Benutzeranleitung / Produktwartung EXT-3GSDI-2-HDMI1.3S des Produzenten Gefen
Zur Seite of 37
® 3GSDI to HDMI ® 1.3 Scaler EXT-3GSDI-2-HDMI1.3S User Manual www.gefen.com.
ASKING FOR ASSIST ANCE Rev B5 T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday , Paci fi c T ime Write T o: Gefen, LLC. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .
1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting And Operating The 3G-SDI T o HDMI Scaler 6 Setting up the Scaler for the First T ime 7 RMT -8HDS-IR Remote Description 8 IR Remote Installation 9 RMT -8HDS-IR Remote Con fi guration 1 0 Controlling the 3GSDI to HDMI 1.
INTRODUCTION Congratulations on your purchase of the 3GSDI to HDMI 1.3 Scaler . Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
OPERA TION NOTES • The built-in GUI (Graphical User Interface) or On-Screen Display (OSD) provides convenient operation of the Scaler . The supplied IR Remote control operates the OSD. Page 10 and following cover OSD functions. • The IR Remote’s operating channel must be identical to that of the Scaler .
Features • View 3G-SDI video directly from a 3G-SDI network scaled onto any HDMI- compliant display at any resolution you choose. • 225 MHz Video Bandwidth (max.
P ANEL LA YOUT Back 4 67 8 9 1 0 5 11 1 2 Front 3 2 1 4.
1 IR Window (Sensor) Electronic sensor which receives IR commands from the IR Remote Control. 2 P ower LED Indicator (Red) Becomes active when power is supplied to the Scaler via the included 5V power adapter . Also indicates when there is an error with the Scaler .
CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER Setting up the Scaler for the First Time 1. Connect the SD/HD/3G-SDI source(s) to the SDI input(s) on the Scaler . If using a dual-link SDI source, ensure that both SDI inputs 1 and 2 are connected.
Operation of the Scaler is done by IR Remote Control (Gefen part no. EXT -RMT -8HDS-IR, provided with the 3GSDI to HDMI 1.3 Scaler). The remote control has directional buttons to navigate within the On-Screen Display (OSD) menu system that drives the Scaler .
8 1. Remove battery cover from the back of the included RMT -SHDS-IR remote. 2. V erify that DIP switches 1 and 2 are in the down (OFF) position. (See page 9 for DIP Switch IR Channel Settings.) 3. Insert the battery , holding the battery so that you can see the positive side facing up.
9 RMT -8HDS-IR REMOTE CONFIGURA TION How to Resolve IR Code Con fl icts In the event that IR commands from other remote controls con fl ict with the supplied RMT -8HDS-IR remote control, changing the remote channel will alleviate this issue. The RMT -8HDS-IR remote control has DIP SWITCHES for con fi guring the remote channel.
CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER Controlling the 3GSDI to HDMI 1.3 Scaler The 3GSDI to HDMI 1.3 Scaler has a built in GUI (Graphical User Interface) for navigating the various functions, otherwise known as the On-Screen Display or OSD.
Supported Video and Graphics Formats The following table contains all supported video and graphic formats for the Gefen 3GSDI to HDMI 1.3 Scaler . The Scaler can receive any of the input formats and can convert these to any of the output formats listed.
CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER Format Mode Signal T ype 1920x1080 24 PsF Video Input 1920x1080 23.98 P Video Input & Output 1920x1080 23.98 PsF Video Input 2048x1080 24 P Video Input & Output 2048x1080 24 PsF Video Input 2048x1080 23.
CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER Contains options such as OSD Language (English or French) and Scaler con fi guration: General Options Utilizing the On-Screen Display (OSD) Menu T o access the 3GSDI to HDMI 1.3 Scaler OSD menu, it must be connected to an HDMI- compliant video display device using an HDMI cable.
CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER Patterns The 3GSDI to HDMI 1.3 Scaler has 2 built-in test patterns: Color Bars and Cross Hatch, useful for testing the device and calibrating the settings. Figure 4 - Patterns Color Bars & Cross Hatch T est Patterns Activates the two test patterns (see menu above).
CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER Output Formats Menu Figure 7 - Output The video signal created on the HDMI output port can be con fi gured from the Output menu. The user can select Video (TV), Graphic (computer) or custom output format.
CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER This section of the menu contains all video formats that can be output by the scaler on the HDMI output. If the Monitor Supported option is selected (see Available Formats), some formats will be disabled.
