Benutzeranleitung / Produktwartung CELSIUS R570 des Produzenten Fujitsu
Zur Seite of 94
CELSIUS M4xx / R5xx / R6xx Operating Manual.
Are there ... ... any technical problems or other questions you w ould like to discuss? Please contact: ● our Hotline/Help Desk (see the enclosed Help Desk list or go to http://ts.
.
Published by Fujitsu T echnology Solutions GmbH A26361-K994-Z220-1-7619, Edition 2 2009/0 8 Produced by XEROX Global Services.
CELSIUS M4xx / R5xx / R6xx Operating Manual Introduction Important notes Preparing for use Operation Troubleshooting and tips System expansions Technical data Index Edition: August 2009.
CELSIUS is a registered trademark of Fujitsu Technology Solutions GmbH. Windows XP, Windows Vista, Windows 7 are registered trademarks of the Microsoft Corporation. PS/2 is a registered trademark of Inte rnational Business Machines, Inc. Pentium is a registered trademark of Intel Corporation, USA.
A26361-K994-Z220-1-7619, Edition 1 Contents Your CELSIUS... .................................................................................................................................. 1 Notational conventions ...................................
Contents A26361-K994-Z220-1-7619, Edition 2 System upgrades ................................................................................................................ .............. 31 Information about boards ...................................
A26361-K994-Z220-1-7619, Edition 2 1 Your CELSIUS... ... is available with various c onfiguration levels with different hardware and software. Y ou can incorporate operable drives (for exampl e DVD drive) as well as other boards. This manual tells you how to put y our device into operation and how to operate it in daily use.
Your CELSIUS... 2 A26361-K994-Z220-1-7619, Edition 2 Notational conventions The following symbols are used in this manual: ! indicates information which is import ant for your health or for preventing physical damage. i indicates important information which is required to use the system properly.
A26361-K994-Z220-1-7619, Edition 2 3 Important notes In this chapter you will find information regarding sa fety which it is essential to take note of when working with your device. Safety notes ! Pay attention to the information provided in the "Safety" manual and in the follow ing safety notes.
Important notes 4 A26361-K994-Z220-1-7619, Edition 2 Energy saving, disposal and recy cling Further information on these topics can be found on the "Drivers & Utilities" DVD.
Important notes A26361-K994-Z220-1-7619, Edition 2 5 FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products w ill appear in the accompanying documentation.
Important notes 6 A26361-K994-Z220-1-7619, Edition 2.
A26361-K994-Z220-1-7619, Edition 2 7 Preparing for use ! Please observe the safety information in the " Important notes" chapter. Unpacking and checking the delivery It is recommended not to throw away the origi nal packaging material! It may be required for reshipment at some later date.
Preparing for use 8 A26361-K994-Z220-1-7619, Edition 2 Setting up the device ! When installing your device, give consideration to the safety notes in the "Safety " manual. The device should only be set up in the intended or ientation, i.e. in a vertical position.
Preparing for use A26361-K994-Z220-1-7619, Edition 2 9 Unscrewing the base foot (CELSIUS R6xx) 1 1 2 ► Unscrew the knurled screws (1). ► Pull off the base foot in the direction of the arrow (2).
Preparing for use 10 A26361-K994-Z220-1-7619, Edition 2 Connecting external devices ! Read the documentation on the exte rnal device before connecting it. With the exception of USB devices, always remove all power plugs before connecting external devices! Do not connect or disconnect c ables during a thunderstorm.
Preparing for use A26361-K994-Z220-1-7619, Edition 2 11 Ports provided by the device The connections are located on the front and back of the device. The ports av ailable on your device depend on the configuration level you have selected. The standard ports are marked with the symbols shown below (or similar).
Preparing for use 12 A26361-K994-Z220-1-7619, Edition 2 Connecting the mouse Depending on the equipment level selected, your device will be supplied with a PS/2 mouse or a USB mouse. Connecting PS/2 mouse ► Connect the PS/2 mouse to the PS/2 mouse port of the device.
