Benutzeranleitung / Produktwartung cm45 s des Produzenten Frymaster
Zur Seite of 26
Frymaster, a member of the Co mmercial Food Equipment Serv ice Association, recommends using CFESA Certified Tech nicians. Price: $6.00 24-Hour Service Hotline 1-800-551-8633 819-5899 DEC 2005 *819589.
Table of C ontents 1-A Operational Overview 1-1 Computer Setup, Standard Mode 2-1 Programming for Segmented Cooking with F iltration 3-1 Programming for Non-Segmented Cooking with Filtration 3-5 Filte.
CM4-S Cook ing Computer — O vervie w 1-1 Programming Overview An example of a 13-minute cook c ycl e with four cooking temperatures is detailed in the graphic below. The cooktime and points a t which the tempera ture will change are entered in f our steps in this example.
CM4-S Cook ing Computer — O vervie w 1-2 The CM4-S can cook in segmente d and non-segmented cook c ycles with or without automatic filter prompts. I t is also programmable to exit a cook cycle in on.
CMS-4 C ooking C omputer 2-1 Computer Setup 1. Press . Display reads OFF. 2. Press programming button in Fryma ster logo . 3. Code appears in left display; right display is blank. 4. Use product keys to enter 1656 . 5. Left display shows OK Tone ; right shows 1000HZ.
CMS-4 C ooking C omputer 2-2 23. Use product buttons to set temperature the fr ye r will ex it the melt cycle and heat continuously to setpoint. 24. Press to lock in choice. 25. Melt On appears in left displa y ; a number appears in the ri ght. 26. Use product buttons to enter the time, in seconds, the burners will be on during the melt cycle.
CM4-S Cook ing Computer — Pr ogram ming with Fi ltratio n 3-1 12345 6 7 8 9 10 CM4- S 12 3 4 5 6 7 8 9 1 0 ON/ OFF Temp Pro du ct B utton s Ex it Co ol Checkmark Program ming Key No t vis ible Product Buttons Program ming for Segm ented Cook ing Cycles (Filter M ode) 1.
CM4-S Cook ing Computer — Pr ogram ming with Fi ltratio n 3-2 13. Enter 1650 using numbered product keys. Use button 10 for 0. 14. Product shows in left display . All product buttons blink. Right display is blank. 15. Press the product button you want to program.
CM4-S Cook ing Computer — Pr ogram ming with Fi ltratio n 3-3 33. Press to lock in choice. 34. Segment appears in left display; Prod 1 in right. The LED in the product button 1 continues to flash. All others are dark. 35. Press product button 2 . The LED in product button 2 flashes.
CM4-S Cook ing Computer — Pr ogram ming with Fi ltratio n 3-4 52. Press . 53. Segment appears in left display; Prod 1 in right 54. Press product button 4 . 55. Cooktime appears in left display; 0 appears in the right. 56. Subtract desired time for second cook segment from remaining cooktime.
CM4-S Cook ing Computer — Pr ogram ming with Fi ltratio n 3-5 Program ming for non-Se gmented Cook ing (Filter ing Mod e) 1. Establish the number of cook cycles before th e computer prompts a filter cy cle. 2. Press , the ON/OFF button to turn the computer off.
CM4-S Cook ing Computer — Pr ogram ming with Fi ltratio n 3-6 23. Press to lock in cooktime . 24. **Set-Temp appears in left display; 0 or a previously entered temperature appears in the r ight display. 25. Use product keys to enter the cooking temperatu re for the final segment of the cooking cycle.
CM4-S Cooking Computer — Pr ogramming with Filtration 3-7 Filter Operation The computer must be connected to the drain valve safety switch in order to function as described at right. To clear a computer programmed for global filtering and not connected to the fryer’s filter system: • Press to turn computer off.
CM4-S Cook ing Computer —Pro gr am ming for non-Filtering 4-1 Program ming for Segm ented Cook ing Cycles (Non-Filtering Mode) 1. Establish the total cooktime and the number and temperatures of the cook segments for your product. You will find drawing a diagram helpful.
CM4-S Cook ing Computer —Pro gr am ming for non-Filtering 4-2 10. Segment appears in left display, PROD and number of the product button being progra mmed appears in right.
CM4-S Cook ing Computer —Pro gr am ming for non-Filtering 4-3 30. Set-Temp appears in left display and 0 or a previously programmed te mperature appe ars in the right. 31. Use product keys to enter the cooking temperatu re for the first temperature change.
CM4-S Cook ing Computer —Pro gr am ming for non-Filtering 4-4 52. Press . Sens appear s in the left display; 0 or a previously set sensitivity s etting a ppears in the righ t. 53. Use product keys to enter sensitivity. 54. Press . 55. Segment appears in left display; Prod 1 in right.
CM4-S Cook ing Computer —Pro gr am ming for non-Filtering 4-5 Program ming for non-Se gmented Cook ing (Non-Filtering Mode) 1. Press , the ON/OFF button to turn computer off. 2. Display shows OFF . 3. Press hidden progr amming button in Fryma ster logo.
CM4-S Cook ing Computer —Pro gr am ming for non-Filtering 4-6 21. Press . 22. Sens appear s in the left display ; 0 or a previously set number up to 9 appears in the right. 23. Use product buttons to set sensitivity, which is the degree to which the computer reacts to the introduction of cold product to the heated oil.
CM4-S C ooking C omputer — A larm P rogramm ing 5-1 1. B e g i n h e r e a f t e r r e a c h i n g 1. After reachin g the first displ ay of Segment on the computer when programing for an y mode of operation, follow these steps to set audible alarms in the cook cycle.
CM4-S C ooking C omputer — A larm P rogramm ing 5-2 7. To exit alarm prog ramming, press hidden progra mming button twice. Ex Cycle , which is de scribed in section 6, will display on the computer at the first push. On the second button push the computer will revert to segm ent and product number.
CM4-S Cook ing Computer Exit-M ode Program ming 6-1 1. After reachin g the first display of Segment on the computer when programming for any mode of operation, follow these steps to set the status the fry vat will assume upon the completion of a cooking cycle.
Toggle fr om F ahrenheit to Ce lsius 7-1 1. Press , the ON/OFF button to turn computer off. 2. Display shows OFF . 3. Press hidden progr amming button in F rymaster logo. (See diagram page 2-2). 4. Display shows CODE on left side. 5. Enter 1650 using numbered product keys.
Operation al and Dia gnostic P rogramm ing Codes 8-1 Entry Codes All code s are preced ed by this sequ ence: Pre ss . Com p uter displays OFF. Pre ss pro grammi ng key i n Frymaste r logo . Code appears in left displa y. Use product keys to enter access codes .
Operational and Diagnostic Programming Codes 8-2 The computer also displays messages. Listed below are the most comm on and a brief explanation of each. Set Back Fryer is in standby and maintainin g a temperature of 250°F. Press to exit and bring fry er to set point.
Frymaster, L.L.C. 8700 Line Avenue, Shreveport, Louisiana USA 7110 6 Service Center (800) 5 51 -8633 or (318) 865-1711 Printed in the United States of America 819-5899 English 12/05.
Ein wichtiger Punkt beim Kauf des Geräts Frymaster cm45 s (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Frymaster cm45 s noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Frymaster cm45 s - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Frymaster cm45 s reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Frymaster cm45 s erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Frymaster cm45 s besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Frymaster cm45 s verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Frymaster cm45 s. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Frymaster cm45 s gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
