Bedienungsanleitung Gigabyte GA-F2A78M-D3H (rev. 3.0) Hauptplatine

Zusammenfassung des Inhalts auf den nächsten Seiten der Bedienungsanleitung

Seite 1

GA-F2A78M-D3H User's Manual Rev . 30 01 1 2ME -F27 8M3H-3001 R.
Seite 2

Motherboard GA-F2A78M-D3H Dec. 12, 2013 Dec. 12, 2013 Motherboard GA-F2A78M-D3H.
Seite 3

Copyright © 2013 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Seite 4

- 4 - T able of Contents Box C ontent s ................................................................................................................... 6 Optional Items ..............................................................................
Seite 5

- 5 - Chapter 4 Dri vers Installation ....................................................................................... 69 4 - 1 Inst alling Chipset Dr ivers ............................................................................... 69 4-2 A pplication Soft ware .
Seite 6

- 6 - Bo x Content s 5 GA-F2A78M-D3H motherboard 5 Motherboard driver disk 5 User's Manual 5 Quick Installation Guide 5 Four SA T A cables 5 I/O Shield Optional I tems  2-portUSB2.0bracket(PartNo.12CR1-1UB030-6*R)  eSA T A bracket(PartNo.
Seite 7

- 7 - GA-F2A7 8M -D3H Motherboard La yo ut KB_MS_USB CPU_F AN SYS_F AN1 Socket FM2+ AT X F_USB30 AUDIO DDR3_4 DDR3_2 DDR3_3 DDR3_1 B AT A TX_12V AMD A78 CODEC CLR_CMOS M_BIOS B_BIOS DVI_VGA USB_LAN Re.
Seite 8

- 8 - GA- F 2 A 78M- D3H Mother board B lock Diagram Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications.
Seite 9

- 9 - Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damagedas aresultof electrostaticdischarge (ESD).
Seite 10

- 10 - Hardware Installation 1-2 ProductSpecications APU  FM2+ Socket: - AMD A series processors - AMD Athlon ™ series processors (GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.) Chipset  AMD A78 Memory  4 x 1.
Seite 11

- 1 1 - Hardware Installation Storage Interface  Chipset: - 6 x SA TA 6Gb/s connectors - Support for RAID 0, RAID 1, RAID 10, and JBOD USB  Chipset: -  4 xUSB3.0/2.0ports(2ports onthebackpanel,2 portsavailablethrough theinternalUSBheader) -  8 xUSB2.
Seite 12

- 12 - Hardware Installation Unique Features  Support for @BIOS  Support for Q-Flash  SupportforXpressInstall  Support for EasyTune * AvailablefunctionsinEasyTunemaydif ferbymotherboardmodel.
Seite 13

- 13 - Hardware Installation 1-3 Installing the APU and APU Cooler 1-3-1 Installing the APU A. Locatethepinone(denotedbyasmalltriangle)ofthe APUsocketandthe APU. Read the following guidelines before you begin to install the APU: • Make sure that the motherboard supports the APU.
Seite 14

- 14 - Hardware Installation B. Follow the steps below to correctly install the APU into the motherboard APU socket. • Before installing the APU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the APU.
Seite 15

- 15 - Hardware Installation 1-3-2 Installing the APU Cooler Follow the steps below to correctly install the APU cooler on the motherboard. Use extreme care when removing the APU cooler because the thermal grease/tape between the APU cooler and APU may adhere to the APU.
Seite 16

- 16 - Hardware Installation 1-4 Installing the Memory Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory . It is recommended that memory of the same capacity , brand, speed, and chips be used.
Seite 17

- 17 - Hardware Installation 1-4-2 Installing a Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs.
Seite 18

- 18 - Hardware Installation 1-5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.
Seite 19

- 19 - Hardware Installation 1-6 Setupofthe AMDDualGraphicsConguration (Note) Make sure the drivers for the Chipset, onboard graphics, and external graphics card are properly installed.
Seite 20

- 20 - Hardware Installation 1-7 Back Panel Connectors USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a USB keyboard/mouse,USBprinter ,USBashdriveandetc.
Seite 21

- 21 - Hardware Installation Optical S/PDIF Out Connector This connector provides digital audio out to an external audio system that supports digital optical audio. Before using this feature, ensure that your audio system provides an optical digital audio in connector .
Seite 22

- 22 - Hardware Installation 1-8 Internal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer .
Seite 23

- 23 - Hardware Installation 1/2) A TX_12V/A TX (2x4 12V Power Connector and 2x12 Main Power Connector)  With the use of the power connector , the power supply can supply enough stable power to all the components onthe motherboard.
Seite 24

