Benutzeranleitung / Produktwartung A203 des Produzenten FujiFilm
Zur Seite of 67
BL00147-200 ( 1 ) FinePix A203/FinePix A303 7 8 Getting Ready Camera Connection Using FinePixViewer Basic Photography Advanced Features Photography Advanced Features Playbac k Software Installation Se.
2 3 CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4 5 1 2 3 4 5 6 7 8 4 Advanced Features Playback g ADJUSTING THE MONITOR BRIGHTNESS ..... 71 g USING SET–UP .................................................. 72 ■ SET–UP Menu Options (Date/time setting, etc.) .... 73 g POWER SAVE ..............
6 7 Preface ■ Test Shots Prior to Photography For particularly important photographs (such as weddings and overseas trips), always take a test photograph and view the image to make sure that the camera is functioning normally. h Fuji Photo Film Co., Ltd.
8 9 MENU/OK button (P .21) Viewfinder lamp Viewfinder LCD monitor Tr ipod mount Flash button Batter y cov er DISP button (P .19,20) BA CK button (P .21) Batter y compar tment Strap mount (P .9) xD-Picture Card slot Still photograph y mode (P .22) Self-Timer mode (P .
10 11 1 Nomenclature ( Sample display ) Pla yback frame n umber Photograph y mode Flash Date Date Zoom bar Batter y low w arning Pla yback mode Protection DPOF EV White balance AF warning AF frame Mac.
Indicator OPEN Indicator OPEN 12 13 1 1 Slide the battery cover out to open it. 2 Load the batteries correctly as shown. ● ! Do not apply excessive force to the battery cover. LOADING THE BA TTERIES AND xD-Picture Card 0 1 0 2 Do not open the battery cover while the camera is still switched on.
14 15 1 SWITCHING ON AND OFF ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ ＮＯＴ ＳＥＴ ＮＯＴ ＳＥＴ ● ! To set the date and time later, press the “BACK” button. ● ! If you do not set the date and time, this confirmation screen will appear each time you switch the camera on.
17 1 16 SETTING THE DA TE AND TIME ＢＡＣＫ ＢＡＣＫ ＢＡＣＫ Ｏ Ｋ Ｏ Ｋ ＯＫ ＰＯＷＥＲ ＳＡＶＥ ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ ＵＳＢ Ｍ.
18 19 2 2 Basic Photography BASIC OPERA TION GUIDE ( PHOTOGRAPHY ) Select one of the follo wing modes: LCD monitor ON Normally , set the LCD monitor to ON. LCD monitor OFF Switch the LCD monitor OFF to reduce power consumption. Framing Guidelines Display these as a guide to composing your shots.
20 21 2 BASIC OPERA TION GUIDE ( PLA YBACK ) BASIC OPERA TION GUIDE ( MENU ) Select one of the f ollowing 3 modes: Te xt displayed : Normally , use this setting. Te xt not displayed : No te xt is displa yed. Multi-frame playbac k : Displa ys 9 image frames.
22 23 2 1 Slide the “POWER” switch sideways to switch the camera on. 2 Set the Mode dial to “ Q ”. h Photography range: Approx. 60 cm (2 ft.) to infinity 1 0 1 0 2 Brace your elbows against your sides and hold the camera with both hands. Hold the camera so that your right thumb is conveniently positioned for operating the zoom.
24 25 2 To zoom in on the subject, press “ a ” ( } TELE). To zoom out, press “ b ” ( { WIDE). A “zoom bar” appears on the LCD monitor when you zoom in or out.
26 27 2 To take the picture, press the shutter button down fully without lifting your finger off it. The camera beeps and takes the picture, and the data is then recorded. ● ! If you press the shutter button down fully in one motion, the shot is taken without the AF frame changing.
28 29 2 Number of Available Frames Standard number of shots per xD-Picture Card The number of available shots is displayed on the LCD monitor. The number of available shots when the xD-Picture Card is formatted in the camera. ● ! See P.52 for information on changing the Quality (number of recorded pixels).
30 31 2 USING AF/AE LOCK In a shot with this type of composition, the subjects (two people in this case) are not in the AF frame. If the shot is taken at this point, the subjects will not be in focus. Move the camera slightly so that one of the subjects in the AF frame.
32 33 2 LCD monitor OFF LCD monitor ON Framing Guideline displayed FRAMING GUIDELINE FUNCTION This function can be specified in the “ Q ”, “ E ” and “ = ” modes. The mode shown on the LCD monitor switches each time you press the “DISP” button.
34 35 2 c FLASH Press the “ c ” button to select the flash setting. Use the flash mode that best suits your shot. h 5 flash modes: “AUTO” (no icon), “ n ”, “ c ”, “ b ” and “ v ”. h Effective flash range ( A in AUTO mode): Wide-angle: Approx.
