Benutzeranleitung / Produktwartung E-9425R des Produzenten Gateway
Zur Seite of 116
® E-9425R Ser ver USER GUIDE.
.
Cont ents i Chapter 1: Checking Out Yo ur Gateway Server . . . . . . . . . . . . . . . . . . . . . . . 1 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Control panel .
Contents ii Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Prev ent ing static electr icit y discharg e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iii www.gateway.com Beep c odes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 LED inf ormation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents iv.
CHAP TER 1 1 Checking Out Y our Gat e w a y Serv er • Fro n t • Bac k • Int eri or • Sys te m b o a r d • Hot -s w ap ba c kpl ane s • Get ting Help.
CHAPTER 1 : Checking Out Y our Gateway Server 2 Fro n t C ont r ol pa nel Bac k # Feat ure # Feature 1 2 USB ports 6 NIC st atus LED 2 Powe r b ut ton 7 Sys te m fa ul t L ED 3 ID butt on 8 Rese t bu .
www.gateway.com 3 Int erior # Fea t ur e # Fe at u re 1 Sys te m b o ar d 7 Slimline D VD/CD-R W combo d ri ve or DVD - RW d r ive 2 Syste m fan s 8 SA S/ SA T A ba ck pl an e 3 Fan bo a rd 9 ROMB bat.
CHAPTER 1 : Checking Out Y our Gateway Server 4 S y st em boar d C onn ec t ors # Fea t ur e # Fe at u re 1 Rear dua l USB Port ( J3 5) 20 DIMM7 sock et (J2 4) 2 Seria l port (J3 1 ) 2 1 DIMM8 s oc k .
www.gateway.com 5 5 PS/2 mou se port (J1 5) 24 Proces sor 2 (CP U2) sock et 6 PS/2 k ey board port (J6) 2 5 Pr oces s or po w er connec t or (J2 8) 7 Serve r manage ment por t (J5 9) 26 SMIL conne ct .
CHAPTER 1 : Checking Out Y our Gateway Server 6 Hot -s w ap bac kplane s SA S/ SA T A b a c k p l a n e # Fea t ur e # Feat ure 1 IDE connector 7 SAS/SA T A hard drive c onnector 3 2 C ontro l panel U.
www.gateway.com 7 LED inf or mation See the f ollow ing table f or a des cri ption of this server’s LEDs and the inf ormation the y p r o v ide: LED Name Functio n Location Color De scri pti on ID A.
CHAPTER 1 : Checking Out Y our Gateway Server 8 Ge t ting Help In addition to y our operating s y st em’ s documentation, y ou c an use the f ol low ing inf ormati on r es ourc e s t o hel p y ou us e y o ur se rv er .
CHAP TER 2 9 Set ting Up Y our Serv er • Set ting up the har dwar e • Prot ec ting fr om pow er s our ce pr oblems • Mounting y our ser v er into a cabine t • Starting y our server • Set tin.
CHAPT ER 2: Setting Up Your Server 10 Se t ting up the har dw are T o m a k e s ur e t h a t y o u r w o r k i ng e n v i r o n m e nt i s s a f e : • Us e a c lean, dry , f lat, stable s urf ace f or your s erver . Allo w at l east 6 i nche s at the back of the serv er f or cabling and air circ ulation.
www.gateway.com 11 Some surge pr ot ect ors and uninter ruptible po wer s upplies include s imple line- conditioning capabil ities . Unint err uptible po wer supplies Us e an uninterr uptible power supply (UPS) t o pr otec t y our server f r om data los s during a total pow er fai lure .
CHAPT ER 2: Setting Up Your Server 12 3 Align the slots in the back server r ails wit h the studs on t he side of the serv er , then engage the slots w it h the studs and slide the rail f or w ar d until it st op s.
www.gateway.com 13 6 Attac h one mounting nut t o eac h of the two back cabinet po sts wher e you plan t o install the server . 7 Hold t he serv er in plac e in the cabine t and s wing t he hing ed ba.
CHAPT ER 2: Setting Up Your Server 14 8 Align the mounting scr ew hole s in the serv er handles with the f ront mounting nuts, then secure the f ront in pl ace with two mou nting s crew s (on e on each si de) .
www.gateway.com 15 3 Remov e t he bezel lo ck k e y s f r om the inside of the be z el, then in sert the le ft side o f the bezel into the lef t handle and s wing t he right side of the bez el in until it snap s int o place .
