Benutzeranleitung / Produktwartung GA-B85M-D2V des Produzenten Gigabyte
Zur Seite of 60
GA-B85M-D2V User's Manual Rev . 1 1 01 1 2ME-B85MD2V - 1 1 01 R.
Motherboard GA-B85M-D2V Sept. 6, 2013 Sept. 6, 2013 Motherboard GA-B85M-D2V Copyright © 2013 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
- 3 - T able of Contents GA - B85 M - D2V Moth erboar d Layout............................................................................... 4 GA - B85 M - D2V Moth erboar d Bloc k Diagram .............................................................
- 4 - GA- B85 M - D2V Mothe rboa rd Layout The box contents above are for reference only and the actual items shall depend on the product package you obtain.
- 5 - GA- B85M - D2V Motherboard Block Diagram PS/2 KB/Mouse LGA1 150 CPU DMI 2.0 FDI CPU CLK+/- (100 MHz) Dual BIOS DDR3 1600/1333 MHz Dual Channel Memory COM LPC Bus Intel ® B85 iTE ® Super I/O PCIe CLK (100 MHz) PCI Express Bus 1 PCI Express x16 x1 LAN RJ45 Realtek ® GbE LAN PCI Express Bus x16 D-Sub 4 SA T A 6Gb/s DVI-D 8 USB 2.
- 6 - Chapter 1 Hardware Installation 1- 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD).
- 7 - 1- 2 P roductSpe cications CPU Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel ® Core ™ i3 processors/Intel ® Pentium ® processors/ Intel ® Celeron ® processors in the LGA1 150 package (Go to GIGABYTE's website for the latest CPU support list.
- 8 - Internal Connectors 1 x USB 3.0/2.0 header 2 x USB 2.0/1.1 headers 1 x serial port header 1 x Clear CMOS jumper Back Panel Connectors 1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x D-Sub port 1 x DVI-D port 2 x USB 3.
- 9 - 1-3 Installing the CPU Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) • Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage.
- 10 - 1-5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card.
- 1 1 - • When removing the cable connected to a back panel connector, rst remove the cable from your device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector . Do not rock it side to side to prevent an electrical short inside the cable connector .
- 12 - 1/2) A TX_12V_2X4/A TX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, rst make sure the power supply is turned off and all devices are properly installed.
- 13 - 5) SA T A3 0/1/2/3 (SA T A 6Gb/s Connectors) The SA T A connectors conform to SA T A 6Gb/s standard and are compatible with SA T A 3Gb/s and SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device. Pin No. Denition Pin No.
- 14 - 7) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, speaker , and system status indicator on the chassis to this header according to the pin assignments below . Note the positive and negative pins before connecting the cables.
- 15 - 9) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS conguration and reset the CMOS values to factory defaults. T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
- 16 - 13) BA T (Battery) The battery provides power to keep the values (such as BIOS congurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost.
- 17 - Chapter 2 BIOS Setup • Because BIOS ashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not ash the BIOS. T o ash the BIOS, do it with caution. Inadequate BIOS ashing may result in system malfunction.
- 18 - 2- 2 M.I. T . Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components.
- 19 - (Not e) This ite m is pr esen t only w hen yo u inst all a C PU th at supp or t s thi s feat ure. For m ore i nfor ma tio n abo ut Intel ® CPUs' u niq ue feat ure s, ple ase v isit I ntel 's web site.
- 20 - (Note) This item is present only when you install a CPU and a memory module that support this feature. (Not e) Thi s item i s pre sent o nly w hen yo u inst all a C PU that s upp or t s this f eatu re. For m ore in for mat ion about Int el ® CPUs' u niq ue feat ure s, ple ase v isit I ntel 's web site.
- 21 - ` PC Health Status & Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enabled Clears the record of previous chassis intrusion status and the Case Open eld will show "No" at next boot.
- 22 - & Fan Speed Percentage Allows you to control the system fan speed. This item is congurable only when System Fan Speed Control is set to Manual .
- 23 - 2- 4 BIOS Features & Boot Option Priorities Species the overall boot order from the available devices. For example, you can set hard drive as the rst priority ( Boot Option #1 ) and DVD ROM drive as the second priority ( Boot Option #2 ).
- 24 - & Fast Boot Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup speed. (Default: Disabled) & VGA Support Allows you to select which type of operating system to boot. Auto Enables legacy option ROM only .
- 25 - & Windows 8 Features Allows you to select the operating system to be installed. (Default: Other OS) & CSM Support Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process. Always Enables UEFI CSM.
- 26 - & Initial Display Output Species the rst initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. IGFX Sets the onboard graphics as the rst display . PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the rst display .
- 27 - E nab led All shared ports are eventually routed to the xHCI controller during the BIOS boot process. If BIOS does not have pre-boot support for the xHCI controller , it should initially route the sharable ports to the EHCI controller and then prior to OS boot it should route the ports to xHCI controller .
- 28 - (AHCI) is an interface specication that allows the storage driver to enable advanced Serial A T A features such as Native Command Queuing and hot plug. (Default) ` Serial A T A Port 0/1/2/3/4/5 & Port 0/1/2/3/4/5 Enables or disables each SA T A port.
- 29 - & Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: T urn on the system at a specic time on each day or on a specic day in a month.
- 30 - & Save & Exit Setup Press <Enter> on this item and select Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Exit Without Saving Press <Enter> on this item and select Ye s .
- 31 - Chapter 3 Appendix Drivers Installation • Before installing the drivers, rst install the operating system. (The following instructions use Windows 8 as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive.