36 37 2 This is a flash mode that uses a slow shutter speed. This allows you to take pictures of people at night that clearly show both your subjects and the night time backdrop. v Slow Synchro ● ! The image may be overexposed when you shoot bright scenes.
38 39 2 MUL TI-FRAME PLA YBACK w PLAYBACK MODE ● ! The LCD monitor text display disappears after approximately 3 seconds. ● ! Playback zoom cannot be used with multi-frame playback. In playback mode, the display shown on the LCD monitor switches each time you press the “DISP” button.
40 41 2 ERASING SINGLE FRAME w PLAYBACK MODE 1 Set the Mode dial to “ w ”. 2 Press the “MENU/OK” button to display the menu screen on the LCD monitor. Select “FRAME” in the “ p ” ERASE menu and press the “MENU/OK” button. See P.59 for more information on “ALL FRAMES” and “FORMAT”.
42 43 3 = SELF-TIMER PHOTOGRAPHY When you set the mode dial to “ = ”, “ = ” appears on the LCD monitor. In this mode, a timer runs for roughly 10 seconds before the shutter is released. Use this mode for shots such as photographs of yourself. 1 Position the AF frame over your subject.
44 45 3 Approx. 40.6 min. Approx. 12.9 min. DPC-128 (128 MB) Approx. 20.2 min. Approx. 6.4 min. DPC-64 (64 MB) Approx. 10.1 min. Approx. 191 sec. DPC-32 (32 MB) Approx.
46 47 3 ＲＥＣ ＲＥＣ ５９ｓ ５９ｓ ● ! Once the remaining time runs out, movie recording automatically stops and the movie is stored on the xD-Picture Card. During shooting, “ h REC” appears on the LCD monitor with a counter showing the remaining time displayed in the top-right corner.
48 49 3 ＡＵＴＯ ＡＵＴＯ ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ ＭＡＮＵＡＬ ＭＡＮＵＡＬ ＯＰＴＩＯＮ ＯＰＴＩＯＮ 2 0 3 0 1 0 2 1 1 Press the “MENU/OK” button to display the menu.
50 51 3 PHOTOGRAPHY MENU OPTIONS Still/Macro/Self Timer Mode When you press the “MENU/OK” button in the “ Q ”, “ E ” or “ = ” mode, one of the menu screens shown below appears, allowing you to specify the respective settings.
52 53 3 y SETTING THE QUALITY PHOTOGRAPHY MENU ✽ Displaying the menus ( ➡ P.50) FinePix A203: Photography ( Q , E , = ) Any of 4 settings can be selected.
54 55 3 AUTO: Automatic adjustment (Shooting to show the ambience of the light source) 6 : Shooting outdoors in fine weather 7 : Shooting in shade 9 : Shooting under “Daylight” fluorescent lamps 0.
56 57 4 ◆ Playing back movie files ◆ The movie automatically stops when playback ends. Playback Control Description Pauses the movie during playback.
58 59 4 1 Use “ a ” or “ b ” to select “FRAME”, “ALL FRAMES” or “FORMAT”. 2 Press “MENU/OK” button to confirm your selection. ＦＲＡＭＥ ＦＲＡＭＥ ＦＲＡＭＥ .
60 61 4 FORMAT ＦＯＲＭＡＴ ＦＯＲＭＡＴ ＦＯＲＭＡＴ ＯＫ？ ＦＯＲＭＡＴ ＯＫ？ ＥＲＡＳＥ ＥＲＡＳＥ ＡＬＬ ＤＡＴＥ ＡＬＬ ＤＡＴＥ Press the “MENU/OK” button to erase all the images and initialize the xD-Picture Card.
62 63 4 1 Use “ a ” or “ b ” to select “FRAME SET/RESET”, “PROTECT ALL” or “UNPROTECT ALL”. 2 Press “MENU/OK” button to confirm your selection. ＦＲＡＭＥ ＳＥＴ／ＲＥＳＥＴ ＰＲＯＴＥＣＴ ＰＲＯＴＥＣＴ 0 1 0 2 Protects or unprotects only the selected image.
64 65 4 PROTECT ALL Pressing the “MENU/OK” button protects all the images. ＰＲＯＴＥＣＴ ＡＬＬ ＰＲＯＴＥＣＴ ＡＬＬ ＯＫ？ ＯＫ？ Ｉ.
66 67 4 1 0 1 0 2 ＤＡＴＥ ＯＦＦ ＤＡＴＥ ＯＦＦ ＯＫ ＯＫ ＤＰＯＦ ＤＰＯＦ 2 Continued over page... 1 Set the Mode dial to “ w ”. 2 Press the “MENU/OK” button to display the menu screen. Use “ d ” or “ c ” to select “ i ” DPOF.