CHAPT ER 2: Setting Up Your Server 16 Starting y our server Bef or e you start y our server f or t he first time: • Mak e sure that t he server and monitor ar e plugged into a pow er outlet or surge prot ec t or and th at t h e sur g e pr ot ect o r (i f y o u ar e u si ng one) is t urn ed on.
www.gateway.com 17 T ur ning of f your se rv er E very time you turn off y our serv er , first shut down the opera ting sy st em. Y ou may lose data if y ou do not follow t he correc t procedure .
CHAPT ER 2: Setting Up Your Server 18.
CHAP TER 3 19 Maintaining Y our Serv er • Caring f or y our server • Preparing f or sy stem r ecov er y • S yst em a dministration • Identify ing y our serv er • Updating the ba seboard mana.
CHAPT ER 3: M ain tain ing Yo ur Serv er 20 Car ing f or y our serv er T o ext end the lif e of your server : • B e c a r e f u l n o t t o b u m p o r d r o p y o u r s e r v e r . • When transpor ting your se rver , we recommend t hat you put it in the origin al pack aging mate ria ls.
www.gateway.com 21 Cleani ng th e screen If your computer s c reen is an L CD monitor , use onl y a damp, sof t clot h t o clean it. Nev er spra y wate r d i rect ly onto the scre e n. - OR - If y our computer s c reen is not a f lat panel disp la y , us e a sof t c loth dampened with glas s c leaner to c lean the scr een.
CHAPT ER 3: M ain tain ing Yo ur Serv er 22 Server s ec ur ity Lo c k in g th e se r ve r T o lock the serv er: 1 Remo v e t he bezel lock k e ys fr om the inside of the bezel, then snap on the bez el. The handles must be in stalled f or t he be z el t o snap on .
www.gateway.com 23 Updating t he ba s eboar d management contr oller fi rmw a re The bas eboard man agement controller (BMC) pe rf or ms se v er al s yst em manag ement functions such a s: • Monitor.
CHAPT ER 3: M ain tain ing Yo ur Serv er 24 To i n s t a l l A c r ob a t Re a d e r 7: • C lick the link f or Ac robat on the Doc umentation page. - OR - Run DocsReaderapp21279Setup.
www.gateway.com 25 Booting th e Serv er C ompa nion D VD By booti ng the Ser ver Compan ion DVD y ou can repair applications and driv ers or e xit t o the command prompt. T o b o o t t o t h i s D V D : 1 W it h y o ur se rv er tur n ed on , in s er t t he Server Comp anio n DV D in to th e DVD dr ive.
CHAPT ER 3: M ain tain ing Yo ur Serv er 26.
CHAP TER 4 27 Installing C omponents • Preparing t o install compon ents • Pre venting static elec tric ity dischar ge • Opening the server ca se • Closi ng the ser ver case • Installing and.
CHAPTER 4: Inst alling Components 28 Pr epar ing t o install components Selec ting a place t o w ork W o r k o n y o u r s e r v e r i n a n a r e a t h a t : • Is c l ean ( a v oi d du st y ar ea s). • Is a low- static en v ir onment (a v oid car pet e d area s) .
www.gateway.com 29 • We ar a gr ounding wrist str ap (a v ailable at most elec tr onics st or es) and attac h it t o a bare metal part of the server . Y ou can also t ouch a bare metal surf ace on the back of the server with you r fing er . • A v oid static -cau sing surf a ces such as car pet ed f loors, pla stic, and packing f oam.
CHAPTER 4: Inst alling Components 30 7 Pres s do wn t he tw o blue r etaining c lips ( 1 ) on the s ides of t he t op f r ont cov er , then slide th e top fro nt cove r b ack (2 ) a nd li ft it off the se rve r .
www.gateway.com 31 4 Re place the scr e w (2) to hold the rear top co v er in place. 5 R econnect t he power cor d(s) and all other cables. Installing and r emo vi ng dr i v e s Y our server’s basic configur ation includes one optical driv e and as many as f our S A T A or SAS hot -sw a p hard dri v es.