- 24 - Hardware Installation • Be sure to connect fan cables to the fan headers to prevent your APU and system from overheating. Overheating may result in damage to the APU or the system may hang. • These fan headersare not conguration jumper blocks.
Seite 25

- 25 - Hardware Installation 6) SA T A3 0/1/2/3/4/5 (SA T A 6Gb/s Connectors) The SA T A connectors conform to SA T A 6Gb/s standard and are compatible with SA T A 3Gb/s and SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device.
Seite 26

- 26 - Hardware Installation The front panel design may differ by chassis. A front panel module mainly consists of power switch, resetswitch,powerLED, harddriveactivityLED,speakerandetc.
Seite 27

- 27 - Hardware Installation 9) F_AUDIO (Front Panel Audio Header)  The frontpanel audio headersupports IntelHigh Denitionaudio (HD)and AC'97audio. Y oumay connect your chassis front panel audio module to this header .
Seite 28

- 28 - Hardware Installation 12) F_USB1/F_USB2 (USB 2.0/1.1 Headers)  Theheadersconform toUSB 2.0/1.1 specication.Each USBheader canprovide twoUSB portsvia an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer .
Seite 29

- 29 - Hardware Installation 13) COM (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer .
Seite 30

- 30 - Hardware Installation 20 19 2 1 F_USB30 F_U B_  F_   F_      _ �.
Seite 31

- 31 - BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard.
Seite 32

BIOS Setup - 32 - 2-1 Startup Screen The following startup Logo screen will appear when the computer boots. FunctionKeys: <DEL>:BIOSSETUPQ-FLASH  Pressthe<Delete>keytoenterBIOSSetuportoaccesstheQ-FlashutilityinBIOSSetup.
Seite 33

- 33 - BIOS Setup 2-2 The Main Menu Onthemain menuoftheBIOS Setupprogram,pressarrow keystomoveamong theitemsandpress<Enter> to accept or enter a sub-menu. Or you can use your mouse to select the item you want.
Seite 34

BIOS Setup - 34 - BIOS Setup Menus  M.I.T .  Use thismenu tocongure theclock, frequency , andvoltagesof yourCPU and memory ,etc. Orcheck the system/CPU temperatures, voltages, and fan speeds.
Seite 35

- 35 - BIOS Setup 2-3 M.I.T . Whetherthesystemwill workstablywiththeoverclock/overvoltage settingsyoumadeis dependent onyouroverallsystem congurations.
Seite 36

BIOS Setup - 36 - ` M.I.T . Current Status This screen provides information on CPU/memory frequencies/parameters. ` Advanced Frequency Settings & CPU Clock Control  AllowsyoutomanuallysettheCPUbaseclockin1MHzincrements.
Seite 37

- 37 - BIOS Setup (Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature. & CPU Clock Ratio, CPU Frequency The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu.
Seite 38

BIOS Setup - 38 - & CPU Core Control Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS toenable allCPUcores (numberof coresavailabledepends ontheCPU beingused).
Seite 39

- 39 - BIOS Setup ` Advanced Memory Settings & ExtremeMemoryProle(X.M.P .) (Note) , System Memory Multiplier , Memory Frequency(MHz) The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu.
Seite 40

BIOS Setup - 40 - This sub-menu provides memory timing settings for each channel of memory . This sub-menu provides memory timingsettingsforeachchannel ofmemory .Therespectivetiming settingscreensarecongurableonlywhen Memory Timing Mode is set to Manual or Advanced Manual .
Seite 41

- 41 - BIOS Setup ` PC Health Status & Reset Case Open Status  Disabled Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default)  Enabled Clears the record of previous chassis intrusion status and the Case Open  eldwill show "No"atnextboot.
Seite 42

BIOS Setup - 42 - & CPU Vcore/DRAM V oltage/+3.3V/+5V/+12V Displays the current system voltages. & CPU/System T emperature Displays current CPU/system temperature. & CPU/System Fan Speed Displays current CPU/system fan speeds. & CPU T emperature Warning  Sets thewarning thresholdfor CPUtemperature.
Seite 43

- 43 - BIOS Setup 2-4 System Information This section provides information on your motherboard model and BIOS version. Y ou can also select the default language used by the BIOS and manually set the system time. & System Language Selects the default language used by the BIOS.
Seite 44

BIOS Setup - 44 - 2-5 BIOS Features & Boot Option Priorities  Speciesthe overall boot order from the available devices. For example, you can set hard drive as the rstpriority( Boot Option #1 )andDVDROMdriveasthesecond priority( Boot Option #2 ).
Seite 45

