Benutzeranleitung / Produktwartung FinePix F470 des Produzenten FujiFilm
Zur Seite of 61
BL00533-200 ( 1 ) This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix F470 correctly. Please follow the instructions carefully. OWNER’S MANUAL 1 2 3 4 5 6 Getting Ready Setting.
2 3 W arning IMPORT ANT Be sure to read this page before using the Software. For customers in the U.S.A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with part 15 of the FCC Rules.
4 5 1 2 3 4 5 6 Contents Warning ......................................................................... 2 IMPORTANT ................................................................. 2 EC Declaration of Conformity ...................................
6 7 Preface ■ Test Shots Prior to Photography For important photographs (such as weddings and overseas trips), always take a test shot and view the image to make sure that the camera is working normally.
8 9 PUSH TO EJECT Shutter button Self-timer lamp (P .39) Lens (lens cover) Speaker Indicator lamp (P .23) Microphone (Playback) button W (Wide zoom ) button (P .20, 21) Flash (P .37) DISP (Display) / BACK button (P .20, 25, 27) Battery cover (P .1 1) MENU/OK button (P .
10 11 Getting Ready 1 CHARGING THE BA TTERY 1 Getting Ready LOADING THE BA TTERY AND THE xD-Picture Card Compatible battery h Rechargeable Battery NP-40N (1) ● ! Do not stick labels onto the battery as this could cause the battery to become jammed inside the camera.
12 13 Getting Ready 1 12 LOADING THE BA TTERY AND THE xD-Picture Card 4 Close the battery cover. ◆ How to replace the xD-Picture Card ◆ Push the xD-Picture Card into the slot and then slowly remove your finger. The lock is released and the xD-Picture Card is pushed out.
14 15 Getting Ready 1 TURNING ON AND OFF Move to Photography mode or Playback mode Press the “ w ” button during shooting to change to Playback mode. Press the “ w ” button again to return to Photography mode. Photography b a Playback Press the “ w ” button for about 1 second to turn the camera on in Playback mode.
0 1 0 2 2008 2007 2005 2004 YY .MM.DD Y Y. M M . D D 2006 0 0 0 1 : 4 2 2 . AM A M DA TE/TIME D A T E / T I M E SET S E T CANCEL C A N C E L 0 1 0 2 0 3 DA TE/TIME D A T E / T I M E 2006 2/ / 24 0 10 0 A M YY Y Y .MM.DD . M M . D D DD .MM.YY D D . M M .
19 Using the Camera 2 18 SELECTING THE LANGUAGE 1 1 Press the “MENU/OK” button to display the menu on the LCD monitor. 2 Press “ a ” or “ b ” to select “ ˜ ” SET-UP. 0 1 0 2 ● ! The screens in this manual are shown in English. ● ! See P.
20 21 Using the Camera 2 20 BASIC OPERA TION GUIDE 1 0 1 0 2 1 Press the “POWER” button down fully to turn the camera on. 2 Set the Mode switch to “ B ”. h Focal range Approx. 70 cm (2.3 ft.) to infinity 2 Brace your elbows against your sides and hold the camera with both hands.
22 23 Using the Camera 2 Bebeep ● ! The image shown on the LCD monitor before the picture is taken may differ in brightness, color, etc. from the image actually recorded. Play back the recorded image to check it ( ➡ P.26). Use the LCD monitor to frame the shot so that the subject fills the entire AF (Autofocus) frame.
24 25 Using the Camera 2 Click Bebeep USING AF/AE LOCK Move the camera slightly so that one of the subjects is in the AF frame. 2 Press the shutter button down halfway (AF/AE lock). When a short double-beep is heard, the camera focuses on your subject.
26 27 Using the Camera 2 1 VIEWING THE IMAGES ( w PLA YBACK ) PLAYBACK MODE Multi-frame playback In Playback mode, press the “DISP/BACK” button to change the display shown on the LCD monitor. Press the “DISP/BACK” button until the multi-frame playback screen (9 frames) appears.
28 29 Using the Camera 2 28 Press “ a ”, “ b ”, “ d ” or “ c ” to move the cursor (colored frame) to the selecting frame. 200 200 6 1/4 1 / 4 2/22 2/23 2/24 6 Press the “MENU/OK” button to enlarge the selected image.
31 Using the Camera 2 30 30 1 2 Press “ d ” or “ c ” to select the erasing frame (file). 2 / 2 4 / 2 0 0 6 1 0 : 0 0 A M 2/24/2006 10:00 AM 100-0009 100-0009 200 200 200 : : : : : : : : 3 3 2 2 N N Press the “ w ” button for about 1 second to turn the camera on in Playback mode.