CHAPTER 4: Inst alling Components 32 5 L oo se n t he th umb sc r e w ( 1) holding t he r eta ining c l ip (2) again st th e side of the optical dr i v e , th en move the ret ai nin g cl ip away fro m th e d rive. 6 Push the op tica l driv e to the righ t to release the d ri v e f rom the driv e bay , then pu ll the driv e out of the ba y .
www.gateway.com 33 9 Slide t he new optical d r iv e int o the driv e bay , maki ng sure y ou align t he driv e with the r etainin g clip s on bot h side s of th e dri v e . 10 Pu sh t he r e taining c lip aga inst th e dri v e until sn ug, th en tight en t he t humb sc r e w t o hold the dri v e in place.
CHAPTER 4: Inst alling Components 34 3 P ull t he d ri ve ca rr i er s tr ai ght out of t h e se rv er . 4 If you ar e replac ing a hard driv e , remov e the f our sc re w s f rom t he botto m of the dri ve tr a y th at sec ure t h e old h ar d dr i v e to the tr a y , t h en r em o v e t he d r i v e f r om t he tr a y .
www.gateway.com 35 6 In se r t th e d i s kette d rive / a da p te r a sse m b ly i nto t he l e ft-h a nd h a rd d rive b ay , th en s e cur e i t with the thumbscrew that came with the kit. 7 C onn ec t a US B cabl e f r o m t he U SB fl opp y dri v e c onn ec t o r (J2 7) on t he s y st em boar d t o t he ba ck o f th e d is kette d rive.
CHAPTER 4: Inst alling Components 36 Installing memor y Y our server supports eight 66 7 MHz fully-buff ered DIMMs (FB-DIMMs) t o pro vide up to a maximum of 3 2 GB w ith full y -buf f er ed suppor t. Suppor t ed DIMM si z e s inc lude 5 1 2 M B, 1 GB, 2 GB, and 4 GB.
www.gateway.com 37 Mi rro rin g mo de : 4 512 M B 512 M B 512 M B 512 M B ---- 2 GB 1 G B 1 G B 1 G B 1 G B ----4 G B 2 GB 2 GB 2 GB 2 GB ---- 8 GB 4 G B 4 G B 4 G B 4 G B ----1 6 G B 512 M B - 512 M .
CHAPTER 4: Inst alling Components 38 Spar ing mode For the spar ing mode , plea se f ollow the online spar e FBDIMM confi guration r equirements (in addition to general configur ation requirements) below : • Whe n onl y DIMM 1 and DIMM3 ar e be ing u s ed, t he y mu st be full y po pulat ed wit h du al-r ank FBDIMMs.
www.gateway.com 39 Installing and r emo vi ng P CI e xpansion car ds The sy st em board prov ides one 280-pin PCI-X/PCI-E x 8 expansion slot and one PCI -E x8 expansi on slot.
CHAPTER 4: Inst alling Components 40 5 Pl ace the PC I ris er as sembl y on a stable , static -fr ee surf ace , t hen loos en t he sc re w ( 3) holding the card loc k in place .
www.gateway.com 41 10 Insert t he new PCI card int o the ris er card, making sure an y connect ors e xt end thr ough the slot at the back of the ass embly and that the card is fully seat ed in the riser card. 11 C lo s e t he loc k t o hol d t he car d i n pla ce , then r ep lace th e s c re w tha t hol ds th e loc k c lo s ed.
CHAPTER 4: Inst alling Components 42 T o replace the s y st em f a ns and the f an board : 1 F ollow th e instruc tions i n “Pre venting static elec tricity dis charge” on page 2 8 . Make sure that y ou turn of f the serv er , then unplug the powe r cord(s) and all other cables connect ed t o the ser ver .
www.gateway.com 43 10 Co nn ect th e 6- p in fa n t a ch ca bl es fro m the fa ns to th e fan ta ch c on n ecto rs o n the fa n bo ar d. 11 F ollo w t he instr uc tio ns in “C losing the ser v er case” on page 30 .
CHAPTER 4: Inst alling Components 44 6 Unlock the load le v er and lift it up ( 1) , then open the load plat e (2) to r elease t he proces sor . 7 L ift t he proc es sor out of the soc k e t (3) and place it in a static -free bag or ca s e f or st or age .
www.gateway.com 45 10 Place t he heat sink on t he installed proce ss or (2) , making sure that the locking tab on the so c k e t go e s t hr o ugh the hol e in t h e hea tsi nk. 11 Pu sh down t he heat sink retaining lev ers ( 3) and l oc k them under the retaining hooks on th e he at s ink s oc k et.