- 45 - BIOS Setup & Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities  Speciesthebootorder foraspecicdevice type,suchas harddrives,optical drives,oppydiskdrives, and devices that support Boot from LAN function, etc.
Seite 46

BIOS Setup - 46 - & CSM Support  EnablesordisablesUEFICSM(CompatibilitySupportModule)tosupportalegacyPCbootprocess.  Always   EnablesUEFICSM.(Default)  Never    DisablesUEFICSMandsupportsUEFIBIOSbootprocessonly .
Seite 47

- 47 - BIOS Setup & User Password  Allowsyoutocongure auserpassword.Press<Enter>onthis item,typethepassword,andthenpress <Enter>. Y ou will be requested to conrm the password.
Seite 48

BIOS Setup - 48 - 2-6 Peripherals & IOMMU  Enablesordisables AMDIOMMUsupport.(Default:Disabled) & OnChip USB Controller  EnablesordisablestheintegratedUSBcontroller .(Default:Enabled) & HD Audio Azalia Device  Enablesordisablestheonboardaudiofunction.
Seite 49

- 49 - BIOS Setup & Onboard LAN Controller  EnablesordisablestheonboardLANfunction.(Default:Enabled)  If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled .
Seite 50

BIOS Setup - 50 - ` SA T A Conguration & OnChip SA T A Channel  EnablesordisablestheintegratedSA T A controllers.(Default:Enabled) & OnChip SA T A T ype  En.
Seite 51

- 51 - BIOS Setup & Parallel Port  Enablesordisablestheonboardparallelport(LPT).(Default:Enabled) & Device Mode   This itemis congurable onlywhen Parallel Port is set to Enabled . It allows you to select an operating modefortheonboardparallel (LPT)port.
Seite 52

BIOS Setup - 52 - 2-7 Power Management (Note) SupportedonWindows8/7operatingsystemonly . & Resume by Alarm  Determineswhethertopoweronthesystematadesiredtime.
Seite 53

- 53 - BIOS Setup & Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event.  Note:T ousethisfunction,youneedan A TXpowersupplyprovidingatleast1A onthe+5VSBlead.
Seite 54

BIOS Setup - 54 - 2-8 Save & Exit & Save & Exit Setup  Press <Enter>on thisitem andselect Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No orpress<Esc>toreturntotheBIOSSetupMainMenu.
Seite 55

- 55 - Conguring SA T A Hard Drive(s) Chapter3 ConguringSA T A HardDrive(s) (Note1) SkipthisstepifyoudonotwanttocreateRAIDarrayontheSA T Acontroller . (Note2) RequiredwhentheSA T Acontrollerissetto AHCIorRAIDmode.
Seite 56

ConguringSA T AHardDrive(s) - 56 - Step 2: Ifyou wantto congureUEFI RAID,follow thestepsin "C-1." T oenter thelegacyRAID ROM,save thesettings and exit BIOS Setup. Refer to "C-2" for more information.
Seite 57

- 57 - Conguring SA T A Hard Drive(s) C-1.UEFIRAIDConguration ThismodesupportsWindows864-bitinstallationonly . T o congure UEFI RAID, you need .
Seite 58

ConguringSA T AHardDrive(s) - 58 - Figure 5 Creating a RAID Array T o create a RAID array , refer to the following examples to enter the commands and press <Enter>. When succeeded, the message which says "created sucessfully" will appear .
Seite 59

- 59 - Conguring SA T A Hard Drive(s) T oexittheUEFIRAIDutility ,enter"exit"andpress<Enter>. Deleting an Array T odeleteanarray ,enterthefollowingcommandsandpress<Enter>.
Seite 60

ConguringSA T AHardDrive(s) - 60 - C-2.ConguringLegacyRAIDROM Enter the legacy RAIDBIOS setup utility to congure a RAID array .Skip this step and proceed with the installation  ofWindowsoperatingsystemforanon-RAIDconguration.
Seite 61

- 61 - Conguring SA T A Hard Drive(s) First, select a RAIDmode and press<Enter>. The selections available dependon the numberof thehard drives being installed. Then follow the on-screen instructions to specifythe array size.
Seite 62

ConguringSA T AHardDrive(s) - 62 - Figure 12 AMD-RAID Array Conguration (Build: 6.1.1-00075) Arrays Create Array < h >< i >< f >< g >=Choose, <Esc>=Back &l.
Seite 63

- 63 - Conguring SA T A Hard Drive(s) Deleting an Array The Delete Array(s) menu option allows for deletion of disk array assignments. 1. Select Delete Array(s) in the Main Menu andpress<Enter>.
Seite 64