32 33 Advanced Features 3 Specify the camera settings for taking pictures to get the best result. A general guide is given below. 1 Select the Photography mode ( ➡ P. 34, 35). B Auto Specifies all settings other than Quality, Sensitivity and FinePix COLOR on the camera.
34 35 Advanced Features 3 SHOO TING MODE S H O O T I N G M O D E SET S E T OFF OFF : : : 2 1 1 Press the “MENU/OK” button to display the menu on the LCD monitor. 2 Press “ a ” or “ b ” to select “ ˇ ” SHOOTING MODE. 0 1 0 2 PORTRAIT PORTRAIT SET S E T OFF O F F : : : 3 1 Press “ c ”.
N 10 36 37 Advanced Features 3 e MACRO ( CLOSE-UP ) PHOTOGRAPHY FUNCTIONS N 10 Select Macro mode to take close-up shots. 1 Set the Mode switch to Photography mode. 2 Press the “ e ( d )” button. The “ e ” appears on the LCD monitor indicating that you can take close-up shots.
38 39 Advanced Features 3 d FLASH PHOTOGRAPHY PHOTOGRAPHY FUNCTIONS d Forced flash Use this mode in backlit scenes, such as a subject against a window or in the shade of a tree, or to get the correct colors when taking a picture under bright lighting.
40 41 Advanced Features 3 This is useful when checking the shot composition for dimly lit scenes (Slow synchro shots, etc.). 1 Set the Mode switch to Photography mode. Press the “ fi ( a )” button. “” appears on the LCD monitor and the subject is displayed brightly.
43 Advanced Features 3 42 AU TO A U T O 400 200 200 100 64 N : : : AU TO A U T O STD S T D 1 Set the Mode switch to Photography mode. 2 Press the “ p ” button to display the menu on the LCD monitor. 1 Press “ a ” or “ b ” to select “ û ” (sensitivity).
45 Advanced Features 3 44 INCANDESCENT I N C A N D E S C E N T :AUTO : A U T O SET SET OFF O F F : : : : 0 ● ! The settings available in the menu screen vary depending on the Photography mode. 1 Press the “MENU/OK” button to display the menu on the LCD monitor.
47 Advanced Features 3 46 SETTING PHOTOGRAPHY MENU PHOTOGRAPHY MENU ˇ Shooting mode ➡ P.34 Specify “ m ” PORTRAIT, “ , ” LANDSCAPE, “ . ” SPORT, “ © ” NIGHT, “ Ü ” BEACH & SNOW, “ Ö ” SUNSET, “ ÿ ” MUSEUM, “ Ÿ ” PARTY, “ Ù ” FLOWER CLOSE-UP, “ Õ ” TEXT or “ s ” MANUAL.
49 Advanced Features 3 ERASE FRAME E R A S E F R A M E FRAME F R A M E ALL FRAMES A L L F R A M E S 1 2 1 Press the “ w ” button to turn the camera on in Playback mode. 2 Press the “MENU/OK” button to display the menu on the LCD monitor. 2 1 Press “ a ” or “ b ” to select “ Ò ” ERASE.
51 Advanced Features 3 IMAGE R O T A TE I M A G E R O T A T E SET S E T 1 2 0 1 0 2 0 1 0 2 2 1 Press “ a ” or “ b ” to select “ Ú ” IMAGE ROTATE. 2 Press “ c ”. 3 1 Press “ a ” or “ b ” to rotate and display the image. 2 Press “MENU/OK” button to confirm your selection.
53 Advanced Features 3 1 1 Press the “ w ” button to turn the camera on in Playback mode. 2 Press the “ p ” button. “WITH DATE” is selected at factory default setting. See P.55 for information on selecting “WITH DATE” or “WITHOUT DATE”.
55 Advanced Features 3 WITH DA TE W I T H D A T E WITHOUT DA TE W I T H O U T D A T E RESET ALL R E S E T A L L WITH DA TE W I T H D A T E 1 2 1 1 Press the “ w ” button to turn the camera on in Playback mode. 2 Press the “MENU/OK” button to display the menu on the LCD monitor.
57 Advanced Features 3 3 1 Press “ a ” or “ b ” to select “RESET ALL”. 2 Press the “MENU/OK” button. RESET ALL R E S E T A L L WITHOUT DA TE W I T H O U T D A T E RESET ALL R E S E T A.
