Benutzeranleitung / Produktwartung fi-4530C des Produzenten Fujitsu
Zur Seite of 27
f i-4 530C Ima g e Scanner P3 PC-E 56 7- 0 1EN Getting Started.
fi-4530C Image Scanner Getting Started i CONTENTS ■ Regulatory Informatio n .......................... .............................. ii ■ Note, Liability .................. .............................. ....................... iv ■ Safety Precautions .
ii INTRODUCTION Thank you for purchasing the fi-453 0C Duplex Color Scanner product. This document describ es how to handle fi-4530C Duplex Color and basic operation methods. Before yo u start using fi4530C Duplex Color be sure to thoroughly read this manual to ensure correct use.
fi-4530C Image Scanner Getting Started iii International E NERGY S TAR ® Program As an E NERGY S TA R ® Partner , PFU LIMITED has determined that this product meets the E NERGY S TA R ® guidelines for ener gy efficienc y .
iv Manufacturer PFU LIMITED Image Products Sales Dept., Imaging Products Division, Produ cts Group Solid Square East T ower , 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563, Japan Phone :.
fi-4530C Image Scanner Getting Started v ■ Safety Precautions Do not damage the AC cable. Use only specifie d AC cables and connector cables Use this scanner only at the indicated power vo ltage. Do not connect to multiple-power strips. Do not touch the AC cable with wet hands.
vi Do not install the scanner on unstable surfaces. Do not block the ventilation ports. Do not place heavy objects or climb on top of the scanner. Firmly insert the power plug. Avoid any contact wh en scanner is in use. Do not use the sc anner immediately after moving it from a cold place into a warm room.
fi-4530C Image Scanner Getting Started 1 Chapter1 PREP ARING THE SCANNER 1.1 Checking the Contents of the Scanner Package When you unpack the scanner package, make su re that the packa ge contains all th e pa rts on the list included in the package . If any parts are missing or defective, contact your sales representative.
2 . *) About the settings on the launcher, refer to FUJITSU TWAIN32 scanner driver h elp and the "fi-4530 C Operator’s Guid e" on the Setup CD -ROM. ■ Indications on the Function No. display The following shows the indications on the Fu nction No.
fi-4530C Image Scanner Getting Started 3 Chapter2 INST ALLA TION OF THE SCANNER 2.1 Installing the Scanner 1. Place the scanner at its installation site. For details on the scanner's dimensions and required installation sp ace, refer to "fi-4530C Operator’s Guide" "7.
4 2. Connect the other end of the USB interface cable to your PC. 3. Press down the power button on the operator panel to turn on the scanner. 4. Turn on your PC. ■ Connecting the SCSI Interface Cable When using the scanner with the SCSI interface, you need to purchase a commercially available SCSI cable and a SCSI card .
fi-4530C Image Scanner Getting Started 5 3. Press the power b utton to turn ON the scanner. When the scanner is turned O N, the SCSI ID set at step 2 is enabled.
6 3. Insert the Setup CD-ROM into the CD drive. ⇒ <SETUP DISK START UP SCREEN> appears. 4. Click [INSTALL PRODUCTS]. 5. Click [TWAIN Driver] on the window below. 6. Select a language used for installa tion on [Choose Setup Language] window and click [OK].
fi-4530C Image Scanner Getting Started 7 Now the installation of the scanner driver is completed. ■ Installing ScandAll 21 "Scandall 21" is image capturi ng software that complies with the TWAIN standard. With the FUJITSU TWAIN 32 scanner driver, you can capture images by using a FUJITSU image scanner fi-series product.
8 6. When the [InstallShield Wizard Complete] win - dow appears, click [Finish] ■ Confirming Installation 1. Set documents on the ADF paper chute. For details on how to set documents, refer to the "1.2 Loading Documents on the ADF for Scan- ning" in the fi-4530 Operat or’s Guide provided in the CD-ROM.
fi-4530C Image Scanner Getting Started 9 7. Documents are scanned, and the scanned images are displayed on the [ScandAll 21] win- dow. If the scanning is complete d without any troubles, the installation was performed successfully. For details on various ty pes of scanning, refer to the "fi-4530C Operator’s Guide" on the Setup CD-ROM.
10 4. Click [INSTALL PRODUCTS]. 5. Click [ISIS Driver] on the window below. 6. Select a language used for installation on [Choose Setup Language] window and click [OK]. 7. Install the application following the instructions on the window. 8. When the [InstallShield Wiizard Complete] win- dow appears, click [Finish].
fi-4530C Image Scanner Getting Started 11 2. Click [INSTALL PRODUCTS] . 3. Click [QuickScan PRO (Trial)] on the window below. 4. Install the application following the in structions on the window. 5. Enter required information, then click [Next >] button.
12 3. Select [Preview Settings...] from the [Scan] menu. Set the scan resolution, paper size and other scanning conditions, and then click [OK]. 4. Load the documents on the scanner. For details on loading do cuments, refer to "1.2 Loading Documents on the ADF for Scanning" in the fi-4530C Operator's Guide on the Setup CD- ROM .
fi-4530C Image Scanner Getting Started 13 4. Select a language used for insta llation on [Choose Setup Languag e] window and click [OK]. 5. Install the application following the in structions on the window. 6. When the [InstallShield Wiizard Complete] win - dow appears, click [Finish].
14 3. The following window appears. Click the [Acro- bat 5.0] button, then click the [Install Adobe Acrobat 5.0] button shown below. ⇒ The Setup window a ppears and the insta llation will be start ed. 4. The setup window appears. Install Adobe Acro- bat following the instructions on th e window.
fi-4530C Image Scanner Getting Started AP-1 Appendix1 TROUBLESHOOTING ■ Troubleshooting checklist Symptom Check this item Remedy Scanner does no t turn on. H ave you pushed the power bu tton? Push the power button. Are the AC cable and AC ada pter properly connected to the scanner? Correctly connect the AC cabl e and the AC adapter .
AP-2 Double-feed frequen tly occurs. Do the documents qualify the "Docu- ment Quality" a nd the "Doubl e-feed Detection Conditions" in the cha pter 6 of the fi-4530C Operator’s G.
fi-4530C Image Scanner Getting Started AP-3 ■ Temporary error The following shows the procedure for releasing of each temporary error. • "U1" error Remove jammed documents. Confirm that the documents meet the paper condi- tions for scanning.
AP-4 Appendix2 DAILY CARE ■ Cleaning Materials For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchas ed the scan- ner. ■ Cleaning Method The ADF must be cleaned with a lint-free cloth moist- ened with the Cleaner F1.
fi-4530C Image Scanner Getting Started AP-5 Appendix3 REPLACING CONSUMABLES ■ Consumables and Replacement Cycle The following table show s the specifications of consumables and guidelines for the replacement cycle. For purchase of consumables, contact the store where you purchased t he scanner or an authorized FUJITSU scanner service provider.
This Manual uses recycled paper ..
Ein wichtiger Punkt beim Kauf des Geräts Fujitsu fi-4530C (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fujitsu fi-4530C noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fujitsu fi-4530C - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fujitsu fi-4530C reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fujitsu fi-4530C erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fujitsu fi-4530C besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fujitsu fi-4530C verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fujitsu fi-4530C. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fujitsu fi-4530C gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