ConguringSA T AHardDrive(s) - 64 - 3-2 Installing the SA T A RAID/AHCI Driver and Operating System WiththecorrectBIOSsettings,youarereadytoinstalltheoperatingsystem. A. Installing Windows 8/7 (ThefollowinginstructionsuseWindows8astheexampleoperatingsystem.
Seite 65

- 65 - Conguring SA T A Hard Drive(s) Figure 2 B. Installing Windows XP (32-bit) Before installing WindowsXP , connect aUSB oppy disk drive to yourcomputer.
Seite 66

ConguringSA T AHardDrive(s) - 66 - Figure 3 RefertothefollowingforinstallingthedriverduringtheWindowssetupprocess.
Seite 67

- 67 - Conguring SA T A Hard Drive(s) RebuildinganArray: Rebuilding is the process of restoring data to a hard drive from other drives in the array . Rebuilding applies only to fault-tolerant arrays such as RAID 1 and RAID 10 arrays. T o replace the old drive, make sure to use a new drive of equal or greater capacity .
Seite 68

ConguringSA T AHardDrive(s) - 68 -.
Seite 69

- 69 - Drivers Installation 4-1 Installing Chipset Drivers Chapter 4 Drivers Installation • Before installing the drivers, rst install the operating system. (The following instructions use Windows8astheexampleoperatingsystem.
Seite 70

Drivers Installation - 70 - 4-2 Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software. Y ou can click the Install button on the right of an item to install it. 4-3 T echnical Manuals This page provides the content descriptions for this driver disk.
Seite 71

- 71 - Drivers Installation 4-4 Contact For thedetailed contact informationof the GIGABYTET aiwan headquarter orworldwide branch ofces,click the URL on this page to link to the GIGABYTE website. 4-5 System This page provides the basic system information.
Seite 72

Drivers Installation - 72 - 4-6 Download Center T o update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE website.
Seite 73

- 73 - Unique Features 5-1 BIOS Update Utilities GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash ™ and @BIOS ™ . GIGABYTE Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mode.
Seite 74

Unique Features - 74 - B. Updating the BIOS In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the BIOS,choose the locationwhere theBIOS leis saved.
Seite 75

- 75 - Unique Features Step 4: DuringthePOST , press<Delete>toenterBIOSSetup. Select Load Optimized Defaults on the Save & Exit screen and press <Enter> to load BIOSdefaults.
Seite 76

Unique Features - 76 - 5-1-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin 1. In Windows,closeallapplicationsandTSR(T erminateand StayResident)programs.Thishelpsprevent unexpected failures when performing a BIOS update.
Seite 77

- 77 - Unique Features 5-2 EasyT une 6 GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to ne-tune their system settings or do overclock/overvoltage in Windows environment.
Seite 78

Unique Features - 78 - 5-3 Smart Recovery 2 SmartRecovery2 allowsyoutoback upapartitionasan imageleeveryhour.Y oucanusethese imagesto restoreyoursystemorleswhenneeded.
Seite 79

- 79 - Unique Features Recovering your system with Smart Recovery 2 (Windows 8/7 only): Steps: 1. Click the File Recovery button on the main menu. 2. Select the location where your backup is saved. 3. Use the time slider to select a time point.
Seite 80

Unique Features - 80 -.
Seite 81

Appendix - 81 - 6-1 Conguring AudioInputandOutput Chapter 6 Appendix HighDenitionAudio(HD Audio) HD Audioincludesmultiple highqualitydigital-to-analogconverters (DACs).
Seite 82

Appendix - 82 - The pictures to the right show the 7.1-channel speaker congurations. 7.1-Channel Speakers: Center/Subwoofer Speaker Out Front Speaker Out Rear Speaker Out Side Speaker Out Step 2: Connect an audio device to an audio jack. The The current connected device is dialog box appears.
Seite 83

Appendix - 83 - If your chassis provides an AC'97 front panel audio module, to activate the AC'97 functionality , click the tool icon on the Speaker Conguration tab. On the Connector Settings dialog box, select the Disable front panel jack detection check box.
Seite 84

Appendix - 84 - 6-1-2 ConguringS/PDIFOut The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality .
Seite 85

Appendix - 85 - 6-1-3 ConguringMicrophoneRecording Step 2: Connectyour microphoneto theMic injack (pink)on the back panel or the Mic in jack (pink) on the front panel. Thencongurethejackformicrophonefunctionality .
Seite 86