68 69 4 3 5 ＤＰＯＦ ＤＰＯＦ ＢＡＣＫ ＢＡＣＫ Ｏ Ｋ ＯＫ ＮＯ ＮＯ ＮＯ ＮＯ ＹＥＳ ＹＥＳ ＦＩＮＩＳＨ ＦＩＮＩＳＨ 0 1 0 2 ＮＯ ＮＯ ＹＥＳ ＹＥＳ ＦＩＮＩＳＨ ＦＩＮＩＳＨ ＤＰＯＦ ＤＰＯＦ Ｏ Ｋ ＯＫ 6 Continued over page.
71 5 70 5 Settings g ADJUSTING THE MONITOR BRIGHTNESS 1 Press the “MENU/OK” button to display the menu screen. 2 Press “ d ” or “ c ” to select “ g ” OPTION and then press “ a ” or “ b ” to select “LCD BRIGHTNESS”. 3 Press the “MENU/OK” button.
72 73 5 ■ SET–UP Menu Options (Date/time setting, etc.) Settings Display Explanation POSTVIEW USB MODE POWER SAVE DATE/TIME ON/OFF DSC/PC CAM ON/OFF SET This option specifies whether or not an image checking screen (photography results) is displayed after you take a shot.
75 6 Software needed f or playing bac k movies, etc. Launches the FinePixViewer software when a camera is connected. Software used to read PDF-f ormat documents on a personal computer . This software is needed to read the User’ s Guides for FinePixViewer .
76 77 6 Launching the Installer Manually 1. Double-click the “My Computer” icon. ✽ Windows XP users should click “My Computer” in the “Start” menu. 2. Right-click “FINEPIX” (CD-ROM drive) in the “My Computer” window and select “Open”.
78 79 6 6. Install QuickTime as directed by the on- screen instructions. ✽ If you have already installed QuickTime version 5.0.2 or later, this installation is not performed.
80 81 6 2. Double-click “Installer for MacOS8.6-9.x” to launch the Installer. 3. The Installer setup screen appears. Click the [Installing FinePixViewer] button. ✽ For more information on what is installed, click the [Read Me First] button and [Using FinePixViewer] button.
82 83 6 8. After you restart your Macintosh, the “FinePixViewer installation completed” message appears. Click “Using FinePixViewer” to view the basic FinePixViewer functions.
84 85 6 9. Select the Mac OS X startup disk as the installation destination and click the [Continue] button. 10 . Click the [Install (upgrade)] button. 11 . When you have completed the installation, click the [Restart] button. 6.4 Installation on a Mac OS X 6.
DC IN 3V socket AC power adapter ✽ 86 87 7 7.1 Using the optional AC Power adapter Always use a FUJIFILM AC Power Adapter AC-3V ( ➡ P.106). Use the AC power adapter to avoid losing power at inconvenient times, such as when you are downloading photographed images to your computer.
88 89 7 ■ Camera Operation i When the camera and computer are exchanging data, the self timer lamp flashes and the viewfinder lamp flashes alternately green and orange. i “DSC” appears on the screen. i Power Save and Auto Power Off are disabled during USB connection.
90 91 7 A C power adapter ✽ Camera (USB) socket ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ ＵＳＢ ＭＯＤＥ ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ ＯＮ .
92 93 7 If the “Digital Signature Not Found” dialog box appears, click the [Yes] button. The USB PC Camera Driver is installed automatically. When the following screen appears, click the [Continue] button. 3. FinePixViewer starts up automatically and the live image is displayed.
94 95 7 A C power adapter ✽ Camera (USB) socket 1. Switch the camera off. 2. Unplug the special USB cable from the camera. ✽ When you drag the icon to the Trash, “ ≠ ” appears on the camera’s LCD monitor. 3 3. The menu option shown below appears.
96 97 8 4. Check that the files are downloaded from the camera to your computer and that a folder with the photography date is created. Open the folder as shown below. To open a folder, click on the plus “ ” symbol (Windows) or arrow “ ” (Macintosh) to the left of the folder.
98 99 8 To use the FinePix Internet services, users must first register. ✽ Follow the steps below to register. Users can be registered for free. 1. Launch FinePixViewer. 2. Click the [Register Now] button. 3. The “User’s Registration for Internet Services” dialog box opens.
101 8 100 3. Select “User’s registration” and click the [OK] button. ✽ If you are not already connected to the Internet, connect now. (A dial-up dialog box may be displayed.) ✽ Only select menu acquisition if you have already completed the user registration process and you have re-installed “FinePixViewer”, etc.