Preparing for use A26361-K994-Z220-1-7619, Edition 2 13 Connecting external devices to the serial port External devices (e.g. a printer or m odem) can be connected to the serial port. ► Connect the data cable to the external device. ► Connect the data cable to the serial port.
Preparing for use 14 A26361-K994-Z220-1-7619, Edition 2 Connecting external devices to the FireWire port External devices such as digi tal audio/video devices or other high-speed devices can be connected to the FireWire port. The FireWire port operat es at a speed of up to 400 Mbit per second.
Preparing for use A26361-K994-Z220-1-7619, Edition 2 15 Connecting the device to the mains voltage i The device is fitted with a wide voltage r ange power supply. This means y ou do not need to set the nominal voltage manually for thes e devices. Therefore there is no switch available for the voltage setting.
Preparing for use 16 A26361-K994-Z220-1-7619, Edition 2 Switching on monitor and device ► Switch the monitor on (see the operating manual for the monitor). CELSIUS M / R ► Press the ON/OFF switch on the front of the device. The power-on indicator glows white and the device is started.
A26361-K994-Z220-1-7619, Edition 2 17 Operation Switching the device on ► If necessary, switch the monitor on (s ee the operating manual for the monitor). ► Press the ON/OFF switch on the front of the device. The power-on indicator glows white and the device is started.
Operation 18 A26361-K994-Z220-1-7619, Edition 2 Indicators on the device The indicators are on the front of the casing. Wh ich indicators are available on your device depends on the configuration level you have selected. CELSIUS M / R: 3 2 1 1 = LCD-display 2 = Drive indicator, e.
Operation A26361-K994-Z220-1-7619, Edition 2 19 LAN connection Appears on the LCD as soon as the wo rkstation is connected to a LAN. LAN access Appears on the LCD as soon as the workstat ion sends or receives data over the LAN.
Operation 20 A26361-K994-Z220-1-7619, Edition 2 Keyboard 1 34 5 2 1 = Function keys 2 = Power button (optional) 3 = Alphanumeric keypad 4 = Cursor keys 5 = Numeric keypad (calculator keypad) i The illustrated keyboard is an example and may differ from the model y ou use.
Operation A26361-K994-Z220-1-7619, Edition 2 21 Menu key calls up the menu for the marked item (Windows). Shift key enables upper-case letters and the upper key symbols to be used. Al t Gr Alt Gr (e.g. German key board) produces a character shown on the right-hand side of a key (e.
Operation 22 A26361-K994-Z220-1-7619, Edition 2 Settings in BIOS Setup In BIOS Setup you can set the system functions and the hardware configuration of the device. When the PC is delivered, the default entries are va lid (see "BIOS Setup" manual or manual for the mainboard).
Operation A26361-K994-Z220-1-7619, Edition 2 23 BIOS setup security functions The Security menu in BIOS Setup offers you various options for protecting your personal data against unauthorised access, e.g.: ● Preventing unauthorised access to the BIOS Setup.
Operation 24 A26361-K994-Z220-1-7619, Edition 2 SystemLock permissions You can initialise a SmartCard with one of the following permissions: System The system starts following entry of the user PIN. Y ou can change the user PIN. Setup You can open and change the BIOS Setup and change the user PIN.
A26361-K994-Z220-1-7619, Edition 2 25 Troubleshooting and tips ! Refer to the safety notes in the "Safety" manual and in the " Preparing for use" chapter when connecting or di sconnecting cables.
Troubleshooting and tips 26 A26361-K994-Z220-1-7619, Edition 2 Power-on indicator remains unlit after you have switched on your device Cause Troubleshooting The mains voltage supply is faulty. ► Check whether the power cable is plugged properly into the device and a grounded mains outlet.
Troubleshooting and tips A26361-K994-Z220-1-7619, Edition 2 27 Screen stays blank Cause Troubleshooting Monitor is switched off. ► Switch your monitor on. Power saving has been activated (screen is blank) ► Press any key on the key board. or ► Deactivate the screen saver.
