware Installation B. Follow the steps below to correctly install the APU into the motherboard APU socket. • Before installing the APU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the APU.
Seite 15

- 15 - Hardware Installation 1-3-2 Installing the CPU Cooler Follow the steps below to correctly install the APU cooler on the motherboard. Use extreme care when removing the APU cooler because the thermal grease/tape between the APU cooler and APU may adhere to the APU.
Seite 16

- 16 - Hardware Installation 1-4 Installing the Memory Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory . It is recommended that memory of the same capacity , brand, speed, and chips be used.
Seite 17

- 17 - Hardware Installation 1-4-2 Installing a Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs.
Seite 18

- 18 - Hardware Installation 1-5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.
Seite 19

- 19 - Hardware Installation 1-6 Setupofthe AMDDualGraphicsConguration Combining the onboard GPU with a discrete graphics card, AMD's Dual Graphics technology can provide signicantlyadvanceddisplayperformanceforAMDplatform.
Seite 20

- 20 - Hardware Installation 1-7 Back Panel Connectors USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a USB keyboard/mouse,USBprinter ,USBashdriveandetc.
Seite 21

- 21 - Hardware Installation Optical S/PDIF Out Connector This connector provides digital audio out to an external audio system that supports digital optical audio. Before using this feature, ensure that your audio system provides an optical digital audio in connector .
Seite 22

- 22 - Hardware Installation 1-8 Internal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer .
Seite 23

- 23 - Hardware Installation 1/2) A TX_12V/A TX (2x4 12V Power Connector and 2x12 Main Power Connector)  With the use of the power connector , the power supply can supply enough stable power to all the components onthe motherboard.
Seite 24

- 24 - Hardware Installation • Be sure to connect fan cables to the fan headers to prevent your APU and system from overheating. Overheating may result in damage to the APU or the system may hang. • These fan headersare not conguration jumper blocks.
Seite 25

- 25 - Hardware Installation 6) SA T A3 0/1/2/3/4/5/6/7 (SA T A 6Gb/s Connectors) The SA T A connectors conform to SA T A 6Gb/s standard and are compatible with SA T A 3Gb/s and SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device.
Seite 26

- 26 - Hardware Installation 8) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, speaker , chassis intrusion switch/sensor and system status indicator onthe chassistothisheader accordingtothe pinassignmentsbelow .
Seite 27

- 27 - Hardware Installation 9) F_AUDIO (Front Panel Audio Header)  The frontpanel audio headersupports IntelHigh Denitionaudio (HD)and AC'97audio. Y oumay connect your chassis front panel audio module to this header .
Seite 28

- 28 - Hardware Installation 12) F_USB1/F_USB2 (USB 2.0/1.1 Headers)  Theheadersconform toUSB 2.0/1.1 specication.Each USBheader canprovide twoUSB portsvia an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer .
Seite 29

- 29 - Hardware Installation 13) COM (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer .
Seite 30

- 30 - Hardware Installation 20 19 2 1 F_USB30 F_AUDIO(H) DB_PORT F_ PA NEL(NH) F_ PA NEL (H61M-D2) ACPI_CPT (GA-IVB) BIOS_PH (GA-IVB) SMB_CPT (GA-IVB) CLR_CMOS CI DIS_ME GP15_CPT (GA-IVB) XDP_CPU XDP.
Seite 31

- 31 - BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard.
Seite 32

BIOS Setup - 32 - 2-1 Startup Screen The following startup Logo screen will appear when the computer boots. FunctionKeys: <DEL>:BIOSSETUPQ-FLASH  Pressthe<Delete>keytoenterBIOSSetuportoaccesstheQ-FlashutilityinBIOSSetup.
Seite 33

- 33 - BIOS Setup 2-2 The Main Menu Onthemain menuoftheBIOS Setupprogram,pressarrow keystomoveamong theitemsandpress<Enter> to accept or enter a sub-menu. Or you can use your mouse to select the item you want.
Seite 34

