Benutzeranleitung / Produktwartung LT8-M26BB des Produzenten Funai
Zur Seite of 28
2 EN PRECAUTIO NS POWER SUPPLY The main power supply is enga ged when the main plug is plugged in a 220-240 V ~ , 50 Hz AC outlet. To operate the unit, press [ Q (standby -on)] to turn on the unit. WARNING: LIVE PARTS INSIDE. DO NOT REMOVE ANY SCREWS .
3 EN INTRODUCTION A Note about Recycling Following information is only for E U-member states: Following information is only valid EU-member States: Disposal of batteries and/or accumulators Features .
4 EN Contents PRECAUTIONS .................................................................. 2 INTRODUCTION .................................... ............................. 3 A Note about Recycling .................................................. 3 Features .
5 EN THINGS TO DO FOR THE FIRST TIME Attaching th e base Y ou must attach the base t o the unit to have it as a table top unit . Be sure th e front a nd rear o f th e base match the proper direction. To remove the base from this unit U nscrew the Phillips pan screws on step 3.
6 EN OPERATING CONTROLS AND FUNCTI ONS All operations described are base d on the use of the remote control. Some operat ions can be carried out using the bu ttons on th e control panel. Control Panel 1. Q (s tandby-on) (p . 8) Pr ess to turn on or off (standby ) the unit.
7 EN Rear Panel 26. (Aerial) input jack (p. 8) Connect an RF coaxial cable (not supplied) to an anten na or RF output jack of a cable system. 27. PC-IN (RGB) inpu t jack (p. 1 0) Connect a VGA cable (not su pplied) to the monitor jack of a PC. 28. HDMI (HDMI 1 / HDMI 2 / HDMI 3) input ja ck (p.
8 EN PREPARA TION FOR USE Installing the Batteries 1) Open the battery compartment cover . 2) Insert “R6/AA, 1.5V” penlight batteries into battery compartment in the direction as indicated by the polarity (+/–) markings. Batteries installed with incorrect polarity may damage the remote unit.
9 EN [COMPONENT CONNECTION] RCA component video co nnection offers better picture quality. 1) Connect the component video output jack (Y, Pb, Pr) of y our video device and the COMPON ENT vide o (Y, Pb, Pr) input jack of this unit. U se an R CA component video cable (not supplied).
10 EN [PC CONNECTION] If you connect this unit and your PC, you can use this unit as a computer mo nitor. 1) Connect the moni tor jack of your PC and the PC-IN (RGB) jack of this unit. Use a V GA cable with ferrite core (not supplied). 2) Connect the audio line out ja ck of your PC and the PC-IN (AUDIO) jack of this unit.
11 EN SETUP FOR USE Initial Setting You need to set the followings to use the unit appropriately for the first time you turn on the unit . 1) Pre s s [ Q (standby-on) ] to turn on the unit. • “Initial Setup ” language m enu will appear . 2) Pre s s [ K / L ] repeatedly to select the menu language y ou want, then press [OK] .
12 EN OPERATIONS Watching a TV Programme To select a cha nnel Press [ / ] repeatedly to select your desired channel. or Press [the Numb er buttons] to enter a channel number then [OK] for quicker access. • If you want to select the channel 24 without pressing [OK] , press [2] first, then press [4] within 3 seconds.
13 EN Sound Select 1) Pre s s [SOUND] to display the curr ently selected audio language and the number of available languages. 2) Pre s s [SOUND] repeatedly to cycle through the available audio languages. 1) Pre s s [SOUND] to display the currently selected audio mode.
14 EN EPG (Electronic Programme Guide) You can easily find a channel or see the detailed chann el information. EPG gives you sche duled information of the TV programmes. 1) Pre s s [GUIDE] . • E PG will appear. 2) Pre s s [ K / L ] to select a channel, then press [ 1 ] .
15 EN Changing the TV Screen Display Mode You can select your favourite TV screen size. Press [ASP ECT] repeatedly to switch the TV screen display mode. For SD (Standard Definition) video signal “Auto” Selects the TV screen display mode automatically.