59 Advanced Features 3 1 Press “ d ” or “ c ” to select the protected frame (file). 2 Press the “MENU/OK” button to unprotect the displayed frame (file). FRAME RESET Press the “MENU/OK” button to protect all the frames (files). SET ALL Press the “MENU/OK” button to unprotect all the frames (files).
61 Advanced Features 3 REC ST ANDBY R E C S T A N D B Y 30 3 0 s ST ART S T A R T CANCEL C A N C E L 4 “REC STANDBY” appears on the LCD monitor. Press the “MENU/OK” button to begin recording. Face the microphone on the front of the camera to record your comment.
63 Advanced Features 3 15 1 5 s ST OP S T O P PA U S E PA U S E Bar PLA Y P L A Y 1 1 Press the “ w ” button to turn the camera on in Playback mode. 2 Press “ d ” or “ c ” to select an image file that has a voice memo. 2 1 Press “ b ” to play the voice memo.
65 Advanced Features 3 1 Press the “ w ” button to turn the camera on in Playback mode. 2 Press “ d ” or “ c ” to select the trimming frame (file). 1 0 1 0 2 1 Press the “MENU/OK” button to display the menu on the LCD monitor. 2 Press “ a ” or “ b ” to select “ ¯ ” TRIMMING.
67 Advanced Features 3 SET S E T CANCEL C A N C E L ALL FRAMES A L L F R A M E S FRAME F R A M E COPY FRAME C O P Y F R A M E COPY C O P Y It is possible to transfer saved images between the internal memory and an xD-Picture Card . 1 Press the “ w ” button to turn the camera on in Playback mode.
69 Advanced Features 3 3 14 s s ST ANDBY S T A N D B Y Zoom bar Press the “ T ” or “ W ” button to zoom in or out before recording. You must zoom beforehand as you cannot zoom during recording. h Optical zoom focal length (35 mm camera equivalent) Approx.
71 Advanced Features 3 70 % (640 × 480) $ (320 × 240) Quality mode Sample uses For better quality To record longer movies 640 640 x 480 480 : 1 4 s : 3 1 Press “ a ” or “ b ” to change the setting. 2 Press the “MENU/OK” button to confirm the setting.
73 Advanced Features 3 72 Adjusting volume of movies SET SET CANCEL C A N C E L 1 0 2 3 4 6 5 8 9 10 1 0 7 1 Press the “MENU/OK” button while playing back movie. The movie is paused during playback. 1 1 0 2 3 4 6 5 7 9 10 1 0 8 SET SET CANCEL C A N C E L 2 Press “ d ” or “ c ” to adjust the volume.
75 Settings 4 74 DSC D S C ENGLISH E N G L I S H OK O K NTSC N T S C : : : : 1 3 2 5 0 1 0 2 1 Press “ c ” to select a menu option. Press “ a ” or “ b ” to change the setting.
77 Settings 4 76 A A B B For matted xD-Picture Card or internal memor y used for both A and B . 0001 0005 0006 0010 0001 0005 0001 0005 < CONT . >< RENEW > é FRAME NO. Specifies whether frame numbers are assigned consecutively from previous numbers or begin again.
79 Settings 4 78 î AUTO POWER OFF When this function is active and the camera is left unused for 2 or 5 minutes, it turns camera off. Auto power off function prevents leaving the power on. ● ! The Auto power off function is disabled during automatic playing back and when a USB connection is being used.
81 Settings 4 80 TIME DIFFERENCE T I M E D I F F E R E N C E LOCA TION L O C A T I O N : TIME DIFFERENCE T I M E D I F F E R E N C E SET SET TIME DIFFERENCE T I M E D I F F E R E N C E SET S E T CANCEL C A N C E L 1 Press “ d ”. 2 Press “ a ” or “ b ” to select “TIME DIFFERENCE”.
83 Software Installation 5 82 1 Install FinePixViewer as instructed in the Quick start guide. 2 Install DirectX as directed by the on-screen instructions and then restart your PC. If the latest version of DirectX is already installed on your PC, this installation is not performed.
85 Software Installation 5 84 1 Turn your Macintosh on and start up Mac OS X. Do not launch any other applications. 2 When the bundled CD-ROM is loaded into the CD- ROM drive, the “FinePix” icon appears. Double-click the “FinePix” icon to open the “FinePix” volume window.
87 Viewing Images 6 86 5.2 INST ALLA TION ON A Mac OS X 10 The “FinePixViewer installation completed” message dialog appears. Then click exit button and close it. ● ! When Safari is used as the Web browser, a message may be displayed and the CD-ROM may not be removed.