BIOS Setup - 34 - BIOS Setup Menus  M.I.T .  Use thismenu tocongure theclock, frequency , andvoltagesof yourCPU and memory ,etc. Orcheck the system/CPU temperatures, voltages, and fan speeds.
Seite 35

- 35 - BIOS Setup 2-3 M.I.T . Whetherthesystemwill workstablywiththeoverclock/overvoltage settingsyoumadeis dependent onyouroverallsystem congurations.
Seite 36

BIOS Setup - 36 - ` M.I.T . Current Status This screen provides information on CPU/memory frequencies/parameters. ` Advanced Frequency Settings & BCLK/PCIe Clock Control  Allowsyou tomanually setthe CPU baseclock andPCIe bus frequencyin 1 MHzincrements.
Seite 37

- 37 - BIOS Setup (Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature. & CPU Clock Ratio, CPU Frequency The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu.
Seite 38

BIOS Setup - 38 - & CPU Core Control Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS toenable allCPUcores (numberof coresavailabledepends ontheCPU beingused).
Seite 39

- 39 - BIOS Setup ` Advanced Memory Settings & ExtremeMemoryProle(X.M.P .) (Note) , System Memory Multiplier , Memory Frequency(MHz) The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu.
Seite 40

BIOS Setup - 40 - This sub-menu provides memory timing settings for each channel of memory . The respective timing setting screensare congurableonlywhen DRAM Timing Selectable is set to Q uick or Expert .Note:Y oursystem may become unstable or fail to boot after you make changes on the memory timings.
Seite 41

- 41 - BIOS Setup ` PC Health Status & Reset Case Open Status  Disabled Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default)  Enabled Clears the record of previous chassis intrusion status and the Case Open  eld will show "No"atnextboot.
Seite 42

BIOS Setup - 42 - & CPU Vcore/Dram V oltage/+3.3V/+5V/+12V Displays the current system voltages. & CPU/System T emperature Displays current CPU/system temperature. & CPU/System Fan Speed Displays current CPU/system fan speeds. & CPU W arning T emperature  Sets thewarning thresholdfor CPUtemperature.
Seite 43

- 43 - BIOS Setup 2-4 System Information This section provides information on your motherboard model and BIOS version. Y ou can also select the default language used by the BIOS and manually set the system time. & System Language Selects the default language used by the BIOS.
Seite 44

BIOS Setup - 44 - 2-5 BIOS Features & Boot Option Priorities  Speciesthe overall boot order from the available devices. For example, you can set hard drive as the rstpriority( Boot Option #1 )andDVDROMdriveas thesecondpriority( Boot Option #2 ).
Seite 45

- 45 - BIOS Setup & OS T ype  Allowsyoutoselecttheoperatingsystemtobeinstalled.(Default:OtherOS) & CSM Support  EnablesordisablesUEFICSM(CompatibilitySupportModule)tosupportalegacyPCbootprocess.
Seite 46

BIOS Setup - 46 - & User Password  Allowsyoutocongure auserpassword.Press<Enter>onthis item,typethepassword,andthenpress <Enter>. Y ou will be requested to conrm the password.
Seite 47

- 47 - BIOS Setup 2-6 Peripherals & IOMMU  Enablesordisables AMDIOMMUsupport.(Default:Disabled) & OnChip SA T A Channel  EnablesordisablestheintegratedSA T A controllers.
Seite 48

BIOS Setup - 48 - & Legacy USB Support  AllowsUSBkeyboard/mousetobeusedinMS-DOS.(Default:Enabled) & XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support.
Seite 49

- 49 - BIOS Setup  SB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the SouthBridgeastherstdisplay .
Seite 50

BIOS Setup - 50 - ` SuperIOConguration  This section provides information on the super I/O chip and allows you to congure the serial port and parallel port. & Serial Port A  Enablesordisablestheonboardserialport.
Seite 51

- 51 - BIOS Setup 2-7 Power Management (Note) SupportedonWindows8/7operatingsystemonly . & Resume by Alarm  Determineswhethertopoweronthesystematadesiredtime.
Seite 52

