Benutzeranleitung / Produktwartung XG1200 des Produzenten Fujitsu
Zur Seite of 40
XG1200 Hardware Guide P3N1- E061-0 1EN P3N1-E061-01EN.book 1 ページ ２００５年９ 月１５日 木曜日 午前１０時４分.
Preface 1 Y ou have purchased the XG1200, a compact, 12 port 10 Gigabit Ethernet layer 2 switch that achieves unsurpassed standards of high throughput and low-latency performance. This manual explains the procedu res required to install your XG1200 and should be read and understood before you start using your XG1200.
2 Fo r Safe Use of the XG1200 W arnings are included th roughout this manual in order to pre vent injury to the user and/or material damage. There are two levels of wa rnings, both of which are compo sed of a symbol and a message de scribing the issue.
For Safe Use of the XG1200 3 This symbol indicates the po ssibility of serious or fata l injury if the XG1200 is not used properly. For your safety and that of others , please follow these guidelines. Category Warning Danger of electric shock or fire Never attempt to disassemble, dismantle, upgrade, or recycle the XG1200 by yourself.
4 Fo r Safe Use of the XG1200 This symbol indicates the possibility of minor or mod erate personal injury, as well as damage to the XG1200 and/or to other users and their property, if th e XG1200 is not used pro perly. Category Caution Danger of device damage Do not place the XG1200 on it s side or stack up multip le XG1200s.
For Safe Use of the XG1200 5 Never attempt to dismantle or modify the XG1200 yourself. This is extremely dangerous since the XG1200 includes both high volt age and high temp erature components. If maintenance is required, contact the vendor's service department.
6 Fo r Safe Use of the XG1200 FCC Class A CE Marking CAN/CSA C22.2 No. 60950, UL60950 an d EN60950 Under certain conditions, twisted pair cables can become charged with static electricity . Connecting a statically charged twiste d pair cable to a device can cause the device or its LAN port to operate fa lsely or to become da maged.
About This Manual 7 This manual is written for an administrator who has responsib ility for network system configu- ration, maintenance, and management. Understanding of the following knowledge is expected. • Basic knowledge of networks, intrane ts and the internet.
8 About This Manual This manual uses the following symbols. Company names and products names referred in this manual are registered trademarks or trademarks of respective companies.
3 Content s 9 1 2 A Contents Preface ............... ................... ................... .................... ...................... .......... 1 For Safe Use of the XG1200 .............. ....................... ................... ...............
10 Contents Appendix ............ ............................ .......................................... ........... 37 Appendix-A Specifications .... ....................... ................... ....................... .............. 38 A.1 Product Specifications .
Before Use This chapter lists the items that should be in the XG1200 packag e, describes the names and functions of the various compo nents of the XG1200. 1-1 Parts List .................................................................................
12 Before Use 1-1 Part s List Before proceeding, check that all of the following parts were included in your XG1200 package. Contact the vendor's service department if any part s are missing and/o r the manual has any miss- ing or wrongly coll ated pages.
Part s List 13 1 • XG1200 The XG1200 itsel f (from zero to eight Xenpak module s may be installed). • Power Cord A 3-pin cabl e to connect the XG1200 to a power supply. • Serial Cross Cable A cable t o connect the XG1200 t o a PC when the s ettings need to be ad justed.
14 Before Use The following explains the names and functi ons of the components at the front of the XG1200. • Power LED (Green) Lights when the XG1200 is receiving power. • Alarm LED (Orange) Lights when there is a problem with the XG1200. • Status LED (Green) Lights when t he XG1200 is in an operable state.
XG1200 Comp onents 15 1 The following e xplains the names and functions of the components at t he rear of the XG1200. • Power Switch Used to turn t he XG1200 on/of f. • Power Supply Uni t Supplies powe r to the XG1200 (inc ludes an exhaust fan) . - Power Supply LED (Green) Lights when the XG1200 is on.
16 Before Use There are th ree main indicato r LEDs on the fr ont of the XG1200: Power LED, Alarm LED, and Status LED. The following explains th e LED display under various conditions.
Labels 17 1 Obey the following warning: 1-3 Labels A warning sticker , product nameplate, product ID label, and MAC la bel are to be found in various places on the XG1200.
18 Before Use This indicates the model, part number, serial numb er, etc. This indicates the model, serial number, etc. Product nameplate MODEL. PART NO. PA SER NO. P 1 50/60Hz **** Kg 100-240V *** **** A/INPUT 0 1 2 3 4 5 6 7 8 9 a FUJITSU company MADE IN JAPAN 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 ****** ***** Model Part Number Rev.
Labels 19 1 This indicates the MAC address: MAC addresses are allotted relative to the address on the MAC la bel: MAC Label Address on the MAC label Location xx:xx:xx:xx:x x:xx Mng-LAN xx:xx:xx:xx:x x.