CHAPTER 4: Inst alling Components 46 If your s erver is only equipped with a single power suppl y , t he server must be tur ned off and the A C power cor d remo v ed bef ore r eplacing it.
www.gateway.com 47 4 R emo ve t he pow er distribution board cov er ( 1) b y pulling it out of the chas sis. 5 Disconnect the main po w er , CPU pow er , backplane power , I 2 C power , and mi dplane power cable s. S ee “S yst em board” on page 4 for t he location of the connec tors on the sy st em boar d.
CHAPTER 4: Inst alling Components 48 5 Remove the screws (3 ) holdi ng the power c age in the chassis. 6 Slide t he po wer cage (4) tow ard the f ron t of the c ha ss is t o disenga ge the loc king tab s, t hen lif t the po wer cage out of th e cha s sis.
www.gateway.com 49 4 R emov e all of t he hot -s wap dr i ve carr iers f rom th e server and mak e note of whic h ba y you remo ve each dri ve f rom. F or instructions, s ee “R emo vi ng and installi ng a har d dri v e” on page 3 3 .
CHAPTER 4: Inst alling Components 50 R eplac ing t he R OMB bat t e r y pac k f or t he mezz anine RAID card T o replace the R OMB ba tt ery pa ck f or the m ezzanine RAID card: 1 F ollow th e instruc tions i n “Pre venting static elec tricity dis charge” on page 2 8 .
www.gateway.com 51 Installing and r emo vi ng an option al mezz anine boar d F or inf or mat ion on installi ng and r emo v ing t he option al mezz anine boar d, r ef er to t he Mezz anine Board U s er Guide .
CHAPTER 4: Inst alling Components 52 10 T urn on y our s erver , then pres s F2 at an y time af t er y ou s ee t he LEDs on y our k eyboar d f la sh or turn off . The BIO S Setup utility opens. 11 R est or e an y BIO S se t tings that y ou w rot e do wn in St ep 3 .
www.gateway.com 53 3 R emo v e the s y st em f ans and fan cage b y f ollo w ing th e instr uc tions in “R eplac ing s y st em fan s” on pa g e 4 1 . 4 Remo ve t he PCI riser ass embly by f ollowing the ins t ructions in “Installing and removing PCI expansion car ds” on page 3 9 .
CHAPTER 4: Inst alling Components 54 12 Tight en t he tw o s ys tem board thumb s cr ew s y ou loosened in St ep 8 . 13 Connec t the cables you remov ed in Step 7 14 Insta ll the mem ory by f ollowin g the instructio ns in “Installing memory” on page 36 .
CHAP TER 5 55 Using the BIOS Setup Utility • Opening the BIO S Setup utility • Updating the BI O S • Re c ove ri n g th e B I OS • Res ett i n g th e B I OS • Updating and reco ve ring t he .
CHAPTE R 5: Using the BIOS Setup U tility 56 Opening t he BIO S Se tup utility The BIO S Setup utility st ore s basi c set tings f or your serv er . Thes e set ti ngs include basic har dw are configuration, r es ource s et tings, and pas sw ord s ec urity .
www.gateway.com 57 R eco v er ing t he BIO S If you encounter a pr oblem while you are updating the BIOS, suc h as a pow er outage , the BIO S update ma y not be successful. If the sy st em continues to try to boot f rom the new , corrupted BIO S, y ou c an m an u all y r e co v er th e old BIO S s o y o u ca n try a not he r u pdat e.
CHAPTE R 5: Using the BIOS Setup U tility 58 12 F ollo w t he instr uc tio ns in “C losing the ser v er case” on page 30 . 13 Plu g in the AC p owe r c ord s a nd tu rn on the ser ve r , th en veri fy th at the rec ove ry was succe ssf ul.
www.gateway.com 59 7 F ollo w t he instr uc tio ns in “C losing the ser v er case” on page 30 . 8 R econnect t he power cor ds and turn on the server . The BIO S is rese t. 9 T urn of f the serv er , then disconnect t he pow er cords and all ot her cables connect ed t o the ser ver .