Troubleshooting and tips 28 A26361-K994-Z220-1-7619, Edition 2 Cause Troubleshooting Wrong setting for the monitor under Windows Vista ► Restart the device. ► Press F8 while the system is booting. Either the Windows Advanced Start Options menu or the menu for selecting the operating system appears.
Troubleshooting and tips A26361-K994-Z220-1-7619, Edition 2 29 No mouse pointer displayed on the screen Cause Troubleshooting The mouse is not correctly connected. ► Shut down the operating system properly . ► Schalten Sie das Gerät aus. ► Check that the mouse cable is properly connected to the system unit.
Troubleshooting and tips 30 A26361-K994-Z220-1-7619, Edition 2 Error messages on the screen Error messages and their ex planation are contained: ● in the technical manual for the mainboard ● in th.
A26361-K994-Z220-1-7619, Edition 2 31 System upgrades i The devices are very similar to each other. Therefore, often only the CELSIUS R is shown in the following illustrations. In case of differences, this will be pointed out at the appropriate point.
System upgrade s 32 A26361-K994-Z220-1-7619, Edition 2 Information about boards Take care with the locking mechanisms (catches and centring pins) when you are replacing boards or components on boards. To prevent damage to the board or the components and conductors on it, please take care when you insert or remove boards.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 33 Opening the casing i The following illustrations show the CELSIUS R. The sequence of actions is identical for all device variants and configuration levels.
System upgrade s 34 A26361-K994-Z220-1-7619, Edition 2 3 2 1 ► Turn the key in the direction of the arrow (1). ► Press the clip upwards (2). The side cover is now free from the clip and can be detached. ► Pull the side cover away from the casing (3).
System upgrade s A26361-K994-Z220-1-7619, Edition 2 35 Closing the casing i The following illustration show the CELSIUS R. The sequence of actions is identical for all device variants and configuration levels. ► Lay the device on its side on a stable, flat and clean surface.
System upgrade s 36 A26361-K994-Z220-1-7619, Edition 2 Opening the front panel i The following illustrations show the CELSIUS R. The sequence of actions is identical for all device variants and configuration levels. ► Open the casing (see “ Opening the casing”).
System upgrade s A26361-K994-Z220-1-7619, Edition 2 37 Closing the front panel 1 2 2 2 ► If necessary, hook in the hinge on the right-hand side of the front panel. ► Take care not to trap the cable of t he LCD display when closing the front panel.
System upgrade s 38 A26361-K994-Z220-1-7619, Edition 2 Removing the side fan You will need to remove the side fan inside the casi ng in order to install boards or upgrade the main memory. i The following illustrations show the CELSIUS R. The sequence of actions is identical for all device variants and configuration levels.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 39 Installing the side fan 1 2 a ► Connect the fan cable to the corresponding plug contact on the mainboard (refer also to the manual of the mainboard). ► Position the side fan at a slight angle in the dire ction of the arrow (1) and hook the fan lugs into the cutouts on the cross piece.
System upgrade s 40 A26361-K994-Z220-1-7619, Edition 2 Installing the front fan (CELSIUS M) You must install a front fan when converting the hard disks to SAS hard disks. Securing front fan on fan bracket 1 ► Lay the fan on the fan bracket in the direction of the arrow (1).
System upgrade s A26361-K994-Z220-1-7619, Edition 2 41 ► Close the front panel (see "Closing the front panel"). ► Close the casing (see " Closing the casing"). Removing the front fan (CELSIUS M) ► Open the casing (see " Opening the casing").
System upgrade s 42 A26361-K994-Z220-1-7619, Edition 2 Removing the ventilation duct (CELSIUS M) Before you can upgrade the main memory or the proc essor, or before you can replace the processor or the lithium battery, you must remove the ventilation duct and the rear fan located underneath it (see “ Removing the rear fan ”).