BIOS Setup - 52 - & Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event.  Note:T ousethisfunction,youneedan A TXpowersupplyprovidingatleast1A onthe+5VSBlead.
Seite 53

- 53 - BIOS Setup 2-8 Save & Exit & Save & Exit Setup  Press <Enter>on thisitem and select Yes . This saves the changes to the CMOS and exits the BIOS Setup program. Select No orpress<Esc>toreturntotheBIOSSetupMainMenu.
Seite 54

BIOS Setup - 54 -.
Seite 55

- 55 - Conguring SA T A Hard Drive(s) Chapter3 ConguringSA T A HardDrive(s) (Note1) SkipthisstepifyoudonotwanttocreateRAIDarrayontheSA T Acontroller . (Note2) RequiredwhentheSA T Acontrollerissetto AHCIorRAIDmode.
Seite 56

Conguring SA T A Hard Drive(s) - 56 - Step 2: Ifyou wantto congureUEFI RAID,follow thestepsin "C-1." T oenter thelegacyRAID ROM,save thesettings and exit BIOS Setup. Refer to "C-2" for more information.
Seite 57

- 57 - Conguring SA T A Hard Drive(s) C-1.UEFIRAIDConguration ThismodesupportsWindows864-bitinstallationonly . T o congure UEFI RAID, you need .
Seite 58

Conguring SA T A Hard Drive(s) - 58 - Figure 5 Creating a RAID Array T o create a RAID array , refer to the following examples to enter the commands and press <Enter>. When succeeded, the message which says "created sucessfully" will appear .
Seite 59

- 59 - Conguring SA T A Hard Drive(s) T oexittheUEFIRAIDutility ,enter"exit"andpress<Enter>. Deleting an Array T odeleteanarray ,enterthefollowingcommandsandpress<Enter>.
Seite 60

Conguring SA T A Hard Drive(s) - 60 - C-2.ConguringLegacyRAIDROM Enter the legacy RAIDBIOS setup utility to congure a RAID array .Skip this step and proceed with the installation  ofWindowsoperatingsystemforanon-RAIDconguration.
Seite 61

- 61 - Conguring SA T A Hard Drive(s) First, select a RAIDmode and press<Enter>. The selections available dependon the numberof thehard drives being installed. Then follow the on-screen instructions to specifythe array size.
Seite 62

Conguring SA T A Hard Drive(s) - 62 - Figure 12 AMD-RAID Array Conguration (Build: 6.1.1-00075) Arrays Create Array < h >< i >< f >< g >=Choose, <Esc>=Back <Ente.
Seite 63

- 63 - Conguring SA T A Hard Drive(s) Deleting an Array The Delete Array(s) menu option allows for deletion of disk array assignments. 1. Select Delete Array(s) in the Main Menu andpress<Enter>.
Seite 64

Conguring SA T A Hard Drive(s) - 64 - 3-2 Installing the SA T A RAID/AHCI Driver and Operating System WiththecorrectBIOSsettings,youarereadytoinstalltheoperatingsystem. A. Installing Windows 8/7 (ThefollowinginstructionsuseWindows8astheexampleoperatingsystem.
Seite 65

- 65 - Conguring SA T A Hard Drive(s) Figure 2 B. Installing Windows XP (32-bit) Before installing WindowsXP , connect aUSB oppy disk drive to yourcomputer.
Seite 66

Conguring SA T A Hard Drive(s) - 66 - Figure 3 RefertothefollowingforinstallingthedriverduringtheWindowssetupprocess.
Seite 67

- 67 - Conguring SA T A Hard Drive(s) RebuildinganArray: Rebuilding is the process of restoring data to a hard drive from other drives in the array . Rebuilding applies only to fault-tolerant arrays such as RAID 1, RAID 5, and RAID 10 arrays.
Seite 68