CHAPTE R 5: Using the BIOS Setup U tility 60 Updating and r eco v er ing t he BMC Updating t he BMC f ir m w are To u p d a te t h e B M C f i r m wa r e : 1 Do wn lo ad th e B MC fi rmwar e z ip fi le from suppor t.gat e w a y .com . 2 R ea d t he r el ea s e no t e s f or th e fi r m w ar e u pdat e.
www.gateway.com 61 8 F ollo w t he instr uc tio ns in “C losing the ser v er case” on page 30 . 9 Plug in the A C pow er cor ds and turn on the server f or nor mal use .
CHAPTE R 5: Using the BIOS Setup U tility 62.
CHAP TER 6 63 T r oubleshooting • T elephone support • T u t ori ng and training • Saf ety guidelines • Er ror messag es • T roubleshooting.
CHAPTER 6: Troublesh oot ing 64 T elephone suppor t Bef ore calling Gat ew a y C ust omer Care If you ha ve a tec hnical problem wit h your serv er , f ollow the se r ecommend ations bef ore contac ti.
www.gateway.com 65 T ut oring and tr aining Gat ew a y 's C u st omer Care pr of essionals cannot pr o vi de hardw a r e and sof tw are training. Inst ead, Gat ew a y r ecommends the f ollow ing training re sour ces.
CHAPTER 6: Troublesh oot ing 66 Boot messages Boot F ailure ... T his i s a gene r ic m es s age i ndi cat ing th e BI O S co ul d not boot f rom a par ticular de vi ce. T his mes sage is usuall y f ollow ed by other inf ormation concerning the dev ice .
www.gateway.com 67 Seconda ry Mast er Dr i ve - A T API Incompatible Th e IDE/A T API de v ice con figur ed a s Secondary Ma st er f aile d an A T API compa tibility t est. This mes sage is typically displa y ed when the BIOS is trying to det ec t and configure IDE/A T AP I dev ices in POST .
CHAPTER 6: Troublesh oot ing 68 NVRAM Ignored The NVRAM data used to st or e Plug’ n’Pla y (PnP) data was not u sed f or s yst em configura tion in POST . NVRAM Bad The NVRAM data used to st or e Plug’ n’Pla y (PnP) data was not u sed f or s yst em configura tion in PO ST due t o a data error .
www.gateway.com 69 Mi scel lane ous me ssa ges K e y board Error K e yboard is not pre sent or the hardw are is not r esponding when th e ke yboard contr oller is init ialized. K e y board/Inter fa ce Error K e yboard Contr oller f ailure . T his ma y indicate a pro blem with sy stem hardw ar e .
CHAPTER 6: Troublesh oot ing 70 • R emo ve t he t op panel b y f o llow ing t he instr uction s in “Op eni ng t he s erv er ca s e” on pa ge 29 , then mak e sur e that all cabl es in side the ca se ar e at tac hed sec u r el y .
www.gateway.com 71 LED inf or mation See the f ollow ing table f or a des cri ption of this server’s LEDs and the inf ormation the y p r o v ide: LED Name Function Location Color Descr ipt io n ID A.
CHAPTER 6: Troublesh oot ing 72 Diagnostic LEDs Th is s yst e m board p ro v ide s a se t of eigh t diagnos tic (P or t 80) LEDs . If you are tr ouble shooting y our syst e m, the se LEDs can help you deter mine where errors are taking place.
www.gateway.com 73 The e ight diagnostic LEDs ar e di vided i nto tw o group s. LEDs f r om CR1 5-CR1 2 comprise one gr oup, and LEDs fr om CR1 1-CR8 comprise the other gr oup. The two gr oups repr es ent the two digits of the he x code. The CR1 5-CR1 2 gr oup stands f or the first digit and the CR1 1-CR8 gr oup stands for the se cond.
CHAPTER 6: Troublesh oot ing 74 0 6 D o R / W t e st t o C H - 2 c o u n t r e g . I n i t i a l i z e C H - 0 a s s y s t e m t i m e r . I n s t a l l t h e POS T INT1Ch handler . E n able IRQ-0 in PIC f or syst em timer int errupt. T rap INT1 Ch v ec t or t o “PO S T INT1C hHa ndlerBloc k .
www.gateway.com 75 40 Dete ct diff erent de v ice s (para llel port s, ser ial por ts, and cop roce s sor in CP U , and s o on) succe ss full y inst alled in t h e sy st em and updat e the BD A, EB D A, and so on. 50 Programming the memo ry hole or a n y kind of imple mentation that needs an adjustment i n sy stem RAM siz e , if needed.
