Benutzeranleitung / Produktwartung P65FT00AEB des Produzenten Fujitsu
Zur Seite of 48
English Before using the display , read this manual carefully so that you know how to use the display correctly . Refer to this manual whenever questions or problems about operation arise. Be sure to r ead and observe the safe ty precautions (see the separate "Safety Precautions" manual).
E-2 CONTENT S INFORMATION ........ ......................... ......................... ......... 3 ACCESSORIES ....... ....................................... ........... ......... 4 TRADEMARK INFORMATION ..............................................
E-3 English INFORMATION • Receptacle Make sure that the power cord’ s grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wi re. If you have only a 2-hole receptacl e, you will need to have it repl aced.
E-4 ACCESSORIES HDMI (High-Definition Multimedia Interface) HDMI , the HDMI logo and High-De fi nition Multimedia Interface ar e trademarks or register ed trademarks of HDMI licensing LLC.
E-5 English INST ALLA TION T o prevent the display’ s internal components from overheating , ma ke sure that the display is in stalled in a well-ventilated loc ation. Be sure to use the Fujitsu General Lim ited’ s option al stand, wall-m ounting unit or the other mount ing unit when installing the display .
E-6 INST ALLA TION (Continued) • There is the danger of the display being t oppled by an earthquake or other unexpected shock. T o use the display confidently , t ake toppling prevention measures.
E-7 English P ART NAMES AND FUNCTIONS DISPLA Y SECTION – FRONT / I power button If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by using the remote control or th e control panel of the display .
E-8 P ART NAMES AND FUNCTIONS (Continued) External speaker output terminal (EXT . SP) (for 65” model) Connect this terminal to the optionally ava ilable speaker . When connecting a cable, attach a ferri te core to the cable. (See P . E-6.) *See the speaker instruction manual for more information.
E-9 English Digit a l audio output termi nal (AUDIO OUTPUT DIGIT AL) Connect this terminal to the digital audio input term inal of the audio amplifier . Digital audio signals ar e output in PCM format. Analog audio output termi nal (AUDIO OUTPUT ANALOG) Connect this terminal to the analog audi o input terminal of the audio amplifier .
E-10 P ART NAMES AND FUNCTIONS (Continued) For details, see page Î . REMOTE CONTROL (Power button) Î E-18 Press to switch between Power ON and Off (Standby). y (LIGHT button) Press to light the buttons of the remote control. When no operation is performed, lighting of the buttons goes off after 8 seconds.
E-11 English ( ~ (GUIDE button) Î E-20 Press to display the EPG (El ectronic Program Guide) menu. ) K (MUTE button) Î E-18 Press to temporarily mute the audio.
E-12 USING THE REMOTE CONTROL • T o prevent malfunction, do not apply any form o f severe shock to the remote control. • T o prevent malfunction or deformation, do not allow the remote control to become wet and keep it away fro m hot surfaces or hea ting equipment.
E-13 English When using the remote control, be sure to poi nt it directly at the di splay’ s signal receiver . Make sure that there are no obstacles between th e remote control and the display’ s signal receiver .
E-14 BASIC CONNECTION AND PREP ARA TION OF THE SYSTEM • Before this display can be operated for the first time, the connections a nd settings below mu st be completed. * For best reception (of terrestrial signal), an outdoor antenna (OT A) is recommended.
E-15 English * T o watch p ay-TV broadcas ts, conclude a contract with the pay-TV carrier before connecting/installi ng this product. Consult you r pay- TV carrier for more information. 1. Insert the Smart Card at CI Module. 2. T urn off the power and insert the CI Module.
E-16 CONNECTING T O EXTERNAL EQUIPMENT • Before external equipment is connected , all the power cables must be unplugged. • For the terminal names, see P . E-8. • If the equipment to be connected is equippe d with HDMI output terminal and component video output te rminal, it is recommended to connect to one side or the other .
E-17 English EXAMPLE OF CONNECTING EXTERNAL EQUIPMENT • Connect the V ideo signal cable to the HDMI input terminal, Com ponent V ideo input termin al, or SCAR T terminal. • If the equipment to be connected is equippe d with HDMI out put terminal and Component V ideo output terminal , it is recommended to connect to only one of the terminals.
E-18 BASIC OPERA TIONS 1 Press /I to the ON st ate. The power lamp lights up. (See P . E-7.) 2 Press . The power is turned on, and the power lamp cha nges from “Red” to “Green.” Select the V ideo, RGB, or TV mode to enable ordinary operation.