Conguring SA T A Hard Drive(s) - 68 -.
Seite 69

- 69 - Drivers Installation Chapter 4 Drivers Installation 4-1 Installing Chipset Drivers • Before installing the drivers, rst install the operating system. (The following instructions use Windows8astheexampleoperatingsystem.
Seite 70

Drivers Installation - 70 - 4-2 Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software. Y ou can click the Install button on the right of an item to install it. 4-3 T echnical Manuals This page provides the content descriptions for this driver disk.
Seite 71

- 71 - Drivers Installation 4-4 Contact For thedetailed contact informationof the GIGABYTET aiwan headquarter orworldwide branch ofces,click the URL on this page to link to the GIGABYTE website. 4-5 System This page provides the basic system information.
Seite 72

Drivers Installation - 72 - 4-6 Download Center T o update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE website.
Seite 73

- 73 - Unique Features 5-1 BIOS Update Utilities GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash ™ and @BIOS ™ . GIGABYTE Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mode.
Seite 74

Unique Features - 74 - Q-Flash Utility v1.05 Model Name : F2A88XM-D3H BIOS V ersion : E4 BIOS Date : 08/08/2013 Flash T ype/Size : MXIC 25L6465E/6406E 8MB Update BIOS From Drive Save BIOS to Drive Return to BIOS setup Select Device USB Flash Drive B.
Seite 75

- 75 - Unique Features Step 4: DuringthePOST , press<Delete>toenterBIOSSetup. Select Load Optimized Defaults on the Save & Exit screen and press <Enter> to load BIOSdefaults.
Seite 76

Unique Features - 76 - 5-1-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin 1. In Windows,closeallapplicationsandTSR(T erminateand StayResident)programs.Thishelpsprevent unexpected failures when performing a BIOS update.
Seite 77

- 77 - Unique Features 5-2 EasyT une 6 GIGABYTE's EasyT une 6 is a simple and easy-to-use interface that allows users to ne-tune their system settings or do overclock/overvoltage in Windows environment.
Seite 78

Unique Features - 78 - 5-3 Smart Recovery 2 SmartRecovery2 allowsyoutoback upapartitionasan imageleeveryhour.Y oucanusethese imagesto restoreyoursystemorleswhenneeded.
Seite 79

- 79 - Unique Features Recovering your system with Smart Recovery 2 (Windows 8/7 only): Steps: 1. Click the File Recovery button on the main menu. 2. Select the location where your backup is saved. 3. Use the time slider to select a time point.
Seite 80

Unique Features - 80 -.
Seite 81

- 81 - Appendix 6-1 Conguring AudioInputandOutput Chapter 6 Appendix HighDenitionAudio(HD Audio) HD Audioincludesmultiple highqualitydigital-to-analogconverters (DACs).
Seite 82

Appendix - 82 - The pictures to the right show the 7.1-channel speaker congurations. 7.1-Channel Speakers: Center/Subwoofer Speaker Out Front Speaker Out Rear Speaker Out Side Speaker Out Step 2: Connect an audio device to an audio jack. The The current connected device is dialog box appears.
Seite 83

- 83 - Appendix If your chassis provides an AC'97 front panel audio module, to activate the AC'97 functionality , click the tool icon on the Speaker Conguration tab. On the Connector Settings dialog box, select the Disable front panel jack detection check box.
Seite 84

Appendix - 84 - 6-1-2 ConguringS/PDIFOut The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality .
Seite 85

- 85 - Appendix 6-1-3 ConguringMicrophoneRecording Step 2: Connectyour microphoneto theMic injack (pink)on the back panel or the Mic in jack (pink) on the front panel. Thencongurethejackformicrophonefunctionality .
Seite 86

Appendix - 86 - Step 5: T o open the Sounder Recorder , move the mouse cursor to the bottom left corner of the screen, click the Start icon to switch to the Start screen (orpressthe Windows button on the keyboard).
Seite 87

- 87 - Appendix 6-1-4 Using the Sound Recorder A. Recording Sound 1. Makesureyouhaveconnectedthesoundinputdevice(e.g.microphone)tothecomputer. 2. T o record the audio, click the Start Recording button . 3. T o stop recording audio, click the Stop Recording button .
Seite 88