Appendix - 86 - Step 5: T o open the Sounder Recorder , move the mouse cursor to the bottom left corner of the screen, click the Start icon to switch to the Start screen (orpressthe Windows button on the keyboard).
Seite 87

Appendix - 87 - 6-1-4 Using the Sound Recorder A. Recording Sound 1. Makesureyouhaveconnectedthesoundinputdevice(e.g.microphone)tothecomputer . 2. T o record the audio, click the Start Recording button . 3. T o stop recording audio, click the Stop Recording button .
Seite 88

Appendix - 88 - 6-2 T roubleshooting 6-2-1 Frequently AskedQuestions T o read more F AQs for your motherboard, please go to the Support& DownloadsF AQ page on GIGABYTE's website.
Seite 89

Appendix - 89 - 6-2-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. ST ART A Turn of f the power. Remove all peripherals, connecting cables, and power cord etc.
Seite 90

Appendix - 90 - If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the Support & DownloadsT echnical Support page to submit your question. Our customer service staff will reply you as soon as possible.
Seite 91

Appendix - 91 - Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a thirdparty norbe usedfor anyunauthorized purpose.
Seite 92

Appendix - 92 - FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Seite 93

Appendix - 93 -.
Seite 94

Appendix - 94 -.
Seite 95

Appendix - 95 - Contact Us • GIGA-BYTE TECHNOLOGY CO., L TD. Address:No.6,BaoChiangRoad,Hsin-TienDist., NewT aipeiCity231,T aiwan TEL: +886-2-8912-4000 F AX:+886-2-8912-4005 T ech.andNon-T ech.Support(Sales/Marketing): http://ggts.
Seite 96

Appendix - 96 - • GIGABYTE Global Service System T osubmit a technicalor non-technical(Sales/Marketing) question, please link to: http://ggts.gigabyte.com.tw Then select your language to enter the system. • G.B.T . TECHNOLOGY TRADING GMBH - Germany WEBaddress:http://www .

Lesen Sie die Bedienungsanleitung Gigabyte GA-F2A78M-D3H (rev. 3.0) - vermeiden Sie Probleme

Ein wichtiger Punkt beim Kauf des Geräts Gigabyte GA-F2A78M-D3H (rev. 3.0) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:

um zu wissen, wie man das Gerät richtig nutzt
um zu wissen, wie man es wartet/ eine jährliche technische Überprüfung des Produkts Gigabyte GA-F2A78M-D3H (rev. 3.0) durchführt
um zu wissen, wie man im Fall einer Störung mit Gigabyte GA-F2A78M-D3H (rev. 3.0) umgehen soll

Wenn Sie Gigabyte GA-F2A78M-D3H (rev. 3.0) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Gigabyte GA-F2A78M-D3H (rev. 3.0) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Gigabyte GA-F2A78M-D3H (rev. 3.0) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Gigabyte GA-F2A78M-D3H (rev. 3.0) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.

Wenn Sie aber schon Gigabyte GA-F2A78M-D3H (rev. 3.0) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Gigabyte GA-F2A78M-D3H (rev. 3.0) verkürzen könnten.

Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Gigabyte GA-F2A78M-D3H (rev. 3.0). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Gigabyte GA-F2A78M-D3H (rev. 3.0) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.

Gigabyte GA-F2A78M-D3H (rev. 3.0) Bedienungsanleitung

URL teilen

Ähnliche Anleitungen

URL teilen

Ähnliche Anleitungen

Zusammenfassung des Inhalts auf den nächsten Seiten der Bedienungsanleitung

Seite 1

Seite 2

Seite 3

Seite 4

Seite 5

Seite 6

Seite 7

Seite 8

Seite 9

Seite 10

Seite 11

Seite 12

Seite 13

Seite 14

Seite 15

Seite 16

Seite 17

Seite 18

Seite 19

Seite 20

Seite 21

Seite 22

Seite 23

Seite 24

Seite 25

Seite 26

Seite 27

Seite 28

Seite 29

Seite 30

Seite 31

Seite 32

Seite 33

Seite 34

Seite 35

Seite 36

Seite 37

Seite 38

Seite 39

Seite 40

Seite 41

Seite 42

Seite 43

Seite 44

Seite 45

Seite 46

Seite 47

Seite 48

Seite 49

Seite 50

Seite 51

Seite 52

Seite 53

Seite 54

Seite 55

Seite 56

Seite 57

Seite 58

Seite 59

Seite 60

Seite 61

Seite 62

Seite 63

Seite 64

Seite 65

Seite 66

Seite 67

Seite 68

Seite 69

Seite 70

Seite 71

Seite 72

Seite 73

Seite 74