CHAPTER 6: Troublesh oot ing 76 Bootblock initialization code checkpoints Th e Bootbloc k initiali z ation code s e ts up the c hips e t, memory , and other components bef ore sy st em memor y is a vailable .
www.gateway.com 77 DIM code checkp oints Th e De v ice In itiali z ation Ma nager (DIM) gets contr ol at v ari ous time s during BIOS PO S T t o in itiali z e diff er ent sy st em bu se s. T he f ollow ing table des cr ibes t he main chec kpoints where the DIM module is a cces s ed.
CHAPTER 6: Troublesh oot ing 78 A CPI runtime checkpoints AC PI checkpoints are displa y ed when an ACPI-capable operating sy st em either enters or lea v es a sleep state .
www.gateway.com 79 • T u r n o f f y ou r s er v er , t h en r em o v e a l l h a r d d r i v es a n d pu sh t h e m i n a g a i n t o m a k e s u r e t h e dri v e s are seat ed corr ec tly . For instruc tions, s ee “R emo v ing a nd instal ling a h ar d dr i ve ” on page 3 3 .
CHAPTER 6: Troublesh oot ing 80 Monit or Y our server is r unning but there is no pictu re • Adjust the brightnes s and contrast control s to t he center position. • Mak e sure t hat the monitor is plugged in and turned on. If the monitor is turned on, the pow er LED should be lit.
AP P ENDI X A 81 Server Specifications • S yst em s pec ifications • S yst em board specif ications • En v iro nmental specif ications • Electr onic specif ications • Additional specificatio.
APPENDIX A: Server Specifications 82 S y st em spec ifications S y st em boar d spec if ications Case size (H×W× L) 1 .7 0 × 1 5.79 × 2 9 . 5 8 inches (4.
www.gateway.com 83 En v ir onmental spec if ications Th e f ollo w ing spec if ications iden tify maximum env ironmental condit ions. At no time should t he server run under conditions which v iolate the se spec ifications. Elec tronic spec ifications Memor y map St orag e PCIe x8 mezz anine boar d f or SAS HB A and RAI D suppor t.
APPENDIX A: Server Specifications 84 Int e rr upts The f ol lowi ng table reflects a typic al configuration, but you can c hange thes e int errupts. U se t his inf ormation t o de t ermine how t o progr am eac h int errupt.
www.gateway.com 85 Processor po w er con nect or (J6) VGA c o n n e c to r 8 P o w er good 9 Stand b y +5 V 10 + 12 V 11 +1 2 V 12 + 3 .3 V 13 +3.3 V 14 - 12 V 15 Ground 16 D C _ O N ( so f t o n /o f.
APPENDIX A: Server Specifications 86 Seria l port c onnec tor K ey board and Mouse connect ors 3 Blue (a nalog color s ignal B) 4 No conn ec tion 5 GND 6G N D 7 +5 V 8G N D 9 +5 V 10 G N D 11 No conne.
www.gateway.com 87 Ex te rn a l U S B co n n ec to r s I 2 C (SMBus) connector Addition al spec ifications F or mor e in f orm at io n a bou t y o ur s e rv er , su c h a s me m ory si z e , h ar d dr i ve si z e, a nd pr o ce s sor t y pe , v isit Gat e w a y’ s eS u pp o r t page at support.
APPENDIX A: Server Specifications 88.
AP P ENDI X B 89 BIOS Set tings.
APPENDIX B: BIOS Settings 90 If you e v er need to re stor e your BIOS se t tings, su c h as af t er a sys t em board change, a record of the set ting s will mak e the proce ss muc h easier . Y ou can print this appendix, then record y our custo m B IOS setti ng s on th e p rinto u t.
www.gateway.com 91 Intel Speed Step™ T e c h Auto Disabled Memory Co nfigur ation Memory Perf ormance Mode Non-R edundant ■ Interlea ved ■ Single C hannel Mirror ■ Mirrors branch space ■ Bet.