System upgrade s A26361-K994-Z220-1-7619, Edition 2 43 Removing the rear fan ► Remove the ventilation duct (see " Removing the ventilation duct (CELSIUS M)"). a 1 1 1 1 2 ► Press the lever (a) in the direction of the arrow until the lever unhooks.
System upgrade s 44 A26361-K994-Z220-1-7619, Edition 2 Installing the rear fan i When routing the fan cable, make sure that it cannot become kinked or trapped. When inserting the rear fan and the ventilation duct, be careful not to damage the processor cooler(s) on the mainboard.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 45 Installing the ventilation duct (CELSIUS M) a 1 2 ► Insert the ventilation duct into the casing in the direction of the arrow (1). ► Slide the ventilation duct in the directi on of the arrow (2) until the lever (a) engages.
System upgrade s 46 A26361-K994-Z220-1-7619, Edition 2 Removing the cross-piece To upgrade the main memory or replace the proc essor you will need to remove the cross-piece. i The following illustrations show the CELSIUS R. The sequence of actions is identical for all device variants and configuration levels.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 47 Installing the cross-piece 1 2 2 c b a a ► Insert the cross-piece at a slight angle into its brackets (a) on the back of the casing. ► Press the cross-piece into the casing in the direction of the arrow (1) until the lugs (b) of the cross-piece hook into the brackets (c) in the casing.
System upgrade s 48 A26361-K994-Z220-1-7619, Edition 2 Removing the memory fan (CELSIUS R) To be able to upgrade the main memory, you must remove the memory fan. ► Open the casing (see " Opening the casing"). ► Remove the side fan (see " Removing the side fan").
System upgrade s A26361-K994-Z220-1-7619, Edition 2 49 Installing the memory fan (CELSIUS R) 1 ► Insert the memory fan into the holding plate (1). Make sure that you feel the memory fan engage. ► Connect the memory fan cables on the ma inboard (see the manual for the mainboard).
System upgrade s 50 A26361-K994-Z220-1-7619, Edition 2 1 1 2 a a ► Disconnect the cables of the processor fan. ► Release the locking lugs (a) of the fan br acket in the direction of the arrow (1). ► Take the fan out of the casing (2). 1 1 1 1 2 ► Undo the screws (1).
System upgrade s A26361-K994-Z220-1-7619, Edition 2 51 Installing the heat sink with fan (CELSIUS R) 2 2 2 2 1 ► Insert the heat sink into the casing in the direction of the arrow (1). ► Fasten the screws (2). 1 a a ► Insert the fan into the casing (1).
System upgrade s 52 A26361-K994-Z220-1-7619, Edition 2 ► Install the side fan (see " Installing the side fan"). ► Close the casing (see " Closing the casing"). Removing the heat sink (CELSIUS M) To upgrade the main memory or replace the processor you w ill need to remove the heat sink.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 53 Installing the heat sink (CELSIUS M) 2 2 2 2 1 ► Insert the heat sink into the casing in the direction of the arrow (1). ► Fasten the screws (2). ► Install the cross-piece (see " Installing the cross-piece").
System upgrade s 54 A26361-K994-Z220-1-7619, Edition 2 Installing a short board ► Open the casing (see " Opening the casing"). ► Remove the fan (see " Removing the side fan"). ► Remove the cross-piece if it is in the way (see " Removing the cross-piece ”).
System upgrade s A26361-K994-Z220-1-7619, Edition 2 55 1 ► Push the board into the slot (1). ► Press the board into the slot so that it engages. ► If necessary, connect the cables. 3 2 2 a ► Press the clips (2) from outside in the cut-outs on the case rear panel until the clips engage.
System upgrade s 56 A26361-K994-Z220-1-7619, Edition 2 i If you have installed or removed a PCI board, pl ease check the relevant PCI slot settings in the BIOS Setup . If necessary, change the settings. Further information is provided in the PCI board documentation.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 57 1 a ► Push the slot cover into the slot (1). ! Ensure that the projection (a) on the slot cover engages into the appropriate recess. If it does not, you will find it difficult to close the locking rail.