20 Before Use.
Installation and Operation This chapter explains how the user should proceed from installation to opera tion of the XG1200. 2-1 Installation Overview ............................................................................... 22 2-2 Installation Procedure .
22 Instal lation and Opera tion Install the XG1200 and the proceed with normal operation as follows: 2-1 Inst allation Overview This section reviews the flow of work as the user proceeds from in stallation to operation of the XG1200.
Inst allation Procedure 23 2 Before installing the XG1200, read " For Safe U se of the XG1200" (page 2) a nd comply with the installa tion requiremen ts described belo w. When installin g the XG1200, a certai n amount of installation space is necessa ry.
24 Installation and Operation Only use the XG1200 under t he temperature, humidity and other environmental cond itions specified in "A.2 Installation Specifications " (page 38). Using th e XG1200 outside the follow- ing ranges can shorten th e lifetime or cause th e failure of the XG1200.
Inst allation Procedure 25 2 The following explains how to install the XG1200 in a 19-inch rack. 1. Take the XG1200 out of its box. 2. Fix the cage nuts and rails to the rack posts.
26 Installation and Operation 17:100 1:2 Front [When the rack has round post holes] Rack Post Rack Post Rack Post Rack Post Rack Nuts Rack Nuts Rack Nuts Rack Nuts Rail Rail Rack Screws (Large) Rack Screws (Large) Clip the rack nuts onto the rack post so that the holes are lined up.
Inst allation Procedure 27 2 3. Fix the four rack mounting brackets to t he XG1200. Each of the four rack moun ting bracket s (left, right, back-left, back-righ t) has th ree holes that should line up with matching holes on the sides of the XG1200, as sho wn in the diagram.
28 Installation and Operation 5. This completes the rack installation procedure. CAUTION As the XG1200 can weigh as much as 20kg, it should never be installed by a single person acting alone. At least two people sh ould work together to insert and fasten the XG1200 in the rack.
Cable Connecti on 29 2 The fiber optic cab les need to be connected to the XG1200’s Xenpak modules . 1. Connect the fiber optic cables to the XG1200 . Connect the fibre optic cables to the Xenpa k mod ules Port 1 - Port 12 on th e front. Attention Attention • An fiber optic connect or is used when connecting two fi ber optic cables.
30 Installation and Operation After connecting the peripheral units, connect the XG1200 power cords. W ARNING • Never touch a po wer plug with wet hands, as there i s a risk of electr ic shock. • Do not damage or remodel a power cord, as this may cause electric sho ck or fire.
Cable Connecti on 31 2 2. Connect the power cord to the power ou tlet. Insert the plug at the other end of the power cord into the power strip or wall socket. W ARNING • Unplug the XG1200 du ring thunder-start ing. Continued u se under these condi tions risks lightning damage to the XG1200, and may cause a fire.
32 Instal lation and Opera tion CAUTION Do not move, s hock, or vibrate th e XG1200 while it is on. 1. Turn the power switch to the "on" position by pressing the [ ] side. The Power LED (Green) on the front of the XG1200 should turn on. The Alarm LED (Orange) should turn on for a moment, then should turn off.
Troubleshooting This chapter describes what you should do w hen your XG120 0 has problems . 3-1 S tart-up Problems .................................................................................... 34 3-2 Hardware Problems ..........................
34 T roubleshoo ting [Symptom]The power switch is turn ed on, but the XG1200 does not po wer up. [Cause] Possible causes: 1: Loose cable, or 2: Hardware failure [Soluti on] 1: Check that all cables are connected prope rly, then (if the XG1200 stil l doesn’t turn on) 2: Contact the vendor' s service department.
Hardware Problems 35 3 When a problem is detected with a fan, the fr ont panel Alarm LED lights up in oran ge, the LED of the fan unit in which the error has occurred lights up in orange, and an error is recorded in the event log. If a fan error occurs, contact the vendor's service department.
36 T roubleshoo ting.
Appendix This appendix explains XG1200 specifications. Appendix-A S pecifications ............................................................................. 38 A.1 Product S pecifications ............................................................
38 Appendix The product specifications of the XG1200 are as follows: The installation specifications of th e XG1200 are as follows: Appendix-A S pecifications This section details the specifications of XG120 0. A.1 Product Specifications Items Overview 10 Gigabit ports Port 1 - Port 12 IEEE802.
XG1200 Hardware Guide P3N1-E061-01 EN Date of issue: September 2005 Issuing authority: PFU LIMITED Printed in Japan • C ontents of this manual are not to be reproduced without permission from PFU. • The contents of this manual may be updated without notice.
Ein wichtiger Punkt beim Kauf des Geräts Fujitsu XG1200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fujitsu XG1200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fujitsu XG1200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fujitsu XG1200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fujitsu XG1200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fujitsu XG1200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fujitsu XG1200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fujitsu XG1200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fujitsu XG1200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