E-19 English W A TCHING TV , VIDEO, OR PICTURES ON PC Select the TV mode to wa tch analog TV broadcasts (A TV) and digital terrestr ial TV broadcasts (DTV). 1 Press " . Each time this button is pr essed, analog TV and digital terrestrial TV are switched to each othe r .
E-20 W A TCHING DIGIT AL TERRESTRIAL TV Displays digital terrest rial TV broadcasts. 1 Press " . Select digita l terrestrial TV broadcast (DTV ). When “DTV” was disp layed at the top right side of the screen, it is di gital te rrestrial TV broadcast.
E-21 English Deutsch Espa ñol Fran ç ais Italiano Portugu ê s 日 本 語 Póññêèé 中文 Digital terrestria l TV teletext or subtitle can be wa tched. 1 Press L . Press c or d to select the Stream T ype. Press a or b to switch the displayed Language.
E-22 W A TCHING ANALOG TV Selects and displays analog broadcast. 1 Press " . Selects analog TV (A TV). An alog broadcast is indicated by “A” at the beginning of the channel No. displayed when the broadcast was switched. 2 Switch to the channel you want to watch.
E-23 English OTHER BASIC OPERA TIONS When the NIGHT mode is used when watching TV , even low volume sounds can be heard clearly . This function is convenient when watching TV at night. Press , . Each time this button is pressed, the settin g changes as follows.
E-24 OTHER BASIC OPERA TIONS (Continued) Normal Displaying normal si ze picture (i.e. a 4 :3 aspect ratio). Wide1 • V ideo mode (SD signal) Displays natural-looking pictures of normal size on the wide screen. • V ideo mode (HD signal) Displays W ide size (16:9 aspect ratio) pictures.
E-25 English Deutsch Espa ñol Fran ç ais Italiano Portugu ê s 日 本 語 Póññêèé 中文 ADJUSTMENT MENU The numbers in parentheses ( ) i ndicate the refere nce page numbers.
E-26 BASIC PROCEDURES OF ADJUSTMENT MENU • Shown below is the basic procedure used to change the options on the ADJUSTMENT ME NU. (Ex.: Adjusting tint setting (T int)) • Selec ting the adjustment mode for adjustment or setting. (The items to be adj usted or set are stored for each adjustment mode.
E-27 English ADJUSTING T O A DESIRED PICTURE (PICTURE MENU) • Picture -related items can be set and adjuste d in the Picture Adjustment Screen. See BASIC PROCEDURES OF ADJUSTMENT MENU on P . E-26 for the basic procedures. Press d to increase the input signal contrast.
E-28 ADJUSTING T O A DESIRED PICTUR E (PICTURE MENU) (Co ntinued) Even more advanced picture qua lity adjustments can be made as required. Press d to strengthen the reproduc tion of black. (Provides a picture qualit y with deep blacks.) Press c to weaken the reproduction of black.
E-29 English Deutsch Espa ñol Fran ç ais Italiano Portugu ê s 日 本 語 Póññêèé 中文 This enables correc tion with respect to specific color hues within the image. Independent correction of the hue of skin colors, blue skies, and so on, enables a more brillian t display .
E-30 ADJUSTING T O A DESIRED PICTUR E (PICTURE MENU) (Co ntinued) • Jaggies Filter This function alleviates the phenomenon where jagged diagonal lines can be seen wh en interlace signals are input, thus enabling a smoother motion picture display . Each time c or d is pressed, the setting is switched.
E-31 English Deutsch Espa ñol Fran ç ais Italiano Portugu ê s 日 本 語 Póññêèé 中文 Improves color smearing, blurring, and dot noise when watching P AL signal TV and V ideo. Set to OFF when the image is unnatura l. < On < Off < [On] : Enable 3D Y/ C separation [Off] : Disable 3D Y/C separation Press Z to store.
E-32 ADJUSTING T O DESIRED AUDIO (AUDIO MENU) • Y ou can make changes to all a udio adjustment options in the AUDIO Menu. See P . E-26 for the basic procedures. • The changes you make will be stored for the selected input mode. Therefore, you need to select a desir ed input mode before making any changes.
E-33 English ADJUSTING SCREEN POSITION A ND SIZE (POSI TION/SIZE MENU) • Y ou can make changes to all scre en adjustment options in the POSITION/SIZE Menu. • See P . E-26 for the basic procedures. • The changes you make will be stored for the selected input mode.
E-34 OTHER SETTINGS (FEA TURES MENU) FEA TURES setup screen has the following 4 options. See Page E-26 for the basic procedures. [Adjustment] : Can make a fine adjustment of pictur es such as Dot Clock, Clamp Position. [On Screen Menu] : Can make a display setti ng such as OSD, Language.