System upgrade s 58 A26361-K994-Z220-1-7619, Edition 2 ► Close the casing (see "Closing the casing"). i If you have installed or removed a PCI board, please check the relevant PCI slot settings in the BIOS Setup . If necessary, change the settings.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 59 2 1 1 1 1 2 a ► Push the board into the slot (1) and into the board holder (2). ► Press the board into the slot so that the board is felt to engage and on graphic cards the lever (a) on the board closes (2).
System upgrade s 60 A26361-K994-Z220-1-7619, Edition 2 Removing a long board ► Open the casing (see " Opening the casing"). ► Remove the fan (see " Removing the side fan"). ► Remove the cross-piece if it is in the way (see " Removing the cross-piece").
System upgrade s A26361-K994-Z220-1-7619, Edition 2 61 1 2 a ► At the same time release the board from the board holder (a) by pressing the clip on the board holder in the direction of the arrow (1) and pulling the board in the direction of the arrow (2).
System upgrade s 62 A26361-K994-Z220-1-7619, Edition 2 1 a ► Push the slot cover into the slot (1). ! Ensure that the projection (a) on the slot cover engages into the appropriate recess. If it does not, you will find it difficult to close the locking rail.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 63 Low-profile boards For units with a particularly low overall height, there are so-called low- profile boards with a slot cover with a lower overall height to match the low-profile units.
System upgrade s 64 A26361-K994-Z220-1-7619, Edition 2 Installing and removing drives The casing can accommodate a total of seven drives: ● three accessible drives (two 5¼ inch drives and one 3½ i.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 65 Removing an accessible 5¼ inch drive i The following illustrations show the CELSIUS R. The sequence of actions is identical for all device variants and configuration levels. ► Open the casing (see " Opening the casing").
System upgrade s 66 A26361-K994-Z220-1-7619, Edition 2 1 2 2 ► If you are not installing a new drive, slide the empty slide-in insert into the casing until it noticeably engages. ► Secure the empty slide-in module with the screws (2). ► Close the casing (see " Closing the casing").
System upgrade s A26361-K994-Z220-1-7619, Edition 2 67 Installing an accessible 5¼ inch drive ► Open the casing (see " Opening the casing"). 1 1 2 ► If a Weight Saver is present, remove this first: Remove the screws (1) and pull the Weight Saver out of the casing (2).
System upgrade s 68 A26361-K994-Z220-1-7619, Edition 2 1 2 2 ► Slide the accessible drive into the casing as far as the stop (1). ► Fasten the drive into place with the screws (2). ► Plug the data and the power supply connectors into the drive. Make sure the polarity is correct.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 69 Removing and installing a 3 ½ inch drive (e.g. MultiCard reader) i A carrier is needed to install a 3½ inch drive in a 5 ¼ inch bay. When this carrier is used, the 3½ inch drive can be installed in the 5¼ inch bay instead of the Weight Saver or a 5¼ inch drive.
System upgrade s 70 A26361-K994-Z220-1-7619, Edition 2 Installing an accessible 3½ inch drive ► Take the new 3½ inch drive out of its packaging. 2 2 ► Slide the 3½ inch drive into the carrier (1). ► Secure the 3½ inch drive on both sides of the carrier using the screws (2).
System upgrade s A26361-K994-Z220-1-7619, Edition 2 71 Installing and removing a hard disk drive i The following illustrations show the CELSIUS R. The sequence of actions is identical for all device variants and configuration levels. Installing a hard disk drive ► Open the casing (see " Opening the casing").
System upgrade s 72 A26361-K994-Z220-1-7619, Edition 2 Removing a hard disk drive ► Open the casing (see " Opening the casing"). 2 1 1 ► Press the EasyChange rails in the direction of the arrows (1). ► Pull the hard disk drive out of the carrier (2).
System upgrade s A26361-K994-Z220-1-7619, Edition 2 73 Installing and removing a SmartCard reader (optional) i You can operate a maximum of 2 internal USB components in your device. An adapter cable (available as an option) will be needed fo r the second internal USB component (e.