89 Viewing Images 6 88 4 1 Press “ a ” or “ b ” to select “ u PRINT DPOF”. 2 Press “ c ”. ● ! When [ u NOT SET DPOF] appears, the DPOF settings are not specified. ● ! To use DPOF printing, the DPOF settings must be specified on FinePix F470 beforehand ( ➡ P.
91 Viewing Images 6 90 ● ! Press the “DISP/BACK” button to cancel the printing. Depending on the printer, the printing may not be canceled immediately or printing may stop midway through. When printing stops midway, briefly turn the camera off and then on again.
93 Viewing Images 6 92 h When the camera and PC are exchanging data, the self-timer lamp blinks and the indicator lamp blinks orange. h “ ¶ DSC” appears on the LCD monitor. h Auto power off is disabled during USB connection. ● ! Before replacing the xD-Picture Card , always disconnect the camera from the PC.
95 Viewing Images 6 94 6.3.2 Disconnecting the camera 1 Windows Once the image has been saved, the window below appears (Save Image Wizard Windows). To disconnect the camera, click the [Remove] button. Macintosh Once the image has been saved, the window below appears.
97 Viewing Images 6 96 Macintosh 5 When the message appears, click the [OK] button. Check your selection carefully since the process cannot be cancelled once you click the [OK] button. 6 Automatic uninstallation begins. When uninstallation ends, click the [OK] button.
99 98 h AC Power Adapter AC-5VX Use the AC-5VX when taking pictures or play back images for long periods or when FinePix F470 is connected to a PC. ✽ The shape of the AC power adapter, the plug and socket outlet depend on the country.
101 100 Use with the following power supply cord set: Cord: UL Listed, Type SPT-2, No.18 AWG, rated 300V, 10A, minimum 6 ft (1.8m), maximum 10 ft (3m) long. One end terminates in a molded-on, parallel-blade, (non-polarized) attachment plug with a 7A, 125V (NEMA 1-15P) configuration.
103 102 ■ Image Memory Card h This Image Memory Card is a new image recording media ( xD-Picture Card ) developed for digital cameras. The Image Memory Card consists of a semiconductor memory (NAND-type flash memory) to record digital image data.
105 104 Warning Displayed Explanation Remedy An attempt was made to show 5,000 or more images by date sorting. No more than 4,999 images can be shown by date sorting. i A protected file was encountered. i An attempt was made to add a voice memo to protected file.
i Load a new or fully charged battery. i Plug the adapter back in. i Load the battery in the correct direction. i Close the battery cover correctly. Load a new or fully charged battery. i Put the battery in your pocket or another warm place to heat it and then load it into the camera just before you take a picture.
109 108 Power Supply and Others Power supply Use one of the following i Rechargeable Battery NP-40N (included)/NP-40 (sold separately) i AC Power Adapter AC-5VX (sold separately) Guide to the number of available frames for battery operation Camera dimensions (W/H/D) 91.
111 110 Explanation of T erms EV A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film or CCD.
113 112 Croatia I&I d.o.o. Technical support Hondlova 2, Zagreb, Croatia TEL 38512319060 FAX 2310240 dsaravanja@fujifilm.hr Repair service Hondlova 2, Zagreb, Croatia TEL 38512316228 FAX 2310240 info@fujifilm.hr Cyprus PMS IMAGING LTD Technical support & 11, Dighenis Akritas Avenue, P.
115 114 AFRICA Egypt Foto Express Egypt Technical support & 426 Pyramids St., Giza, Egypt Repair service TEL (202) 7762062 FAX (202) 7760169 fotoegypt@access.com.eg Kenya Fuji Kenya Ltd Repair service P.O.Box 41669-00100, Fuji Plaza, Chiromo Road, Nairobi, Kenya.
117 116 CAUTION Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock. Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight.
118 Memo.
26 - 30, Nishiazabu 2 - chome, Minato - ku, Tokyo 106 - 8620, Japan http://home.fujifilm.com/products/digital/ Printed in Japan 1AG6P1P2952-- FPT - 507111.
Ein wichtiger Punkt beim Kauf des Geräts FujiFilm FinePix F470 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie FujiFilm FinePix F470 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für FujiFilm FinePix F470 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von FujiFilm FinePix F470 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über FujiFilm FinePix F470 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon FujiFilm FinePix F470 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von FujiFilm FinePix F470 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit FujiFilm FinePix F470. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei FujiFilm FinePix F470 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