Appendix - 88 - 6-2 T roubleshooting 6-2-1 Frequently AskedQuestions T o read more F AQs for your motherboard, please go to the Support& DownloadsF AQ page on GIGABYTE's website.
Seite 89

- 89 - Appendix 6-2-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. ST ART A Turn of f the power. Remove all peripherals, connecting cables, and power cord etc.
Seite 90

Appendix - 90 - If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the Support & DownloadsT echnical Support page to submit your question. Our customer service staff will reply you as soon as possible.
Seite 91

- 91 - Appendix Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a thirdparty norbe usedfor anyunauthorized purpose.
Seite 92

Appendix - 92 -.
Seite 93

- 93 - Appendix.
Seite 94

Appendix - 94 -.
Seite 95

- 95 - Appendix Contact Us • GIGA-BYTE TECHNOLOGY CO., L TD. Address:No.6,BaoChiangRoad,Hsin-TienDist., NewT aipeiCity231,T aiwan TEL: +886-2-8912-4000 F AX: +886-2-8912-4005 T ech.andNon-T ech.Support(Sales/Marketing): http://ggts.
Seite 96

Appendix - 96 - • GIGABYTE Global Service System T osubmit a technicalor non-technical(Sales/Marketing) question, please link to: http://ggts.gigabyte.com.tw Then select your language to enter the system. • G.B.T . TECHNOLOGY TRADING GMBH - Germany WEBaddress:http://www .

Lesen Sie die Bedienungsanleitung Gigabyte GA-F2A88XM-D3H - vermeiden Sie Probleme

Ein wichtiger Punkt beim Kauf des Geräts Gigabyte GA-F2A88XM-D3H (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:

um zu wissen, wie man das Gerät richtig nutzt
um zu wissen, wie man es wartet/ eine jährliche technische Überprüfung des Produkts Gigabyte GA-F2A88XM-D3H durchführt
um zu wissen, wie man im Fall einer Störung mit Gigabyte GA-F2A88XM-D3H umgehen soll

Wenn Sie Gigabyte GA-F2A88XM-D3H noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Gigabyte GA-F2A88XM-D3H - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Gigabyte GA-F2A88XM-D3H reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Gigabyte GA-F2A88XM-D3H erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.

Wenn Sie aber schon Gigabyte GA-F2A88XM-D3H besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Gigabyte GA-F2A88XM-D3H verkürzen könnten.

Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Gigabyte GA-F2A88XM-D3H. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Gigabyte GA-F2A88XM-D3H gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.

Gigabyte GA-F2A88XM-D3H Bedienungsanleitung

URL teilen

Ähnliche Anleitungen

URL teilen

Ähnliche Anleitungen

Zusammenfassung des Inhalts auf den nächsten Seiten der Bedienungsanleitung

Seite 1

Seite 2

Seite 3

Seite 4

Seite 5

Seite 6

Seite 7

Seite 8

Seite 9

Seite 10

Seite 11

Seite 12

Seite 13

Seite 14

Seite 15

Seite 16

Seite 17

Seite 18

Seite 19

Seite 20

Seite 21

Seite 22

Seite 23

Seite 24

Seite 25

Seite 26

Seite 27

Seite 28

Seite 29

Seite 30

Seite 31

Seite 32

Seite 33

Seite 34

Seite 35

Seite 36

Seite 37

Seite 38

Seite 39

Seite 40

Seite 41

Seite 42

Seite 43

Seite 44

Seite 45

Seite 46

Seite 47

Seite 48

Seite 49

Seite 50

Seite 51

Seite 52

Seite 53

Seite 54

Seite 55

Seite 56

Seite 57

Seite 58

Seite 59

Seite 60

Seite 61

Seite 62

Seite 63

Seite 64

Seite 65

Seite 66

Seite 67

Seite 68

Seite 69

Seite 70

Seite 71

Seite 72

Seite 73

Seite 74