17 This function allows creation of a custom output. 720p is the default. Check the speci fi cations of your output device to ensure compatibility when creating a custom output format. Custom Output Format CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.
18 Deep Color CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER Input Formats Menu The handling of video input signals can be con fi gured from the input menu, shown below in Figure 15. The Gefen 3GSDI to HDMI 1.3 Scaler supports Deep Color at 10 bits in the 4:4:4 con fi gurations.
CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER 19 SDI Input Format When the Scaler sees a valid SD/HD/3G-SDI source as input, the format is displayed at the bottom of the OSD and checked in the menu choices. “Auto detect” appears if no valid input is found.
20 Clean Aperture CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER The clean aperture size and position can be con fi gured. Y ou can set the percentage (as a function of the production aperture) of the signal that is active.
21 SDI Audio Channel CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER IR Remote Channel The Scaler ’s IR remote control transmits IR codes on a single infrared channel. A total of four (4) channels are available for use by the Scaler and its IR Remote.
22 Picture Adjustment/Enhancement Functions Color Brightness & Contrast Adjustments CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER The Scaler ’s operating functions can be adjusted to produce the best output picture possible with the connected equipment.
23 T wo prede fi ned tables are available: Default and sRGB. The user can also de fi ne a custom User T able by using commands sent over the USB port via the downloaded software from Gefen (see Appendix B, p. 27). When the Custom User T able is selected, the gamma coef fi cient is used to calculate a new Gamma Look up table.
24 Noise Reduction Control CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER Motion Threshold Control The motion threshold can be set from 0 to 15. The default value is 4.0. The level of digital noise reduction can be con fi gured as a percentage from 0 to 100.
25 The RGB output color range may be changed/set from limited (16-235) to full (0-255). The output link con fi guration must be set to RGB 4:4:4 otherwise this menu is disabled.
26 CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER Several Aspect Ratio Modes are available. In Full Screen Mode, the Scaler transforms the input signal to the selected resolution on the output device.
27 CONNECTING AND OPERA TING THE 3GSDI T O HDMI 1.3 SCALER The Extract command takes a subset (cropping) of the SD/HD/3G-SDI source picture and replicates that portion only to the HDMI output device. The extraction size (crop size) can be selected in the OSD menu.
28 TROUBLESHOOTING The power LED is continuously blinking. • First, disconnect all input and output A/V devices from the Scaler , then reset it by removing the power for several seconds. If the problem persists, try performing a software upgrade (see Appendix A, page 27).
TROUBLESHOOTING Deep color is not working. • Does the display device on the HDMI output support HDMI 1.3 and Deep Color? • Make sure the output link con fi guration is not set to YCbCr 4:2:2, since YCbCr 4:2:2 does not support Deep Color . In the OSD, set the link con fi guration in the output menu to RGB 4:4:4.
30 APPENDIX A: SOFTW ARE UPDA TES Installing Software Updates from Gefen Periodic software updates will fi x known technical issues and enhance capabilities. Updates are done with a PC running Microsoft Windows XP® or Windows Vista® and either one of an available Serial port or USB port, depending on what is most convenient.
31 APPENDIX B: GAMMA USER T ABLE UPDA TES The format of the LUT table de fi nition fi le is standard CSV (Comma Separated V alues). Each line contains Red, Green and Blue values separate by a comma (”,”) between 0 and 1023. A CSV fi le must contain exactly 1024 lines: 1023,0,0 (Line 1) 1023,0,0 1023,0,0 1023,0,0 1023,0,0 … .
SPECIFICA TIONS Max. image output resolution ......................................................... 2048x1080p24 Input A/V Bandwidth ........................................ Up to 2 x 2.97 Gbps (T wo 3G-SDI) Output A/V Bandwidth ...................
W ARRANTY 33 Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is noti fi ed within two (2) years .
Rev B5 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com Pb This product uses UL listed power supplies.
Ein wichtiger Punkt beim Kauf des Geräts Gefen EXT-3GSDI-2-HDMI1.3S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Gefen EXT-3GSDI-2-HDMI1.3S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Gefen EXT-3GSDI-2-HDMI1.3S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Gefen EXT-3GSDI-2-HDMI1.3S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Gefen EXT-3GSDI-2-HDMI1.3S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Gefen EXT-3GSDI-2-HDMI1.3S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Gefen EXT-3GSDI-2-HDMI1.3S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Gefen EXT-3GSDI-2-HDMI1.3S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Gefen EXT-3GSDI-2-HDMI1.3S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