E-35 English Deutsch Espa ñol Fran ç ais Italiano Portugu ê s 日 本 語 Póññêèé 中文 Y ou can change the settings for indications for RGB inputs and video inputs. RGB input Y ou can change the settings fo r indications for the RGB inputs.
E-36 OTHER SETTINGS (FEA TURES MENU) (Continued) (1) Y ou can make to the standby state automatically when the no signal state conti nued during set up time. Press a or b to select the “T ime”. Press c or d to select the amount of time before the standby state starts.
E-37 English Deutsch Espa ñol Fran ç ais Italiano Portugu ê s 日 本 語 Póññêèé 中文 Y ou can use this option to sw itch the setting for RGB input signal.
E-38 INITIALIZA TION OF USER ADJUSTMENT V ALUE Y ou can restore the values of the adjustment/setting made in the MENU to factory settings. 1 Press Y . The main menu screen will appea r . 2 Press a or b to select “Display Menu” and press d or Z . 3 Press a or b to select “F ACTOR Y DEF AUL T” and press d or Z .
E-39 English ANALOG TV MODE SETTING (TV MENU) • The setting shown below is the setting for analog TV broadcasts. First, press " and select the analog TV mode. (See P . E-22.) 1 Press Y . The “TV Menu” will appear . 2 Press a or b to select “TV Menu” and press d or Z .
E-40 DIGIT AL TV MODE SETTING (TV MENU) The setting shown below is the setting for terrestria l DTV broadcasts. First, press " and select the terrestrial TV mode. (See P . E-20.) 1 Press Y . The “TV Menu” will appear . 2 Press a or b to select “TV Menu” and press d or Z .
E-41 English Deutsch Espa ñol Fran ç ais Italiano Portugu ê s 日 本 語 Póññêèé 中文 a or b to select the channel and press 1 (Fav), 2 (Lock), 3 (Delete) on the remote control. The password input screen is displayed. When this screen is displaye d, input the password.
E-42 DIGIT AL TV MODE SETTING (TV MENU) (Continued) •T i m e M o d e It is switched each time c or d is pressed. Auto < Manual Normally use at Auto. • UTC Offset UTC Offs et becomes ef fective when “Manual” was selected by T ime Mode. This function is used when the received TV br oadcast setup time is in the UTC mode.
E-43 English Deutsch Espa ñol Fran ç ais Italiano Portugu ê s 日 本 語 Póññêèé 中文 Digital terrestr ial TV images a nd sounds can be outpu t to an external connected devi ce at the set time. Digital terrestrial TV signals are co nverted to anal og signals and output (SCAR T : V ideo).
E-44 OPTIONS * When installing an option, make sur e that all installation requirements for that option (as given in the relevant instruction manual) are me t. * The colors of options do not ma tch the display colors perfec tly . * T o improve the function and perfo rmance of optional acce ssories, specifications and part na mes may change.
E-45 English Deutsch Espa ñol Fran ç ais Italiano Portugu ê s 日 本 語 Póññêèé 中文 MAIN SUPPORTED SIGNALS The display can store up to four types of signals for RGB adjust ment values. The display uses th e first-in, first-out method; t herefore, the first input signal is cleared when the fifth one is input.
E-46 CLEANING Precaution s Be sure to remove the power plug from the receptacle before cl eaning the dis play . Be sure not to clean the display using a cl oth dampened with volatile solv ents, such as benzene or thinner . Such solvents can harm the display’ s cabinet, the filter at the sc reen front, and the remote control.
E-47 English Deutsch Espa ñol Fran ç ais Italiano Portugu ê s 日 本 語 Póññêèé 中文 MAINTENANCE If yoIn the event of problems with the display , check the following explanations before cont acting your dealer for servicing. Problem Action • Power does not turn ON.
E-48 SPECIFICA TIONS WIDE DISPLA Y Regulation • CE Safety: EN60065 EMC: EN55013 (CISPR13) EN55020 (CISPR20) EN55022 (CISPR22) EN55024 (CISPR24) EN61000-3-2 EN61000-3-3 Model P37FT05AEB P65FT00AEB T ype Liquid crystal display panel Plasma display panel Screen size 37” wide screen: 81.
Ein wichtiger Punkt beim Kauf des Geräts Fujitsu P65FT00AEB (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fujitsu P65FT00AEB noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fujitsu P65FT00AEB - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fujitsu P65FT00AEB reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fujitsu P65FT00AEB erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fujitsu P65FT00AEB besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fujitsu P65FT00AEB verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fujitsu P65FT00AEB. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fujitsu P65FT00AEB gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