- 32 - Regulator y Statement s Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
- 33 -.
- 34 -.
- 35 -.
- 36 - Conta ct Us GIGA-BYTE TECHNOLOGY CO., L TD. Add res s: N o.6, B ao Ch ian g Roa d, Hs in -Tien D ist ., New Taipe i Cit y 231, Taiwan TEL: + 88 6 -2- 8 912-4 0 0 0, FAX : +8 86 -2- 8 912- 40 0 5 T ec h. an d No n-T ec h. S upp or t (Sa le s/ Ma rket in g) : htt p://gg ts.
.
English more information and for the voice mail number , contact your service provider . 1. Press Menu Settings Calls V oice mail . 2. Select Empty Add . 3. Select Phonebook to add a contact from the Phonebook. Alternatively , select Manual . See Phonebook, p.
English T op 10 Set an entry as one of the rst 10 contacts listed in the phonebook. 1. Press Menu Settings Calls T op 10 . 2. Select one of the empty entries and press Add . 3. Use / to scroll through the phonebook, or quick search by pressing the key corresponding to the rst letter of the entry .
.
English 1. Press Menu Settings Calls Call setup . 2. Select Call divert : • V oice calls to divert all voice calls. • Unreachable to divert incoming calls if the phone is turned off or out of range. • No reply to divert incoming calls if unanswered.
.
English 2. Select SMS centre Edit . 3. Enter the service centre number . Press Clear to delete. 4. Press OK to conrm. Cell broadcast Y ou can receive messages on various topics from your service provider , such as weather or trafc conditions in a particular region.
English Note! Make sure to insert a compatible memory card before saving on it (see Install the SIM card, memory card and the battery , p. 1 ). 1. Press Menu Settings Messages MMS settings . 2. Select Storage : • Phone to store in the phone memory .
.
English Delivery report Y ou can select if you want the phone to notify you when your text message or picture message has reached the receiver . 1. Press Menu Settings Messages . 2. Select Delivery report On / Off to enable/disable. 3. Press OK to conrm.
.
English • Off the phone dials without sending a text message rst. 3. Press OK to conrm. Message 1. Press Menu Settings Assistance SMS . 2. Select Message Edit to write the message. 3. Press OK to conrm. Note! Y ou must write a message if you activate the SMS function.
.
.
English • Account name to enter the account name. • APN to enter the APN address. • User name to enter user name. • Password to enter password • Connection type select HTTP / W AP . • Proxy address to enter proxy address. • Proxy port to enter proxy port.
English • On to activate PIN code, you need to enter the PIN code every time the phone is started. • Off to deactivate PIN code. W arning, if SIM card is lost/stolen it is unprotected. • Automatic to not enter the PIN code when the phone is started, the phone remembers it automatically .
English 2. Select Number list Empty Add . 3. Select Phonebook to add a contact from it. Alternatively , press Manual . 4. Press . 5. Enter the number and press OK to conrm. 6. Repeat until you have 5 contacts (maximum). T o edit or delete an existing entry , select it and press Options View / Edit / Delete .
English 2. Select Reset settings to reset the phone settings. All the changes that you have made to the phone settings will be reset to default settings. 3. Enter the phone password and press OK to reset. Reset all 1. Press Menu Settings Security . 2.
English • Copy / Move Phone / Memory card Options Open . Select a folder , eg Photos and press Options Paste . 5. Press OK to conrm. Supported formats: • Picture format: BMP/GIF/JPG/PNG. Photos taken with the built in camera are saved as JPG. • Audio format: W A V/AMR/MIDI/MP3/AAC/AAC+.
English Calendar View 1. Press Menu Organizer Calendar . 2. Press Options View to show tasks for the selected date. 3. Press OK to conrm. Add task 1. Press Menu Organizer Calendar Add task . 2. Enter date for the task, then press . 3. Enter time for the task, then press .
English Note! The reminder will work even when the phone is switched off. Do not press Y es to power on if wireless phone use is prohibited or when it may cause interference or danger . When the alarm goes off a signal will sound. Press Stop to turn off the alarm or press Snooze to repeat the alarm after 9 minutes.
English More The More menu contains: FM radio Games Calculator T orch FM radio The FM radio has a frequency range from 87.5 to 108.0 MHz and 9 preset channels. T urning the radio on 1. Connect the headset to the headset socket . 2. Press Menu More FM radio .
English 2. Press Options Loudspeaker On . 3. Use the side buttons + / – to adjust the sound volume. 4. T o turn off, select Off . Channel list (editing the channel list) 1. Press Menu More FM radio Options Channel list . 2. Select the channel you wish to edit and press Options : • Play to play the selected channel.
English 5. Repeat steps 2–4 as necessary . Select = and press OK to calculate the result. T orch 1. Press Menu More T orch . 2. Press Off to turn off. Note! See T orch, p.25 to set the automatic switch off time. Games 1. Press Menu More Games . 2. Select T etris / Boxman : • Continue to continue game.
Ein wichtiger Punkt beim Kauf des Geräts Gigabyte GA-B85M-D2V (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Gigabyte GA-B85M-D2V noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Gigabyte GA-B85M-D2V - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Gigabyte GA-B85M-D2V reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Gigabyte GA-B85M-D2V erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Gigabyte GA-B85M-D2V besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Gigabyte GA-B85M-D2V verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Gigabyte GA-B85M-D2V. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Gigabyte GA-B85M-D2V gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