102 103 8 8.5 Uninstalling the Software Only perform this operation when you no longer require the installed software or when the software was not installed correctly. 1. Switch on your PC. 2. Disconnect the camera ( ➡ P.94, 95). 3. Quit all currently running applications.
105 104 Only perform this operation when you no longer require the installed software or when the software was not installed correctly. ■ Uninstalling Mass Storage Driver and PC Camera Driver 1. Check that the camera is not connected to your Macintosh.
106 107 h DPC-R1 Image Memory Card Reader The DPC-R1 provides a quick and easy way to transfer images back and forth between your PC and an image memory card (xD-Picture Card and SmartMedia). The DPC-R1 uses the USB interface for high-speed file transfer.
108 109 h AA-size alkaline, Ni-MH (nickel-metal hydride) can be used with this camera. Do not use AA-size manganese, lithium or nickel- cadmium (Ni-Cd) batteries in your FinePix A203/ FinePix A303 because the heat generated by the batteries could damage the camera or cause malfunctions.
110 111 Use only the AC-3V AC Power Adapter with your FinePix A203/FinePix A303 Digital Camera. The use of other AC power adapters may result in damage to your camera. h This AC power adapter is designed exclusively for indoor use. h Plug the connection cord plug securely into the DC input terminal of the FUJIFILM Digital camera.
112 113 could result in damage to the xD-Picture Card. h The use of xD-Picture Cards is recommended with the FinePix A203/FinePix A303. The camera quality cannot be guaranteed when cards other than those manufactured by FUJIFILM are used.
114 115 (Lit red) (Blinking red) i The data could not be recorded due to a xD-Picture Card error or a connection error between the xD-Picture Card and camera. i The photographed image cannot be recorded because the xD-Picture Card is full. i Reload the xD-Picture Card or switch the camera off and then on again.
116 117 A protected frame was encountered. Protected files cannot be erased. Unprotect the image. T roubleshooting e If you think the camera is faulty, check the following once more Problem Cause Remedy No power. i The battery is exhausted. i The AC power adapter plug has come out of the power outlet.
118 119 Problem Cause Remedy Nothing happens when I use the Mode dial. i Camera malfunction. i The batteries exhausted. i Briefly remove the batteries or disconnect the AC power adapter. Then reload the batteries or reconnect the AC power adapter and try again.
120 121 Specifications ( FinePix A203 ) ■ Standard number of available shots/recording time per xD-Picture Card DPC-16 (16 MB) DPC-32 (32 MB) DPC-64 (64 MB) DPC-128 (128 MB) Quality Mode Image Data Size 2M • F 2M • N Approx. 620 KB Approx. 390 KB 25 39 50 79 101 204 159 319 Approx.
122 123 ■ Standard number of available shots/recording time per xD-Picture Card DPC-16 (16 MB) DPC-32 (32 MB) DPC-64 (64 MB) DPC-128 (128 MB) Quality Mode Image Data Size 3M • F 3M • N Approx. 1300 KB Approx. 590 KB 12 26 25 53 50 102 107 215 Approx.
124 125 When a fault arises, switch the camera off and then remove the batteries and disconnect the AC power adapter. Continued use of the camera when it is emitting smoke, is emitting any unusual odor, or is in any other abnormal state can cause a fire or electric shock.
126 127 Safety Notes Never attempt to modify or disassemble the camera. (Never open the casing.) Do not use the camera when it has been dropped or the casing is damaged. This can cause a fire or electric shock. ● Contact your FUJIFILM dealer. Never attempt to take pictures while in motion.
128 129 EC Declaration of Conformity We Name : Fuji Photo Film ( Europe ) G.m.b.H. Address : Heesenstrasse 31 40549 Dusseldorf, Germany declare that the product Product Name : FUJIFILM DIGITAL CAMERA FinePix A203/FinePix A303 Manufacture’s Name : Fuji Photo Film Co.
130 131 IMPORTANT Be sure to read this page before using theSoftware. NOTICE BEFORE OPENING THE PACKAGE OF CD-ROM PROVIDED BY FUJI PHOTO FILM CO., LTD., PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY. ONLY IF YOU DO AGREE TO THIS AGREEMENT, YOU WILL BE ABLE TO USE THE SOFTWARE RECORDED ON THE CD-ROM.
Printed in Japan FGS - 204107 - FG Printed on recycled paper. 26 - 30, Nishiazabu 2 - chome, Minato - ku, Tokyo 106 - 8620, Japan.
Ein wichtiger Punkt beim Kauf des Geräts FujiFilm A203 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie FujiFilm A203 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für FujiFilm A203 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von FujiFilm A203 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über FujiFilm A203 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon FujiFilm A203 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von FujiFilm A203 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit FujiFilm A203. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei FujiFilm A203 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