16 EN OTHER SETTINGS Picture Adjustment You can adjust the pi cture settings according to your personal preference. These settings are automatically stored afte r exiting the picture menu. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “Pictur e”, then pr ess [OK] .
17 EN Advanced Picture Adjustment You can adjust the detailed pict ure settings acco rding to your personal preference. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “Pictur e”, then pr ess [OK] . 3) Pre s s [ K / L ] to select “F eatures ”, then press [OK] .
18 EN PC Settings You can adjust the PC screen posi tion, clock and phase. Make sure your PC is connected. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “Pictur e”, then pr ess [OK] . 3) Pre s s [ K / L ] to select “PC Settings ”, then press [OK] .
19 EN “Auto Volume Control” You can set to keep a constant lo udn ess differential between the TV commercials and the programs. 3) Pre s s [ K / L ] to select “ Auto V olume Control ”. 4) Pre s s [ 0 / 1 ] to select the setti ng (“On, Off ”) you want.
20 EN Audio Language Selection You can select the main language. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “TV ”, then press [OK] . “Audio Lang uage” 3) Pre s s [ K / L ] to select “ A udio Language”. 4) Pre s s [ 0 / 1 ] to select the language you want.
21 EN Analogue Manual Scan You can adjust an a nalogue ch annel indi vidually. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “TV ”, then press [OK] . 3) Pre s s [ K / L ] to select “Channel”, then press [OK] . 4) Pre s s [ K / L ] to select “Manual Scan (Analogue)”, then press [OK] .
22 EN Channel Skip When using [ / ] , the channel you selected will be skipped. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “TV ”, then press [OK] . 3) Pre s s [ K / L ] to select “Channel”, then press [OK] . 4) Pre s s [ K / L ] to select “Channel Skip ”, then press [OK] .
23 EN Channel Edit You can ed it channel informa tion. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “TV ”, then press [OK] . 3) Pre s s [ K / L ] to select “Channel”, then press [OK] . 4) Pre s s [ K / L ] to select “Channel Edit”, then press [OK] .
24 EN Fine Tune 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “TV ”, then press [OK] . 3) Pre s s [ K / L ] to select “Channel”, then press [OK] . 4) Pre ss [ K / L ] to select “Fine T une”, then pr ess [OK] . • “Channel List” will appear .
25 EN Subtitle Settings 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “Setup ”, then press [OK] . 3) Pre s s [ K / L ] to select “S ubtitle ”, then press [OK] . • “Subtitle ” menu will appear . “Subtit le(Analogue)” 4) Pre s s [ K / L ] to select “S ubtitle(Analogue)”.
26 EN C.I. (Common Interface) This unit is equipped with a C.I. slot. You can enjoy additional services with this func tion, for example Pay TV. The access restrictions menu will appear on the TV screen when a CI module is installed. 1) T urn off the unit and unplug from an AC outlet.
27 EN “Maturit y Rating” You can set the parental rating to avoid watching an inappropriate programme for your children. 4) Pre ss [ K / L ] to select “Maturity Rating”, then press [OK] . 5) Pre ss [ K / L ] to select “Par ental Rating”. 6) Pre s s [ 0 / 1 ] to select the age restriction.
28 EN MAINTENANCE Panel Cleaning • If the LCD panel should require c leanin g, wipe it with a cotton or soft cloth. Before cleaning the panel, disconnect the power cord. Servicing • Should your unit become inoperative, do not try to correct the problem by yourself.
29 EN SPECIFICATIONS General Specifications Other Specifications • Designs and specifications are subjec t to change without noti ce and without our leg al obligation. DECLARATION OF CONFORMITY This product com plies with th e requirement of the directives is in compliance with following regulations.
Ein wichtiger Punkt beim Kauf des Geräts Funai LT8-M26BB (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Funai LT8-M26BB noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Funai LT8-M26BB - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Funai LT8-M26BB reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Funai LT8-M26BB erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Funai LT8-M26BB besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Funai LT8-M26BB verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Funai LT8-M26BB. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Funai LT8-M26BB gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