System upgrade s 74 A26361-K994-Z220-1-7619, Edition 2 ► Side the carrier with SmartCard reader into the module for the SmartCard reader (1). ► Fasten the carrier with the screws (2) on both sides of the slide-in module.
System upgrade s A26361-K994-Z220-1-7619, Edition 2 75 Installing and removing a WLAN module (optional) i You can install a WLAN module in your device. The following illustrations show the CELSIUS R. The sequence of actions is identical for all device variants and configuration levels.
System upgrade s 76 A26361-K994-Z220-1-7619, Edition 2 Installing WLAN module 1 2 2 ► Slide the WLAN module into the slot on the front of the casing in the direction of the arrow (1). Make sure that the screw holes for the screws are aligned. ► Fasten the WLAN module with the screws (2).
System upgrade s A26361-K994-Z220-1-7619, Edition 2 77 i More detailed information on the use of Wire less LAN can be found in the "Wireless LAN" manual. This manual is provided as PDF file on the "Drivers & Utilities" DVD. Removing WLAN module ► Open the casing (see " Opening the casing").
System upgrade s 78 A26361-K994-Z220-1-7619, Edition 2 Extensions to the mainboard Details on how you can upgrade the main memory or the processor of your device are provided in the manual for the mainboard. Upgrading main memory (CELSIUS R) ► Open the casing (see " Opening the casing").
System upgrade s A26361-K994-Z220-1-7619, Edition 2 79 Replacing the processor ► Open the casing (see " Opening the casing"). ► Remove the ventilation duct (see " Removing the ventilation duct (CELSIUS M)"). ► Remove the side fan (see " Removing the side fan").
System upgrade s 80 A26361-K994-Z220-1-7619, Edition 2 Changing lithium battery In order to permanently save the system informati on, a lithium battery is installed to provide the CMOS-memory with a current. A corresponding erro r message notifies the user when the charge is too low or the battery is empty .
Technical data A26361-K994-Z220-1-7619, Edition 2 81 Technical data Electrical data Regulations complied with: EN 60950 UL 60950 CSA 22.2 No.950 Protection class: I Rated voltage range: 100 V - 240 V Rated frequency: 50 Hz - 60 Hz 100 V – 127 V : 6 A 200 V – 240 V : 3 A Max.
Technical data 82 A26361-K994-Z220-1-7619, Edition 2 i The data sheets of these devices contains further technical data. You will find the data sheets on the internet at http://ts.
A26361-K994-Z220-1-7619, Edition 2 83 Index 3 3 1/2-inch drive 64 3½ inch installing 70 removing 69 5 5 1/4-inch drive 64 A Access permission, SmartCard 23 Accessible drive installing 67 removing 65 .
Index 84 A26361-K994-Z220-1-7619, Edition 2 E Electromagnetic compatibility 4 EMC, Electromagnetic compatibility 63 Energy saving 4 Ergonomic, video workstation 8 Error date 29 device 26 mouse 29 scre.
Index A26361-K994-Z220-1-7619, Edition 2 85 Mouse port 11 N New installation, software 30 Notational conventions 2 Note boards 32 Notes CE mark 4 disposal 4 energy saving 4 important 3 recycling 4 saf.
Index 86 A26361-K994-Z220-1-7619, Edition 2 U USB Universal Serial Bus 11 USB devices connecting 13 USB port 12 connecting devices 13 connecting keyboard 12 connecting mouse 12 V Ventilation 8 Video d.
Ein wichtiger Punkt beim Kauf des Geräts Fujitsu CELSIUS R570 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fujitsu CELSIUS R570 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fujitsu CELSIUS R570 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fujitsu CELSIUS R570 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fujitsu CELSIUS R570 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fujitsu CELSIUS R570 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fujitsu CELSIUS R570 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fujitsu CELSIUS R570. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fujitsu CELSIUS R570 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.