APPENDIX B: BIOS Settings 92 Prim ary IDE Sla v e (aut o-det ect ed) Selec ts IDE Co nfigur ation sub-me nu. Secondary IDE Ma st er (aut o-dete ct e d) Selec ts IDE Co nfigur ation sub-me nu. Secondary I DE Sla v e (aut o-det ect ed) Selec ts IDE Co nfigur ation sub-me nu.
www.gateway.com 93 Seria l P ort 1 I RQ IRQ3 IRQ4 IRQ10 IRQ1 1 PS/2 K ey boar d Pre se nt PS/2 Mou se Present US B C onfigur ati on USB De vices En abl ed (L ist of US B de v ic es d et ect ed b y BIOS ) Le gacy U SB Supp ort Disabled Enabl ed Auto USB 2.
APPENDIX B: BIOS Settings 94 Lo w Pr ofile Ris er Slot ■ T op PCIe s lot Optio n ROM (enabled or disabled) ■ Bott om PCIe slot Optio n ROM (enabled or disabled) Boot Boot Set ting s Co nfigur atio.
www.gateway.com 95 Admini str ator Pa ssw ord (Installed/N ot install ed) U ser P a ss w ord (I nstalled/ Not instal led) Ch an ge Ad mi ni st ra tor Pa ss wor d (Set or clear Admin pas sw o rd) User .
APPENDIX B: BIOS Settings 96 HSC F W R ev is ion (H SBP) Firmware re visi on of the Hotsw ap contr oller . N/A if not pres ent. Remot e Access Co nfigur ation Remot e Access Disabled Enabl ed Seri al .
www.gateway.com 97 The f ollow ing second leve l subm enus ar e accessed f rom the submenu i ndicat ed in t he first col umn. Discar d C hanges Load Optimal Defaults Loa d Custo m D efaul ts Save C us.
APPENDIX B: BIOS Settings 98 S.M.A.R.T . Au to Disabled Enabl ed 32Bit D ata T r ansfer Disabled Enabl ed BIOS sub menu BIOS 2nd le v el submenu Settin g Val u e USB Configuratio n USB Mass St orage De vi ce Conf igura tion USB Mass St orage R ese t Delay 10 S ec 20 Sec 30 S ec 40 Sec De vi ce #1 O nly di spla y ed if a de v ice is de t ec ted.
AP P ENDI X C 99 L egal Inf ormation.
APPENDIX C : Legal Information 100 R egulat ory complian ce stat ements Unit ed Stat e s of America Fede ral C ommunications C ommission (FCC) Unintenti ona l emitter per FCC P a rt 1 5 FC C P art 1 5.
www.gateway.com 101 For unique ident ification of the product configuration, please submit the 1 0-digit ser ial nu mber found on the product to the responsible party .
APPENDIX C : Legal Information 102 En v ir onmental inf or mation The product y ou have purchas ed cont ains extract ed natural res ources that have been used in the manufacturing process. T his prod uct may contain substa nces known to be hazardous t o the envir onment or to human he alth.
AP P ENDI X D 103 S a fe t y I n fo r m a t i o n.
APPEND IX D: Safety Informa tion 104 Important s af ety inf ormation Y our Gat ewa y sy st em is designed and te sted t o meet the late st standards for sa fe ty of information tec hnology equipmen t.
105 Index Numerics 5.25 -inch dri ve locati on 2 A accessories safety precaut ions 104 ACPI runti me checkpoints 78 add-in card see card administ rator password 22 Adva nced menu BIOS Set up utili ty .
Index 106 fillin g emp ty drive b ays 35 findin g specif icatio ns 82 , 87 front pan el conn ector 4 G Gateway Custom er Care 64 Learning Libraries 65 Web addre ss 8 Web site 8 Gateway Systems Manager.
107 www.gateway.com static electri city 28 surge prot ectors 10 troubleshoot ing 80 uninte rrupti ble po wer su pply (UPS) 11 power cage, replacing 47 powe r distrib ution bo ard insta lling 46 power .
Index 108 keyboard 79 LED in for matio n 7 , 71 master boot record 79 memory 79 monito r 80 optical d rive 78 powe r 80 power source probl ems 10 processo r 80 safety guideli nes 65 techni cal support.
.
A MAN E - 9 42 5R USR GDE R3 05/07.
Ein wichtiger Punkt beim Kauf des Geräts Gateway E-9425R (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Gateway E-9425R noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Gateway E-9425R - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Gateway E-9425R reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Gateway E-9425R erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Gateway E-9425R besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Gateway E-9425R verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Gateway E-9425R. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Gateway E-9425R gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
